RESUMEN
The coronavirus disease 2019 (COVID-19) pandemic has caused detrimental effects on many aspects of healthcare practice. Screening programs for the commonest malignancies, namely colorectal cancer (CRC), breast cancer and cervical cancer have been discontinued or interrupted since the beginning of restriction measures aimed to limit transmission of the new coronavirus infection. Robust evidence exists in favour of the role of screening campaigns in reducing mortality from CRC. In fact, the majority of pre-malignant lesions of the colon and rectum can be diagnosed with colonoscopy and treated by endoscopic or surgical resection. Besides, colonoscopy screening allows the diagnosis of CRCs in their pre-clinical stage. Italy was one of the first European countries where a high level of COVID-19 infections and deaths was observed, and one of the first where lockdowns and strict measures were adopted to reduce the risk of COVID-19 diffusion among the population. A systematic review of the literature was performed, including the PubMed, Scopus, Web of Sciences, and Reference Citation Analysis databases, with the aim of critically evaluating the impact of the COVID-19 pandemic on CRC screening in Italy. We found that reduction of CRC screening activity surpassed 50% in most endoscopic units, with almost 600000 fewer CRC screening exams conducted in the first 5 mo of 2020 vs the same period of 2019. While the consequences of the discontinuation of endoscopy screening for the prognosis and mortality of CRC will be evident in the next few years, recent data confirm that CRC is currently treated at a more advanced stage than in the pre-COVID-19 era. Since delays in CRC prevention and early diagnosis may translate to increased CRC-specific mortality, world healthcare systems should adopt strategies to maintain the regularity of CRC screening during subsequent peaks of the COVID-19 pandemic, or future events that might hamper screening programs.
RESUMEN
INTRODUCTION: Perianal mucinous adenocarcinoma is rarely encountered in the setting of anal neoplasms. The rarity of the disease and the paucity of publications on this topic are responsible for a lack of diagnostic and therapeutic guidelines. PRESENTATION OF CASE: An 80-year-old man with mucinous adenocarcinoma of the anal canal associated with dysplastic polyps of the colon was treated by multiple endoscopic polypectomies and abdomino-perineal resection of the rectum. We discuss the management of this rare case from the diagnosis up to one-year follow-up. DISCUSSION: Perianal mucinous adenocarcinoma is a very rare entity frequently combined with chronic fistulas. Inflammatory symptoms may mislead its diagnosis, which is often delayed. The unique association between perianal mucinous adenocarcinoma and dysplastic polyps of the colon, that we have reported, may suggest a secondary etiology. High clinical suspicion is important for early and correct diagnosis, which should be based on endoanal ultrasound and/or magnetic resonance imaging followed by deep tissue biopsies. CONCLUSION: We stress the importance of accumulating such cases in the literature. The understanding of the etiopathogenic mechanisms may lead to the development of novel diagnostic and therapeutic protocols.
RESUMEN
The system Mg(NH2)2 + 2LiH is considered as an interesting solid-state hydrogen storage material owing to its low thermodynamic stability of ca. 40 kJ/mol H2 and high gravimetric hydrogen capacity of 5.6 wt.%. However, high kinetic barriers lead to slow absorption/desorption rates even at relatively high temperatures (>180 °C). In this work, we investigate the effects of the addition of K-modified LixTiyOz on the absorption/desorption behaviour of the Mg(NH2)2 + 2LiH system. In comparison with the pristine Mg(NH2)2 + 2LiH, the system containing a tiny amount of nanostructured K-modified LixTiyOz shows enhanced absorption/desorption behaviour. The doped material presents a sensibly reduced (â¼30 °C) desorption onset temperature, notably shorter hydrogen absorption/desorption times and reversible hydrogen capacity of about 3 wt.% H2 upon cycling. Studies on the absorption/desorption processes and micro/nanostructural characterizations of the Mg(NH2)2 + 2LiH + K-modified LixTiyOz system hint to the fact that the presence of in situ formed nanostructure K2TiO3 is the main responsible for the observed improved kinetic behaviour.
RESUMEN
The crystal structure of a mixed amide-imide phase, RbMgND2ND, has been solved in the orthorhombic space group Pnma ( a = 9.55256(31), b = 3.70772(11) and c = 10.08308(32) Å). A new metal amide-hydride solid solution, Rb(NH2) xH(1- x), has been isolated and characterized in the entire compositional range. The profound analogies, as well as the subtle differences, with the crystal chemistry of KMgND2ND and K(NH2) xH1- x are thoroughly discussed. This approach suggests that the comparable performances obtained using K- and Rb-based additives for the Mg(NH2)2- 2LiH and 2LiN H2-MgH2 hydrogen storage systems are likely to depend on the structural similarities of possible reaction products and intermediates.
