Association of occupational exposures with ex vivo functional immune response in workers handling carbon nanotubes and nanofibers.

The objective of this study was to evaluate the association between carbon nanotube and nanofiber (CNT/F) exposure and ex vivo responses of whole blood challenged with secondary stimulants, adjusting for potential confounders, in a cross-sectional study of 102 workers. Multi-day exposure was measured by CNT/F structure count (SC) and elemental carbon (EC) air concentrations. Demographic, lifestyle and other occupational covariate data were obtained via questionnaire. Whole blood collected from each participant was incubated for 18 hours with and without two microbial stimulants (lipopolysaccharide/LPS and staphylococcal enterotoxin type B/SEB) using TruCulture technology to evaluate immune cell activity. Following incubation, supernatants were preserved and analyzed for protein concentrations. The stimulant:null response ratio for each individual protein was analyzed using multiple linear regression, followed by principal component (PC) analysis to determine whether patterns of protein response were related to CNT/F exposure. Adjusting for confounders, CNT/F metrics (most strongly, the SC-based) were significantly (p < 0.05) inversely associated with stimulant:null ratios of several individual biomarkers: GM-CSF, IFN-γ, interleukin (IL)-2, IL-4, IL-5, IL-10, IL-17, and IL-23. CNT/F metrics were significantly inversely associated with PC1 (a weighted mean of most biomarkers, explaining 25% of the variance in the protein ratios) and PC2 (a biomarker contrast, explaining 14%). Among other occupational exposures, only solvent exposure was significant (inversely related to PC2). CNT/F exposure metrics were uniquely related to stimulant responses in challenged whole blood, illustrating reduced responsiveness to a secondary stimulus. This approach, if replicated in other exposed populations, may present a relatively sensitive method to evaluate human response to CNT/F or other occupational exposures.

Detection and measurement of surface contamination by multiple antineoplastic drugs using multiplex bead assay.

OBJECTIVES: Contamination of workplace surfaces by antineoplastic drugs presents an exposure risk for healthcare workers. Traditional instrumental methods to detect contamination such as liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) are sensitive and accurate but expensive. Since immunochemical methods may be cheaper and faster than instrumental methods, we wanted to explore their use for routine drug residue detection for preventing worker exposure. METHODS: In this study we examined the feasibility of using fluorescence covalent microbead immunosorbent assay (FCMIA) for simultaneous detection and semi-quantitative measurement of three antineoplastic drugs (5-fluorouracil, paclitaxel, and doxorubicin). The concentration ranges for the assay were 0-1000 ng/ml for 5-fluorouracil, 0-100 ng/ml for paclitaxel, and 0-2 ng/ml for doxorubicin. The surface sampling technique involved wiping a loaded surface with a swab wetted with wash buffer, extracting the swab in storage/blocking buffer, and measuring drugs in the extract using FCMIA. RESULTS: There was no significant cross-reactivity between these drugs at the ranges studied indicated by a lack of response in the assay to cross analytes. The limit of detection (LOD) for 5-fluorouracil on the surface studied was 0.93 ng/cm(2) with a limit of quantitation (LOQ) of 2.8 ng/cm(2), the LOD for paclitaxel was 0.57 ng/cm(2) with an LOQ of 2.06 ng/cm(2), and the LOD for doxorubicin was 0.0036 ng/cm(2) with an LOQ of 0.013 ng/cm(2). CONCLUSION: The use of FCMIA with a simple sampling technique has potential for low cost simultaneous detection and semi-quantitative measurement of surface contamination from multiple antineoplastic drugs.

Detection of 5-fluorouracil surface contamination in near real time.

