Restoration of hip anatomy using computer modelling prior to total hip arthroplasty and its potential consequences in terms of lower limb-length difference.

BACKGROUND: Restoring hip anatomy during total hip arthroplasty (THA) is the gold standard. The general goal is for hips to be symmetrical in terms of height. This study aimed to analyse the effect of simulating hip length (HL) equalisation on leg-length difference (LLD) before and after THA with a computerised plan. METHODS: 141 consecutive patients were enrolled following THA. Outcomes of interest were preoperative hip-length difference (HLD) and LLD as determined on CT and final LLD as determined by simulating HL equalisation. We divided patients into 3 groups: no LLD, LLD >5 mm and LLD ⩾10 mm. RESULTS: The rate of preoperative LLD >5 mm and LLD ⩾10 mm was 37.5% and 14.8%, respectively. HL equalisation did not change LLD distribution in the overall cohort. Among patients with smaller preoperative HLs and LLDs, HL equalisation changed the rate of LLD >5 mm from 100% (n = 24) to 41.7% (n = 10) (p < 0.0001) and of LLD ⩾10 mm from 100% (n = 12) to 16.7% (n = 2) (p < 0.0001). Among patients with no preoperative LLD, HL equalisation changed the rate of LLD ⩽5 mm from 100% (n = 64) to 59.3% (n = 38) (p < 0.0001) and of LLD<10 mm from 100% (n = 76) to 89.5% (n = 68) (p = 0.006). CONCLUSIONS: Restoring biomechanical hip anatomy by HL equalisation may not be the correct goal for all patients. In patients with no LLD and shorter HLs, equalisation could result in LLD >5 mm in 40% of patients and LLD >10 mm in 10%, demonstrating the necessity to further analyse individuals and propose a personalised stem position.

Accuracy of Preoperative 3D vs 2D Digital Templating for Cementless Total Hip Arthroplasty Using a Direct Anterior Approach.

Background: An important aspect of preoperative planning for total hip arthroplasty is templating. Although two-dimensional (2D) templating remains the gold standard, computerized tomography (CT)-based three-dimensional (3D) templating is a novel preoperative planning technique. This study aims to compare the accuracy of a 2D and 3D plan using an anterior approach for the placement of the same uncemented prosthesis. Methods: Two consecutive cohorts of 100 patients each were retrospectively analyzed. We analyzed the accuracy of the size of the implant (stem, cup, head), the length of head, and offset. As a secondary criterion, we analyzed the rates of stems with more than 3° of varus, fracture, and/or subsidence at 3 months postoperatively. Results: Within the exact size, the accuracy of the stem and cup size with the 2D plan was 69% and 56%, respectively. With the 3D plan accuracy being 88% (P = .0046) and 96% (P < .0001), respectively. Regarding size and length of the implant head, accuracy was 86% and 82% with the 2D plan and 100% (P < .0001) and 94% (P = .016), respectively, with the 3D plan. The offset of the implants increased beyond 3 mm in 23% of patients in the 2D group and in 5% of patients in the 3D group (P = .0003). The rate of varus stems was 10% in the 2D group and 2% in the 3D group (P = .03). Two fractures and one case of subsidence occurred in the 2D group. None were identified in the 3D cohort. Conclusions: A CT-based 3D plan is more accurate for implant size selection, allows better prosthetic offset, and reduces the rate of varus stems.

Low pelvic incidence with low lordosis and distal apex of lumbar lordosis associated with higher rates of abnormal spinopelvic mobility in patients undergoing THA.

Aims: The risk factors for abnormal spinopelvic mobility (SPM), defined as an anterior rotation of the spinopelvic tilt (∆SPT) ≥ 20° in a flexed-seated position, have been described. The implication of pelvic incidence (PI) is unclear, and the concept of lumbar lordosis (LL) based on anatomical limits may be erroneous. The distribution of LL, including a unusual shape in patients with a high lordosis, a low pelvic incidence, and an anteverted pelvis seems more relevant. Methods: The clinical data of 311 consecutive patients who underwent total hip arthroplasty was retrospectively analyzed. We analyzed the different types of lumbar shapes that can present in patients to identify their potential associations with abnormal pelvic mobility, and we analyzed the potential risk factors associated with a ∆SPT ≥ 20° in the overall population. Results: ΔSPT ≥ 20° rates were 28.3%, 11.8%, and 14.3% for patients whose spine shape was low PI/low lordosis (group 1), low PI anteverted (group 2), and high PI/high lordosis (group 3), respectively (p = 0.034). There was no association between ΔSPT ≥ 20° and PI ≤ 41° (odds ratio (OR) 2.01 (95% confidence interval (CI)0.88 to 4.62), p = 0.136). In the multivariate analysis, the following independent predictors of ΔSPT ≥ 20° were identified: SPT ≤ -10° (OR 3.49 (95% CI 1.59 to 7.66), p = 0.002), IP-LL ≥ 20 (OR 4.38 (95% CI 1.16 to 16.48), p = 0.029), and group 1 (OR 2.47 (95% CI 1.19; to 5.09), p = 0.0148). Conclusion: If the PI value alone is not indicative of SPM, patients with a low PI, low lordosis and a lumbar apex at L4-L5 or below will have higher rates of abnormal SPM than patients with a low PI anteverted and high lordosis.

