RESUMEN
Introduction: Antibiotic resistance and weak bioavailability of antibiotics in the skin due to systemic administration leads to failure in eradication of vancomycin- and methicillin-resistant Staphylococcus aureus (VRSA and MRSA)-associated wound infections and subsequent septicemia and even death. Accordingly, this study aimed at designing a photocrosslinkable methacrylated chitosan (MECs) hydrogel coated by melittin-derived peptide 1 (MDP1) that integrated the antibacterial activity with the promising skin regenerative capacity of the hydrogel to eradicate bacteria by burst release strategy. Methods: The MECs was coated with MDP1 (MECs-MDP1), characterized, and the hydrogel-peptide interaction was evaluated by molecular docking. Antibacterial activities of MECs-MDP1 were evaluated against VRSA and MRSA bacteria and compared to MECs-vancomycin (MECs-vanco). Antibiofilm activity of MECs-MDP1 was studied by our novel 'in situ biofilm inhibition zone (IBIZ)' assay, and SEM. Biocompatibility with human dermal fibroblast cells (HDFs) was also evaluated. Results and Discussion: Molecular docking showed hydrogen bonds as the most interactions between MDP1 and MECs at a reasonable affinity. MECs-MDP1 eradicated the bacteria rapidly by burst release strategy whereas MECs-vanco failed to eradicate them at the same time intervals. Antibiofilm activity of MECs-MDP1 were also proved successfully. As a novel report, molecular docking analysis has demonstrated that MDP1 covers the structure of MECs and also binds to lysozyme with a reasonable affinity, which may explain the inhibition of lysozyme. MECs-MDP1 was also biocompatible with human dermal fibroblast skin cells, which indicates its safe future application. The antibacterial properties of a photocrosslinkable methacrylated chitosan-based hydrogel coated with MDP1 antimicrobial peptide were successfully proved against the most challenging antibiotic-resistant bacteria causing nosocomial wound infections; VRSA and MRSA. Molecular docking analysis revealed that MDP1 interacts with MECs mainly through hydrogen bonds with reasonable binding affinity. MECs-MDP1 hydrogels eradicated the planktonic state of bacteria by burst release of MDP1 in just a few hours whereas MECs-vanco failed to eradicate them. inhibition zone assay showed the anti-biofilm activity of the MECs-MDP1 hydrogel too. These findings emphasize that MECs-MDP1 hydrogel would be suggested as a biocompatible wound-dressing candidate with considerable and rapid antibacterial activities to prevent/eradicate VRSA/MRSA bacterial wound infections.
RESUMEN
Due to the increasing prevalence of bone disorders among people especially in average age, the future of treatments for osseous abnormalities has been illuminated by scaffold-based bone tissue engineering. In this study, in vitro and in vivo properties of 58S bioactive glass-based scaffolds for bone tissue engineering (bare (B.SC), Zein-coated (C.SC), and Zein-coated containing Kaempferol (KC.SC)) were evaluated. This is a follow-up study on our previously published paper, where we synthesized 58S bioactive glass-based scaffolds coated with Kaempferol-loaded Zein biopolymer, and characterized from mostly engineering points of view to find the optimum composition. For this aim, in vitro assessments were done to evaluate the osteogenic capacity and biological features of the scaffolds. In the in vivo section, all types of scaffolds with/without bone marrow-derived stem cells (BMSC) were implanted into rat calvaria bone defects, and potential of bone healing was assessed using imaging, staining, and histomorphometric analyses. It was shown that, Zein-coating covered surface cracks leading to better mechanical properties without negative effect on bioactivity and cell attachment. Also, BMSC differentiation proved that the presence of Kaempferol caused higher calcium deposition, increased alkaline phosphatase activity, bone-specific gene upregulation in vitro. Further, in vivo study confirmed positive effect of BMSC-loaded KC.SC on significant new bone formation resulting in complete bone regeneration. Combining physical properties of coated scaffolds with the osteogenic effect of Kaempferol and BMSCs could represent a new strategy for bone regeneration and provide a more effective approach to repairing critical-sized bone defects.