OBJECTIVES: Contamination of workplace surfaces by antineoplastic drugs presents an exposure risk for healthcare workers. Traditional instrumental methods to detect contamination such as gas chromatography-mass spectrometry (GC-MS) or liquid chromatography-tandem mass spectrometry (LC-MS/MS) are sensitive and accurate but expensive and incapable of producing results in real time. This limits their utility in preventing worker exposure. We are currently developing monitors based on lateral flow immunoassay that can detect drug contamination in near real time. In this report, we describe the laboratory performance of a 5-fluorouracil (5-FU) monitor. METHODS: The monitor was evaluated by spiking ceramic, vinyl, composite, stainless steel, and glass surfaces of 100 cm(2) area with 5-FU masses of 0, 5, 10, 25, 50, and 100 ng. The surface was sampled with a wetted cotton swab, the swab was extracted with buffer, and the resulting solution was applied to a lateral flow monitor. Two ways of evaluating the response of these monitors were used: an electronic method where a lateral flow reader was used for measuring line intensities, and a visual method where the intensity of the test line was visually compared to the control line. RESULTS: The 5-FU monitor is capable of detecting 10 ng/100 cm(2) (0.1 ng/cm(2)) using the electronic reader and 25 ng/100 cm(2) (0.25 ng/cm(2)) using the visual comparison method for the surfaces studied. The response of the monitors was compared to LC-MS/MS results for the same samples for validation and there was good correlation of the two methods but some differences in absolute response, especially at higher spiking levels for the surface samples.

Enhanced performance of methamphetamine lateral flow cassettes using an electronic lateral flow reader.

Surface contamination from methamphetamine in meth labs continues to be a problem. We had previously developed a lateral flow assay cassette for field detection of methamphetamine contamination that is commercially available and has been used by a number of groups to assess contamination. This cassette uses the complete disappearance of the test line as an end point for detection of 50 ng/100 cm2 of methamphetamine contamination for surface sampling with cotton swabs. In the present study, we further evaluate the response of the cassettes using an electronic lateral flow reader to measure the intensities of the test and control lines. The cassettes were capable of detecting 0.25 ng/ml for calibration solutions. For 100 cm2 ceramic tiles that were spiked with methamphetamine and wiped with cotton-tipped wooden swabs wetted in assay/sampling buffer, 1 ng/tile was detected using the reader. Semi-quantitative results can be produced over the range 0-10 ng/ml for calibration solutions and 0-25 ng/tile for spiked tiles using either a 4-parameter logistic fit of test line intensity versus concentration or spiked mass or the ratio of the control line to the test line intensity fit to concentration or spiked mass. Recovery from the tiles was determined to be about 30% using the fitted curves. Comparison of the control line to the test line was also examined as a possible visual detection end point and it was found that the control line became more intense than the test line at 0.5 to 1 ng/ml for calibration solutions or 1 to 2 ng/tile for spiked tiles. Thus the lateral flow cassettes for methamphetamine have the potential to produce more sensitive semi-quantitative results if an electronic lateral flow reader is used and can be more sensitive for detection if the comparison of the control line to the test line is used as the visual end point.

Using urinary biomarkers of polycyclic aromatic compound exposure to guide exposure-reduction strategies among asphalt paving workers.

INTRODUCTION: Paving workers are exposed to polycyclic aromatic compounds (PACs) while working with hot-mix asphalt (HMA). Further characterization of the source and route of these exposures is necessary to guide exposure-reduction strategies. METHODS: Personal air (n=144), hand-wash (n=144), and urine (n=480) samples were collected from 12 paving workers over 3 workdays during 4 workweeks. Urine samples were collected at preshift, postshift, and bedtime and analyzed for 10 hydroxylated PACs (1-OH-pyrene; 1-, 2-, 3-, 4-OH-phenanthrene; 1-, 2-OH-naphthalene; 2-, 3-, 9-OH-fluorene) by an immunochemical quantification of PACs (I-PACs). The air and hand-wash samples were analyzed for the parent compounds corresponding to the urinary analytes. Using a crossover study design, each of the 4 weeks represented a different exposure scenario: a baseline week (normal conditions), a dermal protection week (protective clothing), a powered air-purifying respirator (PAPR) week, and a biodiesel substitution week (100% biodiesel provided to replace the diesel oil normally used by workers to clean tools and equipment). The urinary analytes were analyzed using linear mixed-effects models. RESULTS: Postshift and bedtime concentrations were significantly higher than preshift concentrations for most urinary biomarkers. Compared with baseline, urinary analytes were reduced during the dermal protection (29% for 1-OH-pyrene, 15% for I-PACs), the PAPR (24% for 1-OH-pyrene, 15% for I-PACs), and the biodiesel substitution (15% for 1-OH-pyrene) weeks. The effect of PACs in air was different by exposure scenario (biodiesel substitution>dermal protection>PAPR and baseline) and was still a significant predictor of most urinary analytes during the week of PAPR use, suggesting that PACs in air were dermally absorbed. The application temperature of HMA was positively associated with urinary measures, such that an increase from the lowest application temperature (121°C) to the highest (154°C) was associated with a 72% increase in ΣOH-fluorene and 1-OH-pyrene and an 82% increase in ΣOH-phenanthrene. Though PACs in hand-wash samples were not predictors of urinary analytes, the effects observed during the PAPR scenario and the week of increased dermal protection provide evidence of dermal absorption. CONCLUSIONS: Our results provide evidence that PACs in air are dermally absorbed. Reducing the application temperature of asphalt mix appears to be a promising strategy for reducing PAC exposure among paving workers. Additional reductions may be achieved by requiring increased dermal coverage of workers and by substituting biodiesel for diesel oil as a cleaning agent.

