Creation and Validation of a Novel 3-Dimensional Pediatric Hip Ultrasound Model.

OBJECTIVES: The aim of this study was to create and validate a 3-dimensional (3D) ultrasound model with normal and abnormal pediatric hip joint anatomy that is comparable to a pediatric hip joint in appearance and anatomy and replicates sonographic characteristics of a pediatric hip joint. METHODS: A 3D rendering of the bone and soft tissue was created from a computed tomography pelvic scan of a pediatric patient. This rendering was modified to include a unilateral joint effusion. The bone was 3D printed with a photopolymer plastic, whereas the soft tissue was cast with a silicone mixture in a 3D-printed mold. The effusion was simulated by injecting saline into the soft tissue cavity surrounding the bone. The ultrasound model was validated by pediatric point-of-care ultrasonographers at an international pediatric ultrasound conference. RESULTS: A pediatric hip ultrasound model was developed that simulates both normal and abnormal pediatric hip joint anatomy, each with an appropriately sized, measurable joint effusion. Validation by pediatric point-of-care ultrasonographers showed that the key aspects of a normal pediatric hip joint (femoral physis, sloped femoral neck, and adequate soft tissue) with an identifiable and measurable effusion were included in the ultrasound model. CONCLUSIONS: In this study, we successfully created a cost-effective, reusable, and reproducible 3D pediatric hip ultrasound model. The majority of pediatric point-of-care ultrasonographers who evaluated the model agreed that this model is comparable to a pediatric patient for the purpose of teaching ultrasound skills and joint space measurement.

Stenting of the Patent Ductus Arteriosus.

Since PDA stenting was first attempted in the early 1990s, significant technical advancements have improved outcomes and some centers have even transitioned to exclusive PDA stenting for all infants with duct-dependent pulmonary circulation. In addition to its use in infants with duct-dependent pulmonary circulation, PDA stenting has also been adapted as a percutaneous palliative option for suprasystemic pulmonary arterial hypertension and as a component of the hybrid procedure. In this article, the authors aim to review indications and outcomes for PDA stenting, describe the procedure, and discuss future directions.

Morphological and ultrastructural investigation of the posterior atlanto-occipital membrane: Comparing children with Chiari malformation type I and controls.

INTRODUCTION: The fibrous posterior atlanto-occipital membrane (PAOM) at the craniocervical junction is typically removed during decompression surgery for Chiari malformation type I (CM-I); however, its importance and ultrastructural architecture have not been investigated in children. We hypothesized that there are structural differences in the PAOM of patients with CM-I and those without. METHODS: In this prospective study, blinded pathological analysis was performed on PAOM specimens from children who had surgery for CM-I and children who had surgery for posterior fossa tumors (controls). Clinical and radiographic data were collected. Statistical analysis included comparisons between the CM-I and control cohorts and correlations with imaging measures. RESULTS: A total of 35 children (mean age at surgery 10.7 years; 94.3% white) with viable specimens for evaluation were enrolled: 24 with CM-I and 11 controls. There were no statistical demographic differences between the two cohorts. Four children had a family history of CM-I and five had a syndromic condition. The cohorts had similar measurements of tonsillar descent, syringomyelia, basion to C2, and condylar-to-C2 vertical axis (all p>0.05). The clival-axial angle was lower in patients with CM-I (138.1 vs. 149.3 degrees, p = 0.016). Morphologically, the PAOM demonstrated statistically higher proportions of disorganized architecture in patients with CM-I (75.0% vs. 36.4%, p = 0.012). There were no differences in PAOM fat, elastin, or collagen percentages overall and no differences in imaging or ultrastructural findings between male and female patients. Posterior fossa volume was lower in children with CM-I (163,234 mm3 vs. 218,305 mm3, p<0.001), a difference that persisted after normalizing for patient height (129.9 vs. 160.9, p = 0.028). CONCLUSIONS: In patients with CM-I, the PAOM demonstrates disorganized architecture compared with that of control patients. This likely represents an anatomic adaptation in the presence of CM-I rather than a pathologic contribution.

Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: pediatric congenital heart disease conditions.

