Correlation of local lightning activity with extra low frequency detector for Schumann Resonance measurements.

A dedicated extremely low frequency (ELF) detector has been constructed and used successfully for Schumann Resonance (SRs) measurements in N.W. Greece. The main objective of this work was to investigate the effect of local lightning activity on the signal of our ELF detector and consequently on the estimated SRs parameters, namely the power, the frequency and the quality factor of each mode. Therefore, several measurements were taken into account for the ELF signal continuously recorded and the lightning intensity in a specific range around the ELF detector. Additionally, a simple filtering technique was used, in order to reject the distorted SRs spectra. The statistical analysis performed showed a positive and statistically significant correlation between the lightning events and the recorded magnetic component of the ELF signal. It was found that local lightnings have a significant impact on the SRs measurements, and it is necessary to be removed from the background signal.

Study of the variations in the Schumann resonances parameters measured in a southern Mediterranean environment.

Schumann resonances (SRs) provide a unique tool for exploring continuous and long-term monitoring of global environmental parameters, although their detection and study is a very complex task. This paper presents diurnal and seasonal variations of principal parameters, namely the resonance frequency, the Q-factor, and the power of SRs, in the North-South (NS) magnetic field component for the first five modes from Extra Low Frequency (ELF) measurements. These were acquired at the observation site located at Doliana, Kalpaki, in the Region of Epirus, North West Greece. These variations are the first ones reported for the principal parameters in the South Eastern Mediterranean area and correspond to the one-year measurement period from 2016 to 2017. The comparison with variations at several observations sites is also discussed. Moreover, correlation with global lighting centers, as well as local lightning activity, and SRs parameters variation is attempted.

Clinical Accuracy of 3D-Planned Maxillary Positioning Using CAD/CAM-Generated Splints in Combination With Temporary Mandibular Fixation in Bimaxillary Orthognathic Surgery.

STUDY DESIGN: The aim of this study was to evaluate the accuracy of 3-dimensional (3D)-planned maxillary positioning by using computer-assisted design (CAD)/computer-assisted manufacturing (CAM) splints combined with temporary mandibular fixation in bimaxillary orthognathic surgery. In orthognathic surgery, customized splints work sufficiently well to transfer preoperative planning into the operation site for transverse und sagittal positioning of the maxilla. The vertical positioning is more difficult due to the non-fixed mandibular reference. Therefore, the combined use of CAD/CAM splints and temporary mandibular fixation to the zygomatic region was applied for transferring the 3D-planned maxillary position into the operation site from 2012 until 2015 in our hospital. OBJECTIVE: In addition to the general accuracy, the precision should therefore be checked especially in the vertical plane compared to axial and sagittal plane. METHODS: In this retrospective study, we calculated the deviation of 5 occlusal landmarks of the maxilla in 35 consecutive patients by fusing preoperative 3D planning images and postoperative computed tomography scans after bimaxillary surgery. RESULTS: The overall median deviation of maxillary positioning between plan and surgical result was 0.99 mm. The accuracy of left-right positioning was median 0.96 mm. Anterior-posterior positioning of the maxilla showed a median accuracy of 0.94 mm. Just slightly higher values were determined for the upward-downward positioning (median 1.06 mm). CONCLUSIONS: This demonstrates the predictability of maxillary positioning by using CAD/CAM splints in combination with temporary mandibular fixation in all 3 axes.

Custom wave-shaped CAD/CAM orbital wall implants for the management of post-enucleation socket syndrome.

The satisfactory management of post-enucleation socket syndrome is a major challenge. In addition to enophthalmos and hypophthalmos, the appearance of the supratarsal fold is frequently unsatisfactory. Using a combination of orbital volume reduction by means of custom wave-shaped CAD/CAM implants (1), the implantation of a dermis-fat graft (2), and the fitting of an acrylic eye prothesis (3), an algorithm has been developed that has led to considerable long-term improvements. 10 patients have already been treated by this method. The most important step is the reduction of orbital volume by means of custom wave-shaped CAD/CAM implants. These move the intraorbital soft tissue in an anterior and cranial direction. This considerably reduces the required volume of additional dermis-fat grafts, which are always subject to resorption. The use of an acrylic eye prothesis facilitates the aesthetic and functional correction of this condition and exerts less pressure on the lower eyelid due to its low weight. The method presented here leads to stable and aesthetically pleasing results with a minimum risk of complications. One problem is the exact predictability of the necessary orbital volume reduction by the custom wave-shaped CAD/CAM implants. Further studies and a larger number of cases are required to address this problem.

Intratumoral gene therapy versus intravenous gene therapy for distant metastasis control with 2-diethylaminoethyl-dextran methyl methacrylate copolymer non-viral vector-p53.

Lung cancer still remains to be challenged by novel treatment modalities. Novel locally targeted routes of administration are a methodology to enhance treatment and reduce side effects. Intratumoral gene therapy is a method for local treatment and could be used either in early-stage lung cancer before surgery or at advanced stages as palliative care. Novel non-viral vectors are also in demand for efficient gene transfection to target local cancer tissue and at the same time protect the normal tissue. In the current study, C57BL/6 mice were divided into three groups: (a) control, (b) intravenous and (c) intatumoral gene therapy. The novel 2-Diethylaminoethyl-Dextran Methyl Methacrylate Copolymer Non-Viral Vector (Ryujyu Science Corporation) was conjugated with plasmid pSicop53 from the company Addgene for the first time. The aim of the study was to evaluate the safety and efficacy of targeted gene therapy in a Lewis lung cancer model. Indeed, although the pharmacokinetics of the different administration modalities differs, the intratumoral administration presented increased survival and decreased distant metastasis. Intratumoral gene therapy could be considered as an efficient local therapy for lung cancer.

Incidentally discovered white subcupsular liver nodules during laparoscopic surgery: biliary hamartoma and peribiliary gland hamartoma.

During routine laparoscopic surgery, the surgeon may encounter the presence of small white subcapsular liver nodules, either solitary or multiple. The lesions may mimic liver metastasis and in many cases are not demonstrated in the preoperative ultrasound or computed tomography. The aim of this article is to familiarize the laparoscopic surgeon with the incidental discovery of these nodules which represent the two types of intrahepatic benign bile duct proliferations and include biliary hamartomas, which are usually multiple benign malformations of the intrahepatic bile ducts, and peribiliary gland hamartoma, which is usually solitary and consists of a benign epithelial tumor of the liver derived from bile duct cells.