Effect of denture adhesives on masticatory performance: Multicenter randomized controlled trial.

PURPOSE: The purpose of this study is to investigate the effects of denture adhesives on masticatory performance via a 10-center, parallel, randomized, controlled trial of complete denture wearers in Japan. METHODS: The trial was conducted between September 2013 and October 2016. The inclusion criteria were complete edentulism, willingness to undergo new complete denture treatment, and willingness to return for recall treatment. The exclusion criteria were age 90 years or older, presence of severe systemic illness, inability to understand the questionnaires, wearing metal base complete dentures, denture adhesive user, wearing prosthetics for maxillofacial defects, wearing complete dentures with tissue conditioners, and severe xerostomia. Randomization of the powder-type denture adhesive (powder), cream-type denture adhesive (cream), and control (saline) groups was performed using a sealed envelope system. Masticatory performance was measured using color-changeable chewing gum. Intervention blinding was not feasible. RESULTS: Sixty-seven control, 69 powder, and 64 cream participants are analyzed using the intention-to-treat principle. The participants in all groups show significantly improved masticatory performance at post-intervention (paired t-test with Bonferroni correction P < 0.0001). However, no significant difference in masticatory performance is detected among the three groups (one-way analysis of variance). A significant negative correlation between pre- and post-changes in masticatory performance and intraoral condition scores is observed (Pearson's correlation coefficient, P < 0.0001). CONCLUSIONS: Although denture adhesives improved the masticatory performance of complete denture wearers, their clinical effects are comparable to those of saline solution. The use of denture adhesives is more effective in complete denture wearers with unsatisfactory intraoral conditions.

Effects of Diabetes and Voluntary Exercise on IgA Concentration and Polymeric Immunoglobulin Receptor Expression in the Submandibular Gland of Rats.

Background and Objectives: Patients with diabetes are more susceptible to upper respiratory tract infections (URTIs) because they are easily infected. Salivary IgA (sali-IgA) levels play a major role in transmitting URTIs. Sali-IgA levels are determined by salivary gland IgA production and polymeric immunoglobulin receptor (poly-IgR) expression. However, it is unknown whether salivary gland IgA production and poly-IgR expression are decreased in patients with diabetes. While exercise is reported to increase or decrease the sali-IgA levels, it is unclear how exercise affects the salivary glands of patients with diabetes. This study aimed to determine the effects of diabetes and voluntary exercise on IgA production and poly-IgR expression in the salivary glands of diabetic rats. Materials and Methods: Ten spontaneously diabetic Otsuka Long-Evans Tokushima Fatty (OLETF) rats (eight-week-old) were divided into two groups of five rats each: a non-exercise group (OLETF-C) and a voluntary wheel-running group (OLETF-E). Five Long-Evans Tokushima Otsuka (LETO) rats without diabetes were bred under the same conditions as the OLETF-C. Sixteen weeks after the study began, the submandibular glands (SGs) were collected and analyzed for IgA and poly-IgR expression levels. Results: IgA concentrations and poly-IgR expression levels in SGs were lower in OLETF-C and OLETF-E than in LETO (p < 0.05). These values did not differ between the OLETF-C and OLETF-E. Conclusions: Diabetes decreases IgA production and poly-IgR expression in the salivary glands of rats. Moreover, voluntary exercise increases sali-IgA levels but does not increase IgA production and poly-IgR expression in the salivary glands of diabetic rats. Increasing IgA production and poly-IgR expression in the salivary glands, which is reduced in diabetes, might require slightly higher-intensity exercise than voluntary exercise under the supervision of a doctor.

Effects of denture adhesives on denture retention and occlusal forces in complete denture wearers: A multicenter, randomized controlled trial.

PURPOSE: This study aimed to determine the effects of denture adhesives on denture retention and occlusal force in complete denture wearers in a multicenter, randomized, parallel-group controlled trial. METHODS: Two hundred edentulous patients wearing complete dentures were allocated to three groups: powder-type denture adhesive, cream-type denture adhesive, and control (saline solution). Denture adhesives and saline solution were applied to the dentures for 4 days. The retentive force of the dentures and occlusal force were measured using a force transducer occlusal force meter at baseline and after 4 days of intervention. In addition to between-group comparisons, subgroup analyses of denture retention and occlusal force were performed based on the level of difficulty of the edentulism treatment. The levels were ranked as I (easy), II, III, and IV (difficult). RESULTS: Cream-type denture adhesives significantly improved the retentive force of the dentures (P<0.01) and occlusal force (P<0.05), with no significant differences between baseline and post-intervention forces in the powder-type denture adhesive and control groups. In within-group comparisons, cream-type denture adhesives improved both the retentive and occlusal forces at Level II (P<0.05), and powder-type denture adhesives improved the occlusal force at Level II (P<0.01). CONCLUSIONS: Application of cream-type denture adhesives effectively improves the denture retention and occlusal force in complete denture wearers with a moderate degree of difficulty during edentulism treatment.