Asunto(s)
Células Madre Mesenquimatosas , Zeína , Ratas , Animales , Ingeniería de Tejidos/métodos , Andamios del Tejido , Estudios de Seguimiento , Quempferoles/farmacología , Zeína/farmacología , Osteogénesis , Regeneración Ósea , Vidrio , Diferenciación Celular , CráneoRESUMEN
Cells are smart creatures that respond to every signal after isolation and in vitro culture. Adipose-derived stem cells (ADSCs) gradually lose their characteristic spindle shape, multi-lineage differentiation potential, and self-renewal ability, and enter replicative senescence after in vitro expansion. This loss of cellular function is a serious impediment to clinical applications that require huge numbers of cells. It has been proven that substrates with cell imprints can be applied for stem cells' differentiation into desired cells or to re-culture any cell type while maintaining its ordinary activity. This study demonstrated the application of cell-imprinted substrates as a novel method in the long-term expansion of ADSCs while maintaining their stemness. Here we used molecular imprinting of stem cells as a physical signal to maintain stem cells' stemness. First, ADSCs were isolated and cultured on the tissue culture plate. Then, cells were fixed, and stem cell-imprinted substrates were fabricated using PDMS. Afterward, ADSCs were cultured on these substrates and subjected to osteogenic and adipogenic differentiation signals. The results were compared with ADSCs cultured on a polystyrene tissue culture plate and non-patterned PDMS. Morphology analysis with optical and fluorescence microscopy and SEM images illustrated that ADSCs seeded on imprinted substrates kept ADSC morphology. Alizarin Red S and Oil Red O staining, flow cytometry, and qPCR results showed that ADSC-imprinted substrates could reduce the differentiation of stem cells in vitro even if the differentiating stimulations were applied. Also, cell cycle analysis revealed that ADSCs could maintain their proliferation potential. So this method can maintain stem cells' stemness for a long time and reduce the unwanted stem cell differentiation that occurs in conventional cell culture on tissue culture plates.
Asunto(s)
Impresión Molecular , Proliferación Celular , Células Cultivadas , Poliestirenos , Células MadreRESUMEN
Despite the numerous advantages of PDMS-based substrates in various biomedical applications, they are limited by their highly hydrophobic surface that does not optimally interact with cells for attachment and growth. Hence, the lack of lengthy and straightforward procedures for high-density cell production on the PDMS-based substrate is one of the significant challenges in cell production in the cell therapy field. In this study, we found that the PDMS substrate coated with a combination of polydopamine (PDA) and laminin-511 E8 fragments (PDA + LME8-coated PDMS) can support human-induced pluripotent stem cell (hiPSC) attachment and growth for the long term and satisfy their demands of differentiation into cardiomyocytes (iCMs). Compared with prior studies, the density of hiPSCs and their adhesion time on the PDMS surface were increased during iCM production. Although the differentiated iCMs beat and produce mechanical forces, which disturb cellular attachments, the iCMs on the PDA + LME8-coated PDMS substrate showed dramatically better attachment than the control condition. Further, the substrate required less manipulation by enabling one-step seeding throughout the process in iCM formation from hiPSCs under animal-free conditions. In light of the results achieved, the PDA + LME8-coated PDMS substrate will be an up-and-coming tool for cardiomyocyte production for cell therapy and tissue engineering, microfluidics, and organ-on-chip platforms.
