A semiconducting supramolecular Co(II)-metallogel based resistive random access memory (RRAM) design with good endurance capabilities.

A highly efficient approach for synthesizing a supramolecular metallogel of Co(II) ions, denoted as CoA-TA, has been established under room temperature and atmospheric pressure conditions. This method employs the metal-coordinating organic ligand benzene-1,3,5-tricarboxylic acid as a low molecular weight gelator (LMWG) in DMF solvent. A comprehensive analysis of the mechanical properties of the resulting supramolecular Co(II)-metallogel was conducted through rheological investigation, considering angular frequency and thixotropic study. The hierarchical rocky network structure of the supramolecular Co(II)-metallogel was unveiled using field emission scanning electron microscopy (FESEM). Transmission electron microscopic (TEM) analysis showed rod-shaped structures via low-magnification high angle annular dark field (HAADF) bright field scanning transmission electron microscopic (STEM) imaging, while energy dispersive X-ray (EDX) elemental mapping confirmed its primary chemical constituents. The formation mechanism of the metallogel was examined via fourier transform infrared spectroscopy (FTIR) spectroscopy. The nature of the synthesized CoA-TA metallogel was affirmed through powder X-ray diffraction (PXRD) analysis. Furthermore, this study involved fabrication of Schottky diode structures in a metal-semiconductor-metal geometry based on cobalt(II) metallogel (CoA-TA), enabling observation of charge transport behavior. Remarkably, a resistive random access memory (RRAM) device utilizing cobalt(II) metallohydrogel (CoA-TA) demonstrated bipolar resistive switching at room temperature and under ambient conditions. The switching mechanism was investigated, revealing the formation and rupture of conductive filaments between metal electrodes that govern the resistive switching behavior. This RRAM device exhibited an impressive ON/OFF ratio (~ 414) and exceptional endurance over 5000 switching cycles. These structures offer great potential for diverse applications such as non-volatile memory design, neuromorphic computing, flexible electronics and optoelectronics. Their advantages lie in their fabrication process, reliable resistive switching behavior and overall performance stability.

Role of Medicinal Plants in the Management of Multiple Sclerosis.

There is a rapid spread of Multiple Sclerosis disorder across the globe, around 2.8 million cases of Multiple Sclerosis in the world. Multiple Sclerosis (MS) is a chronic autoimmune disease of the central nervous system characterized by demyelination, neuroinflammation, and a wide spectrum of clinical manifestations. Many drugs have been tested on MS patients but there is no effective treatment for MS till now. So to inhibit the symptoms caused by MS we performed a study in which we identified various naturally occurring materials with neuroprotective effects on the body that can treat Multiple Sclerosis. The therapeutic strategies portion of the paper reviews the array of disease-modifying therapies currently available for MS management. This paper evaluated their mechanisms of action, efficacy, and safety profiles. It also addressed emerging treatment paradigms by using different naturally occurring materials, including personalized medicine approaches and novel therapies in development. This paper provides a comprehensive overview of the current state of knowledge regarding MS, focusing on its pathogenesis, diagnostic approaches, and therapeutic strategies.

Efficient antimicrobial applications of two novel supramolecular metallogels derived from a l(+)-tartaric acid low molecular weight gelator.

Novel metallogels were synthesized using l(+)-tartaric acid as a gelator, along with cadmium(ii)-acetate and mercury(ii)-acetate in N,N-dimethyl formamide at room temperature. Rheological analyses confirmed the mechanical stability of Cd(ii)- and Hg(ii)-metallogels under varying conditions. Characterization through EDX mapping and FESEM imaging provided insights into their chemical constituents and microstructural features. FT-IR spectroscopy elucidated the metallogel formation mechanism. Antimicrobial assays revealed significant activity against various bacteria, including Gram-positive and Gram-negative strains. This study presents a comprehensive exploration of Cd(ii) and Hg(ii)-based l(+)-tartaric acid-mediated metallogels, highlighting their potential in combating bacterial infections. These findings suggest promising applications in both industrial and biomedical fields, offering avenues for the development of advanced materials.

