Highly Stable Self-Cleaning Paints Based on Waste-Valorized PNC-Doped TiO2 Nanoparticles.

Adding photocatalytically active TiO2 nanoparticles (NPs) to polymeric paints is a feasible route toward self-cleaning coatings. While paint modification by TiO2-NPs may improve photoactivity, it may also cause polymer degradation and release of toxic volatile organic compounds. To counterbalance adverse effects, a synthesis method for nonmetal (P, N, and C)-doped TiO2-NPs is introduced, based purely on waste valorization. PNC-doped TiO2-NP characterization by vibrational and photoelectron spectroscopy, electron microscopy, diffraction, and thermal analysis suggests that TiO2-NPs were modified with phosphate (P=O), imine species (R=N-R), and carbon, which also hindered the anatase/rutile phase transformation, even upon 700 °C calcination. When added to water-based paints, PNC-doped TiO2-NPs achieved 96% removal of surface-adsorbed pollutants under natural sunlight or UV, paralleled by stability of the paint formulation, as confirmed by micro-Fourier transform infrared (FTIR) surface analysis. The origin of the photoinduced self-cleaning properties was rationalized by three-dimensional (3D) and synchronous photoluminescence spectroscopy, indicating that the dopants led to 7.3 times stronger inhibition of photoinduced e-/h+ recombination when compared to a benchmark P25 photocatalyst.

Adsorption of Polylactic-co-Glycolic Acid on Zinc Oxide Systems: A Computational Approach to Describe Surface Phenomena.

Zinc oxide and polylactic-co-glycolic acid (ZnO-PLGA) nanocomposites are known to exhibit different biomedical applications and antibacterial activity, which could be beneficial for adding to wound dressings after different surgeries. However, possible cytotoxic effects along with various unexpected activities could reduce the use of these prominent systems. This is correlated to the property of ZnO, which exhibits different polymeric forms, in particular, wurtzite, zinc-blende, and rocksalt. In this study, we propose a computational approach based on the density functional theory to investigate the properties of ZnO-PLGA systems in detail. First, three different stable polymorphs of ZnO were considered. Subsequently, the abilities of each system to absorb the PLGA copolymer were thoroughly investigated, taking into account the modulation of electrical, optical, and mechanical properties. Significant differences between ZnO and PLGA systems have been found; in this study, we remark on the potential use of these models and the necessity to describe crucial surface aspects that might be challenging to observe with experimental approaches but which can modulate the performance of nanocomposites.

Development of activated carbons derived from wastes: coffee grounds and olive stones as potential porous materials for air depollution.

Agro-industrial byproducts and food waste necessitate an environmentally friendly way of reducing issues related to their disposal; it is also necessary to recover as much new raw material from these resources as possible, especially when we consider their potential usage as a precursor for preparing depolluting materials, such as activated carbon. In this work, coffee grounds and olive stones were chosen as precursors and the adsorption capacity of the obtained porous carbons for volatile organic compounds (VOCs) was studied. Microporous activated carbons (ACs) were prepared using chemical (K2CO3) and physical (CO2) activation. The influence of the activation process, type, and time of activation was also investigated. Measurements of VOCs adsorption were performed, and methyl-ethyl-ketone (MEK) and toluene were chosen as the model pollutants. The surface areas and total pore volumes of 1487 m2/g and 0.53 cm3/g and 870 m2/g and 0.22 cm3/g for coffee ground carbons and olive stone carbons, respectively, were obtained via chemical activation, whereas physical activation yielded values of 716 m2/g and 0.184 cm3/g and 778 cm2 g-1 and 0.205 cm3/g, respectively. As expected, carbons without activation (biochars) showed the smallest surface area, equal to 331 m2/g and 251 m2/g, and, hence, the lowest adsorption capacity. The highest adsorption capacity of MEK (3210 mg/g) and toluene (2618 mg/g) was recorded for chemically activated coffee grounds. Additionally, from the CO2 isotherms recorded at a low pressure (0.03 bar) and 0 °C, the maximum CO2 adsorption capacity was equal to 253 mg/g.

