Freeze-dried nanocrystal dispersion of novel deuterated pyrazoloquinolinone ligand (DK-I-56-1): Process parameters and lyoprotectant selection through the stability study.

Recently, nanocrystal dispersions have been considered as a promising formulation strategy to improve the bioavailability of the deuterated pyrazoloquinolinone ligand DK-I-56-1 (7­methoxy-2-(4­methoxy-d3-phenyl)-2,5-dihydro-3H-pyrazolo[4,3-c]quinolin-3-one). In the current study, the freeze-drying process (formulation and process parameters) was investigated to improve the storage stability of the previously developed formulation. Different combinations of lyoprotectant (sucrose or trehalose) and bulking agent (mannitol) were varied while formulations were freeze-dried under two conditions (primary drying at -10 or -45 °C). The obtained lyophilizates were characterized in terms of particle size, solid state properties and morphology, while the interactions within the samples were analyzed by Fourier transform infrared spectroscopy. In the preliminary study, three formulations were selected based on the high redispersibility index values (around 95%). The temperature of primary drying had no significant effect on particle size, but stability during storage was impaired for samples dried at -10 °C. Samples dried at lower temperature were more homogeneous and remained stable for three months. It was found that the optimal ratio of sucrose or trehalose to mannitol was 3:2 at a total concentration of 10% to achieve the best stability (particle size < 1.0 µm, polydispersity index < 0.250). The amorphous state of lyoprotectants probably provided a high degree of interaction with nanocrystals, while the crystalline mannitol provided an elegant cake structure. Sucrose was superior to trehalose in maintaining particle size during freeze-drying, while trehalose was more effective in keeping particle size within limits during storage. In conclusion, results demonstrated that the appropriate combination of sucrose/trehalose and mannitol together with the appropriate selection of lyophilization process parameters could yield nanocrystals with satisfactory stability.

Parenteral Lipid-Based Nanoparticles for CNS Disorders: Integrating Various Facets of Preclinical Evaluation towards More Effective Clinical Translation.

Contemporary trends in combinatorial chemistry and the design of pharmaceuticals targeting brain disorders have favored the development of drug candidates with increased lipophilicity and poorer water solubility, with the expected improvement in delivery across the blood-brain barrier (BBB). The growing availability of innovative excipients/ligands allowing improved brain targeting and controlled drug release makes the lipid nanocarriers a reasonable choice to overcome the factors impeding drug delivery through the BBB. However, a wide variety of methods, study designs and experimental conditions utilized in the literature hinder their systematic comparison, and thus slows the advances in brain-targeting by lipid-based nanoparticles. This review provides an overview of the methods most commonly utilized during the preclinical testing of liposomes, nanoemulsions, solid lipid nanoparticles and nanostructured lipid carriers intended for the treatment of various CNS disorders via the parenteral route. In order to fully elucidate the structure, stability, safety profiles, biodistribution, metabolism, pharmacokinetics and immunological effects of such lipid-based nanoparticles, a transdisciplinary approach to preclinical characterization is mandatory, covering a comprehensive set of physical, chemical, in vitro and in vivo biological testing.

Efficient Development of Green Emulsifier/Emollient-Based Emulsion Vehicles: From RSM Optimal Experimental Design to Abridged In Vivo Assessment.

Since natural-origin, sustainable ingredients are preferred by modern consumers, novel emulsifiers and emollients keep entering the market. This study hypothesizes that a combination of in silico, instrumental tools and simplified sensory studies could be used to efficiently characterize emulsions in a shorter timeframe. A total of 22 rather simple o/w emulsions were prepared by a time/energy-saving emulsification process. A natural mixed emulsifier (Lauryl Glucoside/Myristyl Glucoside/Polyglyceryl-6 Laurate) and two emollients (both with INCI name C15-19 Alkane) were used. The performed D-optimal experimental design within the response surface method (RSM) significantly narrowed down the number of samples about to enter the stage of texture, friction and sensory studies to the samples comprising 30% of a respective Emogreen emollient and 2% or 3% of the emulsifier. The sample comprising 2% emulsifier/30% Emogreen® L15 showed significantly higher firmness (42.12 mN) when compared to the one with 2% emulsifier/30% Emogreen® L19 (33.62 mN), which was somewhat unexpected considering the emollients' inherent viscosity values (4.5 mPa·s for L15 and 9 mPa·s for L19). The sample with 2% emulsifier/30% Emogreen® L19 managed to maintain the lowest friction, while the one with 3% emulsifier/30% Emogreen® L19 released its full lubricating potential in the second part of the measurement (30-60 s). The obtained results revealed the strengths and weaknesses of each formulation, narrowing down their possible applications in the early development stage.