Prolonged Post-Polymerization Biocompatibility of Polymethylmethacrylate-Tri-n-Butylborane (PMMA-TBB) Bone Cement.

Polymethylmethacrylate (PMMA)-based acrylic bone cement is commonly used to fix bone and metallic implants in orthopedic procedures. The polymerization initiator tri-n-butylborane (TBB) has been reported to significantly reduce the cytotoxicity of PMMA-based bone cement compared to benzoyl peroxide (BPO). However, it is unknown whether this benefit is temporary or long-lasting, which is important to establish given that bone cement is expected to remain in situ permanently. Here, we compared the biocompatibility of PMMA-TBB and PMMA-BPO bone cements over several days. Rat femur-derived osteoblasts were seeded onto two commercially-available PMMA-BPO bone cements and experimental PMMA-TBB polymerized for one day, three days, or seven days. Significantly more cells attached to PMMA-TBB bone cement during the initial stages of culture than on both PMMA-BPO cements, regardless of the age of the materials. Proliferative activity and differentiation markers including alkaline phosphatase production, calcium deposition, and osteogenic gene expression were consistently and considerably higher in cells grown on PMMA-TBB than on PMMA-BPO, regardless of cement age. Although osteoblastic phenotypes were more favorable on older specimens for all three cement types, biocompatibility increased between three-day-old and seven-day-old PMMA-BPO specimens, and between one-day-old and three-day-old PMMA-TBB specimens. PMMA-BPO materials produced more free radicals than PMMA-TBB regardless of the age of the material. These data suggest that PMMA-TBB maintains superior biocompatibility over PMMA-BPO bone cements over prolonged periods of at least seven days post-polymerization. This superior biocompatibility can be ascribed to both low baseline cytotoxicity and a further rapid reduction in cytotoxicity, representing a new biological advantage of PMMA-TBB as a novel bone cement material.

Multivariate analysis reveals oral health-related quality of life of complete denture wearers with denture adhesives: a multicenter randomized controlled trial.

Purpose To investigate the difference in improvement of oral health-related quality of life (OHR-QoL) depending on the oral and denture conditions of a complete denture wearer when using a cream or powder type denture adhesive in a 10-center parallel randomized clinical trial.Methods Two hundred edentulous subjects who wore complete dentures were allocated to each of the three groups according to denture adhesive type: cream, powder, and control (saline solution). The materials were applied to the mucosal surface of the dentures for 4 days, and baseline data and data after the intervention were collected. OHR-QoL was assessed using the Japanese version of the modified Oral Health Impact Profile for Edentulous Patients (OHIP-EDENT-J) scale for outcome. Multivariate analysis was used to investigate improvements in OHR-QoL according to participant characteristics among complete denture wearers using these materials.Results OHIP-EDENT-J scores were significantly decreased in all groups after the intervention (p < 0.05); however, there were no statistically significant differences among the groups. Multiple logistic regression analysis revealed a significant association between the vertical height of the maxillary and mandibular alveolar ridge and OHIP-EDENT-J scores in the cream-type denture adhesive group. In contrast, there were no significant association between participant characteristics and OHIP-EDENT-J scores in the powder-type adhesive and control groups.Conclusions The use of denture adhesives could improve OHR-QoL for complete denture wearers. The cream-type denture adhesives may be expected to improve OHR-QoL in patients with poor residual ridge conditions compared with patients with good residual ridge conditions.

The Effect of TBB, as an Initiator, on the Biological Compatibility of PMMA/MMA Bone Cement.