BACKGROUND: The use of medical 3D printing (focusing on anatomical modeling) has continued to grow since the Radiological Society of North America's (RSNA) 3D Printing Special Interest Group (3DPSIG) released its initial guideline and appropriateness rating document in 2018. The 3DPSIG formed a focused writing group to provide updated appropriateness ratings for 3D printing anatomical models across a variety of congenital heart disease. Evidence-based- (where available) and expert-consensus-driven appropriateness ratings are provided for twenty-eight congenital heart lesion categories. METHODS: A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with pediatric congenital heart disease indications. Each study was vetted by the authors and strength of evidence was assessed according to published appropriateness ratings. RESULTS: Evidence-based recommendations for when 3D printing is appropriate are provided for pediatric congenital heart lesions. Recommendations are provided in accordance with strength of evidence of publications corresponding to each cardiac clinical scenario combined with expert opinion from members of the 3DPSIG. CONCLUSIONS: This consensus appropriateness ratings document, created by the members of the RSNA 3DPSIG, provides a reference for clinical standards of 3D printing for pediatric congenital heart disease clinical scenarios.

Clinical situations for which 3D Printing is considered an appropriate representation or extension of data contained in a medical imaging examination: vascular conditions.

BACKGROUND: Medical three-dimensional (3D) printing has demonstrated utility and value in anatomic models for vascular conditions. A writing group composed of the Radiological Society of North America (RSNA) Special Interest Group on 3D Printing (3DPSIG) provides appropriateness recommendations for vascular 3D printing indications. METHODS: A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with vascular indications. Each study was vetted by the authors and strength of evidence was assessed according to published appropriateness ratings. RESULTS: Evidence-based recommendations for when 3D printing is appropriate are provided for the following areas: aneurysm, dissection, extremity vascular disease, other arterial diseases, acute venous thromboembolic disease, venous disorders, lymphedema, congenital vascular malformations, vascular trauma, vascular tumors, visceral vasculature for surgical planning, dialysis access, vascular research/development and modeling, and other vasculopathy. Recommendations are provided in accordance with strength of evidence of publications corresponding to each vascular condition combined with expert opinion from members of the 3DPSIG. CONCLUSION: This consensus appropriateness ratings document, created by the members of the 3DPSIG, provides an updated reference for clinical standards of 3D printing for the care of patients with vascular conditions.

Heart rate and autonomic biomarkers distinguish convulsive epileptic vs. functional or dissociative seizures.

OBJECTIVE: 20-40% of individuals whose seizures are not controlled by anti-seizure medications exhibit manifestations comparable to epileptic seizures (ES), but there are no EEG correlates. These events are called functional or dissociative seizures (FDS). Due to limited access to EEG-monitoring and inconclusive results, we aimed to develop an alternative diagnostic tool that distinguishes ES vs. FDS. We evaluated the temporal evolution of ECG-based measures of autonomic function (heart rate variability, HRV) to determine whether they distinguish ES vs. FDS. METHODS: The prospective study includes patients admitted to the University of Rochester Epilepsy Monitoring Unit. Participants are 18-65 years old, without therapies or co-morbidities associated with altered autonomics. A habitual ES or FDS is recorded during admission. HRV analysis is performed to evaluate the temporal changes in autonomic function during the peri­ictal period (150-minutes each pre-/post-ictal). We determined if autonomic measures distinguish ES vs. FDS. RESULTS: The study includes 53 ES and 46 FDS. Temporal evolution of HR and autonomics significantly differ surrounding ES vs. FDS. The pre-to-post-ictal change (delta) in HR differs surrounding ES vs. FDS, stratified for convulsive and non-convulsive events. Post-ictal HR, total autonomic (SDNN & Total Power), vagal (RMSSD & HF), and baroreflex (LF) function differ for convulsive ES vs. convulsive FDS. HR distinguishes non-convulsive ES vs. non-convulsive FDS with ROC>0.7, sensitivity>70%, but specificity<50%. HR-delta and post-ictal HR, SDNN, RMSSD, LF, HF, and Total Power each distinguish convulsive ES vs. convulsive FDS (ROC, 0.83-0.98). Models with HR-delta and post-ictal HR provide the highest diagnostic accuracy for convulsive ES vs. convulsive FDS: 92% sensitivity, 94% specificity, ROC 0.99). SIGNIFICANCE: HR and HRV measures accurately distinguish convulsive, but not non-convulsive, events (ES vs. FDS). Results establish the framework for future studies to apply this diagnostic tool to more heterogeneous populations, and on out-of-hospital recordings, particularly for populations without access to epilepsy monitoring units.

Surgical Mitral Valve Replacement Using a Catheter-Based MelodyTM Valve in a Landing Zone Constructed With a PTFE-Covered Expandable Cheatham-PlatinumTM Stent.

Mitral valve replacement using a Melody valve is a promising solution to the challenge of surgical mitral valve replacement in infants with a hypoplastic annulus. We report the creation of a landing zone in the mitral valve annulus using a Cheatham-Platinum (CP)-covered stent that facilitates Melody valve placement, helps prevent paravalvular leak, minimizes left ventricular outflow tract obstruction, and allows for potential future dilation of the valve.

