The Lreu_1276 protein from Limosilactobacillus reuteri represents a third family of dihydroneopterin triphosphate pyrophosphohydrolases in bacteria.

Tetrahydrofolate is a cofactor involved in C1 metabolism including biosynthesis pathways for adenine and serine. In the classical tetrahydrofolate biosynthesis pathway, the steps removing three phosphate groups from the precursor 7,8-dihydroneopterin triphosphate (DHNTP) remain unclear in many bacteria. DHNTP pyrophosphohydrolase hydrolyzes pyrophosphate from DHNTP and produces 7,8-dihydroneopterin monophosphate. Although two structurally distinct DHNTP pyrophosphohydrolases have been identified in the intestinal bacteria Lactococcus lactis and Escherichia coli, the distribution of their homologs is limited. Here, we aimed to identify a third DHNTP pyrophosphohydrolase gene in the intestinal lactic acid bacterium Limosilactobacillus reuteri. In a gene operon including genes involved in dihydrofolate biosynthesis, we focused on the lreu_1276 gene, annotated as Ham1 family protein or XTP/dITP diphosphohydrolase, as a candidate encoding DHNTP pyrophosphohydrolase. The Lreu_1276 recombinant protein was prepared using E. coli and purified. Biochemical analyses of the reaction product revealed that the Lreu_1276 protein displays significant pyrophosphohydrolase activity toward DHNTP. The optimal reaction temperature and pH were 35°C and around 7, respectively. Substrate specificity was relatively strict among 17 tested compounds. Although previously characterized DHNTP pyrophosphohydrolases prefer Mg2+, the Lreu_1276 protein exhibited maximum activity in the presence of Mn2+, with a specific activity of 28.2 ± 2.0 µmol min-1 mg-1 in the presence of 1 mM Mn2+. The three DHNTP pyrophosphohydrolases do not share structural similarity to one another, and the distribution of their homologs does not overlap, implying that the Lreu_1276 protein represents a third structurally novel DHNTP pyrophosphohydrolase in bacteria. IMPORTANCE: The identification of a structurally novel DHNTP pyrophosphohydrolase in L. reuteri provides valuable information in understanding tetrahydrofolate biosynthesis in bacteria that possess lreu_1276 homologs. Interestingly, however, even with the identification of a third family of DHNTP pyrophosphohydrolases, there are still a number of bacteria that do not harbor homologs for any of the three genes while possessing other genes involved in the biosynthesis of the pterin ring structure. This suggests the presence of an unrecognized DHNTP pyrophosphohydrolase gene in bacteria. As humans do not harbor DHNTP pyrophosphohydrolase, the high structural diversity of enzymes responsible for a reaction in tetrahydrofolate biosynthesis may provide an advantage in designing inhibitors targeting a specific group of bacteria in the intestinal microbiota.

Nanoscale Adhesion and Material Transfer at 2D MoS2-MoS2 Interfaces Elucidated by In Situ Transmission Electron Microscopy and Atomistic Simulations.

Low-dimensional materials, such as MoS2, hold promise for use in a host of emerging applications, including flexible, wearable sensors due to their unique electrical, thermal, optical, mechanical, and tribological properties. The implementation of such devices requires an understanding of adhesive phenomena at the interfaces between these materials. Here, we describe combined nanoscale in situ transmission electron microscopy (TEM)/atomic force microscopy (AFM) experiments and simulations measuring the work of adhesion (Wadh) between self-mated contacts of ultrathin nominally amorphous and nanocrystalline MoS2 films deposited on Si scanning probe tips. A customized TEM/AFM nanoindenter permitted high-resolution imaging and force measurements in situ. The Wadh values for nanocrystalline and nominally amorphous MoS2 were 604 ± 323 mJ/m2 and 932 ± 647 mJ/m2, respectively, significantly higher than previously reported values for mechanically exfoliated MoS2 single crystals. Closely matched molecular dynamics (MD) simulations show that these high values can be explained by bonding between the opposing surfaces at defects such as grain boundaries. Simulations show that as grain size decreases, the number of bonds formed, the Wadh and its variability all increase, further supporting that interfacial covalent bond formation causes high adhesion. In some cases, sliding between delaminated MoS2 flakes during separation is observed, which further increases the Wadh and the range of adhesive interaction. These results indicate that for low adhesion, the MoS2 grains should be large relative to the contact area to limit the opportunity for bonding, whereas small grains may be beneficial, where high adhesion is needed to prevent device delamination in flexible systems.

