Characterization of O/W emulgels based on whey protein-alginate-inulin coacervates: Influence of temperature and ultrasound as protein preconditioning process.

Preconditioning processes in proteins play a crucial role in enhancing their functional properties as surface active agents. Whey protein isolate (WPI, 20 wt%) was preconditioned via temperature (WPIT, 90 °C) or ultrasound (WPIUS, 20 kHz, 80 % amplitude). FTIR and zeta potential analysis demonstrated the effect of the preconditioning process on the secondary structure and surface properties of WPI. WPI-Alginate:Inulin (AI) complex coacervates (CCWPI:AI) were formed at pH 3.0 using WPIT and WPIUS, and the associative electrostatic interactions between WPI-AI led to coacervation yields >90 %, influenced by the preconditioning process employed. Viscoelastic properties outlined a predominantly solid-like behavior (G´ > G"). The CCWPI:AI system based on WPIT showed enhanced strength and gel-like structure compared to the WPIUS-based system. Oil-in-water (O/W) emulgels were formed and stabilized with the CCWPI:AI complexes, exhibiting spherical droplets (93.3-292.8 µm), whereas texture and rheological properties highlighted the formation of gel-like systems. The centrifugation STEP technology was used to evaluate the physical stability of emulgels, WPIT-based emulgels displayed superior stability against creaming than untreated WPI and WPIUS-based emulgels. These findings provide a basis for developing emulgels with prolonged stability and tunable functional properties, tailoring enhanced viscoelastic and texture attributes to meet specific needs for industrial applications where gel-like properties are pursued.

Phenolic Compounds from Wild Plant and In Vitro Cultures of Ageratina pichichensis and Evaluation of Their Antioxidant Activity.

Ageratina pichichensis, is commonly used in traditional Mexican medicine. In vitro cultures were established from wild plant (WP) seeds, obtaining in vitro plant (IP), callus culture (CC), and cell suspension culture (CSC) with the objective to determine total phenol content (TPC) and flavonoids (TFC), as well as their antioxidant activity by DPPH, ABTS and TBARS assays, added to the compound's identification and quantification by HPLC, from methanol extracts obtained by sonication. CC showed significantly higher TPC and TFC than WP and IP, while CSC produced 2.0-2.7 times more TFC than WP, and IP produced only 14.16% TPC and 38.8% TFC compared with WP. There were identified compounds such as epicatechin (EPI), caffeic acid (CfA), and p-coumaric acid (pCA) in in vitro cultures that were not found in WP. The quantitative analysis shows gallic acid (GA) as the least abundant compound in samples, whereas CSC produced significantly more EPI and CfA than CC. Despite these results, in vitro cultures show lower antioxidant activity than WP, for DPPH and TBARS WP > CSC > CC > IP and ABTS WP > CSC = CC > IP. Overall, A. pichichensis WP and in vitro cultures produce phenolic compounds with antioxidant activity, especially CC and CSC, which are shown to be a biotechnological alternative for obtaining bioactive compounds.

Obtaining 2,3-Dihydrobenzofuran and 3-Epilupeol from Ageratina pichinchensis (Kunth) R.King & Ho.Rob. Cell Cultures Grown in Shake Flasks under Photoperiod and Darkness, and Its Scale-Up to an Airlift Bioreactor for Enhanced Production.