Transcatheter Hepatic Conduit-Azygous Vein Connection Reduces Pulmonary Arteriovenous Malformations in a Cyanotic Fontan Patient.

The authors report a closed-chest, transcatheter large-vessel connection (hepatic conduit to azygous vein) to reverse pulmonary arteriovenous malformations in a 10-year-old patient after Fontan for heterotaxy/interrupted inferior vena cava, with an increase in oxygen saturation from 78% to 96%. Computational fluid dynamics estimated a 14-fold increase in hepatic blood flow to the left pulmonary artery (from 1.3% to 14%). (Level of Difficulty: Advanced.).

Radiological Society of North America (RSNA) 3D Printing Special Interest Group (SIG) clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: breast conditions.

The use of medical 3D printing has expanded dramatically for breast diseases. A writing group composed of the Radiological Society of North America (RSNA) Special Interest Group on 3D Printing (SIG) provides updated appropriateness criteria for breast 3D printing in various clinical scenarios. Evidence-based appropriateness criteria are provided for the following clinical scenarios: benign breast lesions and high-risk breast lesions, breast cancer, breast reconstruction, and breast radiation (treatment planning and radiation delivery).

Validation of a three-dimensional printed pediatric middle ear model for endoscopic surgery training.

Objective: The purpose of this study is to assess the anatomical appropriateness of a three-dimensional (3D) printed pediatric middle ear model with a replaceable middle ear unit as an endoscopic ear surgery (EES) simulator. Methods: Single-blinded, prospective, proof-of-concept study conducted in a simulation operative suite. A simulator was developed through segmentation of source images and multi-material 3D printing. Subjects were asked to point to seven anatomical sites before and after a short anatomy presentation of a human middle ear photograph. They also filled out a survey about the feasibility of the model. Outcome variables included survey scores, pre-anatomy lesson (PreAL) and post-anatomy lesson (PostAL) quiz scores. Results: There were 24 participants (19 residents, 1 fellow, and 4 attendings), none with self-reported proficiency in EES. The PreAL mean score was 4.42 and PostAL quiz mean score was 5.32 (average improvement of 43% [CI = 17%-70%]; p = .003). The higher the level of training, the higher the PreAL scores (0.55 points per year of training; p = .004). The subspecialty (otology, other, in-training) was also associated with the PreAL scores (p = .004). Total survey score means were 22.8 (out of 30). Conclusion: The results of our study suggest that our model has adequate anatomical high fidelity to mimic a real, pediatric temporal bone for EES. As 3D printing technologies continue to advance, the quality of ear models has the potential to provide improved surgical training for pediatric EES. Level of Evidence: 4.

Neonatal Myocardial Infarction: A Proposed Algorithm for Coronary Arterial Thrombus Management.

BACKGROUND: Neonatal myocardial infarction is rare and is associated with a high mortality of 40% to 50%. We report our experience with neonatal myocardial infarction, including presentation, management, outcomes, and our current patient management algorithm. METHODS: We reviewed all infants admitted with a diagnosis of coronary artery thrombosis, coronary ischemia, or myocardial infarction between January 2015 and May 2021. RESULTS: We identified 21 patients (median age, 1 [interquartile range (IQR), 0.25-9.00] day; weight, 3.2 [IQR, 2.9-3.7] kg). Presentation included respiratory distress (16), shock (3), and murmur (2). Regional wall motion abnormalities by echocardiogram were a key criterion for diagnosis and were present in all 21 with varying degrees of depressed left ventricular function (severe [8], moderate [6], mild [2], and low normal [5]). Ejection fraction ranged from 20% to 54% (median, 43% [IQR, 34%-51%]). Mitral regurgitation was present in 19 (90%), left atrial dilation in 15 (71%), and pulmonary hypertension in 18 (86%). ECG was abnormal in 19 (90%). Median troponin I was 0.18 (IQR, 0.12-0.56) ng/mL. Median BNP (B-type natriuretic peptide) was 2100 (IQR, 924-2325) pg/mL. Seventeen had documented coronary thrombosis by cardiac catheterization. Seventeen (81%) were treated with intracoronary tPA (tissue-type plasminogen activator) followed by systemic heparin, AT (antithrombin), and intravenous nitroglycerin, and 4 (19%) were treated with systemic heparin, AT, and intravenous nitroglycerin alone. Nineteen of 21 recovered. One died (also had infradiaphragmatic total anomalous pulmonary venous return). One patient required a ventricular assist device and later underwent heart transplant; this patient was diagnosed late at 5 weeks of age and did not respond to tPA. Nineteen of 21 (90%) regained normal left ventricular function (ejection fraction, 60%-74%; mean, 65% [IQR, 61%-67%]) at latest follow-up (median, 6.8 [IQR, 3.58-14.72] months). Two of 21 (10%) had residual trivial mitral regurgitation. After analysis of these results, we present our current algorithm, which developed and matured over time, to manage neonatal myocardial infarction. CONCLUSIONS: We experienced a lower mortality rate for infants with neonatal infarction than that reported in the literature. We propose a post hoc algorithm that may lead to improvement in patient outcomes following coronary artery thrombus.

