Design, synthesis, and evaluation of a pyrazole-based corrosion inhibitor: a computational and experimental study.

By employing a synergistic blend of experimental and theoretical methodologies, we investigated the corrosion inhibition efficacy of a synthesized pyrazole derivative (BM-01) in a solution of hydrochloric acid (1 M). We utilized molecular dynamics (MD) simulations, scanning electron microscopy (SEM), density functional theory (DFT), complexation, plus electrochemical impedance spectroscopy (EIS). We conducted weight loss (WL) measurements from 298 to 328 K. Inhibition efficacy reached a maximum at a BM-01 concentration of 10-3 M, achieving 90.0% (EIS), 90.40% (WL), and 90.38% (potentiodynamic polarization (PDP)). SEM unveiled the shielding of the carbon-steel surface from acid-induced damage by BM-01. The Langmuir adsorption isotherm exhibited a robust fit with a low sum of squares, standard deviation, and a high correlation coefficient. PDP findings indicated that BM-01 acted as a mixed-type inhibitor, predominantly favoring the cathodic process, suggesting potential corrosion-mitigation properties. Theoretical analyses involving DFT, MD simulations, and radial distribution function were conducted to postulate a mechanism and identify an inhibitory layer. Theoretical outcomes aligned closely with experimental data, thereby reinforcing the validity of our findings.

Effect of altitude and harvest year on nutraceutical characteristics of Rubus ellipticus fruits.

Rubus ellipticus Smith is an evergreen shrub in the Rosaceae family, commonly known as yellow Himalayan raspberry. The objective of this study is to determine the morphological analysis, minerals, proximate, ascorbic acid, anthocyanins, and carotenoids content in R. ellipticus fruits. The fruit samples were collected from four different sites with different altitudes [500 m (District Bilaspur), 1,000 m (District Hamirpur), 1,500 m (District Solan) and 2,000 m (District Shimla)] of Himachal Pradesh for the two consecutive years (2018 and 2019). The fruit morphological investigation revealed that the maximum length (7.71 ± 0.08 mm), width (8.71 ± 0.03 mm), and weight (0.80 ± 0.01 g) of fruits is achieved at higher altitudes (2,000 m) in the year 2018 as compared to 2019. The mineral content (0.05-36.6 mg/g DW), ascorbic acid content (14.59-23.64 mg/g DW), proteins (95.20-131 mg/g DW), and crude fibers (5.6-11.5%) were also higher in fruits grown at 2,000 m altitude, whereas carbohydrates (210-398 mg/g DW), crude fat (2.4-4.1%), and anthocyanins (0.42-1.35 mg/100 g FW) contents were higher in fruits collected from 500 m altitude. According to the results, R. ellipticus fruits were rich in crude fiber, moisture, carbohydrates, protein, ash, and crude fat, as well as in micronutrients, and displayed significant variation with altitude in nutrient content. This could be due to the different environmental, geographical, and weather conditions. The high nutrient content of R. ellipticus suggests its future potential applications for the food and pharmaceutical industry.

An ordered mesoporous carbon-silica hybrid for the detection of the antiviral drug ribavirin in clinical samples.

Ribavirin (RIB) is widely used for the treatment of viral diseases such as herpes, hepatitis C, and Lassa fever. Moreover, to control the spread of COVID-19, the consumption of antiviral medicines, including RIB, has increased significantly worldwide. By combining ordered mesoporous carbon with silica nanoparticles via ultrasound, we synthesized silica/ordered mesoporous carbon (SiO2-OMC) hybrid composites that show excellent electrochemical performance. The hybrid composite was found to contain spherical SiO2 nanoparticles having diameters ranging from 21 to 29 nm. A sensor comprising a carbon paste electrode and SiO2-OMC (SiO2-OMC/CPE) facilitated the ultrasensitive and selective detection of RIB at an oxidation potential of 0.71 V, having a linear range of 0.1-40 µmol L-1, limit of detection of 0.067 µmol L-1, and sensitivity of 1.969 µA µmol-1 L. Furthermore, the results indicate that charge transfer at the interface of the SiO2-OMC hybrid results in a synergistic effect compared to OMC and SiO2 alone. The advantages include the potential for regenerating the sensor surface, rapid and facile production, and suitability for the detection of RIB in capsule, human plasma, and urine samples, making SiO2-OMC/CPE a promising interface for bioelectrochemical applications.