Ageratina pichinchensis (Kunth) R.King & Ho.Rob. is a plant used in traditional Mexican medicine, and some biotechnological studies have shown that its calluses and cell suspension cultures can produce important anti-inflammatory compounds. In this study, we established a cell culture of A. pichinchensis in a 2 L airlift bioreactor and evaluated the production of the anti-inflammatory compounds 2,3-dihydrobenzofuran (1) and 3-epilupeol (2). The maximum biomass production (11.90 ± 2.48 g/L) was reached at 11 days of culture and cell viability was between 80% and 90%. Among kinetic parameters, the specific growth rate (µ) was 0.2216 days-1 and doubling time (td) was 3.13 days. Gas chromatography coupled with mass spectrometry (GC-MS) analysis of extracts showed the maximum production of compound 1 (903.02 ± 41.06 µg/g extract) and compound 2 (561.63 ± 10.63 µg/g extract) at 7 and 14 days, respectively. This study stands out for the significant production of 2,3-dihydrobenzofuran and 3-epilupeol and by the significant reduction in production time compared to callus and cell suspension cultures, previously reported. To date, these compounds have not been found in the wild plant, i.e., its production has only been reported in cell cultures of A. pichinchensis. Therefore, plant cell cultured in an airlift reactor can be an alternative for the improved production of these anti-inflammatory compounds.

Chemical characterization of yellow-orange and purple varieties of Opuntia ficus-indica fruits and thermal stability of their betalains.

Betalains are plant pigments with biological properties and can be used instead of synthetic colorants to confer color and functional properties to foods. The objective of this work was to carry out the chemical characterization of two varieties of prickly pear of Opuntia ficus-indica, one of yellow-orange coloration (Mandarina) and the other of purple coloration (Vigor), through measurements of chemical parameters and color in pulp, antioxidant activity, total phenolic compounds, and betalain content. Considering the thermolability of betalains and their potential applications in food, the thermal stability and activation energy of betacyanins from Vigor variety and betaxanthins from the Mandarina variety were also evaluated and compared with those from beetroot, the main source of betalains. Results for chemical characterization agreed with previous prickly pear reports of other regions, while the thermal degradation kinetics of betalains showed a first-order degradation pattern with respect to time and temperature treatment. Betacyanins from Vigor prickly pear showed similar thermal stability to those from beetroot, which was reflected in similar values of activation energy, while betaxanthins from Mandarina prickly pear showed a higher stability, and therefore a higher activation energy, than those from beetroot. Based on the results, the prickly pear varieties used in this study can be considered as a good source of betalains with potential applications in food and, in addition, the methodology for the evaluation of thermostability can be used to compare the stability of betalains from different sources in a temperature range of 50-90°C. PRACTICAL APPLICATION: The varieties of prickly pear used in this study can be considered a good source of red-purple and yellow-orange easily extractable pigments. In addition, we report a methodology that can be used for the evaluation of the thermal stability of these pigments and to compare this stability between different plant sources. Gaining knowledge on betalain thermal stability will make it possible to propose specific applications, for example, in processed foods requiring different pigment stabilities.

Liquid-liquid and liquid-solid separation in self-assembled chitosan-alginate and chitosan-pectin complexes.

The complexation between two oppositely charged polyelectrolytes (PE) can lead liquid-liquid (complex coacervates, CC) or liquid-solid (solid precipitates, SP) phase separations. Herein, the effect of pH (2-11) and ionic strength (I, 0.05-1.0 M KCl) on the associative interactions between chitosan (QL)-alginate (SA) and QL-Pectin (Pec), polysaccharides widely used in biotechnology field, is described. pH and I, exhibited significant effect on the structure and phase transitions by modifying the ionization degree (α), pka, and associative interactions between PE. Onset of binding was established at pHc 9, while continued acidification (pHτ 5.8) led to simultaneous CC and SP exhibiting a maximum turbidity in both systems. At pHδ 4.0, QL-Pec showed preferably CC structures whereas QL-SA maintained the CC and SP structures. At pHω 2, the associative interactions were suppressed due to the low ionization of Pec and SA. I (1.0 M) significantly diminished the interactions in QL-Pec due to charge screening. Molecular weight, second virial coefficient, hydrodynamic size, ionizable groups, and persistence length of polyion, influenced on the phase behavior of QL-Pec and QL-SA systems. Therefore, CC and SP are found simultaneously in both systems, their transitions can be modulated by intrinsic and environmental conditions, expanding the functional properties of complexed polysaccharides.