Interlaboratory comparison of three multiplexed bead-based immunoassays for measuring serum antibodies to pneumococcal polysaccharides.

Serotype-specific IgG, as quantified by a standardized WHO enzyme-linked immunosorbent assay (ELISA), is a serologic end point used to evaluate pneumococcal polysaccharide-based vaccine immunogenicity. Antibodies to each vaccine polysaccharide in licensed multivalent vaccines are quantified separately; this is laborious and consumes serum. We compared three bead-based immunoassays: a commercial assay (xMAP Pneumo14; Luminex) and two in-house assays (of the Health Protection Agency [HPA] and Centers for Disease Control and Prevention [CDC]), using the WHO-recommended standard reference and reference sera (n = 11) from vaccinated adults. Multiple comparisons of the IgG concentrations for seven conjugate vaccine serotypes were performed by sample (percent error), serotype (equivalency testing), and laboratory (concordance correlation coefficient [CCC]). When comparing concentrations by sample, bead-based immunoassays generally yielded higher antibody concentrations than the ELISA and had higher variability for serotypes 6B, 18C, and 23F. None of the three assays met the current WHO recommendation of 75% of sera falling within 40% of the assigned antibody concentrations for all seven serotypes. When compared by serotype, the CDC and HPA tests were equivalent for five of seven serotypes, whereas the Luminex assay was equivalent for four of seven serotypes. When overall mean IgG concentrations were compared by laboratory, a higher level of agreement (CCC close to 1) was found among bead-based immunoassays than between the assays and WHO assignments. When compared to WHO assignments, the HPA assay outperformed the other assays (r = 0.920; CCC = 0.894; coefficient of accuracy = 0.972). Additional testing with sera from immunogenicity studies should demonstrate the applicability of this methodology for vaccine evaluation.

Measurement of methamphetamine on surfaces using surface plasmon resonance.

Field methods are needed to assess the contamination of surfaces by methamphetamine from illicit drug manufacturing. This study performed a feasibility study on the use of a surface plasmon resonance (SPR) based instrument (SensiQ Discovery) in the evaluation of surface contamination by methamphetamine. The main goal was to see if the method could be sensitive enough for field measurements. A competitive immunochemical assay was developed for the instrument which was able to measure methamphetamine at 9 ng/ml with a range of 9-250 ng/ml. Methamphetamine was spiked onto ceramic tiles and the assay was able to detect methamphetamine contamination at 25 ng/100 cm(2), which is below the 50 ng/100 cm(2) standard used for surface cleanup assessment. The instrument is compact and mobile and is sensitive enough for use for measurement of methamphetamine on surfaces, so it is a candidate for a field method for methamphetamine surface contamination. Its use for this application will require further development of the instrument to make it more convenient to use. Also further evaluation of ruggedness and use of the instrument under various environmental conditions such as temperature and humidity are needed to define conditions under which the instrument can be employed in field measurements.

A pilot respiratory health assessment of nail technicians: symptoms, lung function, and airway inflammation.

BACKGROUND: Recent surveys suggest nail technicians, particularly artificial nail applicators, have increased respiratory symptoms and asthma risk. METHODS: We examined lung function (n = 62) and a marker of airway inflammation, i.e., exhaled nitric oxide (ENO) (n = 43), in a subset of nail technician and control participants in a pilot health assessment. RESULTS: Bivariate analysis of technicians demonstrated that job latency was inversely correlated with FEV1 percent predicted (FEV1PP) (r = -0.34, P = 0.03) and FVCPP (r = -0.32, P = 0.05). Acrylic gel contact hours were inversely correlated with FEV1PP (r = -0.38, P = 0.02) and FVCPP (r = -0.47, P = 0.003). Current smoking was inversely and significantly (P

Urinary phthalate metabolite concentrations among workers in selected industries: a pilot biomonitoring study.