A Highly Stretchable, Conductive, and Transparent Bioadhesive Hydrogel as a Flexible Sensor for Enhanced Real-Time Human Health Monitoring.

Real-time continuous monitoring of non-cognitive markers is crucial for the early detection and management of chronic conditions. Current diagnostic methods are often invasive and not suitable for at-home monitoring. An elastic, adhesive, and biodegradable hydrogel-based wearable sensor with superior accuracy and durability for monitoring real-time human health is developed. Employing a supramolecular engineering strategy, a pseudo-slide-ring hydrogel is synthesized by combining polyacrylamide (pAAm), ß-cyclodextrin (ß-CD), and poly 2-(acryloyloxy)ethyltrimethylammonium chloride (AETAc) bio ionic liquid (Bio-IL). This novel approach decouples conflicting mechano-chemical effects arising from different molecular building blocks and provides a balance of mechanical toughness (1.1 × 106 Jm-3), flexibility, conductivity (≈0.29 S m-1), and tissue adhesion (≈27 kPa), along with rapid self-healing and remarkable stretchability (≈3000%). Unlike traditional hydrogels, the one-pot synthesis avoids chemical crosslinkers and metallic nanofillers, reducing cytotoxicity. While the pAAm provides mechanical strength, the formation of the pseudo-slide-ring structure ensures high stretchability and flexibility. Combining pAAm with ß-CD and pAETAc enhances biocompatibility and biodegradability, as confirmed by in vitro and in vivo studies. The hydrogel also offers transparency, passive-cooling, ultraviolet (UV)-shielding, and 3D printability, enhancing its practicality for everyday use. The engineered sensor demonstratesimproved efficiency, stability, and sensitivity in motion/haptic sensing, advancing real-time human healthcare monitoring.

Deciphering the Mechanisms and Biotechnological Implications of Nanoparticle Synthesis Through Microbial Consortia.

Nanomaterial synthesis is a growing study area because of its extensive range of uses. Nanoparticles' high surface-to-volume ratio and rapid interaction with various particles make them appealing for diverse applications. Traditional physical and chemical methods for creating metal nanoparticles are becoming outdated because they involve complex manufacturing processes, high energy consumption, and the formation of harmful by-products that pose major dangers to human health and the environment. Therefore, there is an increasing need to find alternative, cost-effective, dependable, biocompatible, and environmentally acceptable ways of producing nanoparticles. The process of synthesizing nanoparticles using microbes has become highly intriguing because of their ability to create nanoparticles of varying sizes, shapes, and compositions, each with unique physicochemical properties. Microbes are commonly used in nanoparticle production because they are easy to work with, can use low-cost materials, such as agricultural waste, are cheap to scale up, and can adsorb and reduce metal ions into nanoparticles through metabolic activities. Biogenic synthesis of nanoparticles provides a clean, nontoxic, ecologically friendly, and sustainable method using renewable ingredients for reducing metals and stabilizing nanoparticles. Nanomaterials produced by bacteria can serve as an effective pollution control method due to their many functional groups that can effectively target contaminants for efficient bioremediation, aiding in environmental cleanup. At the end of the paper, we will discuss the obstacles that hinder the use of biosynthesized nanoparticles and microbial-based nanoparticles. The paper aims to explore the sustainability of microorganisms in the burgeoning field of green nanotechnology.

Designing a Naturally Inspired Conductive Copolymer to Engineer Wearable Bioadhesives for Sensing Applications.