Acrylic bone cement is widely used in orthopedic surgery for treating various conditions of the bone and joints. Bone cement consists of methyl methacrylate (MMA), polymethyl methacrylate (PMMA), and benzoyl peroxide (BPO), functioning as a liquid monomer, solid phase, and polymerization initiator, respectively. However, cell and tissue toxicity caused by bone cement has been a concern. This study aimed to determine the effect of tri-n-butyl borane (TBB) as an initiator on the biocompatibility of bone cement. Rat spine bone marrow-derived osteoblasts were cultured on two commercially available PMMA-BPO bone cements and a PMMA-TBB experimental material. After a 24-h incubation, more cells survived on PMMA-TBB than on PMMA-BPO. Cytomorphometry showed that the area of cell spread was greater on PMMA-TBB than on PMMA-BPO. Analysis of alkaline phosphatase activity, gene expression, and matrix mineralization showed that the osteoblastic differentiation was substantially advanced on the PMMA-TBB. Electron spin resonance (ESR) spectroscopy revealed that polymerization radical production within the PMMA-TBB was 1/15-1/20 of that within the PMMA-BPO. Thus, the use of TBB as an initiator, improved the biocompatibility and physicochemical properties of the PMMA-based material.

Redox injectable gel protects osteoblastic function against oxidative stress and suppresses alveolar bone loss in a rat peri-implantitis model.

Dental implant surgery is a routine treatment in clinical dentistry. However, implant surgery is associated with an increased risk of bacterially induced peri-implantitis and the production of reactive oxygen species (ROS), with no established treatment. We recently designed a new redox injectable gel (RIG) containing nitroxide radicals for the treatment of peri-implantitis. Here, we investigated the antioxidative effect of RIG as a preventive therapy for ROS-associated peri-implantitis in a rat model of alveolar bone resorption and in vitro. In each rat, the maxillary first molar tooth was replaced with a screw-type implant, and rats were assigned to one of four groups: an implant alone, an implant with infection, implant with infection and treatment with nRIG (a non-nitroxide radical-containing injectable hydrogel) or RIG. We confirmed the long-term retention of RIG in the peri-implant region and found that RIG significantly protected the alveolar bone volume and decreased lipid peroxidation. In culture, we found that RIG restored osteoblast proliferation and differentiation in the presence of hydrogen peroxide (H2O2)-induced oxidative stress. Moreover, using a malondialdehyde assay of lipid peroxidation, we found that RIG suppressed oxidative stress in H2O2-treated rat osteoblasts. Overall, RIG is anticipated as a prophylactic treatment for peri-implantitis and may help preserve oral function. Statement of Significance 1. Implant surgery is associated with an increased risk of bacterially induced peri-implantitis and the production of reactive oxygen species (ROS). We designed a novel redox injectable gel (RIG) containing nitroxide radicals for the treatment of peri-implantitis. In this study, we investigated the antioxidative effect of RIG as a preventive therapy for ROS-associated peri-implantitis in a rat model and in vitro. 2. We showed that treatment with RIG reduces oxidative damage in a rat peri-implantitis model, protecting against bone resorption and a loss of bone density. We showed that RIG inhibits H2O2-mediated decreases in proliferation, osteoblast differentiation, and mineralization, and also against lipid peroxidation in vitro. Our results indicate that RIG has an antioxidative effect of peri-implantitis.

Novel Osteogenic Behaviors around Hydrophilic and Radical-Free 4-META/MMA-TBB: Implications of an Osseointegrating Bone Cement.

