Titer and charge-based heterogeneity multiattribute monitoring of mAbs in cell culture harvest using 2D ProA CEX MS.

Robust monitoring of heterogeneity in biopharmaceutical development is crucial for producing safe and efficacious biotherapeutic products. Multiattribute monitoring (MAM) has emerged as an efficient tool for monitoring of mAb heterogeneities like deamidation, sialylation, glycosylation, and oxidation. Conventional biopharma analysis during mAb development relies on use of one-dimensional methods for monitoring titer and charge-based heterogeneity using non-volatile solvents without direct coupling with mass spectrometry (MS). This approach requires analysis of mAb harvest by ProA for titer estimation followed by separate cation exchange chromatography (CEX) analysis of the purified sample for estimating charge-based heterogeneity. This can take up to 60-90 min due to the required fraction collection and buffer exchange steps. In this work, a native two-dimensional liquid chromatography (2DLC) mass spectrometry method has been developed with Protein A chromatography in the first dimension for titer estimation and cation exchange chromatography (CEX) in the second dimension for charge variant analysis. The method uses volatile salts for both dimensions and enables easy coupling to MS. The proposed 2DLC method exhibits a charge variant profile that is similar to that observed via the traditional methods and takes only 15 min for mass identification of each variant. A total of six charge variants were separated by the CEX analysis after titer estimation, including linearity assessment from 5 µg to 160 µg of injected mAb sample. The proposed method successfully estimated charge variants for the mAb innovator and 4 of its biosimilars, showcasing its applicability for biosimilarity exercises. Hence, the 2D ProA CEX MS method allows direct titer and charge variant estimation of mAbs in a single workflow.

Impact of Excipient Extraction and Buffer Exchange on Recombinant Monoclonal Antibody Stability.

The foundation of a biosimilar manufacturer's regulatory filing is the demonstration of analytical and functional similarity between the biosimilar product and the pertinent originator product. The excipients in the formulation may interfere with characterization using typical analytical and functional techniques during this biosimilarity exercise. Consequently, the producers of biosimilar products resort to buffer exchange to isolate the biotherapeutic protein from the drug product formulation. However, the impact that this isolation has on the product stability is not completely known. This study aims to elucidate the extent to which mAb isolation via ultrafiltration-diafiltration-based buffer exchange impacts mAb stability. It has been demonstrated that repeated extraction cycles do result in significant changes in higher-order structure (red-shift of 5.0 nm in fluorescence maxima of buffer exchanged samples) of the mAb and also an increase in formation of basic variants from 19.1 to 26.7% and from 32.3 to 36.9% in extracted innovator and biosimilar Tmab samples, respectively. It was also observed that under certain conditions of tertiary structure disruptions, Tmab could be restabilized depending on formulation composition. Thus, mAb isolation through extraction with buffer exchange impacts the product stability. Based on the observations reported in this paper, we recommend that biosimilar manufacturers take into consideration these effects of excipients on protein stability when performing biosimilarity assessments.

What should next-generation analytical platforms for biopharmaceutical production look like?

Biotherapeutic products, particularly complex products such as monoclonal antibodies (mAbs), have as many as 20-30 critical quality attributes (CQAs), thereby requiring a collection of orthogonal, high-resolution analytical tools for characterization and making characterization a resource-intensive task. As discussed in this Opinion, the need to reduce the cost of developing biotherapeutic products and the need to adopt Industry 4.0 and eventually Industry 5.0 paradigms are driving a reappraisal of existing analytical platforms. Next-generation platforms will have reduced offline testing, renewed focus on online testing and real-time monitoring, multiattribute monitoring, and extensive use of advanced data analytics and automation. They will be more complex, more sensitive, resource lean, and more responsive compared with existing platforms.

High-throughput capillary electrophoresis analysis of biopharmaceuticals utilizing sequential injections.

The complexity of biotherapeutic products implies an ever-increasing list of product quality attributes that need to be monitored and characterized. In addition, the growing interest in implementing process analytical technology in biopharmaceutical production has further increased the testing burden, together with the need for rapid testing that can facilitate real-time or near-real-time decision-making. Capillary electrophoresis (CE) has made a place in biopharmaceutical analysis but is regarded as a low-throughput method, with the instrument dead time constituting more than 80% of the total time of analysis. In this study, the dead time of CE was utilized to analyse 3 mAb samples in a single-CE run. This approach resulted in an up to 77% reduction in the total analysis time and increased the productivity by up to 300%, compared to traditional single CE-ultraviolet runs, without compromising resolution or relative peak areas. Additionally, good method reproducibility was observed. The compatibility of the method has been demonstrated with protein A eluate and cation exchange chromatography fractions. We, thus, propose that sequential injections can be applied for fast and robust CE analysis of biopharmaceuticals.

Multiattribute Monitoring of Charge-Based Heterogeneity of Recombinant Monoclonal Antibodies Using 2D HIC-WCX-MS.

Charged heterogeneity of monoclonal antibody (mAb) products is regarded as a critical quality attribute (CQA) depending on its impact on the safety and efficacy profile of the product. Hence, manufacturers are expected to perform a comprehensive characterization of the charge heterogeneity to ensure that the manufactured product meets its specifications. Further, monitoring is also expected during the product lifecycle to demonstrate consistency in product quality. However, conventional analytical methods for characterization of hydrophobic and charge variants are nonvolatile salt-based and require manual fraction collection and desalting steps before analysis through mass spectrometry can be performed. In the present study, a workflow of a two-dimensional liquid chromatography method using mass spectrometry (MS)-compatible buffers coupled with native mass spectrometry was performed to characterize hydrophobic variants in the first dimension and charge variants in the second dimension without any need for manual fractionation. This novel two-dimensional (2D) hydrophobic interaction chromatography (HIC)-weak cation-exchange chromatography (WCX)-MS workflow identified 10 variants in mAb A, out of which 2 variants are exclusive to the 2D orthogonal method. Similarly, for mAb B, a total of 11 variants are identified, including 5 variants exclusive to the 2D orthogonal workflow. When compared to stand-alone, HIC resolved only 4 variants for both mAbs and WCX resolved 7 variants for mAb A and 6 variants for mAb B. In addition, the proposed method allows direct characterization of hydrophobic/charge variant peaks through native mass spectrometry in a single-run workflow.