Phthalates are used as plasticizers and solvents in industrial, medical and consumer products; however, occupational exposure information is limited. We sought to obtain preliminary information on occupational exposures to diethyl phthalate (DEP), di-n-butyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP) by analyzing for their metabolites in urine samples collected from workers in a cross-section of industries. We also obtained data on metabolites of dimethyl phthalate (DMP), benzylbutyl phthalate (BzBP), di-isobutyl phthalate and di-isononyl phthalate. We recruited 156 workers in 2003-2005 from eight industry sectors. We assessed occupational contribution by comparing end-shift metabolite concentrations to the US general population. Evidence of occupational exposure to DEHP was strongest in polyvinyl chloride (PVC) film manufacturing, PVC compounding and rubber boot manufacturing where geometric mean (GM) end-shift concentrations of DEHP metabolites exceeded general population levels by 8-, 6- and 3-fold, respectively. Occupational exposure to DBP was most evident in rubber gasket, phthalate (raw material) and rubber hose manufacturing, with DBP metabolite concentrations exceeding general population levels by 26-, 25- and 10-fold, respectively, whereas DBP exposure in nail-only salons (manicurists) was only 2-fold higher than in the general population. Concentrations of DEP and DMP metabolites in phthalate manufacturing exceeded general population levels by 4- and >1000-fold, respectively. We also found instances where GM end-shift concentrations of some metabolites exceeded general population concentrations even when no workplace use was reported, e.g. BzBP in rubber hose and rubber boot manufacturing. In summary, using urinary metabolites, we successfully identified workplaces with likely occupational phthalate exposure. Additional work is needed to distinguish occupational from non-occupational sources in low-exposure workplaces.

Evaluation of body mass index, pre-vaccination serum progesterone levels and anti-anthrax protective antigen immunoglobulin G on injection site adverse events following anthrax vaccination in women.

BACKGROUND: In 2002, CDC initiated the Anthrax Vaccination Program (AVP) to provide voluntary pre-exposure anthrax vaccination for individuals at high risk for exposure to Bacillus anthracis spores. The AVP offered an opportunity to investigate hypothesized reasons for a reported gender difference in injection site adverse events (AEs) following anthrax vaccine adsorbed (AVA). OBJECTIVES: To evaluate in women the impact of body mass index (BMI), pre-vaccination serum progesterone levels, and pre-vaccination anti-anthrax protective antigen immunoglobulin G concentrations (anti-PA IgG) on the occurrence of AEs following subcutaneous AVA vaccination. METHODS: Participants' BMI was determined at enrollment. Also, pre-vaccination blood samples were assayed for serum progesterone and anti-PA IgG. Post-vaccination solicited AEs were recorded by participants using a 4-day diary card. RESULTS: Obese group had an elevated risk for arm soreness. Decreased pre-vaccination serum progesterone level was associated with arm swelling. Increased pre-vaccination anti-PA IgG was associated with itching on the arm; and within the obese group, was associated with arm swelling, lump or knot, redness, soreness, and warmth. CONCLUSIONS: In AVA vaccinated women, obesity was associated with arm soreness and decreased pre-vaccination serum progesterone levels were associated with increased rate of arm swelling. Increased pre-vaccination anti-PA IgG may be associated with an increased frequency of itching on the arm, and in obese women, may increase the occurrence of arm swelling, lump or knot, redness, and warmth. Administering AVA according to a woman's menstrual phase may reduce the occurrence of certain injection site reactions.

Rapid point-of-care test to detect broad ranges of protective antigen-specific immunoglobulin G concentrations in recipients of the U.S.-licensed anthrax vaccine.