Integration of Lipid-Functionalized Epigallocatechin-3-gallate into PLGA Matrix as a Novel Polyphenol-Based Nanoantioxidant.

The search for polyphenol-based materials with antioxidant activity is a growing research area in the biomedical field. To obtain an efficient and stable nanoantioxidant, a novel biosystem was designed by integrating a lipophilic derivative of epigallocatechin-3-gallate (named EGCG-C18) on the surface of poly(lactic-co-glycolic acid) (PLGA). Poly(vinyl alcohol) (PVA) and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-poly(ethylene glycol) (DSPE-PEG2000) were selected as polymeric and lipidic stabilizers, respectively, and their influence on both physical properties and the antioxidant activity of nanoantioxidant was investigated by a combined in silico and experimental approach. Full-atom molecular dynamics (MD) simulations were carried out to describe the different self-assembly processes of all components and the interactions that guided the EGCG-C18 insertion inside the PLGA matrix. Together with infrared spectroscopy results, the formation of an antioxidant lipid shell on the PLGA surface was clear. Dynamic light scattering and transmission electron microscopy showed that in the presence of DSPE-PEG2000, NPs were smaller than those treated with PVA. In addition, the different stabilizers used strongly influenced the ROS-scavenging ability of nanomaterials and this effect was strictly related to the molecular organization of EGCG-C18. MD showed that the apolar interaction between the alkyl chains of DSPE-PEG2000 and EGCG-C18 oriented the phenolic groups of the polyphenol toward the solvent, providing an ability of NP to scavenge hydroxyl radicals over to free EGCG-C18 and PLGA/PVA NPs. Finally, the ability of nanoantioxidants to protect human dermal fibroblasts from cell death induced by oxidative stress has been tested, revealing the high potential of these novel NPs as polyphenol-based materials.

Development of a Quartz-Based Photo-Mobile Polymer Film for Controlled Motion Triggered by Light or Heat.

We have developed a photo-mobile polymer film, that combines organic and inorganic materials, to allow for controlled motion that can be triggered by light or heat. Our film is made using recycled quartz and consists of two layers: a multi-acrylate polymer layer and a layer containing oxidized 4-amino-phenol and N-Vinyl-1-Pyrrolidinone. The use of quartz in our film also gives it a high temperature resistance of at least 350 °C. When exposed to heat, the film moves in a direction that is independent of the heat source, due to its asymmetrical design. Once the heat source is removed, the film returns to its original position. ATR-FTIR measurements confirm this asymmetrical configuration. This technology may have potential applications in energy harvesting, due to the piezoelectric properties of quartz.

Organic enrichment can increase the impact of microplastics on meiofaunal assemblages in tropical beach systems.

The cumulative impact of microplastic and organic enrichment is still largely unknown. Here, we investigated the microplastic contamination, the organic enrichment and their effects on meiofaunal distribution and diversity in two islands of the Maldivian archipelago: one more pristine, and another strongly anthropized. Field studies were coupled with manipulative experiments in which microplastic polymers were added to sediments from the non-anthropized island (i.e., without organic enrichment) to assess the relative effect of microplastic pollution on meiofauna assemblages. Our results reveal that the impact of microplastic contamination on meiofaunal abundance and taxa richness was more significant in the anthropized island, which was also characterized by a significant organic enrichment. Meiofauna exposed experimentally to microplastic contamination showed: i) the increased abundance of opportunistic nematodes and copepods and ii) a shift in the trophic structure, increasing relevance in epistrate-feeder nematodes. Based on all these results, we argue that the coexistence of chronic organic enrichment and microplastics can significantly increase the ecological impacts on meiofaunal assemblages. Since microplastic pollution in the oceans is predicted to increase in the next decades, its negative effects on benthic biodiversity and functioning of tropical ecosystems are expected to worsen especially when coupled with human-induced eutrophication. Urgent actions and management plans are needed to avoid the cumulative impact of microplastic and organic enrichment.

