A capillary absorption spectrometer for stable carbon isotope ratio (13C∕12C) analysis in very small samples.

A capillary absorption spectrometer (CAS) suitable for IR laser isotope analysis of small CO(2) samples is presented. The system employs a continuous-wave (cw) quantum cascade laser to study nearly adjacent rovibrational transitions of different isotopologues of CO(2) near 2307 cm(-1) (4.34 µm). This initial CAS system can achieve relative isotopic precision of about 10 ppm (13)C, or ∼1 per thousand (per mil in delta notation relative to Vienna Pee Dee Belemnite) with 20-100 picomoles of entrained sample within the hollow waveguide for CO(2) concentrations ∼400-750 ppm. Isotopic analyses of such gas fills in a 1-mm ID hollow waveguide of 0.8 m overall physical path length can be carried out down to ∼2 Torr. Overall (13)C∕(12)C ratios can be calibrated to ∼2 per thousand accuracy with diluted CO(2) standards. A novel, low-cost method to reduce cw-fringing noise resulting from multipath distortions in the hollow waveguide is presented, which allows weak absorbance features to be studied at the few ppm level (peak-to-rms) after 1000 scans are co-added in ∼10 s. The CAS is meant to work directly with converted CO(2) samples from a laser ablation-catalytic combustion micro-sampler to provide (13)C∕(12)C ratios of small biological isolates currently operating with spatial resolutions ∼50 µm.

Basal cell proliferation in female SKH-1 mice treated with alpha- and beta-hydroxy acids.

Alpha- and beta-hydroxy acids are compounds that have been used extensively in cosmetic and dermatological formulations. Clinical and qualitative effects of alpha- and beta-hydroxy acids have been well characterized, but little is known about their mechanism of action or acute and chronic biochemical effects. In the present study, we examined the acute proliferative effects of glycolic and salicylic acids on cell proliferation in the epidermis of SKH-1 female mice, using BrdU incorporation as a marker of epidermal proliferation. In preliminary experiments, we observed an increase in the rate of proliferation after 3 days of treatment with 10% glycolic acid-containing cream and this was sustained throughout a 6.5-week (treatment 5 days/week) time course compared with untreated control animals. After each treatment with cream containing glycolic acid there was a wave of proliferation that was maximal 12 to 16 h (significant at p < 0.05) after treatment, followed by a subsequent increase in epidermal thickness at 18 to 20 h (significant at p < 0.05). The effects of the concentration and pH level of glycolic acid- and salicylic acid-containing creams on the rate of proliferation and increases in skin thickness in SKH-1 epidermis were also investigated. We observed a dose-dependent increase in epidermal proliferation of animals treated with either glycolic or salicylic acid. A similar time-dependent response was observed in the epidermal thickness in animals treated with salicylic acid, but not with glycolic acid. Differences in pH (3.5 or 4.0) had no significant effect on either epidermal proliferation or skin thickness. The data that we present here should be useful in characterizing not only the beneficial but also the adverse effects that occur following acute or chronic usage of alpha-hydroxy acids.

Nitrogen dioxide formation during inhaled nitric oxide therapy.

BACKGROUND: Nitrogen dioxide (NO2) is a toxic by-product of inhalation therapy with nitric oxide (NO). The rate of NO2 formation during NO therapy is controversial. METHODS: The formation of NO2 was studied under dynamic flows emulating a base case NO ventilator mixture containing 80 ppm NO in a 90% oxygen matrix. The difficulty in measuring NO2 concentrations below 2 ppm accurately was overcome by the use of tunable diode laser absorption spectroscopy. RESULTS: Using a second-order model, the rate constant, k, for NO2 formation was determined to be (1.19 +/- 0.11) x 10(-11) ppm-2s-1, which is in basic agreement with evaluated data from atmospheric literature. CONCLUSIONS: Inhaled NO can be delivered safely in a well-designed, continuous flow neonatal ventilatory circuit, and NO2 formation can be calculated reliably using the rate constant and circuit dwell time.

On-Demand Generation of a Formaldehyde-in-Air Standard.

The feasibility of using catalytic conversion of methanol to formaldehyde to produce standard amount of substance fractions of formaldehyde was examined. The conversion efficiencies of several catalysts were measured as a function of temperature, balance gas, catalyst bed length, and methanol amount of substance fraction in an effort to identify conditions which yield high and consistent conversion of methanol to formaldehyde. The highest observed conversion rate was (97 ± 4) % using a molybdenum catalyst, where the error is the 2σ uncertainty. The conversion efficiency was found to be consistent over repeated cycles and over a long lifetime test, suggesting that a molybdenum catalyst is a viable candidate for a standard formaldehyde generator, particularly for low formaldehyde amount of substance fractions (< 15 µmol/mol).

Microphone triggering circuit for elimination of mechanically induced frequency-jitter in diode laser spectrometers: implications for quantitative analysis.

An electronic timing circuit using a microphone triggering device has been developed for elimination of mechanically induced frequency-jitter in diode laser spectrometers employing closed-cycle refrigerators. Mechanical compressor piston shocks are detected by the microphone and actuate an electronic circuit which ultimately interrupts data acquisition until the mechanical vibrations are completely quenched. In this way, laser sweeps contaminated by compressor frequency-jitter are not co-averaged. Employing this circuit, measured linewidths were in better agreement with that calculated. The importance of eliminating this mechanically induced frequency-jitter when carrying out quantitative diode laser measurements is further discussed.