The design of adhesive and conductive soft hydrogels using biopolymers with tunable mechanical properties has received significant interest in the field of wearable sensors for detecting human motions. These hydrogels are primarily fabricated through the modification of biopolymers to introduce cross-linking sites, the conjugation of adhesive components, and the incorporation of conductive materials into the hydrogel network. The development of a multifunctional copolymer that integrates adhesive and conductive properties within a single polymer chain with suitable cross-linking sites eliminates the need for biopolymer modification and the addition of extra conductive and adhesive components. In this study, we synthesized a copolymer based on poly([2-(methacryloyloxy)ethyl] trimethylammonium chloride-co-dopamine methacrylamide) (p(METAC-DMA)) using a controlled radical polymerization, allowing for the efficient conjugation of both adhesive and conductive units within a single polymer chain. Subsequently, our multifunctional hydrogel named Gel-MD was fabricated by mixing the p(METAC-DMA) copolymer with non-modified gelatin in which cross-linking took place in an oxidative environment. We confirmed the biocompatibility of the Gel-MD hydrogel through in vitro studies using NIH 3T3 cells as well as in vivo subcutaneous implantation in rats. Furthermore, the Gel-MD hydrogel was effective and sensitive in detecting various human motions, making it a promising wearable sensor for health monitoring and diagnosis.

Sustainable soil management under drought stress through biochar application: Immobilizing arsenic, ameliorating soil quality, and augmenting plant growth.

Rise in climate change-induced drought occurrences have amplified pollution of metal(loid)s, deteriorated soil quality, and deterred growth of crops. Rice straw-derived biochars (RSB) and cow manure-enriched biochars (CEB) were used in the investigation (at doses of 0%, 2.5%, 5%, and 7.5%) to ameliorate the negative impacts of drought, improve soil fertility, minimize arsenic pollution, replace agro-chemical application, and maximize crop yields. Even in soils exposed to severe droughts, 3 months of RSB and CEB amendment (at 7.5% dose) revealed decreased bulk density (13.7% and 8.9%), and increased cation exchange capacity (6.0% and 6.3%), anion exchange capacity (56.3% and 28.0%), porosity (12.3% and 7.9%), water holding capacity (37.5% and 12.5%), soil respiration (17.8% and 21.8%), and nutrient contents (especially N and P). Additionally, RSB and CEB decreased mobile (30.3% and 35.7%), bio-available (54.7% and 45.3%), and leachable (55.0% and 56.5%) fractions of arsenic. Further, pot experiments with Bengal gram and coriander plants showed enhanced growth (62-188% biomass and 90-277% length) and reduced arsenic accumulation (49-54%) in above ground parts of the plants. Therefore, biochar application was found to improve physico-chemical properties of soil, minimize arsenic contamination, and augment crop growth even in drought-stressed soils. The investigation suggests utilisation of cow manure for eco-friendly fabrication of nutrient-rich CEB, which could eventually promote sustainable agriculture and circular economy. With the increasing need for sustainable agricultural practices, the use of biochar could provide a long-term solution to enhance soil quality, mitigate the effects of climate change, and ensure food security for future generations. Future research should focus on optimizing biochar application across various soil types and climatic conditions, as well as assessing its long-term effectiveness.

A hot-Jupiter progenitor on a super-eccentric retrograde orbit.

Giant exoplanets orbiting close to their host stars are unlikely to have formed in their present configurations1. These 'hot Jupiter' planets are instead thought to have migrated inward from beyond the ice line and several viable migration channels have been proposed, including eccentricity excitation through angular-momentum exchange with a third body followed by tidally driven orbital circularization2,3. The discovery of the extremely eccentric (e = 0.93) giant exoplanet HD 80606 b (ref. 4) provided observational evidence that hot Jupiters may have formed through this high-eccentricity tidal-migration pathway5. However, no similar hot-Jupiter progenitors have been found and simulations predict that one factor affecting the efficacy of this mechanism is exoplanet mass, as low-mass planets are more likely to be tidally disrupted during periastron passage6-8. Here we present spectroscopic and photometric observations of TIC 241249530 b, a high-mass, transiting warm Jupiter with an extreme orbital eccentricity of e = 0.94. The orbit of TIC 241249530 b is consistent with a history of eccentricity oscillations and a future tidal circularization trajectory. Our analysis of the mass and eccentricity distributions of the transiting-warm-Jupiter population further reveals a correlation between high mass and high eccentricity.