Total Synthesis of Keramaphidin B and Ingenamine by Base-Catalyzed Diels-Alder Reaction Using Dynamic Regioselective Crystallization.

The control of the selectivity is a central issue in the total synthesis of complex natural products. In this paper, we report the total synthesis of (±)-keramaphidin B and (±)-ingenamine. The key reaction is a DMAP-catalyzed Diels-Alder reaction in which the regioselectivity is completely controlled by dynamic crystallization. Our synthesis successfully demonstrates that dynamic crystallization can be an alternative when the selectivity is not controlled by either kinetic or thermodynamic approaches in solution.

Stereodivergent synthesis of 2-oxo-oligopyrrolidines by an iterative coupling strategy.

Natural linear polyamines play diverse roles in physiological processes by interacting with receptors at the cellular level. Herein, we describe the stereodivergent synthesis of oligopyrrolidines, which are conformationally constrained polyamines. We synthesized dimeric and trimeric 2-oxo-oligopyrrolidines using an iterative coupling strategy. The key to our success is an iridium-catalyzed trans/cis-selective nucleophilic addition and subsequent threo/erythro-stereoselective reduction. The synthesized pyrrolidines show varying cytotoxicities against a human cancer cell line depending on the number of rings and their stereochemistry.

Removal of phosphoglycolate in hyperthermophilic archaea.

Many organisms that utilize the Calvin-Benson-Bassham (CBB) cycle for autotrophic growth harbor metabolic pathways to remove and/or salvage 2-phosphoglycolate, the product of the oxygenase activity of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco). It has been presumed that the occurrence of 2-phosphoglycolate salvage is linked to the CBB cycle, and in particular, the C2 pathway to the CBB cycle and oxygenic photosynthesis. Here, we examined 2-phosphoglycolate salvage in the hyperthermophilic archaeon Thermococcus kodakarensis, an obligate anaerobe that harbors a Rubisco that functions in the pentose bisphosphate pathway. T. kodakarensis harbors enzymes that have the potential to convert 2-phosphoglycolate to glycine and serine, and their genes were identified by biochemical and/or genetic analyses. 2-phosphoglycolate phosphatase activity increased 1.6-fold when cells were grown under microaerobic conditions compared to anaerobic conditions. Among two candidates, TK1734 encoded a phosphatase specific for 2-phosphoglycolate, and the enzyme was responsible for 80% of the 2-phosphoglycolate phosphatase activity in T. kodakarensis cells. The TK1734 disruption strain displayed growth impairment under microaerobic conditions, which was relieved upon addition of sodium sulfide. In addition, glycolate was detected in the medium when T. kodakarensis was grown under microaerobic conditions. The results suggest that T. kodakarensis removes 2-phosphoglycolate via a phosphatase reaction followed by secretion of glycolate to the medium. As the Rubisco in T. kodakarensis functions in the pentose bisphosphate pathway and not in the CBB cycle, mechanisms to remove 2-phosphoglycolate in this archaeon emerged independent of the CBB cycle.

Quality of epicardial adipose tissue predicts major adverse cerebral and cardiovascular events following transcatheter aortic valve implantation.

Epicardial adipose tissue (EAT) have been shown to be associated with several heart disease, including coronary artery disease (CAD), atrial fibrillation (AF), and heart failure (HF). It is reported that the quality of EAT, represented by fat attenuation determined using computed tomography (CT) imaging, can detect the histologically-assessed remodeled EAT. We tested the hypothesis that quality of EAT would predict major adverse cerebral and cardiovascular events (MACCE) following transcatheter aortic valve implantation (TAVI) in patients with aortic stenosis (AS). A total of 125 consecutive severe AS patients who underwent TAVI were enrolled (39 male, mean 85.4 ± 4.0 years). Using CT imaging before TAVI, we measured the average CT fat attenuation of EAT (EAT attenuation) and investigated the association with MACCE. During the mean follow up period of 567 ± 371 days, 21 cases of MACCE were observed. Patients with MACCE had greater levels of EAT attenuation compared to those without (- 74 ± 3.7 Hounsfield Units (HU) vs - 77 ± 5.5 HU, p = 0.010). Based on the ROC curves, the high EAT attenuation was defined as > - 74.3 HU. According to this cut-off index, 44 patients were classified into the high EAT attenuation group (28 female, mean age 87 ± 3.6 years), whereas 81 patients were classified into the low EAT attenuation group (13 female, 85 ± 4.1 years). Kaplan-Meier survival curve demonstrated that the patients in the high EAT attenuation group showed greater prevalence of MACCE (log-rank 6.64, p = 0.010). Cox proportional hazards regression analysis revealed that EAT attenuation and Logistic EuroSCORE were independently associated with the incidence of MACCE. Our results suggest that quality of EAT, assessed by EAT attenuation detected by CT imaging, can predict the cerebral and cardiovascular events after TAVI in patients with AS.

