Colorimetric aptasensor for detection of Bacillus cytotoxicus spores in milk and ready-to-use food.

The high incidence of foodborne diseases caused by pathogenic bacteria raises concerns worldwide and imposes considerable public healthcare challenges. This is especially observed with dormant spores of Bacilli, which can often survive treatments used by the food industry to kill growing bacteria. The early and rapid detection of bacterial spores is essential to ensure food safety. Commercial availability of such a test will present a high potential for food sector. We present a point-of-need colorimetric assay for detection of Bacillus cytotoxicus spores in food. The detection principle is based on spore-enhanced peroxidase-like catalytic activity of gold nanoparticles. The sensing platform consists of a microtube containing gold nanoparticles (AuNPs), and magnetic particles (MPs), both conjugated with specific aptamer BAS6R that recognize B. cytotoxicus spores. Upon the addition of the sample, spores were determined as present by the enhanced color change of the solution, due to the oxidation of tetramethylbenidine (TMB) with H2O2. The assay was evaluated by the naked eye (on/off) and quantitatively with use of a spectrophotometer. BAS6R@AuNPs aptasensor coupled to BAS6R@MPs proved to be highly sensitive, achieving the naked-eye limit of detection as low as 102 cfu/mL in water and milk, and 104 cfu/mL in mashed potatoes. Moreover, discrimination between spores of B. cytotoxicus and B. subtilis as well as bacterial vegetative cells was achieved in contaminated food samples, providing a good selectivity. This work provides a promising proof of concept for the development of instrument-free, low-cost and rapid assay for Bacillus cytotoxicus spore detection, which is able to compete in sensitivity with conventional costly and time-consuming laboratory analyses.

Recent Advances in Electrochemical Biosensors for Food Control.

The rapid and sensitive detection of food contaminants is becoming increasingly important for timely prevention and treatment of foodborne disease. In this review, we discuss recent developments of electrochemical biosensors as facile, rapid, sensitive, and user-friendly analytical devices and their applications in food safety analysis, owing to the analytical characteristics of electrochemical detection and to advances in the design and production of bioreceptors (antibodies, DNA, aptamers, peptides, molecular imprinted polymers, enzymes, bacteriophages, etc.). They can offer a low limit of detection required for food contaminants such as allergens, pesticides, antibiotic traces, toxins, bacteria, etc. We provide an overview of a broad range of electrochemical biosensing designs and consider future opportunities for this technology in food control.

Low-cost goldleaf electrode as a platform for Escherichia coli immunodetection.

Gold electrodes are one of most prevalent substrates in electrochemical biosensors because they can be easily and highly efficiently functionalized with thiolated biomolecules. However, conventional methods to fabricate gold electrodes are costly, time-consuming and require onerous equipment. Here, an affordable method for rapid fabrication of an electrochemical immunosensor for Escherichia coli detection is presented. The gold electrode was generated using 24-karat gold leaves and lowcost polyvinyl chloride adhesive sheets covered with an insulating PTFE layer. The goldleaf electrode (GLE) was patterned using laser ablation and characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electronic microscopy, contact angle and 3D profiling. The GLEs were modified by a self-assembled mercaptopropionic monolayer, followed by surface activation to allow binding of the specific anti-E. coli antibody via carbodiimide linking. The biosensor showed a detection limit of 2 CFU/mL and a linear dynamic range of 10-107 CFU/mL for E. coli cells. No false positive signals were obtained from control bacteria. The obtained results demonstrated suitability of GLE for use in biosensors with high reliability and reproducibility. It is foreseeable that our work will inspire design of point-of-need biosensors broadly applicable in low-resource settings.

Naked-eye detection of Staphylococcus aureus in powdered milk and infant formula using gold nanoparticles.

Nonspecific binding of proteins from complex food matrices is a significant challenge associated with a biosensor using gold nanoparticles (AuNPs). To overcome this, we developed an efficient EDTA chelating treatment to denature milk proteins and prevent their adsorption on AuNPs. The use of EDTA to solubilize proteins enabled a sensitive label-free apta-sensor platform for colorimetric detection of Staphylococcus aureus in milk and infant formula. In the assay, S. aureus depleted aptamers from the test solution, and the reduction of aptamers enabled aggregation of AuNPs upon salt addition, a process characterized by a color change from red to purple. Under optimized conditions, S. aureus could be visually detected within 30 min with the detection limit of 7.5 × 104 CFU/mL and 8.4 × 104 CFU/mL in milk and infant formula, respectively. The EDTA treatment provides new opportunities for monitoring milk contamination and may prove valuable for biosensor point-of-need applications.

Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application.

An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol-gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPH assay, and confirmed further in a preservation test on fresh fruit.

Advances in Nanomaterials-Based Electrochemical Biosensors for Foodborne Pathogen Detection.

Electrochemical biosensors utilizing nanomaterials have received widespread attention in pathogen detection and monitoring. Here, the potential of different nanomaterials and electrochemical technologies is reviewed for the development of novel diagnostic devices for the detection of foodborne pathogens and their biomarkers. The overview covers basic electrochemical methods and means for electrode functionalization, utilization of nanomaterials that include quantum dots, gold, silver and magnetic nanoparticles, carbon nanomaterials (carbon and graphene quantum dots, carbon nanotubes, graphene and reduced graphene oxide, graphene nanoplatelets, laser-induced graphene), metal oxides (nanoparticles, 2D and 3D nanostructures) and other 2D nanomaterials. Moreover, the current and future landscape of synergic effects of nanocomposites combining different nanomaterials is provided to illustrate how the limitations of traditional technologies can be overcome to design rapid, ultrasensitive, specific and affordable biosensors.

Bacillus cereus Induces Severe Infections in Preterm Neonates: Implication at the Hospital and Human Milk Bank Level.

Human breast milk (HBM) is a source of essential nutrients for infants and is particularly recommended for preterm neonates when their own mother's milk is not available. It provides protection against infections and decreases necrotizing enterocolitis and cardiovascular diseases. Nevertheless, HBM spoilage can occur due to contamination by pathogens, and the risk of a shortage of HBM is very often present. B. cereus is the most frequent ubiquitous bacteria responsible for HBM being discarded. It can contaminate HBM at all stages, from its collect point to the storage and delivery. B. cereus can induce severe infection in newborns with very low birth weight, with sometimes fatal outcomes. Although the source of contamination is rarely identified, in some cases, HBM was suspected as a potential source. Even if the risk is low, as infection due to B. cereus in preterm infants should not be overlooked, human milk banks follow strict procedures to avoid contamination, to accurately identify remaining bacteria following pasteurization and to discard non-compliant milk samples. In this review, we present a literature overview of B. cereus infections reported in neonates and the suspected sources of contamination. We highlight the procedures followed by the human milk banks from the collection of the milk to its microbiological characterization in Europe. We also present improved detection and decontamination methods that might help to decrease the risk and to preserve the public's confidence in this vital biological product for infants whose mothers cannot breastfeed.