Eco-Friendly Biomemristive Nonvolatile Memory: Harnessing Organic Waste for Sustainable Technology.

Organic material-based bioelectronic nonvolatile memory devices have recently received a lot of attention due to their environmental compatibility, simple fabrication recipe, preferred scalability, low cost, low power consumption, and numerous additional advantages. Resistive random-access memory (RRAM) devices work on the principle of resistive switching, which has the potential for applications in memory storage and neuromorphic computing. Here, natural organically grown orange peel was used to extract biocompatible pectin to design a resistive switching-based memory device of the structure Ag/Pectin/Indium tin oxide (ITO), and the behavior was studied between a temperature range of 10K and 300K. The microscopic characterization revealed the texture of the surface and thickness of the layers. The memristive current-voltage characteristics performed over 1000 consecutive cycles of repeated switching revealed sustainable bipolar resistive switching behavior with a high ON/OFF ratio. The underlying principle of Resistive Switching behavior is based on the formation of conductive filaments between the electrodes, which is explained in this work. Further, we have also designed a 2 × 2 crossbar array of RRAM devices to demonstrate various logic circuit operations useful for neuromorphic computing. The robust switching characteristics suggest possible uses of such devices for the design of ecofriendly bioelectronic memory applications and in-memory computing.

Development of a novel self-healing Zn(II)-metallohydrogel with wide bandgap semiconducting properties for non-volatile memory device application.

A rapid and effective strategy has been devised for the swift development of a Zn(II)-ion-based supramolecular metallohydrogel, termed Zn@PEH, using pentaethylenehexamine as a low molecular weight gelator. This process occurs in an aqueous medium at room temperature and atmospheric pressure. The mechanical strength of the synthesized Zn@PEH metallohydrogel has been assessed through rheological analysis, considering angular frequency and oscillator stress dependencies. Notably, the Zn@PEH metallohydrogel exhibits exceptional self-healing abilities and can bear substantial loads, which have been characterized through thixotropic analysis. Additionally, this metallohydrogel displays injectable properties. The structural arrangement resembling pebbles within the hierarchical network of the supramolecular Zn@PEH metallohydrogel has been explored using FESEM and TEM measurements. EDX elemental mapping has confirmed the primary chemical constituents of the metallohydrogel. The formation mechanism of the metallohydrogel has been analyzed via FT-IR spectroscopy. Furthermore, zinc(II) metallohydrogel (Zn@PEH)-based Schottky diode structure has been fabricated in a lateral metal-semiconductor-metal configuration and  it's charge transport behavior has also been studied. Notably, the zinc(II) metallohydrogel-based resistive random access memory (RRAM) device (Zn@PEH) demonstrates bipolar resistive switching behavior at room temperature. This RRAM device showcases remarkable switching endurance over 1000 consecutive cycles and a high ON/OFF ratio of approximately 270. Further, 2 × 2 crossbar array of the RRAM devices were designed to demonstrate OR and NOT logic circuit operations, which can be extended for performing higher order computing operations. These structures hold promise for applications in non-volatile memory design, neuromorphic and in-memory computing, flexible electronics, and optoelectronic devices due to their straightforward fabrication process, robust resistive switching behavior, and overall system stability.

Nanocarrier optimization: Encapsulating Hydrastis canadensis in chitosan nanoparticles for enhanced antibacterial and dye degradation performance.