Poly(methyl methacrylate) (PMMA)-based bone cement, which is widely used to affix orthopedic metallic implants, is considered bio-tolerant but lacks osteoconductivity and is cytotoxic. Implant loosening and toxic complications are significant and recognized problems. Here we devised two strategies to improve PMMA-based bone cement: (1) adding 4-methacryloyloxylethyl trimellitate anhydride (4-META) to MMA monomer to render it hydrophilic; and (2) using tri-n-butyl borane (TBB) as a polymerization initiator instead of benzoyl peroxide (BPO) to reduce free radical production. Rat bone marrow-derived osteoblasts were cultured on PMMA-BPO, common bone cement ingredients, and 4-META/MMA-TBB, newly formulated ingredients. After 24 h of incubation, more cells survived on 4-META/MMA-TBB than on PMMA-BPO. The mineralized area was 20-times greater on 4-META/MMA-TBB than PMMA-BPO at the later culture stage and was accompanied by upregulated osteogenic gene expression. The strength of bone-to-cement integration in rat femurs was 4- and 7-times greater for 4-META/MMA-TBB than PMMA-BPO during early- and late-stage healing, respectively. MicroCT and histomorphometric analyses revealed contact osteogenesis exclusively around 4-META/MMA-TBB, with minimal soft tissue interposition. Hydrophilicity of 4-META/MMA-TBB was sustained for 24 h, particularly under wet conditions, whereas PMMA-BPO was hydrophobic immediately after mixing and was unaffected by time or condition. Electron spin resonance (ESR) spectroscopy revealed that the free radical production for 4-META/MMA-TBB was 1/10 to 1/20 that of PMMA-BPO within 24 h, and the substantial difference persisted for at least 10 days. The compromised ability of PMMA-BPO in recruiting cells was substantially alleviated by adding free radical-scavenging amino-acid N-acetyl cysteine (NAC) into the material, whereas adding NAC did not affect the ability of 4-META/MMA-TBB. These results suggest that 4-META/MMA-TBB shows significantly reduced cytotoxicity compared to PMMA-BPO and induces osteoconductivity due to uniquely created hydrophilic and radical-free interface. Further pre-clinical and clinical validations are warranted.

Effect of denture adhesives on oral moisture: A multicenter randomized controlled trial.

PURPOSE: The purpose of this study was to investigate the effect of denture adhesives on oral moisture in a 10-center parallel randomized clinical trial. METHODS: Two hundred edentulous subjects wearing complete dentures were allocated into three groups: cream-type adhesive, powder-type adhesive and control groups. The adhesives (and saline solution in the control group) were applied to the mucosal surface of the dentures for 4 days, and baseline data and data after the intervention for eight meals over 4 days were obtained. For the main outcome, oral moisture was measured with a moisture checking device. Secondary outcomes were denture satisfaction, masticatory performance, denture retention, and occlusal force. In addition to between-group and within-group comparisons of oral moisture, investigations for secondary outcomes were undertaken in subgroups classified according to the degree of oral moisture at baseline (normal subgroup and dry mouth subgroup). Intention-to-treat analysis was also performed. RESULTS: Between-group and within-group comparisons of oral moisture showed no significant differences. The cream-type and powder-type denture adhesives were significantly effective in the dry mouth group for denture satisfaction ratings of ability to masticate, stability, retention, and comfort of mandibular dentures (p<0.05). The masticatory performance and retentive force of the dry mouth denture adhesive using groups were significantly improved after intervention (p<0.05). CONCLUSIONS: The oral moisture of complete denture wearers was not influenced by the use of denture adhesives. Our findings showed that denture adhesives improved subjective denture satisfaction, masticatory performance, and retention for complete denture patients with oral dryness.

Low-Intensity Pulsed Ultrasound Prevents Development of Bisphosphonate-Related Osteonecrosis of the Jaw-Like Pathophysiology in a Rat Model.

We developed a rat model of bisphosphonate-related osteonecrosis of the jaw (BRONJ) by removing a maxillary molar tooth (M1) from ovariectomized rats after treatment with alendronate. To mimic periodontitis, some of the rats were administered Porphyromonas gingivalis (p. gingivalis) at the M1 site every 2 to 3 d for 2 wk. Rats pretreated with alendronate plus p. gingivalis showed delayed healing of socket epithelia, periosteal reaction of alveolar bone formation and lower bone mineral density in the alveolus above adjacent M2 teeth. These abnormalities were prevented by tooth socket exposure to 20 min/d low-intensity pulsed ultrasound (LIPUS), which restored diminished expression of RANKL, Bcl-2, IL-6, Hsp70, NF-κB and TNF-α messenger ribonucleic acids in remote bone marrow, suggesting LIPUS prevented development of BRONJ-like pathophysiology in rat by inducing systemic responses for regeneration, in addition to accelerating local healing. Non-invasive treatment by LIPUS, as well as low-level laser therapy, may be useful for medication-related osteonecrosis of the jaw patients.

Effect of masticatory stimulation on the quantity and quality of saliva and the salivary metabolomic profile.