Asunto(s)
Células Madre Pluripotentes Inducidas , Técnicas de Cultivo de Célula/métodos , Diferenciación Celular , Matriz Extracelular , Humanos , Células Madre Pluripotentes Inducidas/metabolismo , Miocitos CardíacosRESUMEN
Acute promyelocytic leukemia (APL) was considered to be one of the most lethal forms of leukemia in adults before the introduction of the vitamin A metabolite all-trans retinoic acid (ATRA). Surprisingly, it has been confirmed that FICZ (6-Formylindolo (3, 2-b) carbazole) enhances ATRA-induced differentiation. Moreover, a number of studies have demonstrated that anti CD44 monoclonal antibody (mAb) induces to bring back differentiation blockage the leukemic stem cells. The level of differentiation markers including CD11b and CD11c in NB4 cells was assessed by flow cytometry. The induction of apoptosis was also evaluated. We estimated the induction potential of a triple compound of ATRA-FICZ, anti-CD44 maps. The cells showed the gradually increased expression levels of CD11b and CD11c. A mixture of a "CD44 mAb, ATRA and FICZ effectively promoted granulocytic maturation resulting in increased rates of apoptosis. The differences in expression of CD11b and CD11c at 5⯵g/ml and 10⯵g/ml were significant. These phenomena were highest at 10⯵g/ml CD44 mAb concentrations. Synergistic induction differentiation and apoptosis of APL cells by using a co-treatment with novel triple compound are more effective for eradicating blasts and controlling the metastasis. Our results show that the addition of anti-CD44 mAb improves "ATRA-FICZ"-induced differentiation and has potential to reduce usual chemotherapy based treatments. Taken together, this compound may lead to novel clinical applications of differentiation-based approaches for APL and other types of leukemia. Further clinical studies would be recommended to clarify the clinical efficacy.
Asunto(s)
Anticuerpos Monoclonales/uso terapéutico , Protocolos de Quimioterapia Combinada Antineoplásica/farmacología , Carbazoles/farmacología , Diferenciación Celular/efectos de los fármacos , Receptores de Hialuranos/inmunología , Leucemia Promielocítica Aguda/tratamiento farmacológico , Leucemia Promielocítica Aguda/patología , Tretinoina/farmacología , Anticuerpos Monoclonales/administración & dosificación , Anticuerpos Monoclonales/inmunología , Apoptosis , Antígeno CD11b/inmunología , Antígeno CD11c/inmunología , Carbazoles/administración & dosificación , Línea Celular Tumoral , Relación Dosis-Respuesta Inmunológica , Sinergismo Farmacológico , Humanos , Leucemia Promielocítica Aguda/inmunología , Tretinoina/administración & dosificaciónRESUMEN
Silk fibroin (SF) is a natural fibrous polymer with strong potential for many biomedical applications. SF has attracted interest in the field of bone tissue engineering due to its extraordinary characteristics in terms of elasticity, flexibility, biocompatibility and biodegradability. However, low osteogenic capacity has limited applications for SF in the orthopedic arena unless suitably functionalized. Hydroxyapatite (HAp) is a well-established bioceramic with biocompatibility and appropriate for constructing orthopedic and dental substitutes. However, HAp ceramics tend to be brittle which can restrict applications in the repair of load-bearing tissues such as bones. Therefore, blending SF and HAp combines the useful properties of both materials as bone constructs for tissue engineering, the subject of this review.
Asunto(s)
Sustitutos de Huesos , Durapatita , Fibroínas , Nanocompuestos , Ingeniería de Tejidos , Andamios del Tejido , Animales , Bovinos , Células Cultivadas , Humanos , PorcinosRESUMEN
This study evaluated tracheal regeneration studies using scientometric and co-occurrence analysis to identify the most important topics and assess their trends over time. To provide the adequate search options, PubMed, Scopus, and Web of Science (WOS) were used to cover various categories such as keywords, countries, organizations, and authors. Search results were obtained by employing Bibexcel. Co-occurrence analysis was applied to evaluate the publications. Finally, scientific maps, author's network, and country contributions were depicted using VOSviewer and NetDraw. Furthermore, the first 25 countries and 130 of the most productive authors were determined. Regarding the trend analysis, 10 co-occurrence terms out of highly frequent words were examined at 5-year intervals. Our findings indicated that the field of trachea regeneration has tested different approaches over the time. In total, 65 countries have contributed to scientific progress both in experimental and clinical fields. Special keywords such as tissue engineering and different types of stem cells have been increasingly used since 1995. Studies have addressed topics such as angiogenesis, decellularization methods, extracellular matrix, and mechanical properties since 2011. These findings will offer evidence-based information about the current status and trends of tracheal replacement research topics over time, as well as countries' contributions.