MEDT analysis of mechanism and selectivities in non-catalyzed and lewis acid-catalyzed diels-alder reactions between R-carvone and isoprene.

Within the context of Molecular Electronic Density Theory (MEDT), this study investigates the Diels-Alder reaction among isoprene (2) and R-carvone (1R) applying DFT simulations, with and without Lewis acid (LA) catalysis. The results show that carvone (1R) acts as an electrophile and isoprene (2) as a nucleophile in a polar process. LA catalysis increases the electrophilicity of carvone, thereby improving the reactivity and selectivity of the reaction by reducing the activation Gibbs free energy. Parr functions reveal that the C5=C6 double bond is more reactive than the C9=C10 double bond, indicating chemoselectivity. The examination of the Electron Localization Function (ELF) reveals high regio- and stereoselectivity, indicating an asynchronous mechanism for the LA-catalyzed DA reaction. Furthermore, it is suggested that cycloadduct 3 has great anti-HIV potential because it exhibits lower binding energies than azidothymidine (AZT) in the docking studies of cycloadducts 3 and 4 amongst a primary HIV-1protein (1A8O plus 5W4Q).

Anti-inflammatory effects of thymol: an emphasis on the molecular interactions through in vivo approach and molecular dynamic simulations.

Thymol (THY), as the natural monoterpene phenol, acts against oxidative stress and inflammatory processes. This study aimed to evaluate the anti-inflammatory effects and possible molecular mechanisms of THY via formalin-induced mouse and egg albumin-induced chick models alongside molecular docking and molecular dynamic (MD) simulations. THY (7.5, 15, and 30 mg/kg) was investigated, compared to celecoxib and ketoprofen (42 mg/kg), as anti-inflammatory standards. THY dose-dependently and significantly (p < 0.05) decreased paw-licking and edema diameter parameters in formalin (phases I and II) and egg albumin-induced models. Moreover, THY (15 mg/kg) exerted better anti-inflammatory effects in combination with the standard drug ketoprofen than alone and with celecoxib. In silico studies demonstrated elevated binding affinities of THY with cyclooxygenase-2 (COX-2) than the COX-1 enzyme, and the ligand binds at a similar location where ketoprofen and celecoxib interact. The results of MD simulations confirmed the stability of the test ligand. THY exerted anti-inflammatory effects on Swiss mice and young chicks, possibly by interacting with COX-2. As a conclusion, THY might be a hopeful drug candidate for the management of inflammatory disorders.

Anti-inflammatory activity of d-pinitol possibly through inhibiting COX-2 enzyme: in vivo and in silico studies.

Introduction: D-pinitol, a naturally occurring inositol, has diverse biological activities like antioxidant, antimicrobial and anticancer activities. This study aimed to evaluate anti-inflammatory effect of d-pinitol in a chick model. Additionally, in silico studies were performed to evaluate the molecular interactions with cyclooxygenase-2 (COX-2). Methods: The tested groups received d-pinitol (12.5, 25, and 50 mg/kg) and the standard drugs celecoxib and ketoprofen (42 mg/kg) via oral gavage prior to formalin injection. Then, the number of licks was counted for the first 10 min, and the paw edema diameter was measured at 60, 90, and 120 min. Results and Discussion: The d-pinitol groups significantly (p < 0.05) reduced the number of paw licks and paw edema diameters, compared to negative control. When d-pinitol was combined with celecoxib, it reduced inflammatory parameters more effectively than the individual groups. The in silico study showed a promising binding capacity of d-pinitol with COX-2. Taken together, d-pinitol exerted anti-inflammatory effects in a dose-dependent manner, possibly through COX-2 interaction pathway.

Noninvasive cardiac-specific biomarkers for the diagnosis and prevention of vascular stenosis in cardiovascular disorder.