RESUMEN
The 6Mg(NH2)2-9LiH-LiBH4 composite system has a maximum reversible hydrogen content of 4.2 wt% and a predicted dehydrogenation temperature of about 64 °C at 1 bar of H2. However, the existence of severe kinetic barriers precludes the occurrence of de/re-hydrogenation processes at such a low temperature (H. Cao, G. Wu, Y. Zhang, Z. Xiong, J. Qiu and P. Chen, J. Mater. Chem. A, 2014, 2, 15816-15822). In this work, Li3N and YCl3 have been chosen as co-additives for this system. These additives increase the hydrogen storage capacity and hasten the de/re-hydrogenation kinetics: a hydrogen uptake of 4.2 wt% of H2 was achieved in only 8 min under isothermal conditions at 180 °C and 85 bar of H2 pressure. The re-hydrogenation temperature, necessary for a complete absorption process, can be lowered below 90 °C by increasing the H2 pressure above 185 bar. Moreover, the results indicate that the hydrogenation capacity and absorption kinetics can be maintained roughly constant over several cycles. Low operating temperatures, together with fast absorption kinetics and good reversibility, make this system a promising on-board hydrogen storage material. The reasons for the improved de/re-hydrogenation properties are thoroughly investigated and discussed.
RESUMEN
A new complex ternary amide, Rb2 [Mn(NH2 )4 ], which simultaneously contains both transition and alkali metal catalytic sites, is developed. This is in line with the recently reported TM-LiH composite catalysts, which have been shown to effectively break the scaling relations and achieve ammonia synthesis under mild conditions. Rb2 [Mn(NH2 )4 ] can be facilely synthesized by mechanochemical reaction at room temperature. It exhibits two temperature-dependent polymorphs, that is, a low-temperature orthorhombic and a high-temperature monoclinic structure. Rb2 [Mn(NH2 )4 ] decomposes to N2 , H2 , NH3 , Mn3 N2 , and RbNH2 under inert atmosphere; whereas it releases NH3 at a temperature as low as 80 °C under H2 atmosphere. Those unique behaviors enable Rb2 [Mn(NH2 )4 ], and its analogue K2 [Mn(NH2 )4 ], to be excellent catalytic materials for ammonia decomposition and synthesis. Experimental results show both ammonia decomposition onset temperatures and conversion rates over Rb2 [Mn(NH2 )4 ] and K2 [Mn(NH2 )4 ] are similar to those of noble metal Ru-based catalysts. More importantly, these ternary amides exhibit superior capabilities in catalyzing NH3 synthesis, which are more than 3 orders of magnitude higher than that of Mn nitride and twice of that of Ru/MgO. The in situ SR-PXD measurement shows that manganese nitride, synergistic with Rb/KH or Rb/K(NH2 )x H1-x , are likely the active sites. The chemistry of Rb2 /K2 [Mn(NH2 )x ] and Rb/K(NH2 )x H1-x with H2 /N2 and NH3 correlates closely with the catalytic performance.
RESUMEN
A series of ammine metal-dodecahydro-closo-dodecaboranes, MxB12H12·nNH3 (M = Li, Na, Ca) were synthesized and their structural and thermal properties studied with in situ time-resolved synchrotron radiation powder X-ray diffraction, thermal analysis, Fourier transformed infrared spectroscopy, and temperature-programmed photographic analysis. The synthesized compounds, Li2B12H12·7NH3, Na2B12H12·4NH3 and CaB12H12·6NH3, contain high amounts of NH3, 43.3, 26.6 and 35.9 wt% NH3, respectively, which can be released and absorbed reversibly at moderate conditions without decomposition, thereby making the closo-boranes favorable 'host' materials for ammonia or indirect hydrogen storage in the solid state. In this work, fifteen new ammine metal dodecahydro-closo-dodecaborane compounds are observed by powder X-ray diffraction, of which six are structurally characterized, Li2B12H12·4NH3, Li2B12H12·2NH3, Na2B12H12·4NH3, Na2B12H12·2NH3, CaB12H12·4NH3 and CaB12H12·3NH3. Li2B12H12·4NH3 and Na2B12H12·4NH3 are isostructural and monoclinic (P21/n) whereas Na2B12H12·2NH3 and CaB12H12·3NH3 are both trigonal with space groups P3[combining macron]m1 and R3[combining macron]c, respectively. Generally, coordination between the metal and the icosahedral closo-borane anion is diverse and includes point sharing, edge sharing, or face sharing, while coordination of ammonia always occurs via the lone pair on nitrogen to the metal. Furthermore, a liquid intermediate is observed during heating of Li2B12H12·7NH3. This work provides deeper insight into the structural, physical, and chemical properties related to thermal decomposition and possible ammonia and hydrogen storage.
