Synthesis and Characterization of Carbon-Based Heterogeneous Catalysts for Energy Release of Molecular Solar Thermal Energy Storage Materials.

Molecular solar thermal energy storage (MOST) systems are rapidly becoming a feasible alternative to energy storage and net-zero carbon emission heating. MOST systems involve a single photoisomerization pair that incorporates light absorption, storage, and heat release processes in one recurring cycle. Despite significant recent advancements in the field, the catalytic back-reaction from MOST systems remains relatively unexplored. A wide range of applications is possible, contingent on the energy densities of the specific photoisomers. Here, we report platinum-, copper-, and nickel-based heterogeneous catalysts screened in batch conditions for the back-conversion reaction on the cyano-3-(4-methoxyphenyl)-norbornadiene/quadricyclane pair. Catalyst reactivities are investigated using structural characterization, imaging techniques, and spectroscopic analysis. Finally, the thermal stability is also explored for our best-performing catalysts.

Ring buckling and C=N isomerization pathways for efficient photoprotection in two nature-inspired UVA sunscreens revealed through ultrafast dynamics and high-level calculations.

Sunscreens provide a frontline defense for our DNA against the damage caused by ultraviolet (UV) radiation. The active ingredients in topically applied sunscreens that provide this defense are UV filters, which preferentially absorb or reflect UV radiation before it penetrates the skin and interacts with photosensitive nucleic acids. However, there are concerns related to human and environmental toxicity of current UV filters, and consequently a shift toward nature-inspired, particularly microbial, UV filters. In this paper, new physical insight is provided into the fundamental mechanisms of photoprotection in two synthetic analogs of mycosporine-like amino acid-type UV filters, demonstrating new methods of protection that are distinct from those of current commercial sunscreens, extending previous work in this area. Transient absorption measurements (both transient electronic absorption spectroscopy and transient vibrational absorption spectroscopy) are combined with steady-state studies and high-level computational results to aid our mapping of the experimentally derived lifetimes to real-time photodynamic processes. The conclusions reached here pave the way toward developing new and more efficient biomimetic DNA photoprotectant materials.

Unveiling the Potential of Heterogeneous Catalysts for Molecular Solar Thermal Systems.

Solar energy utilization has gained considerable attention due to its abundance and renewability. However, its intermittent nature presents a challenge in harnessing its full potential. The development of energy storing compounds capable of capturing and releasing solar energy on demand has emerged as a potential solution. These compounds undergo a photochemical transformation that results in a high-energy metastable photoisomer, which stores solar energy in the form of chemical bonds and can release it as heat when required. Such systems are referred to as MOlecular Solar Thermal (MOST)-systems. Although the photoisomerization of MOST systems has been vastly studied, its back-conversion, particularly using heterogeneous catalysts, is still underexplored and the development of effective catalysts for releasing stored energy is crucial. Herein we compare the performance of 27 heterogeneous catalysts releasing the stored energy in an efficient Norbornadiene/Quadricyclane (NBD/QC) MOST system. We report the first benchmarking of heterogeneous catalysts for a MOST system using a robust comparison method of the catalysts' activity and monitoring the conversion using UV-Visible (UV-Vis) spectroscopy. Our findings provide insights into the development of effective catalysts for MOST systems. We anticipate that our assay will reveal the necessity of further investigation on heterogeneous catalysis.

Investigating the Mechanism of Ni-Catalyzed Coupling of Photoredox-Generated Alkyl Radicals and Aryl Bromides: A Computational Study.

Photoredox catalysis has emerged as an alternative to classical cross-coupling reactions, promoting new reactivities. Recently, the use of widely abundant alcohols and aryl bromides as coupling reagents was demonstrated to promote efficient coupling through the Ir/Ni dual photoredox catalytic cycle. However, the mechanism underlying this transformation is still unexplored, and here we report a comprehensive computational study of the catalytic cycle. We have shown that nickel catalysts can promote this reactivity very efficiently through DFT calculations. Two different mechanistic scenarios were explored, suggesting that two catalytic cycles operate simultaneously depending on the concentration of the alkyl radical.

On the Role of N-Heterocyclic Carbene Salts in Alkyl Radical Generation from Alkyl Alcohols: A Computational Study.

Formation of carbon-carbon bonds through cross-coupling reactions using readily available substrates, like alcohols, is crucial for modern organic chemistry. Recently, direct alkyl alcohol functionalization has been achieved by the use of N-Heterocyclic Carbene (NHC) salts via in situ formation of an alcohol-NHC adduct and its activation by a photoredox catalyst to generate carbon-centered alkyl radicals. Experimentally, only electron deficient NHC activators work but the reasons of this behavior remain underexplored. Herein, a DFT computational study of the mechanism of alcohol activation using up to seven NHC salts is performed to shed light into the influence of their electronic properties in the alkyl radical formation. This study demonstrates that four reaction steps are involved in the transformation and characterizes how the electronic properties of the NHC salt affect each step. A fine balance of the NHC electron-richness is proved to be determinant for this transformation.