This study focuses on the optimization of Hydrastis canadensis-based nanocarriers in environmental and microbial applications like antibacterial and dye degradation. Hydrastis canadensis (H. canadensis) is loaded into the nanocarrier using a gelation method. Characterization involves pH analysis, UV-VIS spectrophotometry, scanning electron microscopy, Fourier-transform infrared spectroscopy, dynamic light scattering, high-performance liquid chromatography, encapsulation efficiency. Further antimicrobial activity against Staphylococcus aureus and Escherichia coli were tested. Dye degradation was evaluated at concentrations of 1 % of high molecular (HM) and 1.5 % of low molecular (LM) chitosan nanoparticles with both 3C and 1000C concentrations of the drug. The obtained results confirm the presence of chitosan nanocarrier alongside the pure drug in 1 % HM and 1.5 % LM chitosan particles with a notable encapsulation efficiency activity in both 3C and 1000C concentrations. Antimicrobial studies were carried out using the agar well diffusion method and revealed a significant zone of inhibition of 20 mm and 25 mm for E. coli and S. aureus, respectively in chitosan nanocarrier-loaded samples compared to pure drug and chitosan nanocarriers samples. The dye degradation studies of four dyes methylene blue, methylene orange, methylene red, and safranin using both pure drugs and chitosan nanocarrier-loaded drugs showed the highest percentage of degradation (76 %) against methylene blue in the chitosan nanocarrier-drug loaded formulation. These findings cumulatively underscore chitosan nanoparticles can be used as an effective carrier for Hydrastis Canadensis, with enhanced antimicrobial and dye degradation capabilities. Varied concentrations and molecular weights highlight the versatility of the ionotropic gelation method in optimizing drug delivery. Enhanced efficacy of the nanocarrier was evident in the observed zone of inhibition in antimicrobial testing. The substantial degradation percentage in methylene blue emphasizes the formulation's applicability in environmental dye removal processes, with potential avenues for improvement explored through interactions between the chitosan nanocarrier and H. canadensis characteristics. Future investigations may focus on scaling up the optimized formulation for large-scale applications and exploring release kinetics and comprehensive toxicity assessments for a holistic understanding of potential environmental and biomedical implications.

A computational approach for structural and functional analyses of disease-associated mutations in the human CYLD gene.

Tumor suppressor cylindromatosis protein (CYLD) regulates NF-κB and JNK signaling pathways by cleaving K63-linked poly-ubiquitin chain from its substrate molecules and thus preventing the progression of tumorigenesis and metastasis of the cancer cells. Mutations in CYLD can cause aberrant structure and abnormal functionality leading to tumor formation. In this study, we utilized several computational tools such as PANTHER, PROVEAN, PredictSNP, PolyPhen-2, PhD-SNP, PON-P2, and SIFT to find out deleterious nsSNPs. We also highlighted the damaging impact of those deleterious nsSNPs on the structure and function of the CYLD utilizing ConSurf, I-Mutant, SDM, Phyre2, HOPE, Swiss-PdbViewer, and Mutation 3D. We shortlisted 18 high-risk nsSNPs from a total of 446 nsSNPs recorded in the NCBI database. Based on the conservation profile, stability status, and structural impact analysis, we finalized 13 nsSNPs. Molecular docking analysis and molecular dynamic simulation concluded the study with the findings of two significant nsSNPs (R830K, H827R) which have a remarkable impact on binding affinity, RMSD, RMSF, radius of gyration, and hydrogen bond formation during CYLD-ubiquitin interaction. The principal component analysis compared native and two mutants R830K and H827R of CYLD that signify structural and energy profile fluctuations during molecular dynamic (MD) simulation. Finally, the protein-protein interaction network showed CYLD interacts with 20 proteins involved in several biological pathways that mutations can impair. Considering all these in silico analyses, our study recommended conducting large-scale association studies of nsSNPs of CYLD with cancer as well as designing precise medications against diseases associated with these polymorphisms.

Pro-angiogenic Terbium Hydroxide Nanorods Improve Critical Limb Ischemia in Part by Amelioration of Ischemia-Induced Endothelial Injury.

