Synthesis and evaluation of antibacterial activity of transition metal-oleoyl amide complexes.

Recent studies show that some metal ions, injure microbial cells in various ways due to membrane breakdown, protein malfunction, and oxidative stress. Metal complexes are suited for creating novel antibacterial medications due to their distinct mechanisms of action and the variety of three-dimensional geometries they can acquire. In this Perspective, the present study focused on new antibacterial strategies based on metal oleoyl amide complexes. Thus, oleoyl amides ligand (fatty hydroxamic acid and fatty hydrazide hydrate) with the transition metal ions named Ag (I), Co (II), Cu (II), Ni (II) and Sn (II) complexes were successfully synthesized in this study. The metals- oleoyl amide were characterized using elemental analysis, and fourier transforms infrared (FTIR) spectroscopy. The antibacterial effect of metals- oleoyl amide complexes was investigated for Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by analysing minimum inhibitory concentration (MIC), minimal bactericidal concentration (MBC), and scanning electron microscopy (SEM). The results showed that metal-oleoyl amide complexes have high antibacterial activity at low concentrations. This study inferred that metal oleoyl amide complexes could be utilised as a promising therapeutic antibacterial agent.

Theoretical assessments and optical and electrochemical properties of the alkoxylated bischalcone as emissive material in single-layer OLED.

A new bischalcone comprising of hexyloxy (-OC6H2n+1) chain based on 'Donor (D)-π-Donor (D)' system was successfully designed and synthesized to demonstrate as emitting material for single-layer OLEDs. Density functional theory (DFT) assessment at B3LYP/6-31G(d,p) was computed to obtain frontier molecular orbitals (FMOs), chemical reactivity and molecular electrostatic potential (MEP). The utilization of alkoxy substructure towards the chalcone moiety has increased the solubility and contributed to HOMO-LUMO gap energy level 3.473 eV by UV-Vis spectroscopy and was found to have good agreement with the theoretical calculations. The investigations on their optical, electrochemical and thermal behaviour also were conducted via UV-Vis, cyclic voltammetry (CV), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The entitled alkoxylated bischalcone (CSAB) revealed good thermal stability up to 300 °C and showed high glass transition temperatures. At positive potential, a quasi-reversible oxidation (Eox 1/2) peak at 2.40 V and negative potentials exhibited reduction peak at 0.78 V, respectively. The application of CSAB was tested in the form of thin film in respect to its conductivity in terms of electrical current and electroluminescence behaviour. It gave an intense yellow emission which has provided depth fundamental understanding on its potentiality featuring alkoxylated bischalcone moiety as solution-processed OLED material in optoelectronic interests.

Fabrication of biopolymer polyhydroxyalkanoate/chitosan and 2D molybdenum disulfide-doped scaffolds for antibacterial and biomedical applications.

Antibiotic resistance in pathogenic bacteria is a major health challenge, as Infectious Diseases Society of America (IDSA) has recognized that the past simply drugs susceptible pathogens are now the most dangerous pathogens due to their nonstop growing resistance towards conventional antibiotics. Therefore, due to the emergence of multi-drug resistance, the bacterial infections have become a serious global problem. Acute infections feasibly develop into chronic infections because of many factors; one of them is the failure of effectiveness of antibiotics against superbugs. Modern research of two-dimensional nanoparticles and biopolymers are of great interest to attain the intricate bactericidal activity. In this study, we fabricated an antibacterial nanocomposite consisting of representative two-dimensional molybdenum disulfide (2D MoS2) nanoparticles. Polyhydroxyalkanoate (PHA) and chitosan (Ch) are used to encapsulate MoS2 nanoparticles into their matrix. This study reports the in vitro antibacterial activity and host cytotoxicity of novel PHA-Ch/MoS2 nanocomposites. PHA-Ch/MoS2 nanocomposites were subjected to time-dependent antibacterial assays at various doses to examine their antibacterial activity against multi-drug-resistant Escherichia coli K1 (Malaysian Type Culture Collection 710859) and methicillin-resistant Staphylococcus aureus (MRSA) (Malaysian Type Culture Collection 381123). Furthermore, the cytotoxicity of nanocomposites was examined against spontaneously immortalized human keratinocyte (HaCaT) cell lines. The results indicated significant antibacterial activity (p value < 0.05) against E. coli K1 and MRSA. In addition, PHA-Ch/MoS2 showed significant host cytocompatibility (p < 0.05) against HaCaT cells. The fabricated PHA-Ch/MoS2 nanocomposites have demonstrated effective antibacterial activity against both Gram-positive and -negative bacteria and exhibited better biocompatibility. Finally, PHA-Ch/MoS2 nanocomposites are shown to be suitable for antibacterial applications and also hold potential for further biomedical studies. Graphical Abstract.