Background: The most frequent lesion in the blood vessels feeding the myocardium is vascular stenosis, a condition that develops slowly but can prove to be deadly in a long run. Non-invasive biomarkers could play a significant role in timely diagnosis, detection and management for vascular stenosis events associated with cardiovascular disorders. Aims: The study aimed to investigate high sensitivity troponin I (hs-TnI), cardiac troponin I (c-TnI) and high sensitivity C-reactive protein (hs-CRP) that may be used solely or in combination in detecting the extent of vascular stenosis in CVD patients. Methodology: 274 patients with dyspnea/orthopnea complaints visiting the cardiologists were enrolled in this study. Angiographic study was conducted on the enrolled patients to examine the extent of stenosis in the five prominent vessels (LDA, LCX, PDA/PLV, RCA, and OM) connected to the myocardium. Samples from all the cases suspected to be having coronary artery stenosis were collected, and subjected to biochemical evaluation of certain cardiac inflammatory biomarkers (c-TnI, hsTn-I and hs-CRP) to check their sensitivity with the level of vascular stenosis. The extent of mild and culprit stenosis was detected during angiographic examination and the same was reported in the form significant (≥50% stenosis in the vessels) and non-significant (<50% stenosis in the vessels) Carotid Stenosis. Ethical Clearance for the study was provided by Dr. Ram Manohar Lohia Institute of Medical Sciences Institutional Ethical Committee. Informed consent was obtained from all the participants enrolled in the study. Results: We observed that 85% of the total population enrolled in this study was suffering from hypertension followed by 62.40% detected with sporadic episodes of chest pain. Most of the subjects (42% of the total population) had stenosis in their LAD followed by 38% who had stenosis in their RCA. Almost 23% patients were reported to have stenosis in their LCX followed by OM (18% patients), PDA/PLV (13%) and only 10% patients had blockage problem in their diagonal. 24% of the subjects were found to have stenosis in a single vessel and hence were categorized in the Single Vessel Disease (SVD) group while 76% were having stenosis in two or more than two arteries (Multiple Vessel Disease). hs-TnI level was found to be correlated with the levels of stenosis and was higher in the MVD group as compared to the SVD group. Conclusion: hs-TnI could be used as a novel marker as it shows prominence in detecting the level of stenosis quite earlier as compared to c-TnI which gets detected only after a long duration in the CVD patients admitted for angiography. hs- CRP gets readily detected as inflammation marker in these patients and hence could be used in combination with hs-TnI to detect the risk of developing coronary artery disease.

Synthesis, Characterization, and Antimicrobial Evaluation of Schiff Base-mixed Ligand Complexes with Divalent Metal Ions Derived from Amoxicillin and Vanillin/Nicotinamide.

INTRODUCTION: This study focuses on the development of novel antimicrobial agents. A Schiff base ligand, 6-(2-(4-hydroxy-3-methoxybenzylideneamino)-2-(4-hydroxyphenyl)acetamido)-3,3-dimethyl-7-oxo- 4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, synthesized through the condensation of amoxicillin and vanillin in methanol, served as the foundation. Polydentate mixed ligand complexes were then formed by reacting the Schiff base with metal ions (Fe(II), Co(II), Ni(II), Cu(II), and Zn(II)) and nicotinamide in specific ratios. METHODS: Characterization involved various techniques, such as 1H-NMR, FT-IR, UV-Vis, and elemental analysis for the ligand, and Atomic Absorption, FT-IR, UV-Vis, magnetic susceptibility, and conductance measurements for the Schiff base-metal ion complexes. RESULTS: Quantum chemical features of both ligands and metal complexes were computed, refining their electronic and molecular structures theoretically. Antimicrobial activity against Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae, Salmonella typhi, Acinetobacter baumannii, and Pseudomonas aeruginosa was assessed for the starting materials, ligands, and synthesized complexes, revealing significant effects on certain species. In-silico binding modes with Escherichia coli (PDB ID: 5iq9) were determined through molecular docking. CONCLUSION: This study underscores the potential applications of the Schiff base ligands and their metal complexes in developing new antimicrobial agents.

Carbon nanotubes: a novel innovation as food supplements and biosensing for food safety.