Three-dimensional-printed patient-specific Kirschner-wire guide for percutaneous fixation of undisplaced scaphoid fractures: a cadaveric study.

Undisplaced scaphoid waist fractures can be managed by percutaneous fixation. The purpose of this study is to compare percutaneous fixation using a three-dimensional (3-D)-printed guide with the conventional method in a cadaveric study. Twelve wrists were divided into two groups: standard fluroscopic technique group, and a patient-specific 3-D-printed guide group. In the patient-specific group, using high resolution CT scans, we manufactured a mould-guide including a wire guide sleeve aligned with the planned ideal path, and 3-D printed it. On postoperative CT scans we measured the angular deviation of the screw axis from the ideal axis, and compared the two groups. The angular deviation was significantly lower in the patient-specific guide group. We concluded that a 3-D-printed guide for scaphoid percutaneous fixation allows a more accurate placement of the screw than a fluoroscopy guide in our cadaveric model.

Unusual indication of Cell therapy for hip osteonecrosis after pregnancy.

PURPOSE: Osteonecrosis is a rare event during or after pregnancy. Due to the low number of cases, there is no report of long-term results after conservative surgery in this population. METHOD: From 1992 to 2010, 145 consecutive female patients with unilateral symptomatic (94 stage I and 51 stage II) left hip osteonecrosis (ON) related to pregnancy were treated between 4 and 16 months after delivery with percutaneous mesenchymal stem cell (MSC) injection obtained from bone marrow concentration. The average total number of MSCs (counted as number of colonies forming units-fibroblast) injected in the hip was 185 000 ± 65 000 cells (range 95 000-240 000 cells). RESULTS: At the most recent follow-up (average 15 years after hip surgery, range 8-25 years), among the 145 hips included in the study, 4 hips (2.7%) had collapsed and were treated with total hip arthroplasty (THA). Thirty-two of the 94 stage I had progressed to stage II; and 4 of the 51 stage II had progressed to stage III and collapse. The other 141 hips (97.3%) were without collapse and pain free. On MRI, as percentage of the volume of the femoral head, the osteonecrosis had decreased from 34.5% pre-operatively to 6% at the most recent follow-up. For women who had other children after treatment, a subsequent pregnancy was not associated with osteonecrosis. CONCLUSION: Patients with hip osteonecrosis following pregnancy had a low conversion rate to THA when treated early with cell therapy.

Success rate and risk factors of failure of the induced membrane technique in children: a systematic review.

The induced membrane technique was designed by Masquelet et al. to address segmental bone defects of critical size in adults. It has been used after bone defects of traumatic, infectious and tumoral origin with satisfactory results. Recently, it has been used in children but, after an initial enthusiasm, several cases of failure have been reported. The purpose of this study was to assess the success rate and the risk factors of failure of the induced membrane for children. We conducted a systematic review of all the studies reporting the results of the induced membrane technique to address bone defects of critical size in children. Our primary outcome was the success rate of the technique defined as a bone union before any iterative surgery. Our secondary outcomes were the complications and the risk factors of failure. We searched Medline via Pubmed, EMBASE and the Cochrane Library. Twelve studies, including 69 patients, met the inclusion criteria. There were 41 boys and 28 girls. Mean age at surgery was 10 years. Mean size of resection was 12.38 cm and the mean time between the two stages was 5.86 months. Mean rate of bone union after the two stages of the induced membrane technique was 58% (40/69) but this rate increased to 87% after revision surgeries (60/69). Main complications were non-unions (19/69), lysis of the graft (6/69) and fractures of the bone graft (6/69). Only 1/69 deep infection was reported. Other non specific complications were regularly reported such limb length discrepancies, joint stiffness and protruding wires. Risk factor of failure that could be suspected comprised the resection of a malignant tumour, a bone defect located at the femur, a wide resection, a long time between the two stages, an unstable osteosynthesis and a bone graft associating autograft to other graft materials. The induced membrane technique is suitable for bone defects of critical size in children. It is a reliable technique with no need of micro vascular surgery. However, we found several risk factors of failure for the use of the induced membrane technique to address segmental bone defect of critical size in children.