Transformation of industrial and organic waste into titanium doped activated carbon - cellulose nanocomposite for rapid removal of organic pollutants.

Production of cost-efficient composite materials with desired physicochemical properties from low-cost waste material is much needed to meet the growing needs of the industrial sector. As a step forward, the current study reports for the first time an effective utilization of industrial metal (inorganic) waste as well as fall leaves (organic waste), to produce three types of nanomaterials at the same time; "Titanium Doped Activated Carbon Nanostructures (Ti-ACNs)", "Nanocellulose (NCel)", and combination of both "Titanium Doped Activated Carbon Cellulose Nanocomposite (Ti-AC-Cel-NC)". X-ray diffraction (XRD), transmission electron microscopy (TEM) and microanalysis (EDXS) measurements reveal that the Ti-ACNs material is formed by Ti-nanostructures, generally poorly crystalized but in some cases forming hexagonal Ti-crystallites of 15 nm, embedded in mutated graphene clouds. Micro- Fourier transform infrared spectroscopy (micro-FTIR) confirms that the chemical structure of NCel with bond vibrations between 1035 to 2917 cm-1 remained preserved during Ti-AC-Cel-NC formation. The prepared materials (Ti-ACNs, Ti-AC-Cel-NC) have demonstrated rapid removal of organic pollutants (Crystal Violet, Methyl Violet) from wastewater through surface adsorption and photocatalysis. In the first 20 min, Ti-ACNs have adsorbed ≈87% of the organic pollutants and further photocatalyzed them up to ≈96%. When Ti-ACNs are combined with NCel, their efficiency is increased of about four times. This performance originates from the adsorption by mutated graphene-like carbon and assisted photocatalysis by Ti nanostructures as well as the good supporting capacity of NCel for the homogenous Ti-ACNs distribution.

Cytotoxic Effects of 5-Azacytidine on Primary Tumour Cells and Cancer Stem Cells from Oral Squamous Cell Carcinoma: An In Vitro FTIRM Analysis.

In the present study, the cytotoxic effects of 5-azacytidine on primary Oral Squamous Cell Carcinoma cells (OSCCs) from human biopsies, and on Cancer Stem Cells (CSCs) from the same samples, were investigated by an in vitro Fourier Transform InfraRed Microscospectroscopy (FTIRM) approach coupled with multivariate analysis. OSCC is an aggressive tumoral lesion of the epithelium, accounting for ~90% of all oral cancers. It is usually diagnosed in advanced stages, and this causes a poor prognosis with low success rates of surgical, as well as radiation and chemotherapy treatments. OSCC is frequently characterised by recurrence after chemotherapy and by the development of a refractoriness to some employed drugs, which is probably ascribable to the presence of CSCs niches, responsible for cancer growth, chemoresistance and metastasis. The spectral information from FTIRM was correlated with the outcomes of cytotoxicity tests and image-based cytometry, and specific spectral signatures attributable to 5-azacytidine treatment were identified, allowing us to hypothesise the demethylation of DNA and, hence, an increase in the transcriptional activity, together with a conformational transition of DNA, and a triggering of cell death by an apoptosis mechanism. Moreover, a different mechanism of action between OSSC and CSC cells was highlighted, probably due to possible differences between OSCCs and CSCs response.

Antioxidant Activity Level, Bioactive Compounds, Colour and Spectroscopic Analysis (UV-Vis and FT-IR) of Flavoured Drinks Made with Wine and Sour Cherries (Prunuscerasus Var. austera).