High amount of lecithin facilitates oral delivery of a poorly soluble pyrazoloquinolinone ligand formulated in lipid nanoparticles: Physicochemical, structural and pharmacokinetic performances.

Preclinical development of deuterated pyrazoloquinolinone ligands, promising drug candidates for various neuropsychiatric disorders, was hindered by unusually low solubility in water and oils. DK-I-60-3 (7-methoxy-d3-2-(4-methoxy-d3-phenyl)-2,5-dihydro-3Hpyrazolo[4,3-c]quinolin-3-one) is one of such pyrazoloquinolinones, and we recently reported about increased oral bioavailability of its nanocrystal formulation (NC). Lipid nanoparticles (LNP) with a high concentration of lecithin, which enhances loading capacity of the lipid matrix, may give rise to further improvement. After preformulation studies by differential scanning calorimetry and polarized light microscopy, LNP were prepared by the hot high pressure homogenization, and characterized in terms of particle size, morphology, and encapsulation efficacy. The layered structure visible on atomic force micrographs was confirmed by nuclear magnetic resonance. Obtained formulations were desirably stable, with small particle size (<100 nm), and high encapsulation efficacy (>99 %). Lecithin was partially fluid and most probably located in the outer shell of the particle, together with DK-I-60-3. While the hydrophobic part of polysorbate 80 was completely immobilized, its hydrophilic part was free in the aqueous phase. In oral neuropharmacokinetic study in rats, an around 1.5-fold increase of area under the curve with LNP compared to NC was noticed both in brain and plasma. In bioavailability study, F value of LNP (34.7 ± 12.4 %) was 1.4-fold higher than of NC (24.5 ± 7.8 %); however, this difference did not reach statistical significance. Therefore, employment of LNP platform in preclinical formulation of DK-I-60-3 imparted an incremental improvement of its physicochemical as well as pharmacokinetic behavior.

The Impact of the Oil Phase Selection on Physicochemical Properties, Long-Term Stability, In Vitro Performance and Injectability of Curcumin-Loaded PEGylated Nanoemulsions.

A nanotechnology-based approach to drug delivery presents one of the biggest trends in biomedical science that can provide increased active concentration, bioavailability, and safety compared to conventional drug-delivery systems. Nanoemulsions stand out amongst other nanocarriers for being biodegradable, biocompatible, and relatively easy to manufacture. For improved drug-delivery properties, longer circulation for the nanoemulsion droplets should be provided, to allow the active to reach the target site. One of the strategies used for this purpose is PEGylation. The aim of this research was assessing the impact of the oil phase selection, soybean or fish oil mixtures with medium chain triglycerides, on the physicochemical characteristics and injectability of curcumin-loaded PEGylated nanoemulsions. Electron paramagnetic resonance spectroscopy demonstrated the structural impact of the oil phase on the stabilizing layer of nanoemulsions, with a more pronounced stabilizing effect of curcumin observed in the fish oil nanoemulsion compared to the soybean oil one. The design of the experiment study, employed to simultaneously assess the impact of the oil phase, different PEGylated phospholipids and their concentrations, as well as the presence of curcumin, showed that not only the investigated factors alone, but also their interactions, had a significant influence on the critical quality attributes of the PEGylated nanoemulsions. Detailed physicochemical characterization of the NEs found all formulations were appropriate for parenteral administration and remained stable during two years of storage, with the preserved antioxidant activity demonstrated by DPPH and FRAP assays. In vitro release studies showed a more pronounced release of curcumin from the fish oil NEs compared to that from the soybean oil ones. The innovative in vitro injectability assessment, designed to mimic intravenous application, proved that all formulations tested in selected experimental setting could be employed in prospective in vivo studies. Overall, the current study shows the importance of oil phase selection when formulating PEGylated nanoemulsions.