Currently, there is no routine monitoring of an immune response to the anthrax vaccine. Simple on-site tests are needed to evaluate the antibody response of anthrax-vaccinated individuals in the Armed Forces and others at high risk. Using a prototype lateral flow assay (LFA) (R. E. Biagini, D. L. Sammons, J. P. Smith, B. A. MacKenzie, C. A. F. Striley, J. E. Snawder, S. A. Robertson, and C. P. Quinn, Clin. Vaccine Immunol. 13:541-546, 2006), we investigated the agreement between a validated anthrax protective antigen (PA) immunoglobulin G (IgG) enzyme-linked immunosorbent assay (ELISA) and the LFA for 335 unvaccinated and vaccinated subjects. We also investigated the performance of the LFA under the following conditions: thermal shock (i.e., thermal cycling between temperature extremes), high temperature/high relative humidity, high temperature/low relative humidity, and low temperature/low relative humidity. With the anti-PA ELISA used as a standard, the LFA was shown to be optimally diagnostic at 11 microg/ml anti-PA-specific IgG. At this concentration, the LFA specificity and sensitivity were 98% (95% confidence interval [CI], 97% to 100%) and 92% (CI, 88% to 97%), respectively. Receiver operating characteristic curve analysis yielded an area under the curve value of 0.988 (CI, 0.976 to 1.00), suggesting that the LFA is an extremely accurate diagnostic test. For < or = 4 or > or = 50 microg/ml PA-specific IgG, the LFA results for each environmental condition were identical to those obtained in the laboratory. These data indicate that this rapid point-of-care test would be a feasible tool in monitoring the serological antibody responses of individuals that have been vaccinated against anthrax.

Analytical performance of the AtheNA MultiLyte ANA II assay in sera from lupus patients with multiple positive ANAs.

The purpose of this study was to evaluate the precision and accuracy of a commercial multiplexed kit for the measurement of 9 anti-nuclear antibodies (ANAs; anti-SS/A, anti-SS/B, anti-Sm, anti-RNP, anti-Jo-1, anti-Scl-70, anti-dsDNA, anti-Centromere B, and anti-Histone), and to compare these results to a subset of ANAs measured by enzyme-linked immunosorbent assays (ELISA) and immunodiffusion (ID). Sera were obtained from 22 systemic lupus erythematosus (SLE) patients, twelve controls and five others (commercial source) with various autoimmune diseases. ANA results from the AtheNA MultiLyte ANA II Assay (AtheNA) were compared to ELISA results (controls) and patients (ID). The AtheNA interassay coefficients of variation (CVs, N = 39, performed in duplicate; replicated 3x) ranged from 6.2% to 16.7% (mean = 9.8%), while the intra-assay CVs ranged from 5.8% to 14.3% (mean = 10.8%). Compared to results for SLE cases and controls, the sensitivity of AtheNA ranged from 85.7% to 100% (mean = 97.1%), while diagnostic specificity ranged from 16.7% to 100% (mean = 71.6%). There was significant agreement (P values ranging from 0.0001 to 0.03) when analytes coanalyzed by AtheNA and ELISA/ID were evaluated using Cohen's kappa (kappa values ranging from 0.376 to 1.000). No false positive ANA results were observed for either the control or commercial source autoimmune disease sera. These results indicate that the AtheNA assay is a precise and accurate alternative for performing multiple ELISAs or IDs in the diagnosis of autoimmune diseases, especially when the number of sera to be tested is large, such as in clinical screening or epidemiologic studies. It also appears that the AtheNA assay identifies positive ANA specificities which are missed by ID techniques, suggesting that it may have greater analytical sensitivity for some ANAs.

Latex specific IgE: performance characteristics of the IMMULITE 2000 3gAllergy assay compared with skin testing.