In recent years, the increase in consumer interest towards simpler and authentic lifestyles has led to an explosive growth in the production and business of typical agri-food products and, among these, of wines and its derived beverages. With the aim of promoting a typical Italian beverage, the so-called "Vino di visciole" or "Visner", listed in the national table of traditional agri-food products, the antioxidant and colour properties of fifteen samples from different provinces of the Marche region and obtained with different recipes were analysed. The "in vitro" total antioxidant activity (TAA) determined using ABTS assays, total phenolic content (TPC), total flavonoid content (TFC), total anthocyanins content (TAC), and colour (Somers assay) were measured. In addition, a spectroscopic FT-IR and UV-Vis analysis was carried out to analyse samples with multivariate techniques. The results showed that the production area, the recipe, and the type of cherries used to make the alcoholic beverage do not influence the antioxidant properties and the phytochemical contents of the samples. The multivariate treatment of the spectroscopic features (mainly UV-Vis) rather allowed the differentiation of samples with high antioxidant activity using easy and low-cost instrumental techniques that require little time and can be employed in routine analysis.

Exploiting fourier transform infrared and Raman microspectroscopies on cancer stem cells from oral squamous cells carcinoma: new evidence of acquired cisplatin chemoresistance.

Oral Squamous Cells Carcinoma (OSCC) is characterised by the risk of recurrence and the onset of a refractoriness response to chemotherapy drugs. These phenomena have been recently related to a subpopulation of Cancer Stem Cells (CSCs), which have either an innate or acquired drug resistance, triggered by chemotherapy treatments. In this light, to precisely target chemotherapy regimens, it is essential to improve knowledge on CSCs, with a particular focus on their molecular features. In this work, a subpopulation of CSCs, isolated by tumour sphere formation from primary OSCC cells, were treated with cisplatin for 16, 24 and 48 hours and analysed by infrared absorption and Raman microspectroscopies. CSC spectral data were compared with those obtained in previous work, for primary OSCC cells treated under the same conditions. Routine viability/apoptosis cell-based assays evidenced in CSCs and primary OSCCs, a similar degree of sensitivity to the drug at 24 hours, while a reversion of the conventional monotonic time response exhibited by OSCCs was shown by CSCs at 48 hours. This peculiar time response was also supported by the analysis of IR and Raman data, which pinpointed alterations in the lipid composition and DNA conformation in CSCs. The results obtained suggest that CSCs, although sharing with OSCC cells a similar sensitivity to cisplatin, display the onset of a mechanism of chemoresistance and enrichment of resistant CSCs as a result of drug treatment, shedding new light on the severe issue of refractoriness of some patients to chemotherapy conventionally used for OSCC.

Comparison of two curing protocols during adhesive cementation: can the step luting technique supersede the traditional one?

This study aims to compare the degree of conversion of two different curing protocols used during adhesive cementation. The following resin luting agents were tested: Hri Flow (MF) and pre-heated Hri Micerium (MH); light-cure Nexus Third Generation (NX3L) and dual-cure Nexus Third Generation (NX3D); dual cured RelyX Ultimate (RXU) and light-cure RelyX Veneers (RXL). For each tested material, ten samples were prepared and divided into two groups which had different curing protocols (P1 and P2): in P1, samples were cured for 40 s; in P2, samples were cured for 5 s, and then, after 20 s, cured again for additional 40 s. The degree of conversion (DC) was evaluated both during the first 5 min of the curing phase and after 1, 2, 7, 14 and 28 days (p = 0.05). Different trends were observed in DC values after 5 min by comparing P1 and P2. In both P1 and P2, DC decreased as follows, MH > MF > NX3L > RXL > RXU > NX3D. There were significant differences of DC values among all resin luting agents (p < 0.05) in P1, while no significant differences existed between MH and MF, and NX3L and RXL in P2. At 1, 2, 7, 14 and 28 days the light curing luting agents had a higher DC than the dual luting agents (p < 0.05). P1 and P2 were not statistically different at each time point (p > 0.05). Both P1 and P2 protocols let achieve an acceptable DC after 28 days. The tested P2 can be safely used to lute indirect restorations, simplifying the removal of cement excesses.

