RESUMEN
Incontrovertibly there is an increasing demand for the development of benign inks suitable for fabrication of high-performing perovskite-based thin film functional layers. Nevertheless, most reported perovskite precursors rely on the use of highly toxic solvents such as acetonitrile, 2-methoxyethanol, dimethylformamide, and many others. Hence, there is a strong imperative for the development of novel and greener inks, which will facilitate smoother commercialization of technologies based on functional perovskite films. Therefore, four perovskite precursors are studied, some of which consist of up to 90% ethanol. All inks are developed to fulfill the requirements of a high-throughput deposition compatible with roll-to-roll techniques at room temperature, assisted by an air knife for instant solvent removal. Two of the inks are particularly suitable for the fabrication of high-quality and densely packed multi-crystalline (CH3 NH3 )PbI3 layers, as confirmed by numerous nanoscale spectroscopic and material characterization techniques. Additionally, large-area photoluminescence (PL) imaging is demonstrated to improve the quality of the deposited perovskite films, with a route to enhance deposition uniformity when upscaling for manufacture. The genuine potential of the developed greener perovskite inks is demonstrated with the fabrication of solar cells with power conversion efficiencies above 19.5%.
RESUMEN
Halide perovskite materials have been extensively explored for their unique electrical, optical, magnetic, and catalytic properties. Most notably, solar cells based on perovskite thin films have improved their power conversion efficiency from 3.8% to over 25% during the last 12 years. However, it is still a challenge to develop a perovskite-based ink, suitable for upscaling the fabrication process of high-quality perovskite films with extreme purity, good crystallinity, and complete coverage over the deposition area. This is particularly important if the perovskite films are to be used for the scaled production of optoelectronic devices. Therefore, to make halide perovskites commercially available for various applications, it is vital to develop a reliable and highly robust deposition method, which can then be transferred to industry. Herein, the development of perovskite precursor inks suitable for use at low-temperature and vacuum-free solution-based deposition processes is reported. These inks can be further tailored according to the requirements of the deposition method, i.e., we propose their use with the industrially viable deposition technique called "slot-die coating". Furthermore, a route for the preparation of low-cost and high-volume manufacturing of perovskite films on both rigid and flexible substrates is suggested in this paper. The presented approach is suitable for the fabrication of any functional layers of perovskites, that can be employed in various scaled applications, and it seeks the potential and the methodology for perovskite film deposition that is scalable to industrial standards.
RESUMEN
Organic-inorganic halide perovskite solar cells (PSCs) have shown a significant growth in power conversion efficiencies (PCEs) during last decade. Progress in device architecture and high-quality perovskite film fabrication has led to an incredible efficiency over 25% in close to a decade. Developments in solution-based thin film deposition techniques for perovskite layer preparation in PSCs provide low cost and ease of process for their manufacturing, making them a potential contender in future solar energy harvesting technologies. From small area single solar cells to large area perovskite solar modules, solvents play crucial roles in thin film quality and therefore, the device performance and stability. A comprehensive overview of solvent engineering toward achieving the highest qualities for perovskite light absorbing layers with various compositions and based on different fabrication processes is provided in this review. The mechanisms indicating the essential roles a solvent, or a solvent mixture can play to improve the crystallinity, uniformity, coverage and surface roughness of the perovskite films, are discussed. Finally, the role of solvent engineering in transferring from small area laboratory scale PSC fabrication to large area perovskite film deposition processes is explored.
RESUMEN
Semiconducting molecules have been employed to passivate traps extant in the perovskite film for enhancement of perovskite solar cells (PSCs) efficiency and stability. A molecular design strategy to passivate the defects both on the surface and interior of the CH3 NH3 PbI3 perovskite layer, using two phthalocyanine (Pc) molecules (NP-SC6 -ZnPc and NP-SC6 -TiOPc) is demonstrated. The presence of lone electron pairs on S, N, and O atoms of the Pc molecular structures provides the opportunity for Lewis acid-base interactions with under-coordinated Pb2+ sites, leading to efficient defect passivation of the perovskite layer. The tendency of both NP-SC6 -ZnPc and NP-SC6 -TiOPc to relax on the PbI2 terminated surface of the perovskite layer is also studied using density functional theory (DFT) calculations. The morphology of the perovskite layer is improved due to employing the Pc passivation strategy, resulting in high-quality thin films with a dense and compact structure and lower surface roughness. Using NP-SC6 -ZnPc and NP-SC6 -TiOPc as passivating agents, it is observed considerably enhanced power conversion efficiencies (PCEs), from 17.67% for the PSCs based on the pristine perovskite film to 19.39% for NP-SC6 -TiOPc passivated devices. Moreover, PSCs fabricated based on the Pc passivation method present a remarkable stability under conditions of high moisture and temperature levels.