BACKGROUND: This study characterized the changes in quality and quantity of saliva, and changes in the salivary metabolomic profile, to understand the effects of masticatory stimulation. METHODS: Stimulated and unstimulated saliva samples were collected from 55 subjects and salivary hydrophilic metabolites were comprehensively quantified using capillary electrophoresis-time-of-flight mass spectrometry. RESULTS: In total, 137 metabolites were identified and quantified. The concentrations of 44 metabolites in stimulated saliva were significantly higher than those in unstimulated saliva. Pathway analysis identified the upregulation of the urea cycle and synthesis and degradation pathways of glycine, serine, cysteine and threonine in stimulated saliva. A principal component analysis revealed that the effect of masticatory stimulation on salivary metabolomic profiles was less dependent on sample population sex, age, and smoking. The concentrations of only 1 metabolite in unstimulated saliva, and of 3 metabolites stimulated saliva, showed significant correlation with salivary secretion volume, indicating that the salivary metabolomic profile and salivary secretion volume were independent factors. CONCLUSIONS: Masticatory stimulation affected not only salivary secretion volume, but also metabolite concentration patterns. A low correlation between the secretion volume and these patterns supports the conclusion that the salivary metabolomic profile may be a new indicator to characterize masticatory stimulation.

Study protocol for a multi-center, randomized controlled trial to develop Japanese denture adhesive guidelines for patients with complete dentures: the Denture Adhesive Guideline trial: study protocol for a randomized controlled trial.

BACKGROUND: Denture adhesives, characterized as medical products in 1935 by the American Dental Association, have been considered useful adjuncts for improving denture retention and stability. However, many dentists in Japan are hesitant to acknowledge denture adhesives in daily practice because of the stereotype that dentures should be inherently stable, without the aid of adhesives. The aim of this study is to verify the efficacy of denture adhesives to establish guidelines for Japanese users. The null hypothesis is that the application of denture adhesives, including the cream and powder types, or a control (isotonic sodium chloride solution) would not produce different outcomes nor would they differentially improve the set outcomes between baseline and day 4 post-application. METHODS: This ten-center, randomized controlled trial with parallel groups is ongoing. Three hundred edentulous patients with complete dentures will be allocated to three groups (cream-type adhesive, powder-type adhesive, and control groups). The participants will wear their dentures with the denture adhesive for 4 days, including during eight meals (three breakfasts, two lunches, and three dinners). The baseline measurements and final measurements for the denture adhesives will be performed on the first day and after breakfast on the fourth day. The primary outcome is a general satisfaction rating for the denture. The secondary outcomes are denture satisfaction ratings for various denture functions, occlusal bite force, resistance to dislodgement, masticatory performance, perceived chewing ability, and oral health-related quality of life. Between-subjects comparisons among the three groups and within-subjects comparisons of the pre- and post-intervention measurements will be performed. Furthermore, a multiple regression analysis will be performed. The main analyses will be based on the intention-to-treat principle. A sample size of 100 subjects per group, including an assumed dropout rate of 10 %, will be required to achieve 80 % power with a 5 % alpha level. DISCUSSION: This randomized clinical trial will provide information about denture adhesives to complete denture wearers, prosthodontic educators, and dentists in Japan. We believe this new evidence on denture adhesive use from Japan will aid dentists in their daily practice even in other countries. TRIAL REGISTRATION: ClinicalTrials.gov NCT01712802 . Registered on 17 October 2012.

13. Effect of Low-Intensity Pulsed Ultrasound (LIPUS) on Remote Bone Marrow in Rats With Healing Socket.

OBJECTIVE: We reported at the previous annual meeting that LIPUS treatment of the molar tooth sockets of retired breeder rats accelerated alveolar bone healing, and that associated humoral effects were seen with elevated blood flow. Namely, LIPUS induced VEGF/angiogenesis along with elevated baseline blood flow rate, which was further associated with a sudden depression of blood flow rate in the socket immediately after cessation of LIPUS treatment. Prior injection with EP4 PGE2 receptor antagonist, but not EP3 antagonist, abolished this LIPUS-induced depression, and topical application of PGE2 to the socket epithelium mimicked the LIPUS-induced depression. In fact, the serum level of PGE2 increased after LIPUS treatment, and significantly increased in the blood flow rate at remote sites on the foot dorsum and tail after 20 minutes. Therefore, in the current study, we examined the tibia bone marrow, which is likely to respond to circulating PGE2. METHODS: Right maxillary first molars were removed from retired female breeder rats in both the LIPUS and the control groups. LIPUS was applied extrabuccally to the socket every 24 hours for 2 weeks starting one day after extraction. Removed bone samples were fixed with 4% formaldehyde to prepare undecalcified frozen sections using Kawamoto's method for immunohistochemical or histochemical staining. Bone marrow samples dissected from the tibia were treated with RNAlater (Ambion) for later RT-PCR analysis. RESULTS AND DISCUSSION: Chemokine receptor CXCR4-positive bone marrow cells increased in the tibia of the LIPUS-treated rat. Together with ubiquitously expressed CXCL12(SDF-1), it is suggested that PGE2 released from the exposed socket is responsible for the recruitment, proliferation and mobilization of the precursors of bone forming cells. LIPUS is thought to exert humoral effects by recruiting bone marrow cells into the healing socket along with VEGF/angiogenesis induced by PGE2.