Microplastics in real wastewater treatment schemes: Comparative assessment and relevant inhibition effects on anaerobic processes.

The occurrence, fate and removal of microplastics (MPs) in a wastewater treatment plant (WWTP) in Central Italy were investigated together with their potential adverse effects on anaerobic processes. In the influent of the WWTP, 3.6 MPs.L-1 were detected that mostly comprised polyester fibers and particles in the shape of films, ranging 0.1-0.5 mm and made of polyethylene and polypropylene (PP). The full-scale conventional activated sludge scheme removed 86% of MPs, with the main reduction in the primary and secondary settling. MPs particles bigger than 1 mm were not detected in the final effluent and some loss of polymers types were observed. In comparison, the pilot-scale upflow granular anaerobic sludge blanket (UASB) + anaerobic membrane bioreactor (AnMBR) configuration achieved 94% MPs removal with the abatement of 87% of fibers and 100% of particles. The results highlighted an accumulation phenomenon of MPs in the sludge and suggested the need to further investigate the effects of MPs on anaerobic processes. Accordingly, PP-MPs at concentrations from 5 PP-MPs.gTS-1 to 50 PP-MPs.gTS-1 were spiked in the pilot-scale UASB reactor that was fed with real municipal wastewater, where up to 58% decrease in methanogenic activity was observed at the exposure of 50 PP-MPs.gTS-1. To the best of our knowledge, the presented results are the first to report of PP-MPs inhibition on anaerobic processes.

How Can Different Polishing Timing Influence Methacrylate and Dimethacrylate Bulk Fill Composites? Evaluation of Chemical and Physical Properties.

The polishing procedure is commonly performed after direct composite restorations, and little information exists regarding the right timing during which it should be performed on bulk fill composites. This study investigated the effect of polishing timing on the degree of conversion (DC), Vickers microhardness (VMH), and surface morphology of a methacrylate- (MET-) and dimethacrylate- (DMET-) based bulk fill composite, by using FT-NIR, microhardness tester, and SEM. Composite samples were divided as follows: in Group I (immediate), samples were polished immediately after curing (t 0); in Group D (delayed), samples were polished after 24 h from curing (t 24), whereas the unpolished samples were considered as controls (Group C). The DC and VMH values were evaluated before and after polishing, at t 0 and t 24. Statistical analysis was performed with a significance level set at p < 0.05. At t 0, DC increased after polishing in both tested composites (p < 0.05), while at t 24, Group I and Group D were not different. By considering VMH, in the case of MET, all groups were not different both at t 0 and t 24. On the other hand, at t 0, VMH values of DMET increased after polishing. At t 24, DMET Group I and DMET Group D were not different. Qualitative evaluations of scanning electron micrographs showed that the surface morphology of MET presented a more irregular aspect than the DMET one. In summary, since the immediate polishing of MET can improve the DC, without negatively affecting VMH, but showing an irregular surface, it is suggested to wait 24 hours before proceeding with polishing. Otherwise, for DMET, the immediate polishing could definitively be recommended, since it improves both DC and VMH, also producing a regular surface. Therefore, clinicians may always safely polish a restoration performed using DMET-based bulk fill composites in one-chair appointment, avoiding a second appointment.

Investigation of human pancreatic cancer tissues by Fourier Transform Infrared Hyperspectral Imaging.