Overcoming the Low Oral Bioavailability of Deuterated Pyrazoloquinolinone Ligand DK-I-60-3 by Nanonization: A Knowledge-Based Approach.

Poor water solubility of new chemical entities is considered as one of the main obstacles in drug development, as it usually leads to low bioavailability after administration. To overcome these problems, the selection of the appropriate formulation technology needs to be based on the physicochemical properties of the drug and introduced in the early stages of drug research. One example of the new potential drug substance with poor solubility is DK-I-60-3, deuterated pyrazoloquinolinone, designed for the treatment of various neuropsychiatric disorders. In this research, based on preformulation studies, nanocrystal technology was chosen to improve the oral bioavailability of DK-I-60-3. Nanocrystal dispersions stabilized by sodium lauryl sulfate and polyvinylpyrrolidone were prepared by modified wet media milling technique, with the selection of appropriate process and formulation parameters. The nanoparticles characterization included particle size and zeta potential measurements, differential scanning calorimetry, X-ray powder diffraction, dissolution and solubility study, and in vivo pharmacokinetic experiments. Developed formulations had small uniform particle sizes and were stable for three months. Nanonization caused decreased crystallite size and induced crystal defects formation, as well as a DK-I-60-3 solubility increase. Furthermore, after oral administration of the developed formulations in rats, two to three-fold bioavailability enhancement was observed in plasma and investigated organs, including the brain.

Curcumin Loaded PEGylated Nanoemulsions Designed for Maintained Antioxidant Effects and Improved Bioavailability: A Pilot Study on Rats.

The current study describes the experimental design guided development of PEGylated nanoemulsions as parenteral delivery systems for curcumin, a powerful antioxidant, as well as the evaluation of their physicochemical characteristics and antioxidant activity during the two years of storage. Experimental design setup helped development of nanoemulsion templates with critical quality attributes in line with parenteral application route. Curcumin-loaded nanoemulsions showed mean droplet size about 105 nm, polydispersity index <0.15, zeta potential of -40 mV, and acceptable osmolality of about 550 mOsm/kg. After two years of storage at room temperature, all formulations remained stable. Moreover, antioxidant activity remained intact, as demonstrated by DPPH (IC50 values 0.078-0.075 mg/mL after two years) and FRAPS assays. In vitro release testing proved that PEGylated phospholipids slowed down the curcumin release from nanoemulsions. The nanoemulsion carrier has been proven safe by the MTT test conducted with MRC-5 cell line, and effective on LS cell line. Results from the pharmacokinetic pilot study implied the PEGylated nanoemulsions improved plasma residence of curcumin 20 min after intravenous administration, compared to the non-PEGylated nanoemulsion (two-fold higher) or curcumin solution (three-fold higher). Overall, conclusion suggests that developed PEGylated nanoemulsions present an acceptable delivery system for parenteral administration of curcumin, being effective in preserving its stability and antioxidant capacity at the level highly comparable to the initial findings.

'All-natural' anti-wrinkle emulsion serum with Acmella oleracea extract: A design of experiments (DoE) formulation approach, rheology and in vivo skin performance/efficacy evaluation.

OBJECTIVE: The growing consumers' preferences and concerns regarding healthy ageing, youthful skin appearance, environmental protection and sustainability have triggered an ever-increasing trend towards natural, eco-friendly and ethically sourced anti-ageing products. Accordingly, this paper describes design and evaluation of novel, safe, effective and high-quality emulsion serums, completely based on ingredients of natural origin, intended for improving facial fine lines and wrinkles. METHODS: Model formulations, stabilized by an innovative glycolipid mixed emulsifier (lauryl glucoside/myristyl glucoside/polyglyceryl-6 laurate) and containing Acmella oleracea extract as a model anti-ageing active, were prepared by cold process and fully assessed regarding their rheological behaviour (continuous rotational and oscillatory tests) and physical stability (dynamic-mechanical thermoanalysis - DMTA test). To study and optimize the simultaneous influence of varied formulation factors (emollients and emulsifier concentrations) on critical rheological attributes of the developed serums, a central composite design within 'design of experiments' approach was employed. The general skin performance - preliminary safety and anti-wrinkle efficacy of selected model serum, was evaluated in human volunteers, by employing several objective, non-invasive bioengineering techniques. RESULTS: Rheological characterization revealed favourable shear-thinning flow behaviour with yield point, and dominating elastic character (storage modulus G' > loss modulus G") in both amplitude and frequency sweeps, which together with relatively small structural change obtained in DMTA test indicated overall satisfying rheological and stability properties of formulated serums. From the established design space, and taking into account formulation cost and carbon footprint, promising model serum (desired/optimal apparent viscosity, yield point and loss factor, rather small and constant structural change), containing 15% of emollients and 1% of emulsifier, was chosen for in vivo evaluations. Screening of skin irritation effects revealed the absence of potential irritancy of investigated serum, suggesting overall satisfying skin tolerability/preliminary safety. Silicone skin replica image analysis demonstrated noticeable reduction/improvement in all measured skin wrinkle parameters after only 2 weeks of test serum application in periorbital and perioral areas, indicating its rapid and beneficial effects on the facial expression lines and wrinkles. CONCLUSION: Altogether, the results corroborate the promising potential of the developed Acmella oleracea extract-loaded emulsion serum as safe, effective and non-invasive natural anti-wrinkle product.