Recently, nanotechnology has emerged as an extensively growing field. Several important fabricated products including Carbon nanotubes (CNTs) are of great importance and hold significance in several industrial sectors, mainly food industry. Recent developments have come up with methodologies for the prevention of health complications like lack of adequate nutrition in our diet. This review delves deeper into the details of the food supplementation techniques and how CNTs function in this regard. This review includes the challenges in using CNTs for food applications and their future prospects in the industry. Food shortage has become a global issue and limiting food resources put an additional burden on the farmers for growing crops. Apart from quantity, quality should also be taken into consideration and new ways should be developed for increasing nutritional value of food items. Food supplementation has several complications due to the biologically active compounds and reaction in the in vivo environment, CNTs can play a crucial role in countering this problem through the supplementation of food by various processes including; nanoencapsulation and nanobiofortification thus stimulating crop growth and seed germination rates. CNTs also hold a key position in biosensing and diagnostic application for either the quality control of the food supplements or the detection of contagions like toxins, chemicals, dyes, pesticides, pathogens, additives, and preservatives. Detection such pathogens can help in attaining global food security goal and better production and provision of food resources. The data used in the current review was collected up to date as of March 31, 2024 and contains the best of our knowledge. Data collection was performed from various reliable and authentic literatures comprising PubMed database, Springer Link, Scopus, Wiley Online, Web of Science, ScienceDirect, and Google Scholar. Research related to commercially available CNTs has been added for the readers seeking additional information on the use of CNTs in various economic sectors.

Phytochemical analysis and biological investigation of Cheilanthes tenuifolia (Burm.f.) Swartz.

Introduction: Cheilanthes tenuifolia is an evergreen ornamental small fern, belonging to the family Pteridaceae, that grows in warm and rocky regions worldwide. Many species of Cheilanthes genus are evidently endowed with important phytochemicals and bioactivities. This study aimed to perform a preliminary phytochemical analysis of Cheilanthes tenuifolia leaves alongside an evaluation of free radical scavenging, anti-inflammatory, antimicrobial, and clot lysis activities of extract fractions. Materials and methods: A preliminary phytochemical analysis was done after fractionation of ethanolic extract (ECT) with n-hexane (HCT) and chloroform (CCT). Then, 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, egg albumin and RBC membrane stabilization tests, disc diffusion, and human blood clot lysis assays were performed. Results: Phytochemical investigations suggested that the plant is rich in alkaloids, glycosides, tannins, and flavonoids. All obtained fractions exhibited concentration-dependent radical scavenging, inhibition of egg protein denaturation and RBC membrane lysis capacities. Except for antifungal tests, ECT exhibited better DPPH radical scavenging, anti-inflammatory, antibacterial, and clot lysis capacities than HCT and CCT fractions. However, all fractions exhibited a mild anti-inflammatory activity. Conclusion: C. tenuifolia might be a good source of antioxidant, anti-microbial, and anti-atherothrombotic agents. Further studies are required to isolate and characterize the active principles liable for each bioactivity, along with possible molecular interactions.

Dual Applications of Cobalt-Oxide-Grafted Carbon Quantum Dot Nanocomposite for Two Electrode Asymmetric Supercapacitors and Photocatalytic Behavior.

Carbon materials, such as graphene, carbon nanotubes, and quantum-dot-doped metal oxides, are highly attractive for energy storage and environmental applications. This is due to their large surface area and efficient optical and electrochemical activity. In this particular study, a composite material of cobalt oxide and carbon quantum dots (Co3O4-CQD) was prepared using cobalt nitrate and ascorbic acid (carbon source) through a simple one-pot hydrothermal method. The properties of the composite material, including the functional groups, composition, surface area, and surface morphology, were evaluated by using various methods such as ultraviolet, Fourier transform infrared, X-ray diffraction, Raman, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller, scanning electron microscopy, and transmission electron microscopy analysis. The electrochemical performance of the Co3O4-CQD composite has been studied using a three-electrode system. The results show that at 1 A g-1, the composite delivers a higher capacitance of 1209 F g-1. The asymmetric supercapacitor (Co3O4-CQD//AC) provided 13.88 W h kg-1 energy and 684.65 W kg-1 power density with a 96% capacitance retention. The Co3O4-CQD composite also demonstrated excellent photocatalytic activity (90% in 60 min) for the degradation of methylene blue dye under UV irradiation, which is higher than that of pristine Co3O4 and CQD. This demonstrates that the Co3O4-CQD composite is a promising material for commercial energy storage and environmental applications.

Construction of a binder-free PANI-CQD-Cu electrode via an electrochemical method for flexible supercapacitor applications.