Critical limb ischemia (CLI) refers to a severe condition resulting from gradual obstruction in the supply of blood, oxygen, and nutrients to the limbs. The most promising clinical solution to CLI is therapeutic angiogenesis. This study explored the potency of pro-angiogenic terbium hydroxide nanorods (THNR) for treatment of CLI, with a major focus on their impact on ischemia-induced maladaptive alterations in endothelial cells as well as on vascularization in ischemic limbs. This study demonstrated that, in hypoxia-exposed endothelial cells, THNR improve survival and promote proliferation, migration, restoration of nitric oxide production, and regulation of vascular permeability. Based on molecular studies, these attributes of THNR can be traced to the stimulation of PI3K/AKT/eNOS signaling pathways. Besides, Wnt/GSK-3ß/ß-catenin signaling pathways may also play a role in the therapeutic actions of THNR. Furthermore, in the murine model of CLI, THNR administration can integrally re-establish blood perfusion with concomitant reduction of muscle damage and inflammation. Additionally, improvement of locomotor activities and motor coordination in ischemic limbs in THNR treated mice is also evident. Overall, the study demonstrates that THNR have the potential to be developed as an efficacious and cost-effective alternative clinical therapy for CLI, using a nanomedicine approach.

Novel supramolecular luminescent metallogels containing Tb(iii) and Eu(iii) ions with benzene-1,3,5-tricarboxylic acid gelator: advancing semiconductor applications in microelectronic devices.

A novel strategy was employed to create supramolecular metallogels incorporating Tb(iii) and Eu(iii) ions using benzene-1,3,5-tricarboxylic acid (TA) as a gelator in N,N-dimethylformamide (DMF). Rheological analysis demonstrated their mechanical robustness under varying stress levels and angular frequencies. FESEM imaging revealed a flake-like hierarchical network for Tb-TA and a rod-shaped architecture for Eu-TA. EDX analysis confirmed essential chemical constituents within the metallogels. FT-IR, PXRD, Raman spectroscopy, and thermogravimetric analysis assessed their gelation process and material properties, showing semiconducting characteristics, validated by optical band-gap measurements. Metal-semiconductor junction-based devices integrating Al metal with Tb(iii)- and Eu(iii)-metallogels exhibited non-linear charge transport akin to a Schottky diode, indicating potential for advanced electronic device development. Direct utilization of benzene-1,3,5-tricarboxylic acid and Tb(iii)/Eu(iii) sources underscores their suitability as semiconducting materials for device fabrication. This study explores the versatile applications of Tb-TA and Eu-TA metallogels, offering insights for material science researchers.

Utilizing a Fe3O4 Magnetite Nanoparticle for Anode Modification in a Microbial Desalination Cell to Treat Saltwater.

The microbial desalination cell (MDC) is a bio-electrochemical system that exhibits the ability to oxidize organic compounds, produce energy, and decrease the saline concentrations within the desalination chamber. The selective removal of ions from the desalination chamber is significantly influenced by the anion and cation exchange membranes. In this study, a three-chamber microbial desalination cell was developed to treat seawater using a synthesize Fe3O4 magnetite nanoparticle (MNP)-modified anode. The impact of different performance parameters, such as temperature, pH, and concentrations of NPs, has been investigated in order to assess the performance of three-chamber MDCs in terms of energy recovery and salt removal. The evaluation criteria of the system included multiple factors such as chemical oxygen demand (COD), Coulombic efficiency (CE), desalination efficiency, as well as system aspects including voltage generation and power density. The highest COD% removal efficiency was 74% at 37 °C, pH = 7, and 30 g/L salt concentration with an optimized NPs concentration of 2.0 mg/cm2 impregnated on anode. The maximum Coulombic efficiency was 10.3% with the maximum power density of 4.3 W/m3. The effect of the nanoparticle concentration impregnated on the anode was clarified by the primary factor of analysis. This research has revealed consistent patterns in the enhancement of voltage generation, COD, and Coulombic efficiencies when incorporating higher concentrations of nanoparticles on the anode at a certain point.

A preclinical study to determine the anti-epileptic effect of biotin on maximal electroshock (MES) and pentylenetetrazole (PTZ) models in albino rats.