BACKGROUND: In the absence of a US Food and Drug Administration (FDA)-cleared latex skin testing reagent, in vitro tests remain important for the diagnosis of latex allergy. OBJECTIVE: To evaluate the performance characteristics of IMMULITE 2000 3gAllergy (Immulite), a third-generation, FDA-cleared, continuous random-access immunoanalyzer, for the quantification of latex specific IgE. METHODS: Stored serum samples (N = 201) from patients classified as having positive or negative latex puncture skin test results were measured for latex specific IgE levels using Immulite, and these data were compared with historical results from 3 second-generation, FDA-cleared IgE antilatex assays (AlaSTAT [Ala], AutoCAP [CAP], and HY*TEC enzyme immunoassay [HT]). RESULTS: The diagnostic performances of the CAP, Ala, and Immulite assays (> or = 0.35 kU/L cutoff value) were equivalent in sensitivity and specificity (P > .05). The HT assay (> or = 0.05 kU/L cutoff value) was more sensitive and less specific (P < .05). Immulite (> or = 0.10 kU/L cutoff value) had greater sensitivity than Ala and CAP and greater specificity than HT (P < .05 for both). Diagnostic efficiency was greater for Immulite than for CAP, Ala, and HT (P < .05). CONCLUSIONS: The Immulite system is superior in diagnostic performance, especially at the 0.10 kU/L or greater cutoff level, for the diagnosis of latex allergy compared with older, second-generation assays. Immulite still misclassifies 15.5% of puncture skin test-positive individuals as negative for latex specific IgE. Compared with second-generation assays, Immulite represents a technological advance, with enhanced speed and less operator intervention.

Rapid, sensitive, and specific lateral-flow immunochromatographic device to measure anti-anthrax protective antigen immunoglobulin g in serum and whole blood.

Evidence from animals suggests that anti-anthrax protective antigen (PA) immunoglobulin G (IgG) from vaccination with anthrax vaccine adsorbed (AVA) is protective against Bacillus anthracis infection. Measurement of anti-PA IgG in human sera can be performed using either enzyme-linked immunosorbent assay or fluorescent covalent microsphere immunoassay (ELISA) (R. E. Biagini, D. L. Sammons, J. P. Smith, B. A. MacKenzie, C. A. Striley, V. Semenova, E. Steward-Clark, K. Stamey, A. E. Freeman, C. P. Quinn, and J. E. Snawder, Clin. Diagn. Lab. Immunol. 11:50-55, 2004). Both these methods are laboratory based. We describe the development of a rapid lateral-flow immunochromatographic assay (LFIA) test kit for the measurement of anti-PA IgG in serum or whole-blood samples (30-microl samples) using colloidal gold nanoparticles as the detection reagent and an internal control. Using sera from 19 anthrax AVA vaccinees (anti-PA IgG range, 2.4 to 340 microg/ml) and 10 controls and PA-supplemented whole-blood samples, we demonstrated that the LFIA had a sensitivity of approximately 3 microg/ml anti-PA IgG in serum and approximately 14 microg/ml anti-PA IgG in whole blood. Preabsorption of sera with PA yielded negative anti-PA LFIAs. The diagnostic sensitivity and specificity of the assay were 100% using ELISA-measured anti-PA IgG as the standard. This kit has utility in determining anti-PA antibody reactivity in the sera of individuals vaccinated with AVA or individuals with clinical anthrax.

Evaluation of the prevalence of antiwheat-, anti-flour dust, and anti-alpha-amylase specific IgE antibodies in US blood donors.

BACKGROUND: Asthma in bakery workers is one of the most frequently occurring forms of occupational asthma in the world. Experience from other countries has shown the prevalence of sensitization (IgE) to bakery-associated allergens (BAAs) (wheat [W], flour dust [FD], alpha-amylase [AA]) in bakery workers to be 5% to 53%, whereas the prevalence in nonoccupationally exposed individuals was estimated to be 1.2% to 6.4%. OBJECTIVE: To estimate the prevalence of BAA sensitization by measuring BAA specific IgE in the residual serum tubes of volunteer blood donors. METHODS: Serum samples from 534 volunteer blood donors were measured for anti-W, anti-FD, and anti-AA specific IgE antibodies (in duplicate) using the AlaSTAT microplate assay. Samples with BAA IgE concentrations of 0.35 kU/L or greater were considered positive. RESULTS: Nineteen of 530 serum samples (3.6%; 95% confidence interval [CI], 3.3%-3.9%) were positive for W (range, 0.38-3.61 kU/L), whereas 31 of 534 (5.8%; 95% CI, 5.3%-6.3%) were positive for FD (range, 0.35-2.34 kU/L) and 5 of 529 (1.0%; 95% CI, 0.9%-1.1%) were positive for AA (range, 0.38-1.59 kU/L). Thirteen serum samples were positive for both W and FD; 1 sample each was positive for W and AA and FD and AA. CONCLUSIONS: The prevalence of IgE sensitization in serum samples from a relatively large unselected population of volunteer blood donors is 1.0% for AA, 3.6% for W, and 5.8% for FD, which agrees well with data from other countries for sensitization prevalence rates for nonoccupationally exposed individuals.