Rheological and thermal degradation properties of hyperbranched polyisoprene prepared by anionic polymerization.

Hyperbranched polyisoprene was prepared by anionic copolymerization under high vacuum condition. Size exclusion chromatography was used to characterize the molecular weight and branching nature of these polymers. The characterization by differential scanning calorimetry and melt rheology indicated lower Tg and complex viscosity in the branched polymers as compared with the linear polymer. Degradation kinetics of these polymers was explored using thermogravimetric analysis via non-isothermal techniques. The polymers were heated under nitrogen from ambient temperature to 600°C using heating rates from 2 to 15°C min-1. Three kinetics methods namely Friedman, Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose were used to evaluate the dependence of activation energy (Ea ) on conversion (α). The hyperbranched polyisoprene decomposed via multistep mechanism as manifested by the nonlinear relationship between α and Ea while the linear polymer exhibited a decline in Ea at higher conversions. The average Ea values range from 258 to 330 kJ mol-1 for the linear, and from 260 to 320 kJ mol-1 for the branched polymers. The thermal degradation of the polymers studied involved one-dimensional diffusion mechanism as determined by Coats-Redfern method. This study may help in understanding the effect of branching on the rheological and decomposition kinetics of polyisoprene.

Synthesis and characterisation of highly branched polyisoprene: exploiting the "Strathclyde route" in anionic polymerisation.

This work aimed at developing a synthetic route towards highly branched poly(isoprene) from commercially available raw materials, in good yield and devoid of microgelation, i.e., to prepare a completely soluble polymer via the versatile technique anionic polymerisation. The polymerisations were conducted under high vacuum conditions using sec-butyllithium as initiator at 50 °C in toluene. Toluene served both as a solvent and as a chain-transfer agent. The polar modifier used was tetramethylethylenediamine (TMEDA), and a commercial mixture of divinylbenzene (DVB) was employed as the branching agent for the "living" poly(isoprenyl)lithium anions. The nature of the reaction was studied on the TMEDA/Li ratio as well as the DVB/Li ratio. The obtained branched polymers were characterised by triple detection size exclusion chromatography (SEC), proton nuclear magnetic resonance spectroscopy (1H NMR), differential scanning calorimetry (DSC) and melt rheology. Broad molecular weight distributions have been obtained for the highly branched polymer products. 1H NMR spectroscopy reveals the dominance of 3,4-polyisoprene microstructure. It was found that the complex viscosities and dynamic moduli of the branched samples were much lower compared to their linear counterparts. The results conform with earlier findings by the "Strathclyde team" for radical polymerisation systems. This methodology has the potential of providing soluble branched vinyl polymers at low cost using the readily available raw materials.

Synthesis of Polyaniline-Coated Graphene Oxide@SrTiO3 Nanocube Nanocomposites for Enhanced Removal of Carcinogenic Dyes from Aqueous Solution.

The present investigation highlights the synthesis of polyaniline (PANI)-coated graphene oxide doped with SrTiO3 nanocube nanocomposites through facile in situ oxidative polymerization method for the efficient removal of carcinogenic dyes, namely, the cationic dye methylene blue (MB) and the anionic dye methyl orange (MO). The presence of oxygenated functional groups comprised of hydroxyl and epoxy groups in graphene oxide (GO) and nitrogen-containing functionalities such as imine groups and amine groups in polyaniline work synergistically to impart cationic and anionic nature to the synthesised nanocomposite, whereas SrTiO3 nanocubes act as spacers aiding in segregation of GO sheets, thereby increasing the effective surface area of nanocomposite. The synthesised nanocomposites were characterised by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The adsorption efficiencies of graphene oxide (GO), PANI homopolymer, and SrTiO3 nanocubes-doped nanocomposites were assessed by monitoring the adsorption of methylene blue and methyl orange dyes from aqueous solution. The adsorption efficiency of nanocomposites doped with SrTiO3 nanocubes were found to be of higher magnitude as compared with undoped nanocomposite. Moreover, the nanocomposite with 2 wt % SrTiO3 with respect to graphene oxide demonstrated excellent adsorption behaviour with 99% and 91% removal of MB and MO, respectively, in a very short duration of time.