Characterization of Cooked Meat Models using Grasshopper (Sphenarium purpurascens) Soluble Protein Extracted by Alkalisation and Ultrasound as Meat-Extender.

The most abundant Orthoptera in Mexico is a small grasshopper (Sphenarium purpurascens) which is considered a food source with increased nutritional value due to its high protein content. Insect proteins have gained relevance because of their high potential as gelling, texturing, and extender agents in the food industry. The objective of this study was to evaluate the effect of substituting meat with a soluble protein extract from grasshopper obtained by alkalisation or alkalisation-piezoelectric ultrasound, on the techno-functional, physicochemical, and sensory characteristics of cooked meat models (sausages). The soluble protein was extracted in NaHCO3 pH 8 and a piezoelectric ultrasound 5-mm sonotrode at 20 kHz with 99% amplitude. Different formulations with meat substitution: 0%, 5%, 10%, and 15% were prepared and characterised for their rheological behaviour, emulsion stability, weight loss by cooking, total protein content, colour, and texture. Sensory evaluation was conducted with consumers using a test involving check-all-that-apply and overall liking. The alkalisation-piezoelectric ultrasound method improved the solubility and the techno-functional properties of the soluble grasshopper protein when applied in sausages at maximum levels of 10% meat substitution. The sensory evaluation indicated that the formulation with 5% meat substitution exhibited the same acceptability as the control sample. Given these results, the soluble protein treated with alkalisation and piezoelectric ultrasound could be used as an extender in meat products.

Extraction of Lipophilic Antioxidants from Native Tomato Using Green Technologies.

Research background: Tomato (Solanum lycopersicum L.) fruit is highly consumed worldwide and contains high amounts of carotenoids and tocopherols, two powerful antioxidants. Native tomato genotypes are rarely used in large-scale market but serve as a reservoir to diversify the species gene pool and can be employed to obtain functional compounds. Extraction methods are currently changing towards cleaner procedures that are more efficient and environmentally friendly, including avoiding toxic or polluting solvents. Experimental approach: In this study, factorial and fractional factorial designs were used to evaluate the efficiency of digestive enzymes, sonication and green solvents to obtain lipophilic antioxidant extracts from native tomato. To monitor the efficiency of the extraction process, spectrophotometric quantification of total carotenoids and antioxidant activity was carried out, and then individual quantification of carotenoids and tocopherols in the extracts was done by HPLC. Results and conclusions: Digestive enzymes and sonication increased the carotenoid content and the antioxidant activity of the obtained extracts when applied individually. However, when these treatments were applied together and in combination with isopropyl acetate, a green solvent, the obtained extracts had the highest carotenoid and tocopherol contents as well as the maximal antioxidant activity. A correlation analysis suggested that antioxidant activity resulted from synergistic effects rather than individual compounds. Tomato extracts were obtained through a rapid and environmentally friendly extraction method and their antioxidant activity was enhanced. Novelty and scientific contribution: Tomato fruits have been the subject of numerous studies; however, functional compound extraction through environmentally friendly methods remains an attractive use of native tomato fruit, enhancing its limited production and harnessing a large amount of tomato product industry. There are few reports where environmentally friendly extraction methods are combined; even rarer are those where green solvents are also used. In this work, the combination of different environmentally friendly extraction methods improved the extraction of carotenoids and tocopherols and allowed to establish a more efficient process. These results could stimulate the use of clean technologies and make the native tomato more attractive for industrial or compound extraction processes.

Engineering Considerations to Produce Bioactive Compounds from Plant Cell Suspension Culture in Bioreactors.