OBJECTIVES: Vitamin B7(biotin) is not synthesized in our body and is retrieved from some food products like eggs, liver, pork and leafy vegetables and as well as microbes of gut. Deficiency of biotin majorly leads to loss of hair, rashes over skin, lethargy and seizures. It is noted that biotin is an anti-oxidant and negates free radical effects. Biotin is also involved in carbon dioxide metabolism and it might alter seizure threshold. Studies also suggest its effect on lipid metabolism as well. So, the primary objective of this study was to assess the efficacy of biotin in maximal electric shock (MES) induced generalized tonic-clonic seizures (GTCS) and pentylenetetrazole (PTZ) induced absence seizures. The secondary objective is to study the effect of combined treatment of biotin and sodium valproate on seizures as well as plasma lipid profile in rats. METHODS: In our study 30 albino Wistar rats each were used in MES and PTZ model respectively. 30 rats were divided equally into following groups: I - distilled water (negative control) II - distilled water (positive control) III - sodium valproate (300 mg/kg) IV - biotin (10 mg/kg/day) V - biotin (10 mg/kg) + sodium valproate (150 mg/kg). RESULTS: We observed that the tonic hind limb extension was significantly reduced in the treatment group in MES model. Nitric oxide levels were also seen raised in combination group in MES model and all the treated groups in PTZ model. Biotin treated group showed increased high-density lipoproteins and reduced low density lipoproteins and triglycerides. CONCLUSIONS: Biotin had an additive effect to sodium valproate in both the models of epilepsy in rats. Further, it was also able to counteract hyperlipidemia cause by sodium valproate.

Exploring oral drug delivery: In vitro release and mathematical modeling of hydrophobic drug (Na-L-thyroxine) and its cyclodextrin inclusion complex in chitosan microparticles.

Na-l-Thyroxine (Na-l-Thy) is a frequently prescribed synthetic hormone for hypothyroidism treatment. Despite its efficacy, its hydrophobic nature poses a challenge for achieving optimal bioavailability. To address this, researchers explored various delivery methods, including micro-formulations and nano-formulations, for precise and prolonged release of hydrophobic and hydrophilic drugs. In this study, we developed micro-formulations with cyclodextrin and chitosan. Docking studies identified γ-cyclodextrin as the preferred option for forming a stable complex with Na-l-Thyroxine compared to α, and ß-cyclodextrins. Two micro-formulations were prepared compared: Na-l-Thyroxine loaded on chitosan (CS + Na-l-Thy) and Na-l-Thyroxine and γ-cyclodextrin inclusion complex (IC) loaded on chitosan (CS + IC). CS + IC exhibited superior encapsulation efficiency (91.25 %) and loading capacity (18.62 %) compared to CS + Na-l-Thy (encapsulation efficiency: 70.24 %, loading capacity: 21.18 %). Characterization using FTIR, SEM, and TGA validated successful encapsulation of Na-l-Thy in spherical microparticles with high thermal stability. In-vitro release studies at pH 1.2 and 7.4 showed that the CS + IC microparticles displayed gradual, consistent drug release compared to CS + Na-l-Thy -Thy. Both formulations showed faster release at pH 1.2 than at pH 7.4. Reaction kinetics analysis of release studies of CS + Na-l-Thy and CS + IC were best described by Higuchi kinetic model and Korsemeyer-Peppas kinetic model respectively. This study suggests that the CS + IC microparticles are an effective and stable delivery system for sustained release of hydrophobic Na-l-Thy.

Sustainable degradation of synthetic plastics: A solution to rising environmental concerns.