Fourier-transform infrared hyperspectral imaging (FTIR-HSI) provides hyperspectral images containing both morphological and chemical information. It is widely applied in the biomedical field to detect tumor lesions, even at the early stage, by identifying specific spectral biomarkers. Pancreatic neoplasms present different prognoses and are not always easily classified by conventional analyses. In this study, tissue samples with diagnosis of pancreatic ductal adenocarcinoma and pancreatic neuroendocrine tumor were analyzed by FTIR-HSI and the spectral data compared with those from healthy and dysplastic samples. Multivariate/univariate approaches were complemented to hyperspectral images, and definite spectral markers of the different lesions identified. The malignant lesions were recognizable both from healthy/dysplastic pancreatic tissues (high values of phospholipids and triglycerides with shorter, more branched and less unsaturated alkyl chains) and between each other (different amounts of total lipids, phosphates and carbohydrates). These findings highlight different metabolic pathways characterizing the different samples, well detectable by FTIR-HSI.

In vitro FTIR microspectroscopy analysis of primary oral squamous carcinoma cells treated with cisplatin and 5-fluorouracil: a new spectroscopic approach for studying the drug-cell interaction.

In the present study, human primary oral squamous carcinoma cells treated with cisplatin and 5-fluorouracil were analyzed, for the first time, by in vitro FTIR Microspectroscopy (FTIRM), to improve the knowledge on the biochemical pathways activated by these two chemotherapy drugs. To date, most of the studies regarding FTIRM cellular analysis have been executed on fixed cells from immortalized cell lines. FTIRM analysis performed on primary tumor cells under controlled hydrated conditions provides more reliable information on the biochemical processes occurring in in vivo tumor cells. This spectroscopic analysis allows to get on the same sample and at the same time an overview of the composition and structure of the most remarkable cellular components. In vitro FTIRM analysis of primary oral squamous carcinoma cells evidenced a time-dependent drug-specific cellular response, also including apoptosis triggering. Furthermore, the univariate and multivariate analyses of IR data evidenced meaningful spectroscopic differences ascribable to alterations affecting cellular proteins, lipids and nucleic acids. These findings suggest for the two drugs different pathways and extents of cellular damage, not provided by conventional cell-based assays (MTT assay and image-based cytometry).

Rearing Zebrafish on Black Soldier Fly (Hermetia illucens): Biometric, Histological, Spectroscopic, Biochemical, and Molecular Implications.

A desirable goal of the aquaculture sector is to replace most of fish meal and fish oil with more sustainable, cost-effective, and environmental friendly ingredients ensuring fish health and welfare standards. Due to minimal environmental impact, compared with most conventional feed commodities, insects deserve a growing attention as candidate ingredients for aquafeeds. The present study investigated, for the first time, the possible application of a 100% insect diet in zebrafish larval rearing. Through a multidisciplinary approach, the major biological responses of fish to the new diets were assessed. Results of biometry, fatty acid composition, expression of genes involved in fish growth, stress response, lipid metabolism, chitinolytic activity, gut inflammation, and liver macromolecular composition suggested a possible application of insect larvae for zebrafish larval rearing. However, further studies are necessary to better understand the use of this insect species in the rearing of fish.

Vibrational mapping of sinonasal lesions by Fourier transform infrared imaging spectroscopy.

Fourier transform infrared imaging (FTIRI) is a powerful tool for analyzing biochemical changes in tumoral tissues. The head and neck region is characterized by a great variety of lesions, with different degrees of malignancy, which are often difficult to diagnose. Schneiderian papillomas are sinonasal benign neoplasms arising from the Schneiderian mucosa; they can evolve into malignant tumoral lesions (squamous cell carcinoma). In addition, they can sometimes be confused with the more common inflammatory polyps. Therefore, an early and definitive diagnosis of this pathology is mandatory. Progressing in our research on the study of oral cavity lesions, 15 sections consisting of inflammatory sinonasal polyps, benign Schneiderian papillomas, and sinonasal undifferentiated carcinomas were analyzed using FTIRI. To allow a rigorous description of these pathologies and to gain objective diagnosis, the epithelial layer and the adjacent connective tissue of each section were separately investigated by following a multivariate analysis approach. According to the nature of the lesion, interesting modifications were detected in the average spectra of the different tissue components, above all in the lipid and protein patterns. Specific band-area ratios acting as spectral markers of the different pathologies were also highlighted.