OBJECTIF: Les préférences et les préoccupations croissantes des consommateurs concernant le vieillissement sain, l'apparence jeune de la peau, la protection de l'environnement et la durabilité ont déclenché une tendance toujours croissante vers des produits anti-âge naturels, respectueux de l'environnement et éthiques. En conséquence, ce document décrit le plan et l'évaluation de nouveaux sérums d'émulsion sûrs, efficaces et de haute qualité, entièrement basés sur des ingrédients d'origine naturelle, destinés à améliorer les ridules et rides du visage. MÉTHODES: Des formulations modèles stabilisées par un émulsifiant mixte glycolipide innovant (lauryl glucoside/myristyl glucoside/polyglycéryl-6 laurate) et contenant de l'extrait d'Acmella oleracea comme anti-vieillissement actif de modèle, ont été préparées par un procédé à froid et ont été pleinement évaluées en ce qui concerne leur comportement rhéologique (tests de rotation continue et examens oscillatoires) et stabilité physique (analyse thermomécanique dynamique - DMTA). Pour étudier et optimiser l'influence simultanée de facteurs de formulation variés (concentrations d'émollients et d'émulsifiants) sur les attributs rhéologiques critiques des sérums développés, une conception composite centrale dans le cadre d'une approche « conception d'expériences ¼ a été employée. Les performances cutanées générales - sécurité préliminaire et efficacité antirides du sérum du modèle sélectionné ont été évaluées chez des sujets humains volontaires, en utilisant plusieurs techniques de bio-ingénierie objectives et non invasives. RÉSULTATS: La caractérisation rhéologique a révélé un comportement favorable du débit de cisaillement avec une limite de rendement et une domination du caractère élastique (modulus de stockage G' > module de perte G) dans les balayages d'amplitude et de fréquence, qui, avec un changement structurel relativement faible obtenu dans l'analyse DMTA, a indiqué des propriétés rhéologiques et de stabilité satisfaisante globales des sérums. A partir de l'espace de conception établi, et en tenant compte du coût de composition et de l'empreinte carbone, un sérum modèle prometteur (viscosité apparente souhaitée/optimale, seuil de rendement et facteur de perte, changement structurel assez faible et constant), contenant 15 % d'émollients et 1 % d'émulsifiant, a été choisi pour les évaluations in vivo. Le dépistage des effets d'irritation cutanée a révélé l'absence d'irritation potentielle du sérum expérimental, suggérant une tolérance cutanée/une sécurité préliminaire globalement satisfaisante. L'analyse de l'image de la réplique cutanée en silicone a démontré une réduction/amélioration notable de tous les paramètres de rides cutanées mesurés après seulement deux semaines d'application du sérum test dans les zones périorbitaires et péribuccales, indiquant ses effets rapides et bénéfiques sur les lignes d'expression et les rides du visage. CONCLUSION: Au total, les résultats corroborent le potentiel prometteur du sérum d'émulsion à base d'extrait d'Acmella oleracea développé comme un produit anti-rides naturel sûr, efficace et non invasif.

Nanocrystal dispersion of DK-I-56-1, a poorly soluble pyrazoloquinolinone positive modulator of α6 GABAA receptors: Formulation approach toward improved in vivo performance.