The large-scale production of plant-derived secondary metabolites (PDSM) in bioreactors to meet the increasing demand for bioactive compounds for the treatment and prevention of degenerative diseases is nowadays considered an engineering challenge due to the large number of operational factors that need to be considered during their design and scale-up. The plant cell suspension culture (CSC) has presented numerous benefits over other technologies, such as the conventional whole-plant extraction, not only for avoiding the overexploitation of plant species, but also for achieving better yields and having excellent scaling-up attributes. The selection of the bioreactor configuration depends on intrinsic cell culture properties and engineering considerations related to the effect of operating conditions on thermodynamics, kinetics, and transport phenomena, which together are essential for accomplishing the large-scale production of PDSM. To this end, this review, firstly, provides a comprehensive appraisement of PDSM, essentially those with demonstrated importance and utilization in pharmaceutical industries. Then, special attention is given to PDSM obtained out of CSC. Finally, engineering aspects related to the bioreactor configuration for CSC stating the effect of the operating conditions on kinetics and transport phenomena and, hence, on the cell viability and production of PDSM are presented accordingly. The engineering analysis of the reviewed bioreactor configurations for CSC will pave the way for future research focused on their scaling up, to produce high value-added PDSM.

Arnica montana Cell Culture Establishment, and Assessment of Its Cytotoxic, Antibacterial, α-Amylase Inhibitor, and Antioxidant In Vitro Bioactivities.

Arnica montana cell suspension culture could be a sustainable source of a vegetal material producer of secondary metabolites (SMs) possessing biological effects. Different plant growth regulator concentrations (0-5 mg/L) were tested in foliar explants to induce a callus that was used to establish a cell suspension culture. Growth kinetics was carried out for 30 days. A methanolic extract obtained from biomass harvested at 30 days of growth kinetics was fractionated, and three fractions were tested for bioactivities. We induced a callus with 1 mg/L of picloram and 0.5 mg/L of kinetin in foliar explants, which allowed for the establishment of a cell suspension culture, and the latter had the highest total SMs contents at day 30. Three fractions showed differences in total SMs contents, with the highest values per gram as follows: 270 mg gallic acid equivalent for total phenolic content, 200 mg quercetin equivalent for total flavonoid content, 83 mg verbascoside equivalent for total phenolic acid content, and 396 mg parthenolide equivalent for total sesquiterpene lactone content. The best bioactivities were 2-6 µg/mL for the 50% inhibition of 2,2-diphenyl-1-picrylhydrazyl radical, 30% cellular viability of lymphoma cells at 40 µg/mL, 17% inhibition against Escherichia coli and Staphylococcus aureus at 8 µg/disk, and α-amylase inhibition at 12% with 10 µg/mL. The total SMs contents were correlated with bioactivities.

Phytochemical, Pharmacological, and Biotechnological Study of Ageratina pichinchensis: A Native Species of Mexico.

Ageratina pichinchensis (Asteraceae) has been used for a long time in traditional Mexican medicine for treating different skin conditions and injuries. This review aimed to provide an up-to-date view regarding the traditional uses, chemical composition, and pharmacological properties (in vitro, in vivo, and clinical trials) that have been achieved using crude extracts, fractions, or pure compounds. Moreover, for a critical evaluation of the published literature, key databases (Pubmed, Science Direct, and SciFinder, among others) were systematically searched using keywords to retrieve relevant publications on this plant. Studies that reported on crude extracts, fractions, or isolated pure compounds of A. pichinchensis have found a varied range of biological effects, including antibacterial, curative, antiulcer, antifungal, and anti-inflammatory activities. Phytochemical analyses of different parts of A. pichinchensis revealed 47 compounds belonging to chromenes, furans, glycosylated flavonoids, terpenoids, and essential oils. Furthermore, biotechnological studies of A. pichinchensis such as callus and cell suspension cultures have provided information for future research perspectives to improve the production of valuable bioactive compounds.

Environmentally friendly achiote seed extracts with higher δ-tocotrienol content have higher in vitro and in vivo antioxidant activity than the conventional extract.