Cross-Sectional and Longitudinal Associations between Forearm Bone Mineral Density and Anthropometry in Adult Japanese Men and Women.

BACKGROUND: No consensus exists regarding which anthropometric measurements are related to bone mineral density (BMD), and this relationship may vary according to sex and age. A large Japanese cohort was analyzed to provide an understanding of the relationship between BMD and anthropometry while adjusting for known confounding factors. METHODS: Our cohort included 10,827 participants who underwent multiple medical checkups including distal forearm BMD scans. Participants were stratified into four groups according to age (≥50 years or <50 years) and sex. The BMD values were adjusted for confounding factors, after which single and partial correlation analyses were performed. The prevalence of osteopenia was plotted for each weight index (weight or body mass index [BMI]) class. RESULTS: Cross-sectional studies revealed that weight was more favorably correlated than BMI in the older group (R=0.278 and 0.212 in men and R=0.304 and 0.220 in women, respectively), whereas weight and BMI were weakly correlated in the younger age groups. The prevalence of osteopenia exhibited a negative linear relationship with weight among older women ≥50 years of age, and an accelerated increase was observed with decreasing weight in older men weighing <50 kg and younger women weighing <60 kg. When weight was replaced with BMI, the prevalence was low in most subgroups classified by weight. CONCLUSIONS: Weight, rather than BMI, was the most important indicator of osteopenia but it might not be predictive of future bone loss.

Total Synthesis of Lobatamides A and C.

The total synthesis of lobatamides A (1 a) and C (1 c) via a common bislactone intermediate is reported. The allylic aryl moiety including a trisubstituted Z-olefin was constructed by hydroboration of a 1,1-disubstituted allene and subsequent Migita-Kosugi-Stille coupling. Although the seco acid proved to be highly unstable even in the presence of weak bases, Zhao macrolactonization under acidic conditions via the α-acyloxyenamide successfully provided the common bislactone intermediate. Hydrozirconation-iodination of the terminal alkyne and subsequent copper-mediated coupling with primary amides proceeded successfully in the presence of the sensitive bislactone framework. The developed synthetic route enables the late-stage installation of enamide side chains, which are crucial structures for V-ATPase inhibition.

Hierarchical Emulsion Structure and Functionality Regulated by Coexisting Bicontinuous Microemulsion and Liquid Crystal Domains.

Since microemulsions are usually low viscosity fluids, enhanced rheological properties while maintaining their structure-derived functionality have long been desired from an industrial application point of view. However, for instance, it is practically difficult to thicken bicontinuous microemulsions (BCMEs) without perturbing their alternating domain structure or to emulsify oils using BCME having ultralow interfacial tension as an external phase. In this study, a methodology called a BCLC emulsification technique has been constructed to obtain oil-in-water emulsions stabilized by coexisting BCME and liquid crystal (LC) phases. The produced emulsions based on polyglyceryl-10 diisostearate, polyglyceryl-6 dicaprate, cetyl ethylhexanoate, and water are structurally scrutinized by means of small- and wide-angle X-ray scattering (SWAXS), freeze fracture transmission electron microscopy (FF-TEM), and scanning electron assisted dielectric microscopy (SE-ADM). The data provide experimental evidence that this methodology enables one to control the bending elasticity of the interfacial membranes and consequent long-range order of the BCME domains. Moreover, closely correlated with the interfacial membrane properties, submicrometer-sized fine oil droplets are supported by the LC networks and agglomerated into spongy or network-like phase-separation patterns. The resulting nonfluidic, jelly emulsions are particularly useful in cosmetics because of combined BCME-derived high cleansing performance and excellent usability owing to the enhanced viscosity. The thickening mechanisms are essentially different from those of common lamellar-gel-stabilized oil-in-water emulsions, which utilize crystalline lamellar gel networks as oil droplet stabilizers.

Microfabricated double-tilt apparatus for transmission electron microscope imaging of atomic force microscope probe.

