RESUMEN
Time-resolved fluorescence spectroscopy plays a crucial role when studying dynamic properties of complex photochemical systems. Nevertheless, the analysis of measured time decays and the extraction of exponential lifetimes often requires either the experimental assessment or the modeling of the instrument response function (IRF). However, the intrinsic nature of the IRF in the measurement process, which may vary across measurements due to chemical and instrumental factors, jeopardizes the results obtained by reconvolution approaches. In this paper, we introduce a novel methodology, called blind instrument response function identification (BIRFI), which enables the direct estimation of the IRF from the collected data. It capitalizes on the properties of single exponential signals to transform a deconvolution problem into a well-posed system identification problem. To delve into the specifics, we provide a step-by-step description of the BIRFI method and a protocol for its application to fluorescence decays. The performance of BIRFI is evaluated using simulated and time-correlated single-photon counting data. Our results demonstrate that the BIRFI methodology allows an accurate recovery of the IRF, yielding comparable or even superior results compared with those obtained with experimental IRFs when they are used for reconvolution by parametric model fitting.
RESUMEN
In the context of spectral unmixing, essential information corresponds to the most linearly dissimilar rows and/or columns of a two-way data matrix which are indispensable to reproduce the full data matrix in a convex linear way. Essential information has recently been shown accessible on-the-fly via a decomposition of the measured spectra in the Fourier domain and has opened new perspectives for fast Raman hyperspectral microimaging. In addition, when some spatial prior is available about the sample, such as the existence of homogeneous objects in the image, further acceleration for the data acquisition procedure can be achieved by using superpixels. The expected gain in acquisition time is shown to be around three order of magnitude on simulated and real data with very limited distortions of the estimated spectrum of each object composing the images.
RESUMEN
Multilabel fluorescence imaging is essential for the visualization of complex systems, though a major challenge is the limited width of the useable spectral window. Here, we present a new method, exNEEMO, that enables per-pixel quantification of spectrally-overlapping fluorophores based on their light-induced dynamics, in a way that is compatible with a very broad range of timescales over which these dynamics may occur. Our approach makes use of intra-exposure modulation of the excitation light to distinguish the different emitters given their reference responses to this modulation. We use the approach to simultaneously image four green photochromic fluorescent proteins at the full spatial resolution of the imaging.
RESUMEN
In the context of multivariate curve resolution (MCR) and spectral unmixing, essential information (EI) corresponds to the most linearly dissimilar rows and/or columns of a two-way data matrix. In recent works, the assessment of EI has been revealed to be a very useful practical tool to select the most relevant spectral information before MCR analysis, key features being speed and compression ability. However, the canonical approach relies on the principal component analysis to evaluate the convex hull that encapsulates the data structure in the normalized score space. This implies that the evaluation of the essentiality of each spectrum can only be achieved after all the spectra have been acquired by the instrument. This paper proposes a new approach to extract EI in the Fourier domain (EIFD). Spectral information is transformed into Fourier coefficients, and EI is assessed from a convex hull analysis of the data point cloud in the 2D phasor plots of a few selected harmonics. Because the coordinate system of a phasor plot does not depend on the data themselves, the evaluation of the essentiality of the information carried by each spectrum can be achieved individually and independently from the others. As a result, time-consuming operations like Raman spectral imaging can be significantly accelerated exploiting a chemometric-driven (i.e., based on the EI content of a spectral pixel) procedure for data acquisition and targeted sampling. The usefulness of EIFD is shown by analyzing Raman hyperspectral microimaging data, demonstrating a potential 50-fold acceleration of Raman acquisition.