Achiote (Bixa orellana) is highly appreciated as a condiment and as the main source of bixin and tocotrienols, both having antioxidant properties. To explore the possibility of maximizing the antioxidant activity of achiote seed extracts using clean methodologies, the use of sonication and green solvents were tested. Ethyl lactate, isopropyl acetate, and ethanol combined with probe sonication produced the best results, obtaining similar bixin contents but higher δ-tocotrienol contents, as well as significantly higher in vitro and in vivo antioxidant activity compared with the maceration method extract, requiring low energy and saving time and solvents. The probe-sonicated achiote extract with the highest δ-tocotrienol content was better at increasing the Caenorhabditis elegans resistance to oxidative stress than the extract obtained through maceration. This is the first report about the effect of sonication combined with green solvents on the bixin and δ-tocotrienol content in achiote seed extracts and its relevance on the in vitro and in vivo antioxidant activity.

Achiote (Bixa orellana) Lipophilic Extract, Bixin, and δ-tocotrienol Effects on Lifespan and Stress Resistance in Caenorhabditis elegans.

The onset of many degenerative diseases related to aging has been associated with a decrease in the activity of antistress systems, and pharmacological interventions increasing stress resistance could be effective to prevent the development of such diseases. Achiote is a valuable source of carotenoid and tocotrienols, which have antioxidant activity. In this work, we explore the capacity of an achiote seed extract and its main compounds to modulate the lifespan and antistress responses on Caenorhabditis elegans, as well as the mechanisms involved in these effects. Achiote lipophilic extract, bixin, and δ-tocotrienol were applied on nematodes to carry out lifespan, stress resistance, and fertility assays. The achiote seed extract increased the median and maximum lifespan up to 35% and 27% and increased resistance against oxidative and thermal stresses without adverse effects on fertility. The beneficial effects were mimicked by a bixin+δ-tocotrienol mixture. All the effects on lifespan and stress resistance were independent of caloric restriction but dependent on the insulin/insulin growth factor-1 pathway. This study could provide insights for further research on a new beneficial use of this important crop in health and nutraceutical applications beyond its use as a source of natural pigments.

Whole-cell bioconversion of naringenin to high added value hydroxylated compounds using Yarrowia lipolytica 2.2ab in surface and liquid cultures.

The bioconversion process of bioactive naringenin by whole-cells of Yarrowia lipolytica 2.2ab for the production of increased value-added compounds is successfully achieved in surface and liquid cultures. This approach is an alternative to the commercial production of these bioactive compounds from vegetable sources, which are limited due to their low concentrations and the complexity of the purification processes. The experimentation rendered seven value-added compounds in both surface and liquid bioconversion cultures. Some of the compounds produced have not been previously reported as products from the bioconversion processes, such as the case of ampelopsin. Biosynthetic pathways were suggested for the naringenin bioconversion using whole-cells of Y. lipolytica 2.2ab. Finally, the extracts obtained from the naringenin bioconversion in liquid cultures showed higher percentage of inhibition of DPPH· and ABTS· radicals up to 32.88 and 2.08 times, respectively, compared to commercial naringenin.

Effect of chia mucilage addition on oxidation and release kinetics of lemon essential oil microencapsulated using mesquite gum - Chia mucilage mixtures.

Lemon essential oil (LEO) emulsions were prepared using mesquite gum (MG) - chia mucilage (CM) mixtures (90-10 and 80-20 MG-CM weight ratios) and MG as control sample, LEO emulsions were thenspray dried for obtaining the respective microcapsules.LEO emulsions were analyzed by mean droplet size and apparent viscosity, while microcapsules were characterized through mean particle size, morphology, volatile oil retention (≤51.5%), encapsulation efficiency (≥96.9%), as well asoxidation and release kinetics of LEO. TheLEO oxidation kinetics showed that 90-10 and 80-20MG-CM microcapsules displayed maximum peroxide values of 91.6 and 90.5 meq hydroperoxides kg-1 of oil, respectively, without significant differences between them (p > .05).MG-CM microcapsules provided better protection to LEO against oxidation than those formed with MG; where the oxidation kinetics were well adjusted to zero-order (r2 ≥ 0.94).The LEO release kinetics from microcapsules were carried out at differentpH (2.5 and 6.5) and temperature (37 °C and 65 °C) and four mathematical models (zero-order, first-order, Higuchi and Peppas) were used to evaluate the experimental data; the release kinetics indicated that the 80-20 MG-CM microcapsules had a longer delay in LEO release rate, followed by 90-10 MG-CM and MG microcapsules, hence, CM addition in MG-CM microcapsules contributed to delay the LEO release rate. This work clearly demonstrates that use of a relatively small amount of CM mixed with MGimproves oxidative stability and delays the release rate of encapsulated LEO regarding MG microcapsules, therefore, MG-CM mixtures are interesting additives systems suitable for being applied in food industry.