Purpose-Built Transcatheter Cavopulmonary Anastomosis Device Requirements: Multi-Modality Imaging Evaluation.

BACKGROUND/PURPOSE: Patients with a functional single ventricle undergo multiple, palliative open-heart surgeries. This includes a superior cavopulmonary anastomosis or bidirectional Glenn shunt. A less-invasive transcatheter approach may reduce morbidity. METHODS/MATERIALS: We analyzed pre-Glenn X-ray contrast angiography (XA), cardiac computed tomography (CT), and cardiac magnetic resonance (CMR) studies. RESULTS: Over an eleven-year period (1/2007 - 6/2017), 139 Glenn surgeries were performed at our institution. The typical age range at surgery was 59 - 371 days (median = 163; IQR = 138 - 203). Eight-nine XA, ten CT, and ten CMR studies obtained from these patients were analyzed. Cephalad SVC measurements (millimeters) were 7.3 ± 1.7 (XA), 7.7 ± 1.6 (CT) and 6.9 ± 1.8 (CMR). RPA measurements were 7.3 ± 1.9 (XA), 7.4 ± 1.6 (CT) and 6.6 ± 1.9 (CMR). Potential device lengths were 10.9 ± 6 - 17.4 ± 6.4 (XA), 10.1 ± 2.1 - 17.7 ± 2.4 (CT) and 17.3 ± 4. - 23.7 ± 5.5 (CMR). SVC-RPA angle (degrees) was 132.9 ± 13.2 (CT) and 140 ± 10.2 (MRI). Image quality of all CT (100%), almost all XA (SVC 100%, RPA 99%), and most MRI (SVC 80%, RPA 90%) were deemed sufficient. Parametric modeling virtual fit device with 10 mm diameter and 20 - 25 mm length was ideal. CONCLUSIONS: Ideal transcatheter cavopulmonary shunt device for the typical patient would be 10 mm in diameter and 20-25 mm in length.

Repair of Anomalous Single Coronary Artery From the Pulmonary Artery (ASCAPA).

We describe the management of an infant presenting with severe heart failure at 6 weeks of age found to have an anomalous single coronary artery originating from the main pulmonary artery (MPA). This patient was transferred to our hospital and ultimately had their coronary artery translocated to the ascending aorta successfully. Preoperative severe left ventricular (LV) dysfunction and moderate/severe mitral regurgitation (MR) improved to normal function and mild-to-moderate MR 6 weeks postrepair. Three-dimensional CT reconstructions proved valuable and allowed for accurate preoperative planning leading to successful coronary transfer.

Microphase Separation of Resilin-like and Elastin-like Diblock Copolypeptides in Concentrated Solutions.

Diblock copolymers are valued for their ability to form thin films with nanoscale features that typically reflect those of their microphase-separated structures in concentrated solution. Here, we show that such self-assembled structures can be easily formed with diblock copolymers composed of thermally responsive polypeptides, such as resilin-like polypeptides (RLP) and elastin-like polypeptides (ELP), by exploiting the inverse temperature transition behavior of ELPs in aqueous media. Specifically, we examine the self-assembly of a series of RLP-b-ELP diblock copolypeptides in concentrated aqueous solution (30 and 50 wt %) by small-angle X-ray scattering (SAXS). By systematically varying RLP block length and temperature (10-45 °C), we observed microphase separation into hexagonally packed cylinders and lamellae. By analyzing the observed order-order transitions (OOT) and order-disorder transitions (ODT), we determined that self-assembly in this system is primarily driven by polymer-solvent interactions. While these thermally responsive polymers showed clear ODTs and OOTs at certain temperatures, temperature only had a weak effect on the spacing of the resulting nanostructures. In contrast, we found that nanostructure spacing was far more sensitive to RLP block length. Finally, we used atomic force microscopy (AFM) to demonstrate that spin casting RLP-b-ELP diblock copolypeptides also produce nanostructured thin films with spacings that correlate with those in concentrated solution.

Virtual and augmented reality for biomedical applications.