Atomic force microscopy (AFM) uses a scanning stylus to directly measure the surface characteristics of a sample. Since AFM relies on nanoscale interaction between the probe and the sample, the resolution of AFM-based measurement is critically dependent on the geometry of the scanning probe tip. This geometry, therefore, can limit the development of related applications. However, AFM itself cannot be effectively used to characterize AFM probe geometry, leading researchers to rely on indirect estimates based on force measurement results. Previous reports have described sample jigs that enable the observation of AFM probe tips using Transmission Electron Microscopy (TEM). However, such setups are too tall to allow sample tilting within more modern high-resolution TEM systems, which can only tilt samples less than a few millimeters in thickness. This makes it impossible to observe atomic-scale crystallographic lattice fringes by aligning the imaging angle perfectly or to view a flat probe tip profile exactly from the side. We have developed an apparatus that can hold an AFM tip for TEM observation while remaining thin enough for tilting, thereby enabling atomic-scale tip characterization. Using this technique, we demonstrated consistent observation of AFM tip crystal structures using tilting in TEM and found that the radii of curvature of nominally identical probes taken from a single box varied widely from 1.4 nm for the sharpest to 50 nm for the most blunt.

The declining insulinogenic index correlates with inflammation and metabolic dysregulation in non-obese individuals assessed by blood gene expression.

AIMS: Diabetes onset is difficult to predict. Since decreased insulinogenic index (IGI) is observed in prediabetes, and blood gene expression correlates with insulin secretion, candidate biomarkers can be identified. METHODS: We collected blood from 96 participants (54 males, 42 females) in 2008 (age: 52.5 years) and 2016 for clinical and gene expression analyses. IGI was derived from values of insulin and glucose at fasting and at 30 min post-OGTT. Two subgroups were identified based on IGI variation: "Minor change in IGI" group with absolute value variation between -0.05 and +0.05, and "Decrease in IGI" group with a variation between -20 and -0.05. RESULTS: Following the comparison of "Minor change in IGI" and "Decrease in IGI" groups at time 0 (2008), we identified 77 genes correlating with declining IGI, related to response to lipid, carbohydrate, and hormone metabolism, response to stress and DNA metabolic processes. Over the eight years, genes correlating to declining IGI were related to inflammation, metabolic and hormonal dysregulation. Individuals with minor change in IGI, instead, featured homeostatic and regenerative responses. CONCLUSIONS: By blood gene expression analysis of non-obese individuals, we identified potential gene biomarkers correlating to declining IGI, associated to a pathophysiology of inflammation and metabolic dysregulation.

Iridium-Catalyzed Reductive (3+2) Annulation of Lactams Enabling the Rapid Total Synthesis of (±)-Eburnamonine.

A reductive (3+2) annulation of lactams through iridium-catalyzed hydrosilylation and photoredox coupling with α-bromoacetic acid was developed. The iridium-catalyzed hydrosilylation of the lactam carbonyl group and subsequent elimination provide a transient cyclic enamine, which undergoes iridium-catalyzed photoredox coupling with α-bromoacetic acid in a one-pot process. The developed conditions show high functional-group tolerance and provide cyclic N,O-acetals containing a quaternary carbon center. The resulting N,O-acetals undergo a variety of acid-mediated nucleophilic addition reactions via iminium ions to give substituted cyclic amines. The developed sequence including reductive (3+2) annulation and acid-mediated nucleophilic addition was successfully applied to the four-step total synthesis of (±)-eburnamonine.

Lifestyle Intervention With Smartphone App and isCGM for People at High Risk of Type 2 Diabetes: Randomized Trial.

AIMS: Although conventional interventions for people at high risk of developing type 2 diabetes are usually conducted face-to-face, such interventions are burdensome for health care providers. We developed a lifestyle intervention program combining lifestyle coaching via a smartphone application augmented by intermittently scanned continuous glucose monitoring without burdening health care providers. Its effectiveness for glycemic control and body weight reduction in people at risk of type 2 diabetes was investigated. MATERIALS AND METHODS: For this 12-week randomized unblinded trial with offline recruitment, participants with a hemoglobin A1c level of 5.6% to 6.4% or a fasting blood glucose of 110 to 125 mg/dL and body mass index (BMI) >23 kg/m2 but <40 kg/m2 were randomly assigned to the intervention group (App) and control group (C). The primary endpoint was the difference in time in range of blood glucose between 70 and 140 mg/dL (3.9-7.8 mmol/L) before and after the study period between the 2 groups. RESULTS: Among 168 patients (mean age, 48.1 years; mean BMI, 26.6 kg/m2; and male, 80.4%), 82 and 86 were assigned to the App group and C group, respectively. After 12 weeks, time in range of blood glucose at 70 to 140 mg/dL significantly improved in the App group compared with the C group (-2.6 minutes/day vs +31.5 minutes/day, P = .03). Changes in time above range did not differ, whereas time below range (blood glucose <70 mg/dL; +23.5 minutes/day vs -8.9 minutes/day, P = .02) improved in the App group. BMI (-0.26 vs -0.59, P = .017) was reduced in the App group compared with the C group. CONCLUSION: Intervention with a smartphone app and intermittently scanned continuous glucose monitoring increased glycemic control accompanied by decreased carbohydrate intake and weight loss. Further trials are needed to confirm whether these interventions can reduce incident type 2 diabetes.