Photochemical Transformations of Diverse Biologically Active Resveratrol Analogs in Batch and Flow Reactors.

Previous biological tests have shown that some resveratrol analogs exhibited significant antioxidative and cholinesterase inhibitory potential, as evidenced by lower IC50 values compared to the established standards, resveratrol and galantamine, respectively. Photochemical transformations were made in parallel on these compounds in the presence of porphyrin photocatalysts in batch and microreactor, showing the significant advantage of flow photochemistry concerning productivity, selectivity, and yields. In this research, the products of photocatalysis and direct irradiation (photolysis) of resveratrol analogs were compared to elucidate how the types and ratios of the products depend on the excitation energy, to reveal the effects of the substituent on the photoinduced reactions and to rationalize experimentally and computationally the nature and ratio of the obtained products. Thus, two main paths were computed in agreement with the experimental results: isomerization with the participation of triplet state intermediates to yield the experimentally detected cis-isomers and subsequent cyclization following a pathway not available for the trans-isomers. The investigation of five model compounds confirmed the advantages of the flow photoreactor in the photochemical reactions of heterocyclic resveratrol analogs.

Mechanism of the Aza-Piancatelli Reaction: Scope and Limitations of Furan Substitution in Donor-Acceptor Stenhouse Adduct Synthesis.

The aza-Piancatelli reaction has been widely used to synthesize donor-acceptor Stenhouse adducts (DASAs), a new class of molecular photoswitches with unique properties. However, the substitution pattern of furan cores has been limited to position 3, as 3,4-disubstituted furans remain unreactive. Herein, we explore the aza-Piancatelli reaction mechanism using density functional theory (DFT) calculations to understand the influence of the different substituents on the reactivity. We found that all the reaction pathways are kinetically accessible, but the driving force of the reaction is lost in disubstituted furans due to the loss of conjugation in the DASA products. Finally, a simple model is proposed to guide the design of synthetic routes using this reaction.

Controlling Antimicrobial Activity of Quinolones Using Visible/NIR Light-Activated BODIPY Photocages.

Controlling the activity of a pharmaceutical agent using light offers improved selectivity, reduction of adverse effects, and decreased environmental build-up. These benefits are especially attractive for antibiotics. Herein, we report a series of photoreleasable quinolones, which can be activated using visible/NIR light (520-800 nm). We have used BODIPY photocages with strong absorption in the visible to protect two different quinolone-based compounds and deactivate their antimicrobial properties. This activity could be recovered upon green or red light irradiation. A comprehensive computational study provides new insight into the reaction mechanism, revealing the relevance of considering explicit solvent molecules. The triplet excited state is populated and the photodissociation is assisted by the solvent. The light-controlled activity of these compounds has been assessed on a quinolone-susceptible E. coli strain. Up to a 32-fold change in the antimicrobial activity was measured.

E/Z Molecular Photoswitches Activated by Two-Photon Absorption: Comparison between Different Families.

Nonlinear optical techniques as two-photon absorption (TPA) have raised relevant interest within the last years due to the capability to excite chromophores with photons of wavelength equal to only half of the corresponding one-photon absorption energy. At the same time, its probability being proportional to the square of the light source intensity, it allows a better spatial control of the light-induced phenomenon. Although a consistent number of experimental studies focus on increasing the TPA cross section, very few of them are devoted to the study of photochemical phenomena induced by TPA. Here, we show a design strategy to find suitable E/Z photoswitches that can be activated by TPA. A theoretical approach is followed to predict the TPA cross sections related to different excited states of various photoswitches' families, finally concluding that protonated Schiff-bases (retinal)-like photoswitches outperform compared to the others. The donor-acceptor substitution effect is therefore rationalized for the successful TPA activatable photoswitch, in order to maximize its properties, finally also forecasting a possible application in optogenetics. Some experimental measurements are also carried out to support our conclusions.

Controlled Synthesis of Up-Conversion NaYF4:Yb,Tm Nanoparticles for Drug Release under Near IR-Light Therapy.