UV photofunctionalization promotes nano-biomimetic apatite deposition on titanium.

BACKGROUND: Although biomimetic apatite coating is a promising way to provide titanium with osteoconductivity, the efficiency and quality of deposition is often poor. Most titanium implants have microscale surface morphology, and an addition of nanoscale features while preserving the micromorphology may provide further biological benefit. Here, we examined the effect of ultraviolet (UV) light treatment of titanium, or photofunctionalization, on the efficacy of biomimetic apatite deposition on titanium and its biological capability. METHODS AND RESULTS: Micro-roughed titanium disks were prepared by acid-etching with sulfuric acid. Micro-roughened disks with or without photofunctionalization (20-minute exposure to UV light) were immersed in simulated body fluid (SBF) for 1 or 5 days. Photofunctionalized titanium disks were superhydrophilic and did not form surface air bubbles when immersed in SBF, whereas non-photofunctionalized disks were hydrophobic and largely covered with air bubbles during immersion. An apatite-related signal was observed by X-ray diffraction on photofunctionalized titanium after 1 day of SBF immersion, which was equivalent to the one observed after 5 days of immersion of control titanium. Scanning electron microscopy revealed nodular apatite deposition in the valleys and at the inclines of micro-roughened structures without affecting the existing micro-configuration. Micro-roughened titanium and apatite-deposited titanium surfaces had similar roughness values. The attachment, spreading, settling, proliferation, and alkaline phosphate activity of bone marrow-derived osteoblasts were promoted on apatite-coated titanium with photofunctionalization. CONCLUSION: UV-photofunctionalization of titanium enabled faster deposition of nanoscale biomimetic apatite, resulting in the improved biological capability compared to the similarly prepared apatite-deposited titanium without photofunctionalization. Photofunctionalization-assisted biomimetic apatite deposition may be a novel method to effectively enhance micro-roughened titanium surfaces without altering their microscale morphology.

Novel antioxidative nanotherapeutics in a rat periodontitis model: Reactive oxygen species scavenging by redox injectable gel suppresses alveolar bone resorption.

The excessive production of reactive oxygen species (ROS) has been implicated in a variety of disorders, but to date, ROS scavengers have not been widely used for local treatment of inflammation, because they are rapidly eliminated from the inflamed site. We have designed a novel redox injectable gel (RIG) that is formed at 37 °C after disintegration of nano-assembled flower micelles allowing nitroxide radicals to act locally as specific ROS scavengers for the treatment of periodontitis. In the present study, we have confirmed retention of the RIG in the periodontal region, along with its antioxidant-related anti-inflammatory effects, and we have subsequently evaluated the inhibitory effect of the RIG against Porphyromonas gingivalis (P. gingivalis)-induced alveolar bone loss attributed to ROS. Alveolar bone loss was estimated by morphometry, gingival blood flow was measured using laser Doppler flowmetry, and osteoclast differentiation was evaluated by tartrate-resistant acid phosphatase staining. The results show that the RIG can inhibit P. gingivalis-induced bone loss by antioxidant-related anti-inflammatory actions, and this suggests that the RIG is a promising novel therapeutic agent for the treatment of P. gingivalis-induced periodontitis.

Biocompatibility of 4-META/MMA-TBB resin used as a dental luting agent.