Usefulness of New Criteria for Metabolic Syndrome Optimized for Prediction of Cardiovascular Diseases in Japanese.

AIMS: We attempted to clarify whether the multiple criteria for metabolic syndrome (MetS) can sufficiently predict cardiovascular disease, whether waist circumference (WC) should be required, and whether sex-specific thresholds for each component are necessary. Only a few large-scale studies among East Asians have addressed the ability of MetS to predict cardiovascular disease. METHODS: We analyzed the data of 330,051 men and 235,028 women aged 18-74 years with no history of coronary artery disease (CAD) or cerebrovascular disease (CVD) from a nationwide Japanese claims database accumulated during 2008-2016. The association of each MetS component with CAD or CVD (CAD/CVD), MetS associated with CAD/CVD according to various criteria, and utility of modified criteria with more specific optimal values for each component were examined using multivariate Cox regression and receiver operating characteristic (ROC) analysis. RESULTS: During the study, 3,934 men (1.19%) and 893 women (0.38%) developed CAD/CVD. For each current MetS criteria, there was a 1.3- to 2.9-fold increased risk of CAD/CVD. Optimal thresholds for predicting CAD/CVD were WCs of 83 and 77 cm, triglycerides levels of 130 and 90 mg/dl, high-density lipoprotein cholesterol levels of 50 and 65 mg/dl, blood pressures of 130/80 and 120/80 mmHg, and fasting plasma glucose levels of 100 and 90 mg/dl for men and women, respectively. The existing MetS criteria and modified criteria were not significantly different in predicting CAD/CVD, but using the modified criteria markedly increased the prevalence of MetS and percentage of people with MetS developing CAD/CVD. CONCLUSIONS: Although various criteria for MetS similarly predicted CAD/CVD, the new criteria greatly reduced the number of high-risk individuals, especially women, overlooked by the current criteria.

Effects of sleep quality on pain, cognitive factors, central sensitization, and quality of life in patients with chronic low back pain.

BACKGROUND: Sleep quality in patients with chronic low back pain (CLBP) may affect quality of life (QoL), possibly due to worsening pain, central sensitization (CS), and cognitive factors. However, causal relationship among the factors has not been confirmed yet. OBJECTIVE: The purpose of this study was to test the hypothesis that sleep quality in patients with CLBP is attributable to pain, cognitive factors, and CS, and influences QoL, by structural covariance analysis. METHODS: This is a cross-sectional study. Participants were recruited from six health care facilities and 101 patients with CLBP were included. Structural covariance analysis assessed the fit of data to the model using goodness of fit index (GFI), adjusted goodness of fit index (AGFI), comparative fit index (CFI), and mean squared approximation error (RMSEA). RESULTS: The structural covariance analysis showed that the goodness-of-fit indices were high (GFI = 0.993, AGFI = 0.964, CFI = 1.00, RMSEA < 0.01). Sleep quality was not directly influenced by QoL but rather by CS and cognitive factors. CONCLUSION: This study suggests that sleep quality in patients with CLBP is indirectly mediated through multiple pathways, including cognitive factors and CS, which may influence QoL.

Percutaneous tracheostomy in the surgical management of oral malignancy: an emerging standard of care.