RESUMEN
The unmixing of multiexponential decay signals into monoexponential components using soft modelling approaches is a challenging task due to the strong correlation and complete window overlap of the profiles. To solve this problem, slicing methodologies, such as PowerSlicing, tensorize the original data matrix into a three-way data array that can be decomposed based on trilinear models providing unique solutions. Satisfactory results have been reported for different types of data, e.g., nuclear magnetic resonance or time-resolved fluorescence spectra. However, when decay signals are described by only a few sampling (time) points, a significant degradation of the results can be observed in terms of accuracy and precision of the recovered profiles. In this work, we propose a methodology called Kernelizing that provides a more efficient way to tensorize data matrices of multiexponential decays. Kernelizing relies on the invariance of exponential decays, i.e., when convolving a monoexponential decaying function with any positive function of finite width (hereafter called "kernel"), the shape of the decay (determined by the characteristic decay constant) remains unchanged and only the preexponential factor varies. The way preexponential factors are affected across the sample and time modes is linear, and it only depends on the kernel used. Thus, using kernels of different shapes, a set of convolved curves can be obtained for every sample, and a three-way data array generated, for which the modes are sample, time and kernelizing effect. This three-way array can be afterwards analyzed by a trilinear decomposition method, such as PARAFAC-ALS, to resolve the underlying monoexponential profiles. To validate this new approach and assess its performance, we applied Kernelizing to simulated datasets, real time-resolved fluorescence spectra collected on mixtures of fluorophores and fluorescence-lifetime imaging microscopy data. When the measured multiexponential decays feature few sampling points (down to fifteen), more accurate trilinear model estimates are obtained than when using slicing methodologies.
RESUMEN
This article contains a comprehensive tutorial on classification by means of Soft Independent Modelling of Class Analogy (SIMCA). Such a tutorial was conceived in an attempt to offer pragmatic guidelines for a sensible and correct utilisation of this tool as well as answers to three basic questions: "why employing SIMCA?", "when employing SIMCA?" and "how employing/not employing SIMCA?". With this purpose in mind, the following points are here addressed: i) the mathematical and statistical fundamentals of the SIMCA approach are presented; ii) distinct variants of the original SIMCA algorithm are thoroughly described and compared in two different case-studies; iii) a flowchart outlining how to fine-tune the parameters of a SIMCA model for achieving an optimal performance is provided; iv) figures of merit and graphical tools for SIMCA model assessment are illustrated and v) computational details and rational suggestions about SIMCA model validation are given. Moreover, a novel Matlab toolbox, which encompasses routines and functions for running and contrasting all the aforementioned SIMCA versions is also made available.
RESUMEN
Multivariate curve resolution (MCR) methods aim at extracting pure component profiles from mixed spectral data and can be applied to high-dimensional data, e.g., from process spectroscopy or hyperspectral imaging techniques. One often observes that some parts of this data, namely certain rows and columns of the data matrix, are considered essential for MCR outcomes, while other parts are of minor importance. Some methods for determining essential data are known, but all have different disadvantages concerning the application for noisy data. This work presents a new approach on how to detect the essential information for noisy, experimental spectral data. Active nonnegativity constraints in combination with duality arguments are the key ingredients for determining essential spectra and frequency channels. The new approach is conceptually simple, computationally cheap and stable with respect to noise. The algorithm is tested for noisy experimental Raman, UV-Vis and FTIR-SEC data.
Asunto(s)
Algoritmos , Análisis de los Mínimos CuadradosRESUMEN
We present a fast and simple algorithm for super-resolution with single images. It is based on penalized least squares regression and exploits the tensor structure of two-dimensional convolution. A ridge penalty and a difference penalty are combined; the former removes singularities, while the latter eliminates ringing. We exploit the conjugate gradient algorithm to avoid explicit matrix inversion. Large images are handled with ease: zooming a 100 by 100 pixel image to 800 by 800 pixels takes less than a second on an average PC. Several examples, from applications in wide-field fluorescence microscopy, illustrate performance.
Asunto(s)
Algoritmos , Microscopía FluorescenteRESUMEN
A substantial number of Orange Carotenoid Protein (OCP) studies have aimed to describe the evolution of singlet excited states leading to the formation of a photoactivated form, OCPR. The most recent one suggests that 3 ps-lived excited states are formed after the sub-100 fs decay of the initial S2 state. The S* state, which has the longest reported lifetime of a few to tens of picoseconds, is considered to be the precursor of the first red photoproduct P1. Here, we report the ultrafast photodynamics of the OCP from Synechocystis PCC 6803 carried out using visible-near infrared femtosecond time-resolved absorption spectroscopy as a function of the excitation pulse power and wavelength. We found that a carotenoid radical cation can form even at relatively low excitation power, obscuring the determination of photoactivation yields for P1. Moreover, the comparison of green (540 nm) and blue (470 nm) excitations revealed the existence of an hitherto uncharacterized excited state, denoted as Sâ¼, living a few tens of picoseconds and formed only upon 470 nm excitation. Because neither the P1 quantum yield nor the photoactivation speed over hundreds of seconds vary under green and blue continuous irradiation, this Sâ¼ species is unlikely to be involved in the photoactivation mechanism leading to OCPR. We also addressed the effect of His-tagging at the N- or C-termini on the excited-state photophysical properties. Differences in spectral signatures and lifetimes of the different excited states were observed at a variance with the usual assumption that His-tagging hardly influences protein dynamics and function. Altogether our results advocate for the careful consideration of the excitation power and His-tag position when comparing the photoactivation of different OCP variants and beg to revisit the notion that S* is the precursor of photoactivated OCPR.