Cross-Linking Chitosan into Hydroxypropylmethylcellulose for the Preparation of Neem Oil Coating for Postharvest Storage of Pitaya (Stenocereus pruinosus).

The market trend for pitaya is increasing, although the preservation of the quality of this fruit after the harvest is challenging due to microbial decay, dehydration, and oxidation. In this work, the application of antimicrobial chitosan-based coatings achieved successful postharvest preservation of pitaya (Stenocereus pruinosus) during storage at 10 ± 2 °C with a relative humidity of 80 ± 5%. The solution of cross-linked chitosan with hydroxypropylmethylcellulose with entrapped Neem oil (16 g·L-1) displayed the best postharvest fruit characteristics. The reduction of physiological weight loss and fungal contamination, with an increased redness index and release of azadirachtin from the microencapsulated oil, resulted in up to a 15 day shelf life for this fruit. This postharvest procedure has the potential to increase commercial exploitation of fresh pitaya, owing to its good taste and high content of antioxidants.

Effect of bio-chemical chitosan and gallic acid into rheology and physicochemical properties of ternary edible films.

The ternary edible films based on commercial or bio-chemical chitosan (CCh or BCh) and starch (S) with different concentration of gallic acid (GA) were produced by casting. This work analyzed the effect of different type of Ch and GA concentrations (1.25 mg/gTB and 2.5 mg/gTB) on the rheological properties of the film-forming solutions, as well as physicochemical (thickness, moisture content, swelling index, water vapor permeability (WVP), tensile strength, microstructure, opacity, and color) and antioxidant properties of the edible films themselves. The chemical cross-linking between the GA and Ch into the edible films of biopolymers could form of ester linkages between the carboxyl groups of GA and the hydroxyl groups of Ch. Results showed that the ternary edible films of BCh-S-GA5.0 resulted with a positive effect on their rheological (η0, λ, and p), physicochemical (WVP, swelling, tensile strength, microstructure) and antioxidant properties. The greatest incorporation of polyphenol into the BCh-S-GA5.0 films greatly reduced WVP and swelling values in approximately 61.01% and 23%, respectively also the tensile strength value increased to 37.372 MPa. The ternary edible films developed in this study showed many desirable characteristics, which could potentially be used as bioactive packaging films for food applications.

Polyelectrolyte complex of Aloe vera, chitosan, and alginate produced fibroblast and lymphocyte viabilities and migration.

Chitosan, sodium alginate and gel of Aloe vera (Aloe barbadensis Miller) were employed for the preparation of polyelectrolyte complexes at pH 4 and 6. FT-IR spectroscopy analysis showed evidence on complexes formation and incorporation of the Aloe vera gel. The ζ potential determination of the polyelectrolyte complexes revealed the presence of surface charges in the range of -20 to -24 mV, which results in stable systems. The dynamic moduli exhibited a high dependence on angular frequency, which is commonly found in solutions of macromolecules. The materials showed human fibroblast and lymphocyte viabilities up to 90% in agreement with null cytotoxicity. The polyelectrolyte complexes at pH 6 with Ca2+ were stable, showed high water absorption, satisfactory morphology, pore size and rigidity, characteristics that allowed significant human fibroblast migration in wound closure in vitro assays.

High intensity ultrasound treatment of faba bean (Vicia faba L.) protein: Effect on surface properties, foaming ability and structural changes.