RESUMEN
The doping effect of Sr(OH)2 on the Mg(NH2)2-2LiH system is investigated considering different amounts of added Sr(OH)2 in the range of 0.05 to 0.2 mol. Experimental results show that both the thermodynamic and the kinetic properties of Mg(NH2)2-2LiH are influenced by the presence of Sr(OH)2. The addition of 0.1 mol Sr(OH)2 leads to a decrease in both the dehydrogenation onset and peak temperatures of ca. 70 and 13 °C, respectively, and an acceleration in the de/re-hydrogenation rates of one time at 150 °C compared to Mg(NH2)2-2LiH alone. Based on differential scanning calorimetry (DSC) analysis, the overall reaction enthalpy of the 0.1 Sr(OH)2-doped sample is calculated to be 44 kJ per mol-H2 and there are two absorption events occurring in the doped sample instead of one in the pristine sample. For the applied experimental conditions, according to the in situ synchrotron radiation powder X-ray diffraction (SR-PXD) and Fourier Transform Infrared spectroscopy (FT-IR) analysis, the reaction mechanism has been finally defined: Sr(OH)2, Mg(NH2)2 and LiH react with each other to form SrO, MgO and LiNH2 during ball milling. After heating, SrO interacts with Mg(NH2)2 producing MgO and Sr(NH2)2. Then Mg(NH2)2, LiNH2 and Sr(NH2)2 react with LiH to produce Li2NH, SrNH, Li2Mg(NH)2 and Li2Mg2(NH)3 in traces. After re-hydrogenation, LiSrH3, LiH and LiNH2 are formed along with amorphous Mg(NH2)2. The reasons for the improved kinetics are: (a) during dehydrogenation, the in situ formation of SrNH appears to increase the interfacial contacts between Mg(NH2)2 and LiH and also weakens the N-H bond of Mg(NH2)2; (b) during absorption, the formation of LiSrH3 at around 150 °C could be the key factor for improving the hydrogenation properties.
RESUMEN
We report for the first time the formation of a metal amide-hydride solid solution. The dissolution of KH into KNH2 leads to an anionic substitution, which decreases the interaction among NH2- ions. The rotational properties of the high temperature polymorphs of KNH2 are thereby retained down to room temperature.
RESUMEN
K2[Mn(NH2)4] and K2[Zn(NH2)4] were successfully synthesized via a mechanochemical method. The mixture of K2[Mn(NH2)4] and LiH showed excellent rehydrogenation properties. In fact, after dehydrogenation K2[Mn(NH2)4]-8LiH fully rehydrogenates within 60 seconds at ca. 230 °C and 5 MPa of H2. This is one of the fastest rehydrogenation rates in amide-hydride systems known to date. This work also shows a strategy for the synthesis of transition metal nitrides by decomposition of the mixtures of M[M'(NH2)n] (where M is an alkali or alkaline earth metal and M' is a transition metal) and metal hydrides.
RESUMEN
The alkali metal amidozincates Li4 [Zn(NH2)4](NH2)2 and K2[Zn(NH2)4] were, to the best of our knowledge, studied for the first time as hydrogen storage media. Compared with the LiNH2-2 LiH system, both Li4 [Zn(NH2)4](NH2)2-12 LiH and K2[Zn(NH2)4]-8 LiH systems showed improved rehydrogenation performance, especially K2[Zn(NH2)4]-8 LiH, which can be fully hydrogenated within 30â s at approximately 230 °C. The absorption properties are stable upon cycling. This work shows that ternary amides containing transition metals have great potential as hydrogen storage materials.
Asunto(s)
Amidas/química , Hidrógeno/química , Metales Alcalinos/química , Elementos de Transición/química , Zinc/química , TemperaturaRESUMEN
Designing safe, compact and high capacity hydrogen storage systems is the key step towards introducing a pollutant free hydrogen technology into a broad field of applications. Due to the chemical bonds of hydrogen-metal atoms, metal hydrides provide high energy density in safe hydrogen storage media. Reactive hydride composites (RHCs) are a promising class of high capacity solid state hydrogen storage systems. Ca(BH4)2 + MgH2 with a hydrogen content of 8.4 wt% is one of the most promising members of the RHCs. However, its relatively high desorption temperature of â¼350 °C is a major drawback to meeting the requirements for practical application. In this work, by using NbF5 as an additive, the dehydrogenation temperature of this RHC was significantly decreased. To elucidate the role of NbF5 in enhancing the desorption properties of the Ca(BH4)2 + MgH2 (Ca-RHC), a comprehensive investigation was carried out via manometric measurements, mass spectrometry, Differential Scanning Calorimetry (DSC), in situ Synchrotron Radiation-Powder X-ray Diffraction (SR-PXD), X-ray Absorption Spectroscopy (XAS), Anomalous Small-Angle X-ray Scattering (ASAXS), Scanning and Transmission Electron Microscopy (SEM, TEM) and Nuclear Magnetic Resonance (NMR) techniques.