DK-I-56-1 (7­methoxy­2-(4­methoxy­d3-phenyl)-2,5-dihydro-3H-pyrazolo[4,3-c]quinolin-3-one), a recently developed deuterated pyrazoloquinolinone, has been recognized as a lead candidate for treatment of various neuropsychiatric disorders. During preclinical investigation of poorly water-soluble compounds such as DK-I-56-1, the application of nanotechnology could be advantageous due to improved safety and possibly increased bioavailability of nanosized formulation. DK-I-56-1 nanosuspensions stabilized by polysorbate 80, alone or in combination with poloxamers 188 i.e. 407 or d-α-tocopheryl polyethylene glycol 1000 succinate, were prepared using a small-scale media milling device. With particle size 208.7-250.6 nm and polydispersity index <0.250, selected nanodiseprsions were stable for three weeks. Pharmacokinetic and biodistribution studies following intraperitoneal administration of three types of formulation in mice indicated high plasma DK-I-56-1 levels after solution (10,228.6 ±â€¯1037.2 ngh/ml) and nanosuspension (6770.4 ±â€¯770.7 ngh/ml) but not suspension administration (966.0 ±â€¯58.1 ngh/ml). However, distribution of DK-I-56-1 after solution was heavily influenced by its composition, and brain availability of nanosuspension was superior to that of solution formulation. In spontaneous locomotor activity test, the expected hyperlocomotor effect was observed after nanosuspension administration, without compromising impact of the vehicle/excipients used. Therefore, nanonization of drug compound assembled with proper selection of stabilizers may seemingly contribute further thorough testing of DK-I-56-1 preclinical efficacy.

Low-energy nanoemulsions as carriers for red raspberry seed oil: Formulation approach based on Raman spectroscopy and textural analysis, physicochemical properties, stability and in vitro antioxidant/ biological activity.

Considering a growing demand for medicinal/cosmetic products with natural actives, this study focuses on the low-energy nanoemulsions (LE-NEs) prepared via the Phase inversion composition (PIC) method at room temperature as potential carriers for natural oil. Four different red raspberry seed oils (ROs) were tested, as follows: cold-pressed vs. CO2-extracted, organic vs. non-organic, refined vs. unrefined. The oil phase was optimized with Tocopheryl acetate and Isostearyl isostearate, while water phase was adjusted with either glycerol or an antioxidant hydro-glycolic extract. This study has used a combined approach to formulation development, employing both conventional methods (pseudo-ternary phase diagram - PTPD, electrical conductivity, particle size measurements, microscopical analysis, and rheological measurements) and the methods novel to this area, such as textural analysis and Raman spectroscopy. Raman spectroscopy has detected fine differences in chemical composition among ROs, and it detected the interactions within nanoemulsions. It was shown that the cold-pressed, unrefined, organic grade oil (RO2) with 6.62% saturated fatty acids and 92.25% unsaturated fatty acids, was optimal for the LE-NEs. Textural analysis confirmed the existence of cubic gel-like phase as a crucial step in the formation of stable RO2-loaded LE-NEs, with droplets in the narrow nano-range (125 to 135 nm; PDI ≤ 0.1). The DPPH test in methanol and ABTS in aqueous medium have revealed a synergistic free radical scavenging effect between lipophilic and hydrophilic antioxidants in LE-NEs. The nanoemulsion carrier has improved the biological effect of raw materials on HeLa cervical adenocarcinoma cells, while exhibiting good safety profile, as confirmed on MRC-5 normal human lung fibroblasts. Overall, this study has shown that low-energy nanoemulsions present very promising carriers for topical delivery of natural bioactives. Raman spectroscopy and textural analysis have proven to be a useful addition to the arsenal of methods used in the formulation and characterization of nanoemulsion systems.

Dynamic-mechanical thermoanalysis test as a high-performance alternative for accelerated freeze-thaw stability testing: a case study of O/W emulsions.