STATEMENT OF PROBLEM: The bonding and biological properties of currently used luting/cementing materials need to be improved. 4-Acryloyloxyethyl trimellitate anhydride/methyl methacrylate-tri-n-butylborane (4-META/MMA-TBB) resin is primarily used for splinting mobile teeth or treating fractured teeth. It undergoes moisture-resistant polymerization and bonds strongly to dentin and metals. PURPOSE: The purpose of this in vitro study was to compare the biological and biochemical properties META/MMA-TBB resin with those of conventional polymethyl methacrylate (PMMA)-MMA resin and other currently used luting materials in order to determine whether it may be a viable dental luting agent. MATERIAL AND METHODS: The degree of polymerization of 4-META/MMA-TBB resin, PMMA-MMA autopolymerizing resin, 10-methacryloyloxydecyl dihydrogen phosphate-dimethacrylate (MDP-DMA) adhesive resin, and a glass ionomer cement was measured by Fourier-transformed infrared spectroscopy. Free radical production during setting was evaluated by electron spin resonance (ESR) spectroscopy. Rat dental pulp cells cultured on these materials were examined for cell viability, attachment, proliferation, and functional phenotype. RESULTS: The degree of polymerization of 4-META/MMA-TBB resin was 82% thirty minutes after preparation, compared to 66% for PMMA-MMA autopolymerizing resin. ESR spectroscopy revealed free radical production from 4-META/MMA-TBB resin and glass ionomer cement was equivalent 24 hours after preparation, with no spike in radical generation observed. In contrast, free radical production from PMMA-MMA and MDP-DMA adhesive resins was rapid and sustained and 10 to 20 times greater than that from 4-META/MMA-TBB. The percentage of viable dental pulp cells 24 hours after seeding was considerably higher on MDP-DMA and 4-META/MMA-TBB resin than on glass ionomer cement. Cell number, proliferation, and alkaline phosphatase activity were highest on 4-META/MMA-TBB resin and lowest on the glass ionomer cement. CONCLUSIONS: 4-META/MMA-TBB resin is at least as biocompatible, and perhaps even more biocompatible, than other current luting materials, with fast, favorable, and nontoxic polymerization properties. Further in vivo and human studies of 4-META/MMA-TBB resin as a dental luting agent are warranted.

ESR investigation of ROS generated by H2O2 bleaching with TiO2 coated HAp.

It is well known that clinical bleaching can be achieved with a solution of 30% hydrogen peroxide (H2O2) or H2O2/titanium dioxide (TiO2) combination. This study examined the hypothesis that TiO2 coated with hydroxyapatite (HAp-TiO2) can generate reactive oxygen species (ROS). ROS are generated via photocatalysis using electron spin resonance (ESR). The bleaching properties of HAp-TiO2 in the presence of H2O2 can be measured using hematoporphyrin litmus paper and extracted teeth. We demonstrate that superoxides (O2(•-)) and hydroxyl radicals (HO(•)) can be generated through excitation of anatase TiO2, rutile TiO2, anatase HAp-TiO2, and rutile HAp-TiO2 in the presence of H2O2. The combination of R HAp-TiO2 with H2O2 produced the highest level of HO(•) generation and the most marked bleaching effects of all the samples. The superior bleaching effects exhibited by R HAp-TiO2 with H2O2 suggest that this combination may lead to novel methods for the clinical application of bleaching treatments.

Randomized controlled trial investigating the effect of an acrylic-based resilient liner on perceived chewing ability in edentulous patients wearing mandibular complete dentures.

PURPOSE: The aim of this study was to investigate the effect of an acrylic-based resilient liner (ARL) on perceived chewing ability in patients using mandibular complete dentures compared with that of patients using mandibular complete dentures with a conventional acrylic resin (CAR). MATERIALS AND METHODS: This randomized controlled trial was conducted at two centers from April 2004 to July 2006. Seventy-four subjects were randomly allocated to either the ARL or CAR group using a random permuted block method after obtaining written informed consent. A valid questionnaire listing 35 foods was used to evaluate the subjects' perceived chewing ability of each item, assessed according to the following scale: 0=cannot eat, 1=can eat with difficulty, and 2=can eat easily. If subjects did not eat the food because they disliked it or had not eaten it since first wearing dentures, they filled in a triangle or square, respectively. These figures were treated as a 0 during analysis. RESULTS: No significant differences were observed between the ARL and CAR groups. The perceived chewing ability of subjects with new complete dentures was significantly higher than that of those with their old complete dentures. The duration of edentulism was positively associated with perceived chewing ability. CONCLUSIONS: An ARL applied to mandibular complete dentures has no significant impact on the perceived chewing ability of edentulous patients in comparison to a CAR.