In recent years, flexible hybrid supercapacitors (FSCs) have played a significant role in energy storage applications owing to their superior flexibility and electrochemical properties. In this study, carbon quantum dots (CQDs) were prepared from ascorbic acid via a hydrothermal method and physical and chemical characterizations were performed. Then, the carbon quantum dots (CQDs) were doped with polyaniline (PANI) and copper (Cu) to form a PANI-CQD-Cu composite coated on carbon cloth (CC) using an electropolymerization method. In the polymerization process, CQDs bind with the PANI chain and form a PANI-CQD-Cu composite. The prepared electrode's functional group and surface morphology were characterized through XRD, Raman, BET, XPS and SEM with EDAX studies. The electrochemical properties of the PANI-CQD-Cu electrode were investigated using cyclic voltammetry, impedance spectroscopy and galvanostatic charge-discharge study. The capacitance value of PANI-CQD-Cu was 1070 mF cm-2 at 5 mA cm-2 (1070 F g-1 at 1 A g-1), which was higher than that of PANI (775 mF cm-2). Moreover, a flexible asymmetric supercapacitor (FASC) based on an activated carbon/PVA-H2SO4/PANI-CQD-Cu device was fabricated, which exhibited outstanding energy and power densities of 23.10 µW h cm-2 and 0.978 mW cm-2, respectively. The capacitance value remained at 92% after 3000 cycles. The outcome results indicated that the PANI-CQD-Cu-coated CC electrode material can be a promising electrode material for practical energy storage applications.

Design and Exploration by Quantum Chemical Analysis of Photosensitizers Having [D-π-π-A]- and [D-D-triad-A]-Type Molecular Structure Models for DSSC.

Density functional theory (DFT) calculations are performed on the newly developed and designed photosensitizers having [D-D-triad-A]- and [D-π-π-A]-type structural models for near-infrared absorption dye-sensitized solar cells (DSSCs). For this purpose, three novel molecules are designed, which are named as follows: [naphthalene-anthracene-thiophene-furan-benzonitrile] as dye S1, [coronene-anthracene-thiophene-furan-benzonitrile] as dye S2, and [fluorene-thiophene-furan-benzonitrile] as dye S3. In all three systems, benzonitrile is the acceptor moiety, while thiophene and furan are bridging moieties. Naphthalene and anthracene are donor moieties in S1, whereas coronene and anthracene are donor moieties in S2, and fluorene is the only single donor moiety used for designing the dye complex S3. All three dye complexes are optimized under the DFT framework by using the B3LYP hybrid functional with 6-31G(d,p) basis set on Gaussian 16W software. The absorption spectra are calculated utilizing time-dependent density functional theory (TD-DFT) with the CAM-B3LYP/6-31G(d,p) basis set. The calculated absorption maxima of S1 and S2 are 749.45 and 750.04 nm, respectively, while for S3, it is reported to be at 337.35 nm, which suggests that the designed molecular structure having a double-donor moiety is suitable for high absorption wavelength. Further, the analysis of frontier molecular orbital energy gap suggests that the molecular systems S1, S2, and S3 have values 2.17, 2.13, and 3.618 eV, respectively, which lie in the semiconducting region. The other parameters calculated for the photovoltaic performance are exciton binding energy, change in free energy of charge regeneration, change in free energy of charge injection, oscillator strength, light harvesting efficiency, and open-circuit voltage.

Ionic Covalent Organic Framework as a Dual Functional Sensor for Temperature and Humidity.

Visual sensing of humidity and temperature by solids plays an important role in the everyday life and in industrial processes. Due to their hydrophobic nature, most covalent organic framework (COF) sensors often exhibit poor optical response when exposed to moisture. To overcome this challenge, the optical response is set out to improve, to moisture by incorporating H-bonding ionic functionalities into the COF network. A highly sensitive COF, consisting of guanidinium and diformylpyridine linkers (TG-DFP), capable of detecting changes in temperature and moisture content is fabricated. The hydrophilic nature of the framework enables enhanced water uptake, allowing the trapped water molecules to form a large number of hydrogen bonds. Despite the presence of non-emissive building blocks, the H-bonds restrict internal bond rotation within the COF, leading to reversible fluorescence and solid-state optical hydrochromism in response to relative humidity and temperature.

Evaluation of the Immunosafety of Cucurbit[n]uril In Vivo.

