RESUMEN
BACKGROUND: For many applications in research, material development and testing, physical skin models are preferable to the use of human skin, because more reliable and reproducible results can be obtained. PURPOSE: This article gives an overview of materials applied to model physical properties of human skin to encourage multidisciplinary approaches for more realistic testing and improved understanding of skin-material interactions. METHODS: The literature databases Web of Science, PubMed and Google Scholar were searched using the terms 'skin model', 'skin phantom', 'skin equivalent', 'synthetic skin', 'skin substitute', 'artificial skin', 'skin replica', and 'skin model substrate.' Articles addressing material developments or measurements that include the replication of skin properties or behaviour were analysed. RESULTS: It was found that the most common materials used to simulate skin are liquid suspensions, gelatinous substances, elastomers, epoxy resins, metals and textiles. Nano- and micro-fillers can be incorporated in the skin models to tune their physical properties. CONCLUSION: While numerous physical skin models have been reported, most developments are research field-specific and based on trial-and-error methods. As the complexity of advanced measurement techniques increases, new interdisciplinary approaches are needed in future to achieve refined models which realistically simulate multiple properties of human skin.
Asunto(s)
Vendajes , Materiales Biomiméticos/química , Fenómenos Fisiológicos de la Piel , Piel Artificial , Piel/citología , Cicatrización de Heridas/fisiología , Animales , Ingeniería de Tejidos/métodosRESUMEN
The mechanical contact between medical textiles and skin is relevant in the health care for patients with vulnerable skin or chronic wounds. In order to gain new insights into the skin-textile contact on the microscopic level, the 3D surface topography of a normal and a new hospital bed sheet with a regular surface structure was measured using a digital microscope. The topographic data was analysed concerning material distribution and real contact area against smooth surfaces as a function of surface deformations. For contact conditions that are relevant for the skin of patients lying in a hospital bed it was found that the order of magnitude of the ratio of real and apparent contact area between textiles and skin or a mechanical skin model lies between 0.02 and 0.1 and that surface deformations, i.e. penetration of the textile surface asperities into skin or a mechanical skin model, range from 10 to 50µm. The performed analyses of textile 3D surface topographies and comparisons with previous friction measurement results provided information on the relationship between microscopic surface properties and macroscopic friction behaviour of medical textiles. In particular, the new bed sheet was found to be characterised by a trend towards a smaller microscopic contact area (up to a factor of two) and by a larger free interfacial volume (more than a factor of two) in addition to a 1.5 times lower shear strength when in contact with counter-surfaces. The applied methods can be useful to develop improved and skin-adapted materials and surfaces for medical applications.
Asunto(s)
Fricción , Piel , Textiles , Fuerza Compresiva , Humanos , Propiedades de Superficie , Percepción del TactoRESUMEN
The structure of BaMg(1/3)Ta(2/3)O(3) (BMT) has been studied using x-ray scattering. The phonons have been measured and the results are similar to those of other materials with a perovskite structure such as PbMg(1/3)Nb(2/3)O(3) (PMN). The acoustic and lowest energy optic branches were measured but it was not possible to measure the branches of higher energy, possibly this is because they largely consist of oxygen motions. High-resolution inelastic measurements also showed that the diffuse scattering was strictly elastic and not directly related to the phonon spectra. Diffuse scattering was observed in BMT near the (H ± 1/2, K ± 1/2, L ± 1/2) points in the Brillouin zone and these had a characteristic cube shape. This arises from ordering of the B-site ions in BMT. Additional experiments revealed the diffuse scattering in BMT similar in shape to Bragg reflections at wavevectors of the form (H ± 1/3, K ± 1/3, L ± 1/3). Such reflections were also observed by Lufaso (2004 Chem. Mater. 16 2148) from powders and suggest that this structure of BMT consists of four differently oriented domains of a trigonal structure and results from a different ordering of the B-site ions from that responsible for the scattering at the (H ± 1/2, K ± 1/2, L ± 1/2) points. The results lead us to suggest that for BMT single crystals the bulk has the properties of a cubic perovskite, whereas the surface may have quite different structure from that of the bulk. This difference resembles the behaviour of cubic relaxors like PMN and PMN doped by PbTiO(3), where significant surface effects have been reported.