RESUMEN
The way in which aquatic systems is sampled has a strong influence on our understanding of them, especially when they are highly dynamic. High frequency sampling has the advantage over spot sampling for representativeness but leads to a high amount of analysis. This study proposes a new methodology to choose when sampling accurately with an automated sampler coupled with a high frequency (HF) multiparameter probe. After each HF measurement, an optimised sampling algorithm (OSA) determines on-the-fly the relevance of taking a new sample in relation to previous waters already collected. Once the OSA was optimised, considering the number of HF parameters and their variabilities, it was demonstrated through a study case that the number of samples could be significantly reduced, while still covering periods of low and high variabilities. The comparison between the total HF dataset and the sampled subdataset shows that physicochemical parameter variability is preserved (Pearson correlations > 0.96) as well as the multiparameter variability (PCA axes remained similar with Tucker congruence > 0.99). This algorithm simplifies HF studies by making it easier to take samples during brief phenomena such as storms or accidental spills that are often poorly monitored. In addition, it optimises the number of samples to be taken to correctly describe a system and thus reduce the human and financial costs of these environmental studies.
Asunto(s)
Contaminantes Químicos del Agua , Algoritmos , Monitoreo del Ambiente/métodos , Agua/análisis , Contaminantes Químicos del Agua/análisisRESUMEN
[This corrects the article DOI: 10.3389/fchem.2022.818974.].
RESUMEN
Hyperspectral imaging has recently gained increasing attention from academic and industrial world due to its capability of providing both spatial and physico-chemical information about the investigated objects. While this analytical approach is experiencing a substantial success and diffusion in very disparate scenarios, far less exploited is the possibility of collecting sequences of hyperspectral images over time for monitoring dynamic scenes. This trend is mainly justified by the fact that these so-called hyperspectral videos usually result in BIG DATA sets, requiring TBs of computer memory to be both stored and processed. Clearly, standard chemometric techniques do need to be somehow adapted or expanded to be capable of dealing with such massive amounts of information. In addition, hyperspectral video data are often affected by many different sources of variations in sample chemistry (for example, light absorption effects) and sample physics (light scattering effects) as well as by systematic errors (associated, e.g., to fluctuations in the behaviour of the light source and/or of the camera). Therefore, identifying, disentangling and interpreting all these distinct sources of information represents undoubtedly a challenging task. In view of all these aspects, the present work describes a multivariate hybrid modelling framework for the analysis of hyperspectral videos, which involves spatial, spectral and temporal parametrisations of both known and unknown chemical and physical phenomena underlying complex real-world systems. Such a framework encompasses three different computational steps: 1) motions ongoing within the inspected scene are estimated by optical flow analysis and compensated through IDLE modelling; 2) chemical variations are quantified and separated from physical variations by means of Extended Multiplicative Signal Correction (EMSC); 3) the resulting light scattering and light absorption data are subjected to the On-The-Fly Processing and summarised spectrally, spatially and over time. The developed methodology was here tested on a near-infrared hyperspectral video of a piece of wood undergoing drying. It led to a significant reduction of the size of the original measurements recorded and, at the same time, provided valuable information about systematic variations generated by the phenomena behind the monitored process.
RESUMEN
A novel fast and automatic methodology for the hierarchical classification and similarity matching of mid-infrared spectra of paint samples based on the principles of Soft Independent Modelling of Class Analogy (SIMCA) and on the definition and properties of the Mahalanobis distance is here proposed. This approach was tested in a so-called market study (i.e., targeting products largely accessible to the general public and conceived for a considerably wide range of usages) conducted across the surroundings of the city of Lille, in France, and has permitted not only to successfully achieve the chemical characterisation of most of the analysed samples but also to discover specific commonality patterns among specimens sharing the same chemical features.