Cucurbiturils are a family of macrocyclic oligomers capable of forming host-guest complexes with various molecules. Due to noncovalent binding to drug molecules and low toxicity, cucurbiturils has been extensively investigated as potential carriers for drug delivery. However, the immune system's interactions with different drug carriers, including cucurbiturils, are still under investigation. In this study, we focused on cucurbiturils' immunosafety and immunomodulation properties in vivo. We measured blood counts and lymphocyte subpopulations in blood, spleen, and bone marrow, and assessed the in vivo toxicity to spleen and bone marrow cells after intraperitoneal administration to BALB/c mice. When assessing the effect of cucurbit[6]uril on blood parameters after three intraperitoneal injections within a week in laboratory animals, a decrease in white blood cells was found in mice after injections of cucurbit[6]util, but the observed decrease in the number of white blood cells was within the normal range. At the same time, cucurbit[7]uril and cucurbit[8]uril did not affect the leukocyte counts of mice after three injections. Changes in the number of platelets, erythrocytes, and monocytes, as well as in several other indicators, such as hematocrit or erythrocyte volumetric dispersion, were not detected. We show that cucurbiturils do not have immunotoxicity in vivo, with the exception of a cytotoxic effect on spleen cells after сucurbit[7]uril administration at a high dosage. We also evaluated the effect of cucurbiturils on cellular and humoral immune responses. We founded that cucurbiturils in high concentrations affect the immune system in vivo, and the action of various cucurbiturils differs in different homologues, which is apparently associated with different interactions in the internal environment of the body.

Separation of mercuric ions using 2-thienylbenzimidazole/cucurbit[7]uril/iron-oxide nanoparticles by pH control.

2-Thienylbenzimidazole (TBI)/cucurbit[7]uril (CB7) host-guest complex was used as a motif to significantly improve the turnover of γ-Fe3O4 magnetic nanoparticles for potential application in the separation of toxic mercuric ions in polluted water samples. The mechanism of restoring the original solid materials is based on applying the pH-controlled preferential binding of the CB7 host to the TBI guest. The analytical application of this concept has not been realized in the literature. The pH-controlled stimuli-responsive abilities were confirmed in aqueous solution by the three-order of magnitudes higher stability constant of the protonated TBIH+/CB7 complex (e.g., K = 4.8 × 108 M-1) when compared to neutral TBI/CB7 complex (e.g., K = 2.4 × 105 M-1), also manifested in an increase in pKa values by ~ 3.3 units in the ground state. The supramolecular interaction and adsorption on iron oxide nanoparticles (NPs) were also spectroscopically confirmed in the solid state. The excited-state lifetime values of TBI/CB7NPs increased upon lowering the pH values (e.g., from 0.6 to 1.3 ns) with a concomitant blue shift of ~ 25 nm because of polarity effects. The time-resolved photoluminescent behaviors of the final solids in the presence of CB7 ensured pH-driven reusable systems for capturing toxic mercuric ions. The study offers a unique approach for the controllable separation of mercury ions using an external magnet and in response to pH through preferential binding of the host to guest molecules on the top of magnetic surfaces.

Light-driven self-assembly of spiropyran-functionalized covalent organic framework.

Controlling the number of molecular switches and their relative positioning within porous materials is critical to their functionality and properties. The proximity of many molecular switches to one another can hinder or completely suppress their response. Herein, a synthetic strategy involving mixed linkers is used to control the distribution of spiropyran-functionalized linkers in a covalent organic framework (COF). The COF contains a spiropyran in each pore which exhibits excellent reversible photoswitching behavior to its merocyanine form in the solid state in response to UV/Vis light. The spiro-COF possesses an urchin-shaped morphology and exhibits a morphological transition to 2D nanosheets and vesicles in solution upon UV light irradiation. The merocyanine-equipped COFs are extremely stable and possess a more ordered structure with enhanced photoluminescence. This approach to modulating structural isomerization in the solid state is used to develop inkless printing media, while the photomediated polarity change is used for water harvesting applications.

Cucurbituril-assisted sensitive fluorescence detection and quantitation of naproxen drug in wastewater samples: Guest-host characterization and HPLC investigation.