Comparison of a multiplexed fluorescent covalent microsphere immunoassay and an enzyme-linked immunosorbent assay for measurement of human immunoglobulin G antibodies to anthrax toxins.

Recently, the Centers for Disease Control and Prevention reported an accurate, sensitive, specific, reproducible, and quantitative enzyme-linked immunosorbent assay (ELISA) for immunoglobulin G (IgG) antibodies to Bacillus anthracis protective antigen (PA) in human serum (C. P. Quinn, V. A. Semenova, C. M. Elie et al., Emerg. Infect. Dis. 8:1103-1110, 2002). The ELISA had a minimum detectable concentration (MDC) of 0.06 microgram/ml, which, when dilution adjusted, yielded a whole-serum MDC of 3.0 micro g of anti-PA IgG per ml. The reliable detection limit (RDL) was 0.09 microgram/ml, while the dynamic range was 0.06 to 1.7 microgram/ml. The diagnostic sensitivity of the assay was 97.6% and the diagnostic specificity was 94.2% for clinically verified cases of anthrax. A competitive inhibition anti-PA IgG ELISA was also developed to enhance the diagnostic specificity to 100%. We report a newly developed fluorescence covalent microbead immunosorbent assay (FCMIA) for B. anthracis PA which was Luminex xMap technology. The FCMIA MDC was 0.006 microgram of anti-PA IgG per ml, the RDL was 0.016 microgram/ml, and the whole-serum equivalent MDC was 1.5 micrograms/ml. The dynamic range was 0.006 to 6.8 microgram/ml. Using this system, we analyzed 20 serum samples for anti-PA IgG and compared our results to those measured by ELISA in a double-masked analysis. The two methods had a high positive correlation (r2 = 0.852; P < 0.001). The FCMIA appears to have benefits over the ELISA for the measurement of anti-PA IgG, including greater sensitivity and speed, enhanced dynamic range and reagent stability, the use of smaller sample volumes, and the ability to be multiplexed (measurement of more than one analyte simultaneously), as evidenced by the multiplexed measurement in the present report of anti-PA and anti-lethal factor IgG in serum from a confirmed clinical anthrax infection.

Method for simultaneous measurement of antibodies to 23 pneumococcal capsular polysaccharides.

We describe a fluorescent covalent microsphere immunoassay (FCMIA) method for the simultaneous (multiplexed) measurement of immunoglobulin G (IgG) antibodies to 23 pneumococcal capsular polysaccharide (PnPS) serotypes present in the pneumococcal polysaccharide vaccine (PPV23) licensed by the Food and Drug Administration, i.e., PnPSs 1, 2, 3, 4, 5, 6B, 7F, 8, 9N, 9V, 10A, 11A, 12F, 14, 15B, 17F, 18C, 19A, 19F, 20, 22F, 23F, and 33F. In addition, the assay incorporates an internal control that allows for contemporaneous evaluation of the effectiveness of pneumococcal cell wall polysaccharide (C-PS) preadsorption and a second control of PnPS 25 (which is not present in any polysaccharide or conjugate vaccine), which can be used to evaluate interassay reproducibility (useful for pre- versus postvaccination studies). The FCMIA was standardized with U.S. reference antipneumococcal serotype standard serum 89S-2. Preadsorption of 89S-2 with each PnPS and C-PS yielded homologous inhibition for serotypes 1, 6B, 9N, 9V, 11A, 12F,14, 15B, 18C, 19A, 19F, 20, 22F, 25, and 33F; heterologous inhibition for serotypes 9V, 10A, 11A, 12F, 15B, 17F, 20, and 23F; and neither homologous nor heterologous inhibition for serotypes 2, 3, 4, and 5. The minimum detectable concentrations for the 24 multiplexed (PnPS and C-PS) FCMIAs ranged from 20 pg/ml for PnPS 3 to 600 pg/ml for PnPS 14. The PnPS FCMIA method has numerous benefits over enzyme-linked immunosorbent assays commonly used to measure anti-PnPS-specific IgG levels, including increased speed, smaller sample volumes, equivalent or better sensitivity, and increased dynamic range.