Asunto(s)
PinturaRESUMEN
Multivariate curve resolution unmixing of hyperspectral imaging data can be challenging when low sources of variance are present in complex samples, as for minor (low-concentrated) chemical compounds in pharmaceutical formulations. In this work, it was shown how the reduction of hyperspectral imaging data matrices through the selection of essential spectra can be crucial for the analysis of complex unknown pharmaceutical formulation applying Multivariate Curve Resolution - Alternating Least Squares (MCR-ALS). Results were obtained on simulated datasets and on real FT-IR and Raman hyperspectral images of both genuine and falsified tablets. When simulating the presence of minor compounds, different situations were investigated considering the presence of single pixels of pure composition as well as binary and ternary mixtures. The comparison of the results obtained applying MCR-ALS on the reduced data matrices with those obtained on the full matrices revealed unequivocal: more accurate decomposition could be achieved when only essential spectra were analyzed. Indeed, when analyzing the full dataset, MCR-ALS failed resolving minor compounds even though pure spectra were provided as initial estimation, as shown for Raman hyperspectral imaging data obtained on a medicine sample containing 7 chemical compounds. In contrast, when considering the reduced dataset, all minor contributions (down to 1 pixel over 17,956) were successfully unmixed. The same conclusion could be drawn from the results obtained analysing FT-IR hyperspectral imaging data of a falsified medicine.
Asunto(s)
Composición de Medicamentos , Análisis de los Mínimos Cuadrados , Análisis Multivariante , Espectroscopía Infrarroja por Transformada de Fourier/métodos , ComprimidosRESUMEN
The emergence of new spectral imaging applications in many science fields and in industry has not come to be a surprise, considering the immense potential this technique has to map spectral information. In the case of near-infrared spectral imaging, a rapid evolution of the technology has made it more and more appealing in non-destructive analysis of food and materials as well as in process monitoring applications. However, despite its great diffusion, some challenges remain open from the data analysis point of view, with the aim to fully uncover patterns and unveil the interplay between both the spatial and spectral domains. Here we propose a new approach, called Image Decomposition, Encoding and Localization (IDEL), where a spatial perspective is taken for the analysis of spectral images, while maintaining the significant information within the spectral domain. The methodology benefits from wavelet transform to exploit spatial features, encoding the outcoming images into a set of descriptors and utilizing multivariate analysis to isolate and extract the significant spatial-spectral information. A forensic case study of near-infrared images of biological stains on cotton fabrics is used as a benchmark. The stain and fabric have hardly distinguishable spectral signatures due to strong scattering effects that originate from the rough surface of the fabric and the high spectral absorbance of cotton in the near-infrared range. There is no selective information that can isolate signals related to these two components in the spectral images under study, and the complex spatial structure is highly interconnected to the spectral signatures. IDEL was capable of isolating the stains, (spatial) scattering effects, and a possible drying effect from the stains. It was possible to recover, at the same time, specific spectral regions that mostly highlight these isolated spatial structures, which was previously unobtainable.
Asunto(s)
Espectroscopía Infrarroja CortaRESUMEN
Fluorescence microscopy is an extremely powerful technique that allows to distinguish multiple labels based on their emission color or other properties, such as their photobleaching and fluorescence recovery kinetics. These kinetics are ideally assumed to be mono-exponential in nature, where the time constants intrinsic to each fluorophore can be used to quantify their presence in the sample. However, these time constants also depend on the specifics of the illumination and sample conditions, meaning that identifying the different contributions in a mixture using a single-channel detection may not be straightforward. In this work, we propose a factor analysis approach called Slicing to identify the different contributions in a multiplexed fluorescence microscopy image exploiting a single measurement channel. With Slicing, a two-way dataset is rearranged into a three-way dataset, which allows the application of a trilinear decomposition model to derive individual profiles for all the model components. We demonstrate this method on bleaching - recovery fluorescence microscopy imaging data of U2OS cells, allowing us to determine the spatial distribution of the dyes and their associated characteristic relaxation traces, without relying on a parametric fitting. By requiring little a priori knowledge and efficiently handling perturbation factors, our method represents a general approach for the recovery of multiple mono-exponential profiles from single-channel microscopy data.