Up-Conversion materials have received great attention in drug delivery applications in recent years. A specifically emerging field includes the development of strategies focusing on photon processes that promote the development of novel platforms for the efficient transport and the controlled release of drug molecules in the harsh microenvironment. Here, modified reaction time, thermal treatment, and pH conditions were controlled in the synthesis of NaYF4:Yb,Tm up-converted (UC) material to improve its photoluminescence properties. The best blue-emission performance was achieved for the UC3 sample prepared through 24 h-synthesis without thermal treatment at a pH of 5, which promotes the presence of the ß-phase and smaller particle size. NaYF4:Yb,Tm has resulted in a highly efficient blue emitter material for light-driven drug release under near-IR wavelength. Thus, NaYF4:Yb,Tm up-converted material promotes the N-O bond cleavage of the oxime ester of Ciprofloxacin (prodrug) as a highly efficient photosensitized drug delivery process. HPLC chromatography and transient absorption spectroscopy measurements were performed to evaluate the drug release conversion rate. UC3 has resulted in a very stable and easily recovered material that can be used in several reaction cycles. This straightforward methodology can be extended to other drugs containing photoactive chromophores and is present as an alternative for drug release systems.

A photoswitchable helical peptide with light-controllable interface/transmembrane topology in lipidic membranes.

The spontaneous insertion of helical transmembrane (TM) polypeptides into lipid bilayers is driven by three sequential equilibria: solution-to-membrane interface (MI) partition, unstructured-to-helical folding, and MI-to-TM helix insertion. A bottleneck for understanding these three steps is the lack of experimental approaches to perturb membrane-bound hydrophobic polypeptides out of equilibrium rapidly and reversibly. Here, we report on a 24-residues-long hydrophobic α-helical polypeptide, covalently coupled to an azobenzene photoswitch (KCALP-azo), which displays a light-controllable TM/MI equilibrium in hydrated lipid bilayers. FTIR spectroscopy reveals that trans KCALP-azo folds as a TM α-helix (TM topology). After trans-to-cis photoisomerization of the azobenzene moiety with UV light (reversed with blue light), the helical structure of KCALP-azo is maintained, but its helix tilt increased from 32 ± 5° to 79 ± 8°, indication of a reversible TM-to-MI transition. Further analysis indicates that this transition is incomplete, with cis KCALP-azo existing in a ∼90% TM and ∼10% MI mixture.

Design and Tuning of Photoswitches for Solar Energy Storage.

Current energy demand makes it compulsory to explore alternative energy sources beyond fossil fuels. Molecular solar thermal (MOST) systems have been proposed as a suitable technology for the use and storage of solar energy. Compounds used for this application need to fulfil a long series of requirements, being the absorption of sunlight and the energy stored some of the most critical. In this paper, we study different families of well-known molecular photoswitches from the point of view of their potential use as MOST. Starting from basic structures, we use density functional theory (DFT) computational modelling to propose two different strategies to increase the energy difference between isomers and to tune the absorption spectrum. The inclusion of a mechanical lock in the structure, via an alkyl chain and the presence of a hydrogen bonding are shown to directly influence the energy difference and the absorption spectra. Results shown here prove that these two approaches could be relevant for the design of new compounds with improved performance for MOST applications.

Redesigning donor-acceptor Stenhouse adduct photoswitches through a joint experimental and computational study.

Many studies have recently explored a new class of reversible photoswitching compounds named Donor-Acceptor Stenhouse Adducts (DASAs). Upon light irradiation, these systems evolve from a coloured open-chain to a colourless closed-ring form, while the thermal back-reaction occurs at room temperature. In order to fulfill the requirements for different applications, new molecules with specific properties need to be designed. For instance, shifting the activation wavelength towards the red part of the visible spectrum is of relevance to biological applications. By using accurate computational calculations, we have designed new DASAs and predicted some of their photophysical properties. Starting from well-studied donor and acceptor parts, we have shown that small chemical modifications can lead to substantial changes in both photophysical and photoswitching properties of the resulting DASAs. Furthermore, we have also analysed how these substitutions impact the electronic structure of the systems. Finally, some pertinent candidates have been successfully synthesized and their photoswitching properties have been characterized experimentally.

Natural and Artificial Photoprotective Agents.

Sunlight has a long list of positive effects on living beings [...].

π-Bridge Substitution in DASAs: The Subtle Equilibrium between Photochemical Improvements and Thermal Control*.

Donor-acceptor Stenhouse adducts (DASAs) are playing an outstanding role as innovative and versatile photoswitches. Until now, all the efforts have been spent on modifying the donor and acceptor moieties to modulate the absorption energy and improve the cyclization and reversion kinetics. However, there is a strong dependence on specific structural modifications and a lack of predictive behavior, mostly owing to the complex photoswitching mechanism. Here, by means of a combined experimental and theoretical study, the effect of chemical modification of the π-bridge linking the donor and acceptor moieties is systematically explored, revealing the significant impact on the absorption, photocyclization, and relative stability of the open form. In particular, a position along the π-bridge is found to be the most suited to redshift the absorption while preserving the cyclization. However, thermal back-reaction to the initial isomer is blocked. These effects are explained in terms of an increased acceptor capability offered by the π-bridge substituent that can be modulated. This strategy opens the path toward derivatives with infra-red absorption and a potential anchoring point for further functionalization.