Sensitive spectrofluorometric and liquid chromatography with fluorescence detection methods have been developed for detection and determination of naproxen drug in the presence of cucurbit7uril (CB7). Fluorescence signals have been improved with the addition of CB7 to the drug aqueous solution. Fluorescence spectroscopy, mass spectrometry, 1H-NMR, and liquid chromatography with fluorescence detection were used to investigate the guest-host interaction of naproxen drug and cucurbiturils. Naproxen was found to form a supramolecular complex with CB7 that had a high formation constant. The optimal conditions for the interaction were discovered using spectroflurometry to be 0.2 mg/ml of CB7, 2.4 µg/ml of naproxen drug, and pH10. A 1:1 complex between naproxen and CB7 is revealed by proton NMR and tandem mass spectrometry. Using the standard addition calibration method, an HPLC with a fluorescence detector was used to detect naproxen in influent and effluent wastewater samples. Finally, it was discovered that the measured concentrations of naproxen in the influent and the effluent wastewater were 1.87 × 10-4 ppb and 2.1 × 10-5 ppb, respectively. This was done by sample enrichment, which reduced the 1000 mL into 1 ml.

Dyeing Non-Recyclable Polyethylene Plastic with Photoacid Phycocyanobilin from Spirulina Algae: Ultrafast Photoluminescence Studies.

Despite the enormous environmental damage caused by plastic waste, it makes up over one-third of globally produced plastics. Polyethylene (PE) wastes have low recycling but high production rates. Towards the construction of ionic solar cells from PE, the present work describes the loading of a bioactive photoacid phycocyanobilin (PCB) dye from the pigment of Spirulina blue-green algae (as a natural resource) on low-density polyethylene (LDPE) plastic film. Dyeing was confirmed by X-ray photoelectron spectroscopy (XPS). Upon excitation of the Soret-band (400 nm), the photoluminescence (PL) spectra of PCB in neat solvents revealed two prominent emission peaks at 450-550 and 600-700 nm. The first band assigned to bilirubin-like (PCBBR) species predominated the spectral profile in the highly rigid solvent glycerol and upon loading 0.45 % (w/w) of the dye on plastic. The photoluminescence excitation (PLE) spectra of PCB for the second region (Q-band) at 672 nm in the same solvents confirmed the ground state heterogenicity previously associated with the presence of PCBA (neutral), PCBB (cationic), and PCBC (anionic) conformers. Time-resolved photoluminescence (TRPL) measurements induced via excitation of all PCB species at 510 nm in methanol revealed three-lifetime components with τ1 = ~0.1 ns and τ2 = ~2 ns associated with PCBBR species and τ3 = ~5 ns pertinent to the long-living photoproduct X*. Decay-associated spectra (DAS) analysis of the photoluminescence transient spectra of the final dyed films in the solid-state confirmed the improved generation of the long-living photoproduct as manifested in a significant increase in the PL intensity (~100-fold) and lifetime value (~90 ns) in the Q-region upon loading 6.92 % (w/w) of the dye on plastic. The photoproduct species were presumably assigned to the deprotonated PCB species, suggesting improved ionic mobility. The potential implementation of the PCB-sensitized PE solid wastes for the fabrication of ionic solar cells is discussed.

A new mode of luminescence in lanthanide oxalates metal-organic frameworks.

Two lanthanide metal-organic frameworks [Ln-MOFs, Ln = Eu(III), Tb(III)] composed of oxalic acid and Ln building units were hydrothermally synthesized and fully characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Furthermore, their magnetic susceptibility measurements were obtained using SQUID based vibrating sample magnetometer (MPMS 3, Quantum Design). Both Ln-MOFs exhibited highly efficient luminescent property. Solid-state photoluminescence (PL) measurements revealed phosphorescence emission bands of Eu-MOF and Tb-MOF centered at 618 nm (red emission) and 550 nm (green emission) upon excitation at 396 nm and 285 nm, respectively. Eu-MOF and Tb-MOF displayed a phosphorescence quantum yield of 53% and 40%, respectively. Time-resolved PL analyses showed very long lifetime values, at 600 and 1065 ± 1 µs for Eu-MOF and Tb-MOF, respectively. Calculations performed by density functional theory indicated a charge transfer form metal centres to the ligand which was in good agreement with the experimental studies. Therefore, this new mode of highly photoluminescent MOF materials is studied for the first time which paves the way for better understanding of these systems for potential applications.