RESUMEN
We demonstrate a molecular design strategy to enhance the efficiency of phthalocyanine (Pc)-based hole-transporting materials (HTMs) in perovskite solar cells (PSCs). Herein, two titanyl phthalocyanine (TiOPc) derivatives are designed and applied as dopant-free HTMs in planar n-i-p-structured PSCs. The newly developed TiOPc compounds possess eight n-hexylthio groups attached to either peripheral (P-SC6-TiOPc) or nonperipheral (NP-SC6-TiOPc) positions of the Pc ring. Utilizing these dopant-free HTMs in PSCs with a mixed cation perovskite as the light-absorbing material and tin oxide (SnO2) as the electron-transporting material (ETM) results in a considerably enhanced efficiency for NP-SC6-TiOPc-based devices compared to PSCs using P-SC6-TiOPc. Hence, all of the photovoltaic parameters, including power conversion efficiency (PCE), fill factor, open-circuit voltage, and short-circuit current density, are remarkably improved from 5.33 ± 1.01%, 33.34 ± 3.45%, 0.92 ± 0.18 V, and 17.33 ± 2.08 mA cm-2 to 15.83 ± 0.44%, 69.03 ± 1.59%, 1.05 ± 0.01 V, and 21.80 ± 0.36 mA cm-2, respectively, when using the nonperipheral-substituted TiOPc derivative as the HTM in a PSC. Experimental and computational analysis suggests more compact molecular packing for NP-SC6-TiOPc than P-SC6-TiOPc in the solid state due to stronger π-π interactions, leading to thin films with better quality and higher performance in hole extraction and transportation. PSCs with NP-SC6-TiOPc also offer much higher long-term stability than P-SC6-TiOPc-based devices under ambient conditions with a relative humidity of 75%.
RESUMEN
Boron subphthalocyanine (SubPc) has special physical and chemical properties, originating from its non-centrosymmetric, near-planar taper structure and large conjugated system; it can act as an alternative to the small molecule hole-transporting material 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene in perovskite solar cells (PSCs). To achieve a higher solubility in common organic solvents and a more suitable highest occupied molecular orbital energy level that aligns with the valence band of the perovskite material, a SubPc molecule with a hexamethyl substitution at its peripheral position (Me6-SubPc) was successfully designed and synthesized in a one-step method. Completely solution processed PSCs were fabricated with only a small hysteresis, a power conversion efficiency of 6.96% and Voc of 0.986 V.
RESUMEN
SnO2 was recently employed as an efficient electron-transport layer (ETL) in perovskite solar cells (PSCs) and high power conversion efficiencies (PCEs) have been reported. However, it is still challenging to fabricate SnO2 thin films through facile solution-based synthesis at low temperature (<150 °C) to be compatible with the large scale module fabrication, especially for flexible devices. Here, we report a low temperature solution-based method for preparation of SnO2 nanoparticles. Ultrasonic-assisted wet chemistry synthesis of ultrafine SnO2 nanocrystals with particle size ranging from 2 to 5â nm was achieved by employing a SnCl4 â 5 H2 O solution in a mixed ethanol-water solution and with no annealing step. The crystallinity and microstructure of the SnO2 nanoparticles were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM), as well as selected area electron diffraction (SAED) analysis. The added water in ethanol and increased pH values were demonstrated as two key factors to successful fabrication of highly crystallized samples with high reproducability. An efficiency of 16.56 % was achieved for PSCs based on SnO2 nanoparticles synthesized by ultrasonic-assisted wet chemistry.
RESUMEN
The catalyzed luminol chemiluminescent reaction has received a great amount of attention because of its high sensitivity and low background signal which make the reaction an attractive analytical chemistry tool. The present study, introduces the beneficial catalytic effects of dinuclear Cu(II) complex [Cu2L2(TAE)]X2, where TAE=tetraacetylethane; L=N,N(')-dibenzylethylenediamine and X=ClO4 on the luminol chemiluminescent reaction as a novel probe for the determination of glutathione (GSH) and L-cysteine (CySH) in human serum and urine. The [Cu2L2(TAE)]X2 has exhibited highly efficient catalytic activity of luminol CL as an artificial peroxidase model at pH as low as 7.5 in water in the presence of H2O2â GSH and CySH can induce a sharp decrease in CL intensity from the [Cu2L2(TAE)]X2-catalyzed luminol system. Under the selected experimental conditions, a linear relationship was obtained between the CL intensity and the concentrations of GSH and CySH in the range of 1.0×10(-7)-1.0×10(-4) M, with detection limits (S/N=3) of 2.7×10(-8) and 6.8×10(-8) M and RSD<4.2% (n=7) for GSH and CySH, respectively.