Computational and experimental characterization of novel ultraviolet filters.

Many current ultraviolet filters present potential hazards both to humans and to the natural environment. As such there is a new impetus to develop, through intimate characterisation, ultraviolet filters for use in cosmeceuticals. Here we report a new class of organic molecules which have a strong absorption band across the ultraviolet-A and -B regions of the electromagnetic spectrum and high photostability. We have performed ultrafast transient electronic absorption spectroscopy and steady-state spectroscopies, alongside computational studies to track and manipulate photoprotection mechanisms. Our results present a potentially new generation of ultraviolet filters for use in commercial formulations.

Work-hardening Photopolymer from Renewable Photoactive 3,3'-(2,5-Furandiyl)bisacrylic Acid.

The design of a photopolymer around a renewable furan-derived chromophore is presented herein. An optimised semi-continuous oxidation method using MnO2 affords 2,5-diformylfuran from 5-(hydroxymethyl)furfural in gram quantities, allowing the subsequent synthesis of 3,3'-(2,5-furandiyl)bisacrylic acid in good yield and excellent stereoselectivity. The photoactivity of the diester of this monomer is confirmed by reaction under UV irradiation, and the proposed [2+2] cycloaddition mechanism supported further by TD-DFT calculations. Oligoesters of the photoreactive furan diacid with various aliphatic diols are prepared via chemo- and enzyme-catalysed polycondensation. The latter enzyme-catalysed (Candida antarctica lipase B) method results in the highest Mn (3.6 kDa), suggesting milder conditions employed with this protocol minimised unwanted side reactions, including untimely [2+2] cycloadditions, whilst preserving the monomer's photoactivity and stereoisomerism. The photoreactive polyester is solvent cast into a film where subsequent initiator-free UV curing leads to an impressive increase in the material stiffness, with work-hardening characteristics observed during tensile strength testing.

Rapid Access to Borylated Thiophenes Enabled by Visible Light.

Boron-containing thiophenes are important entities in organic/medicinal chemistry as well as in material science. In this Letter, a novel, straightforward, and fast procedure for their production employing visible light as an energy source at room temperature and ambient pressure is reported. All substrates are commercially available, and the process does not require the use of any external photocatalyst.

Fungal Light Emitter: Understanding Its Chemical Nature and pH-Dependent Emission in Water Solution.

Fungal bioluminescence is a fascinating natural process, standing out for the continuous conversion of chemical energy into light. The structure of fungal oxyluciferin (light emitter) was proposed in 2017, being different and more complex than other oxyluciferins. The complexity of fungal oxyluciferin arises from diverse equilibria such as keto/enol tautomerization or deprotonation equilibria of four titratable groups. For this reason, still some crucial details of its structure remain unexplored. To obtain further structural information, a combined experimental and computational study of natural and three synthetic fungal oxyluciferin analogues has been performed. Here, we state the most stable chemical form of fungal oxyluciferin regarding its keto and enol tautomers, in the ground and excited states. We propose the (3Z,5E)-6-(3,4-dihydroxyphenyl)-4-hydroxy-2-oxohexa-3,5-dienoic acid form as the light emitter (fluorescent state) in water solution. Moreover, we show that chemical modifications on fungal oxyluciferin can affect the relative stability of the conformers. Furthermore, we show the clear effect of pH on emission. General conclusions about the role of these titratable groups in emission modulation have been drawn, such as the key role of dihydroxyphenyl deprotonation. This study is key to further analyze the properties of fungal bioluminescence and propose novel synthetic analogues.

Sulfonamide as amide isostere for fine-tuning the gelation properties of physical gels.

(S)-2-Stearamidopentanedioic acid (C18-Glu) is a known LMW gelator that forms supramolecular gels in a variety of solvents. In this work, we have carried out the isosteric substitution of the amide group by a sulfonamide moiety yielding the new isosteric gelator (S)-2-(octadecylsulfonamido)pentanedioic acid (Sulfo-Glu). The gelation ability and the key properties of the corresponding gels were compared in terms of gelation concentration, gel-to-sol transition temperature, mechanical properties, morphology, and gelation kinetics in several organic solvents and water. This comparison was also extended to (S)-2-(4-hexadecyl-1H-1,2,3-triazol-4-yl)pentanedioic acid (Click-Glu), which also constitutes an isostere of C18-Glu. The stabilizing interactions were explored through computational calculations. In general, Sulfo-Glu enabled the formation of non-toxic gels at lower concentrations, faster, and with higher thermal-mechanical stabilities than those obtained with the other isosteres in most solvents. Furthermore, the amide-sulfonamide isosteric substitution also influenced the morphology of the gel networks as well as the release rate of an embedded antibiotic (vancomycin) leading to antibacterial activity in vitro against Staphylococcus aureus.