Response surface methodology was used for establishing the amplitude (72.67%) and time (17.29 min) high-intensity ultrasound (HIUS) conditions leading to an optimized faba bean protein isolate (OFPI) with lower interfacial tension, zeta potential and viscosity, and higher solubility than native faba bean protein isolate (NFPI). OFPI showed significantly higher adsorption dynamics at the air-water interface, and produced foam with significant smaller bubble diameter, higher overrun, stability and yield stress, and lower liquid drainage than NFPI. Fourier Transform Spectroscopy (FT-IR) revealed that the secondary structure of OFPI deferred from NFPI in terms of increases in ß conformations (6.61% ß-sheet, 19.6% ß-turn, 0.8% anti-parallel ß-sheet) and decreases in inter-molecular aggregates (43.54%). Multienzyme study pinpointed that the structural changes could have induced a decrease on the relative protein digestibility of OFPI respect that of NFPI. The results of this work demonstrate that HIUS technology improves the surface and foaming properties of faba bean protein isolate, which may favour the revalorisation of this crop.

Rheological properties of tamarind (Tamarindus indica L.) seed mucilage obtained by spray-drying as a novel source of hydrocolloid.

Tamarind seed mucilage (TSM) was extracted and obtained by spray drying. The power law model well described the rheological behavior of the TSM dispersions with determination coefficients R2 higher than 0.93. According to power law model, non-Newtonian shear thinning behavior was observed at all concentrations (0.5%, 1%, 1.5% and 2%) and temperatures (25, 30, 40, and 60°C) studied. Increasing temperature decreased the viscosity and increased the flow behavior index, opposite effect was observed when increasing the concentration. The temperature effect was more pronounced at 2.0% TSM concentration with an activation energy of 20.25kJ/mol. A clear dependence of viscosity on pH was observed, as pH increased from acidic to alkaline conditions, the viscosity increased. It was found that the rheological properties of TSM were affected by the sucrose and salts and their concentrations as well due to the addition of ions (or sucrose) decreases repulsion and allows molecule expansion promoting a significant reduction in viscosity. These results suggest that TMS could be applied in the production of foods that require additives with thickening capacity.

Exploring the Potential of Mesquite Gum-Nopal Mucilage Mixtures: Physicochemical and Functional Properties.

In this work the physicochemical and functional properties of mesquite gum (MG) and nopal mucilage (NM) mixtures (75-25, 50-50, 25-75) were evaluated and compared with those of the individual biopolymers. MG-NM mixtures exhibited more negative zeta potential (ZP) values than those displayed by MG and NM, with 75-25 MG-NM showing the most negative value (-14.92 mV at pH = 7.0), indicative that this biopolymer mixture had the highest electrostatic stability in aqueous dispersions. Viscosity curves and strain amplitude sweep of aqueous dispersions (30% w/w) of the individual gums and their mixtures revealed that all exhibited shear thinning behavior, with NM having higher viscosity than MG, and all displaying fluid-like viscoelastic behavior where the loss modulus predominated over the storage modulus (G″>G'). Differential Scanning Calorimetry revealed that MG, NM, and MG-NM mixtures were thermally stable with decomposition peaks in a range from 303.1 to 319.6 °C. From the functional properties viewpoint, MG (98.4 ± 0.7%) had better emulsifying capacity than NM (51.9 ± 2.0%), while NM (43.0 ± 1.4%) had better foaming capacity than MG. MG-NM mixtures acquired additional functional properties (emulsifying and foaming) regarding the individual biopolymers. Therefore, MG-NM mixtures represent interesting alternatives for their application as emulsifying and foaming agents in food formulations. PRACTICAL APPLICATION: Mesquite gum (MG) and nopal mucilage (NM) are promising raw materials with excellent functional properties whose use has been largely neglected by the food industry. This work demonstrates MG-NM mixtures acquired additional functional properties regarding the individual biopolymers, making these mixtures multifunctional ingredients for the food industry.