Study on the Long-Term Salt Release Characteristics of Self-Melting Ice Asphalt Mixtures and Their Impact on Pavement Performance.

Self-melting ice asphalt pavement materials inhibit pavement freezing and improve driving safety. This paper aims to study the long-term salt release characteristics of self-melting ice asphalt mixtures and the impact on pavement after complete salt release. Firstly, a method to accelerate the rapid release of salt based on the Los Angeles abrasion tester. Then, long-term salt release patterns were elucidated under the influence of deicing agent dosage, type of asphalt, and type of gradation. Finally, a quantitative analysis of the pavement performance after complete salt release is conducted. The results indicate that the release efficiency of the Los Angeles abrasion tester method has increased by 91 times compared to the magnetic stirrer immersion flushing method and by 114 times compared to the natural soaking method. The SBS-modified self-melting ice asphalt mixture possesses a longer duration of salt release, but the uniformity of salt release is inferior. Salt release duration is directly proportional to the dosage of deicing agents. SMA-13 self-melting ice asphalt mixture exhibits poorer uniformity in salt release. After complete salt release, high-temperature stability of self-melting ice asphalt mixtures decreased by 31.6%, low-temperature performance decreased by 15.4%, water stability decreased by 26.7%, and fatigue life decreased by 35.9%.

Artificially prepared Reclaimed Asphalt Pavement (RAP)-an experimental investigation on re-recycling.

In this paper, the possibility of using different amounts of re-recycled (repeated recycled) Reclaimed Asphalt Pavement (RAP) in the asphalt mixture was experimentally investigated. First, a single virgin mixture was prepared and artificially aged to simulate the first generation of RAP to be used for designing the first generation of recycled mixtures. Next, the recycled mixtures were further aged to obtain a second generation of RAP to be mixed for preparing the second generation of recycled mixtures with and without the contribution of a rejuvenator. The fatigue behavior and low-temperature properties of all asphalt mixtures were experimentally investigated based on the cylindrical indirect tensile test (CIDT), Bending Beam Rheometer (BBR) mixture creep stiffness tests, and Semi-Circular Bending (SCB) fracture tests, respectively. Results indicate that re-recycled materials designed with and without rejuvenator show inferior fatigue behavior with respect to the first generation of recycled mixtures while exhibiting better performance than the virgin material. Meanwhile, poorer low-temperature creep properties were observed for the mixture prepared with recycled and re-recycled RAP. Fracture properties comparable with those of the virgin material were obtained only for re-recycled mixtures designed with rejuvenator. The present experimental work provides evidence on the possibility of using re-recycled RAP up to 40% when rejuvenators are included in the mix design.

Mechanical Performance of Asphalt Mortar Containing Hydrated Lime and EAFSS at Low and High Temperatures.

In this paper, the possibility of improving the global response of asphalt materials for pavement applications through the use of hydrated lime and Electric Arc-Furnace Steel Slag (EAFSS) was investigated. For this purpose, a set of asphalt mortars was prepared by mixing two different asphalt binders with fine granite aggregate together with hydrated lime or EAFSS at three different percentages. Bending Beam Rheometer (BBR) creep tests and Dynamic Shear Rheometer (DSR) complex modulus tests were performed to evaluate the material response both at low and high temperature. Then, the rheological Huet model was fitted to the BBR creep results for estimating the impact of filler content on the model parameters. It was found that an addition of hydrated lime and EAFSS up to 10% and 5%, respectively, results in satisfactory low-temperature performance with a substantial improvement of the high-temperature behavior.