Exploiting ß-cyclodextrin in molecular imprinting for achieving recognition of benzylparaben in aqueous media.

The molecularly imprinted polymer (MIP) based on methacrylic acid functionalized ß-cyclodextrin (MAA-ß-CD) monomer was synthesized for the purpose of selective recognition of benzylparaben (BzP). The MAA-ß-CD monomer was produced by bridging a methacrylic acid (MAA) and ß-cyclodextrin (ß-CD) using toluene-2,4-diisocyanate (TDI) by reacting the -OH group of MAA and one of the primary -OH groups of ß-CD. This monomer comprised of triple interactions that included an inclusion complex, π-π interaction, and hydrogen bonding. To demonstrate ß-CD performance in MIPs, two MIPs were prepared; molecularly imprinted polymer-methacrylic acid functionalized ß-cyclodextrin, MIP(MAA-ß-CD), and molecularly imprinted polymer-methacrylic acid, MIP(MAA); both prepared by a reversible addition fragmentation chain transfer polymerization (RAFT) in the bulk polymerization process. Both MIPs were characterized using the Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and Brunauer-Emmett-Teller (BET). The presence of ß-CD not only influenced the morphological structure, it also affected the specific surface area, average pore diameter, and total pore volume of the MIP. The rebinding of the imprinting effect was evaluated in binding experiments, which proved that the ß-CD contributed significantly to the enhancement of the recognition affinity and selective adsorption of the MIP.

Molecular imprinted polymer of methacrylic acid functionalised ß-cyclodextrin for selective removal of 2,4-dichlorophenol.

This work describes methacrylic acid functionalized ß-cyclodextrin (MAA-ßCD) as a novel functional monomer in the preparation of molecular imprinted polymer (MIP MAA-ßCD) for the selective removal of 2,4-dichlorophenol (2,4-DCP). The polymer was characterized using Fourier Transform Infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) and Field Emission Scanning Electron Microscopy (FESEM) techniques. The influence of parameters such as solution pH, contact time, temperature and initial concentrations towards removal of 2,4-DCP using MIP MAA-ßCD have been evaluated. The imprinted material shows fast kinetics and the optimum pH for removal of 2,4-DCP is pH 7. Compared with the corresponding non-imprinted polymer (NIP MAA-ßCD), the MIP MAA-ßCD exhibited higher adsorption capacity and outstanding selectivity towards 2,4-DCP. Freundlich isotherm best fitted the adsorption equilibrium data of MIP MAA-ßCD and the kinetics followed a pseudo-second-order model. The calculated thermodynamic parameters showed that adsorption of 2,4-DCP was spontaneous and exothermic under the examined conditions.

Synthesis and Characterization of the Inclusion Complex of ß-cyclodextrin and Azomethine.

A ß-cyclodextrin (ß-Cyd) inclusion complex containing azomethine as a guest was prepared by kneading method with aliquot addition of ethanol. The product was characterized by Fourier Transform Infrared (FTIR) spectrometer, 1H Nuclear Magnetic Resonance (1H NMR) and Thermogravimetric Analyzer (TGA), which proves the formation of the inclusion complex where the benzyl part of azomethine has been encapsulated by the hydrophobic cavity of ß-Cyd. The interaction of ß-Cyd and azomethine was also analyzed by means of spectrometry by UV-Vis spectrophotometer to determine the formation constant. The formation constant was calculated by using a modified Benesi-Hildebrand equation at 25 °C. The apparent formation constant obtained was 1.29 × 104 L/mol. Besides that, the stoichiometry ratio was also determined to be 1:1 for the inclusion complex of ß-Cyd with azomethine.