FTIR microspectroscopic characterization of Spitz nevi.

In the last 10 years, few efforts have been carried out to apply vibrational spectroscopy in the study of dermal pathologies in order to characterize the most relevant spectral markers for distinguishing benign from cancerous lesions. Spitz nevi are a special group of benign melanocytic lesions, characterized by spindled and/or epithelioid nevomelanocytes, with peculiar clinical, dermoscopic and histopathological features. The "atypical forms" of Spitz nevi are among the commonest problems of differential diagnosis with the so-called "spitzoid melanomas". The clinical and histological criteria for discriminating these two entities are very subtle and often still quite subjective, and, in a significant percentage of cases, can lead to diagnostic pitfalls and inadequate therapies. Therefore, it is noteworthy to outline that the diagnosis of melanocytic lesions still represents a challenging problem and a continue matter of discussion. We exploited FTIR microspectroscopy to study the different kinds of spitzoid melanocytes, in order to define the most relevant spectral markers of each specimen and to achieve objective information on "borderline" histologically atypical lesions. In particular, the spectroscopic investigation was carried out on melanocytes deriving from normal skin (as a normal control), malignant melanoma and Spitz nevi. The presence of the characteristic bands of melanin was investigated, too.

A new approach to evaluate aging effects on human oocytes: Fourier transform infrared imaging spectroscopy study.

OBJECTIVE: To characterize from a vibrational point of view the alterations caused by aging on human oocytes. DESIGN: Reproductive biology. SETTING: Private assisted reproductive technology clinic, synchrotron beam line, and university infrared laboratory. PATIENT(S): Twenty women of different ages (30 ± 2 and 39 ± 2 years) selected on the basis of detailed inclusion criteria and submitted to controlled ovarian stimulation according to a specific protocol. INTERVENTION(S): Collection of 68 supernumerary oocytes that were not used during the IVF cycle from the above cited consenting patients. MAIN OUTCOME MEASURE(S): Focal Plane Array Fourier transform infrared (FTIR) analysis of human oocytes. RESULT(S): Specific spectral differences were highlighted in the two experimental groups of oocytes. In particular, in oocytes of 39-year-old women, the occurrence of peroxidative processes and a decrease in the amount of carbohydrates were observed, together with alterations in the phospholipid membrane, proteic pattern, and nucleic acids content. CONCLUSION(S): For the first time, FTIR spectroscopy was applied to human oocytes, leading to strong evidence of damage from aging in the gametes of mature women, which could be related to a decline in reproductive function. All the information obtained may be considered useful to improve the scientific knowledge on human reproduction and to exploit new strategies for detecting oocyte aging.

Vibrational spectroscopy as a supporting technique in clinical diagnosis and prognosis of atherosclerotic carotid plaques: a review.

There is an imperative need to distinguish stable from unstable and vulnerable plaques because of the occurrence of thrombosis following rupture of the plaque. Imaging techniques, invasive and noninvasive, are used routinely for the assessment of visualization and quantification of this pathology, even if invasive techniques cannot be applied in the screening of atherosclerotic plaques and noninvasive imaging has low reproducibility. The aim of this review was to verify the suitability and the advantages of using vibrational spectroscopy in the study of human atherosclerotic plaques. The utilization of validated vibrational techniques in clinical trials may be of great importance for the ability to diagnose the early onset of a disease, rapidly, noninvasively and unambiguously. These techniques, by using a worldwide accepted protocol in spectral investigation of bioclinical changes in the human body, have been successfully applied to assess vulnerable plaques in ex vivo and in vivo models, constituting a potentially useful support to classical clinical imaging techniques. It is conceivable that this fingerprinting approach, with further clinical validation, is ready to be developed for use and at the disposal of commercial and easy-to-use spectrometers, equipped with catheter-based systems for the in vivo imaging of atherosclerosis plaques.