3D visualization technologies such as virtual reality (VR), augmented reality (AR), and mixed reality (MR) have gained popularity in the recent decade. Digital extended reality (XR) technologies have been adopted in various domains ranging from entertainment to education because of their accessibility and affordability. XR modalities create an immersive experience, enabling 3D visualization of the content without a conventional 2D display constraint. Here, we provide a perspective on XR in current biomedical applications and demonstrate case studies using cell biology concepts, multiplexed proteomics images, surgical data for heart operations, and cardiac 3D models. Emerging challenges associated with XR technologies in the context of adverse health effects and a cost comparison of distinct platforms are discussed. The presented XR platforms will be useful for biomedical education, medical training, surgical guidance, and molecular data visualization to enhance trainees' and students' learning, medical operation accuracy, and the comprehensibility of complex biological systems.

Proximal Femur Osteotomy Guided with Patient-Specific 3D Print Technology: A Case Report.

CASE: We present a 17-month-old female infant with a left lower extremity infection. After treating the infection, she developed a pathologic femur fracture malunion with a complex femoral deformity. Three-dimensional (3D) patient-specific prints of her affected and unaffected femora were made, and a corrective osteotomy was templated on the prints. CONCLUSION: By printing the contralateral proximal femur and templating the osteotomy and correction based on the native anatomy of the patient, we were able to simulate the 3D deformity correction and customize an implant to fit the patient's anatomy.

Orbital Volumetric Analysis in Patients With Unicoronal Craniosynostosis: A Comparison Between Distraction Osteogenesis and Fronto-Orbital Advancement.

BACKGROUND: Unicoronal craniosynostosis is associated with orbital restriction and asymmetry. Surgical treatment aims to both correct the aesthetic deformity and prevent the development of ocular dysfunction. We used orbital quadrant and hemispheric volumetric analysis to assess orbital restriction and compare the effectiveness of distraction osteogenesis with anterior rotational cranial flap (DO) and bilateral fronto-orbital advancement and cranial vault remodeling (FOAR) with respect to the correction of orbital restriction in patients with unicoronal craniosynostosis. METHODS: A retrospective review of all patients with a diagnosis of unicoronal craniosynostosis and treated with either DO or FOAR from 2000 to 2019 was performed. Preoperative and postoperative total orbital volumes, as well as quadrant and hemispheric volume ratios, were calculated from 3-dimensional head computed tomography scans. Selected preoperative and postoperative orbital measurements, including the maxillary length of the orbit (MLO; zygomaticofrontal suture to the top of zygomatic arch) and the sphenoid length of the orbit (SLO; the top of sphenoid suture to the top of zygomatic arch), were also obtained. RESULTS: Data were available for 28 patients with unicoronal craniosynostosis. Mean preoperative total orbital volume was significantly smaller on the synostotic side compared with the nonsynostotic side (10.94 vs 12.20 cm3, P = 0.04). Preoperative MLO and SLO were significantly longer on the synostotic side compared with the nonsynostotic side (MLO: 20.26 vs 17.75 mm, P < 0.001; SLO: 26.91 vs 24.93 mm, P = 0.01). Distraction osteogenesis and FOAR produced significantly different changes in orbital quadrant and/or hemispheric volume ratios on the nonsynostotic side but not on the synostotic side. CONCLUSIONS: Before correction, patients with unicoronal craniosynostosis have significantly smaller total orbital volumes on the synostotic side compared with the nonsynostotic side and significantly greater MLO and SLO on the synostotic side compared with the nonsynostotic side. There is no significant difference between DO and FOAR with regard to correcting the observed orbital restriction in these patients.

A guideline for 3D printing terminology in biomedical research utilizing ISO/ASTM standards.

First patented in 1986, three-dimensional (3D) printing, also known as additive manufacturing or rapid prototyping, now encompasses a variety of distinct technology types where material is deposited, joined, or solidified layer by layer to create a physical object from a digital file. As 3D printing technologies continue to evolve, and as more manuscripts describing these technologies are published in the medical literature, it is imperative that standardized terminology for 3D printing is utilized. The purpose of this manuscript is to provide recommendations for standardized lexicons for 3D printing technologies described in the medical literature. For all 3D printing methods, standard general ISO/ASTM terms for 3D printing should be utilized. Additional, non-standard terms should be included to facilitate communication and reproducibility when the ISO/ASTM terms are insufficient in describing expository details. By aligning to these guidelines, the use of uniform terms for 3D printing and the associated technologies will lead to improved clarity and reproducibility of published work which will ultimately increase the impact of publications, facilitate quality improvement, and promote the dissemination and adoption of 3D printing in the medical community.