Plastics have a significant role in various sectors of the global economy since they are widely utilized in agriculture, architecture, and construction, as well as health and consumer goods. They play a crucial role in several industries as they are utilized in the production of diverse things such as defense materials, sanitary wares, tiles, plastic bottles, artificial leather, and various other household goods. Plastics are utilized in the packaging of food items, medications, detergents, and cosmetics. The overconsumption of plastics presents a significant peril to both the ecosystem and human existence on Earth. The accumulation of plastics on land and in the sea has sparked interest in finding ways to breakdown these polymers. It is necessary to employ suitable biodegradable techniques to decrease the accumulation of plastics in the environment. To address the environmental issues related to plastics, it is crucial to have a comprehensive understanding of the interaction between microorganisms and polymers. A wide range of creatures, particularly microbes, have developed techniques to survive and break down plastics. This review specifically examines the categorization of plastics based on their thermal and biodegradable properties, as well as the many types of degradation and biodegradation. It also discusses the various types of degradable plastics, the characterization of biodegradation, and the factors that influence the process of biodegradation. The plastic breakdown and bioremediation capabilities of these microbes make them ideal for green chemistry applications aimed at removing hazardous polymers from the ecosystem.

Drug Repositioning Using Computer-aided Drug Design (CADD).

Drug repositioning is a method of using authorized drugs for other unusually complex diseases. Compared to new drug development, this method is fast, low in cost, and effective. Through the use of outstanding bioinformatics tools, such as computer-aided drug design (CADD), computer strategies play a vital role in the re-transformation of drugs. The use of CADD's special strategy for target-based drug reuse is the most promising method, and its realization rate is high. In this review article, we have particularly focused on understanding the various technologies of CADD and the use of computer-aided drug design for target-based drug reuse, taking COVID-19 and cancer as examples. Finally, it is concluded that CADD technology is accelerating the development of repurposed drugs due to its many advantages, and there are many facts to prove that the new ligand-targeting strategy is a beneficial method and that it will gain momentum with the development of technology.

Rapid Semiconducting Supramolecular Mg(II)-Metallohydrogel: Exploring Its Potential in Nonvolatile Resistive Switching Applications and Antiseptic Wound Healing Properties.

An effective strategy was employed for the rapid development of a supramolecular metallohydrogel of Mg(II) ion (i.e., Mg@PEHA) using pentaethylenehexamine (PEHA) as a low-molecular-weight gelator in aqueous medium under ambient conditions. The mechanical stability of the synthesized Mg@PEHA metallohydrogel was characterized by using rheological analysis, which showed its robustness across different angular frequencies and oscillator stress levels. The metallohydrogel exhibited excellent thixotropic behavior, which signifies that Mg@PEHA has a self-healing nature. Field emission scanning electron microscopy and transmission electron microscopy images were utilized to explore the rectangular pebble-like hierarchical network of the Mg@PEHA metallohydrogel. Elemental mapping through energy-dispersive X-ray spectroscopy analysis confirmed the presence of primary chemical constituents in the metallohydrogel. Fourier transform infrared spectroscopy spectroscopy provided insights into the possible formation strategy of the metallohydrogel. In this work, Schottky diode structures in a metal-semiconductor-metal geometry based on a magnesium(II) metallohydrogel (Mg@PEHA) were constructed, and the charge transport behavior was observed. Additionally, a resistive random access memory (RRAM) device was developed using Mg@PEHA, which displayed bipolar resistive switching behavior at room temperature. The researchers investigated the switching mechanism, which involved the formation or rupture of conduction filaments, to gain insights into the resistive switching process. The RRAM device demonstrated excellent performance with a high ON/OFF ratio of approximately 100 and remarkable endurance of over 5000 switching cycles. RRAM devices exhibit good endurance, meaning they can endure a large number of read and write cycles without significant degradation in performance. RRAM devices have shown promising reliability in terms of long-term performance and stability, making them suitable for critical applications that require reliable memory solutions. Significant inhibitory activity against the drug-resistant Klebsiella pneumonia strain and its biofilm formation ability was demonstrated by Mg@PEHA. The minimum inhibitory concentration value of the metallohydrogel was determined to be 3 mg/mL when it was dissolved in 1% DMSO. To study the antibiofilm activity, an MTT assay was performed, revealing that biofilm inhibition (60%) commenced at 1 mg/mL of Mg@PEHA when dissolved in 1% DMSO. Moreover, in the mouse excisional wound model, Mg@PEHA played a crucial role in preventing postoperative wound infections and promoting wound healing.