Asunto(s)
Iluminación , Imagen Óptica , Colorantes Fluorescentes , Cinética , Microscopía FluorescenteRESUMEN
RsEGFP2 is a reversibly photoswitchable fluorescent protein used in super-resolved optical microscopies, which can be toggled between a fluorescent On state and a nonfluorescent Off state. Previous time-resolved ultraviolet-visible spectroscopic studies have shown that the Off-to-On photoactivation extends over the femto- to millisecond time scale and involves two picosecond lifetime excited states and four ground state intermediates, reflecting a trans-to-cis excited state isomerization, a millisecond deprotonation, and protein structural reorganizations. Femto- to millisecond time-resolved multiple-probe infrared spectroscopy (TRMPS-IR) can reveal structural aspects of intermediate species. Here we apply TRMPS-IR to rsEGFP2 and implement a Savitzky-Golay derivative analysis to correct for baseline drift. The results reveal that a subpicosecond twisted excited state precursor controls the trans-to-cis isomerization and the chromophore reaches its final position in the protein pocket within 100 ps. A new step with a time constant of 42 ns is reported and assigned to structural relaxation of the protein that occurs prior to the deprotonation of the chromophore on the millisecond time scale.
Asunto(s)
Proteínas Luminiscentes/química , Compuestos de Bencilideno/química , Compuestos de Bencilideno/efectos de la radiación , Imidazoles/química , Imidazoles/efectos de la radiación , Isomerismo , Proteínas Luminiscentes/efectos de la radiación , Conformación Proteica , Espectrofotometría InfrarrojaRESUMEN
Time-resolved fluorescence spectroscopy (TRFS), i.e., measurement of fluorescence decay curves for different excitation and/or emission wavelengths, provides specific and sensitive local information on molecules and on their environment. However, TRFS relies on multiexponential data fitting to derive fluorescence lifetimes from the measured decay curves and the time resolution of the technique is limited by the instrumental response function (IRF). We propose here a multivariate curve resolution (MCR) approach based on data slicing to perform tailored and fit-free analysis of multiexponential fluorescence decay curves. MCR slicing, taking as a basic framework the multivariate curve resolution-alternating least-squares (MCR-ALS) soft-modeling algorithm, relies on a hybrid bilinear/trilinear data decomposition. A key feature of the method is that it enables the recovery of individual components characterized by decay profiles that are only partially describable by monoexponential functions. For TRFS data, not only pure multiexponential tail information but also shorter time delay information can be decomposed, where the signal deviates from the ideal exponential behavior due to the limited time resolution. The accuracy of the proposed approach is validated by analyzing mixtures of three commercial dyes and characterizing the mixture composition, lifetimes, and associated contributions, even in situations where only ternary mixture samples are available. MCR slicing is also applied to the analysis of TRFS data obtained on a photoswitchable fluorescent protein (rsEGFP2). Three fluorescence lifetimes are extracted, along with the profile of the IRF, highlighting that decomposition of complex systems, for which individual isomers are characterized by different exponential decays, can also be achieved.
Asunto(s)
Algoritmos , Análisis de los Mínimos Cuadrados , Análisis Multivariante , Espectrometría de FluorescenciaRESUMEN
Interest in the human microbiome is growing and has been, for the past decade, leading to new insights into disease etiology and general human biology. Stimulated by these advances and in a parallel trend, new DNA sequencing platforms have been developed, radically expanding the possibilities in microbiome research. While DNA sequencing plays a pivotal role in this field, there are some technological hurdles that are yet to be overcome. Targeting of the 16S rRNA gene with amplicon sequencing, for instance, is frequently used for sample composition profiling due to its short sample-to-result time and low cost, which counterbalance its low resolution (genus to species level). On the other hand, more comprehensive methods, namely, whole-genome sequencing (WGS) and shallow shotgun sequencing, are capable of yielding single-gene- and functional-level resolution at a higher cost and much higher sample processing time. It goes without saying that the existing gap between these two types of approaches still calls for the development of a fast, robust, and low-cost analytical platform. In search of the latter, we investigated the taxonomic resolution of methyltransferase-mediated DNA optical mapping and found that strain-level identification can be achieved with both global and whole-genome analyses as well as using a unique identifier (UI) database. In addition, we demonstrated that UI selection in DNA optical mapping, unlike variable region selection in 16S amplicon sequencing, is not limited to any genomic location, explaining the increase in resolution. This latter aspect was highlighted by SCCmec typing in methicillin-resistant Staphylococcus aureus (MRSA) using a simulated data set. In conclusion, we propose DNA optical mapping as a method that has the potential to be highly complementary to current sequencing platforms.