Asunto(s)
Publicaciones/tendencias , Ingeniería de Tejidos/métodos , Ingeniería de Tejidos/tendencias , Tráquea/fisiología , Animales , Conducta Cooperativa , Bases de Datos como Asunto , HumanosRESUMEN
Electrical current in the hydrolytic phase of the biogas process might affect biogas yield. In this study, four 1,150 mL single membrane-less chamber electrochemical bioreactors, containing two parallel titanium plates were connected to the electrical source with voltages of 0, -0.5, -1 and -1.5 V, respectively. Reactor 1 with 0 V was considered as a control reactor. The trend of biogas production was precisely checked against pH, oxidation reduction potential and electrical power at a temperature of 37 ± 0.5°C amid cattle manure as substrate for 120 days. Biogas production increased by voltage applied to Reactors 2 and 3 when compared with the control reactor. In addition, the electricity in Reactors 2 and 3 caused more biogas production than Reactor 4. Acetogenic phase occurred more quickly in Reactor 3 than in the other reactors. The obtained results from Reactor 4 were indicative of acidogenic domination and its continuous behavior under electrical stimulation. The results of the present investigation clearly revealed that phasic electrical current could enhance the efficiency of biogas production.
Asunto(s)
Biocombustibles/análisis , Estiércol/análisis , Animales , Reactores Biológicos , Bovinos , Electroquímica , Hidrólisis , TemperaturaRESUMEN
In this research, we studied improvement of mechanical properties of dimethacrylate-silica based dental composites by addition of Fuller's Earth (FE) clay. Three composites were made as base compounds consisting of 68, 58, and 48 wt % resin and 31, 41, and 51 wt % silica, respectively. Afterward, the composites were modified by adding FE. Mechanical properties including flexural strength, flexural modulus, work-of-fracture, fracture toughness, and microhardness were measured. Clay particles and fracture surface of composites consisting of 51 wt % silica (with and without FE) were examined by SEM. Measured results showed that flexural strength, work-of-fracture, flexural modulus, and microhardness of all composites increased by including FE nanofibers. Fracture toughness except for composite including 51 wt % silica had similar variations. It seems that locating FE nanofibers in weak resin region among silica particles leads to strengthening mechanisms, such as bridging and crack deflection, which cause improvement in mechanical properties.
Asunto(s)
Compuestos de Aluminio/química , Materiales Dentales/química , Compuestos de Magnesio/química , Nanofibras/química , Silicatos/química , Fenómenos Biomecánicos , Resinas Compuestas/química , Restauración Dental Permanente , Análisis del Estrés Dental , Humanos , Ensayo de Materiales , Metacrilatos/química , Microscopía Electrónica de Rastreo , Nanofibras/ultraestructura , Dióxido de Silicio/química , Estrés MecánicoRESUMEN
Cellulose powder was oxidized by NO2 gas and the porous scaffold was fabricated by dry pressing. RGD peptide was immobilized on the surface of scaffold by grafting to make a hybrid scaffold. The hybrid scaffold was characterized by SEM and FTIR and its biocompatibility was examined through MTT assay. FTIR results proved oxidization of cellulose and bonding between scaffold surface and RGD. Porous microstructure having suitable size was confirmed by SEM. The results by MTT showed significant increase of viable cells on hybrid scaffold. Porous structure and high biocompatibility were the benefits of scaffold in bone tissue engineering.