Percutaneous tracheostomy insertion is commonly performed in the critical care setting. However, its applicability and safety in head and neck (H&N) surgery remains uncertain. This study aimed to compare complications and postoperative recovery for percutaneous tracheostomy versus surgical tracheostomy in H&N surgery. A total of 66 patients undergoing percutaneous tracheostomy as part of H&N microvascular surgery were identified retrospectively. A control cohort of 70 consecutive surgical tracheostomy cases performed by another surgical team in the same department was similarly determined. Generally, the complication rates in the percutaneous and surgical tracheostomy groups were similar, with overall rates being 42% and 31%, respectively. The percutaneous group experienced a higher rate of airway obstruction (15%), primarily due to tube displacement. Time to decannulation and duration of inpatient stay were similar in both groups. Notably, an analysis of tracheostomy tube displacement identified high body mass index (BMI) and bilateral neck dissection as potential risk factors, and all cases occurred on postoperative day one. To mitigate this risk we recommend implementation of a percutaneous tracheostomy management protocol, precise tube selection using preoperative imaging, and careful passage of the stoma intraoperatively. In conclusion, this study found that the percutaneous technique exhibited a similar complication profile. It remains unclear whether the rates of longer-term complications, such as delayed stoma healing and tracheal stenosis, differ between techniques. A future prospective study with appropriate elimination of selection and reporting bias would help address this and similar pertinent issues, including patients' perspectives.

Enfortumab Vedotin-induced Hyperglycemia and Ileal Conduit Reconstruction-induced Metabolic Acidosis.

We report a 76-year-old man who was treated for hyperglycemia and metabolic acidosis after chemotherapy with enfortumab vedotin and pembrolizumab administered after his surgery for bladder cancer. He had an approximately 20-year history of diabetes. His body mass index was 18.6, and he received metformin 1000 mg/day, sitagliptin 50 mg/day, mitiglinide 30 mg/day, and voglibose 0.6 mg/day with hemoglobin A1c was approximately 7%. He underwent total cystectomy and ileal conduit reconstruction. After relapse, he received chemotherapy but later developed hyperglycemia and metabolic acidosis. His hyperglycemia was caused by enfortumab vedotin, and metabolic acidosis was attributable to the ileocecal canal. These symptoms should be remembered as important complications of this standard treatment, which prompted this case report.

Effect of Attenuated Light Through Translucent Zirconia on the Interfacial Adaptation and Polymerization of Resin Cements.

PURPOSE: The first objective was to determine if dual-curing of resin cement with reduced light could affect interfacial adaptations of zirconia restoration. The second objective was to examine whether cement type and pretreatment method of universal adhesive affected interfacial adaptation. The final objective was to compare the polymerization degree of cement under different reduced-light conditions. MATERIALS AND METHODS: Inlay cavities were prepared on extracted third molars. Translucent zirconia restorations were milled using Katana UTML (Kuraray Noritake) in three groups with restoration thicknesses of 1, 2, and 3 mm, respectively. Each group had three subgroups using different cementation methods. For subgroup 1, restorations were cemented with self-adhesive cement. For subgroup 2, universal adhesive was applied and light cured. After the restoration was seated with conventional resin cement, light curing was performed. For subgroup 3, after adhesive was applied, the restoration was seated with conventional resin cement. Light curing was performed for the adhesive and cement simultaneously. After thermocycling, interfacial adaptation at the restoration-tooth interface was investigated using swept-source optical coherence tomography imaging. Finally, polymerization shrinkage of the cement was measured using a linometer and compared under the conditions of different zirconia thicknesses and light-curing durations. RESULTS: Interfacial adaptation varied signficantly depending on the zirconia thickness, pretreatment, polymerization mode and cements used (p < 0.05). The effects of the adhesive and polymerization shrinkage differed signficantly, depending on the reduced light under the zirconia (p < 0.05). CONCLUSION: Lower curing-light irradiance may lead to inferior adaptation and lower polymerization of the cement. Polymerization of resin cement can differ depending on the light irradiance and exposure duration.

Computational Study Focusing on a Comprehensive Conformational Analysis of Transition States for Aza-Spiro Ring Formations with N-Alkoxyamides.

An accurate understanding of conformations in transition states is a critical piece in the theoretical analysis of complex molecular reactions. In this study, we investigated conformationally diverse transition states during intramolecular aza-spiro ring formation with an allylsilane moiety and N-alkoxy iminium ion, a key reaction in the synthesis of fasicularin by Sato and Chida et al., and identified the origins of stereoselectivity of the cyclization. A large number of conformational isomers with forming C-C bonds were comprehensively analyzed using Cremer-Pople puckering parameters. It was found that the conformations of the transition states had different puckering preferences depending on the reactant's double-bond geometry and the product's stereochemical configuration. Furthermore, an asymmetric aza-spiro cyclization with a tolyl group as a chiral auxiliary was investigated, showing that conformational anchoring by both a CH-O hydrogen bond and the CH-π interaction was critical for the asymmetric induction.