Objective: The main objective of this work was to evaluate the performance of recently developed dynamic-mechanical thermoanalysis (DMTA) test as a rapid rheological alternative to conventional freeze-thaw cycling for accelerated stability testing of oil-in-water (O/W) emulsions.Significance: The rational for this approach was reducing the time needed for product and process development and optimization, potentially through shortening the time needed for stability evaluation, in order to keep the pace with high formulating turnover imposed by increasing demands for placing products on the market, that is, to facilitate decision making in R&D and QC settings.Methods: Six model O/W emulsions were designed, rheologically characterized (continuous rotational and oscillatory tests), and subjected to stability evaluation through freeze-thaw test in stability chamber and DMTA tests using an air-bearing rheometer.Results: Investigated samples were characterized by favorized shear-thinning flow behavior with yield point. The elastic behavior dominated the viscous one in the LVE region of amplitude sweeps, as well as in the frequency sweeps of used frequency range. Statistical method comparison studies demonstrated that the results obtained by freeze-thaw test, routinely used for accelerated stability testing of emulsions, were in good accordance with those obtained with DMTA tests, whereas the time needed for stability assessment was significantly reduced (2-6 h versus 12 days).Conclusions: In summary, DMTA test proved to be an expeditious alternative for accelerated freeze-thaw stability testing of O/W emulsions, with great promise in new product development and optimization (R&D), as well as in determination of borderline product batches status (QC).

Dynamic-mechanical thermoanalysis test: a rapid alternative for accelerated freeze-thaw stability evaluation of W/O emulsions.

Objective: The aim of this study was to develop a new dynamic-mechanical thermoanalysis (DMTA) test and evaluate its performance as rapid rheological alternative to routinely used freeze-thaw test for accelerated stability testing of water-in-oil (W/O) emulsions.Significance: Due to inherent emulsion instability and versatilities of storage and use conditions, stability assessment of emulsion products still remains complex and challenging task. Recommended stability evaluation protocols are time-consuming, imposing need for alternate test procedures, especially in the early stage of product development, as well as in the quality assurance setting, including quality control.Methods: Five model W/O emulsions were prepared, comprehensively rheologically characterized (continual and oscillatory tests), and subjected to stability evaluation through freeze-thaw test in stability chamber and DMTA tests using an air-bearing rheometer.Results: Analyzed emulsions displayed desired shear-thinning flow behavior with yield point. The storage modulus dominated over the loss modulus in the linear viscoelastic regions of amplitude sweeps, as was the case in frequency sweeps over entire frequency range. Statistical comparison showed good agreement between freeze-thaw test, as a method available and used in daily routine work for accelerated evaluation of the physical stability, and DMTA test, as a rheological simulation of the said routine method. Duration of DMTA test was significantly shorter compared to routine but lengthy freeze-thaw test (3.5 h versus 12 days).Conclusions: According to our results, DMTA test could be a rapid alternative for accelerated freeze-thaw stability evaluation of W/O emulsions, thus enabling high formulating turnover and decision making in R&D and QC departments.

Parenteral nanoemulsions of risperidone for enhanced brain delivery in acute psychosis: Physicochemical and in vivo performances.

This work aimed to deepen the lately acquired knowledge about parenteral nanoemulsions as carriers for brain delivery of risperidone, a poorly water-soluble antipsychotic drug, through establishing the prospective relationship between their physicochemical, pharmacokinetic, biodistribution, and behavioral performances. For this purpose, two optimized risperidone-loaded nanoemulsions, stabilized by lecithin or lecithin/polysorbate 80 mixture, and costabilized by sodium oleate, were produced by high-pressure homogenization. The characterization revealed the favorable droplet size, narrow size distribution, high surface charge, with proven stability to autoclaving and long-term stability for at least one year at 25±2°C. Pharmacokinetic and tissue distribution results demonstrated improved plasma, liver, and brain pharmacokinetic parameters, resulting in 1.2-1.5-fold increased relative bioavailability, 1.1-1.8-fold decreased liver distribution, and about 1.3-fold improved brain uptake of risperidone active moiety following intraperitoneal administration of nanoemulsions relative to solution in rats. In behavioral study, investigated nanoemulsions showed pronounced reduction in basal and, more pertinently, amphetamine-induced locomotor activity in rats, with an early onset of antipsychotic action, and this effect lasted at least 90min after drug injection. Together, these findings corroborate the applicability of parenteral nanoemulsions as carriers for enhanced brain delivery of risperidone, further suggesting their promise in acute psychosis treatment or other emergency situations.

Ex vivo skin permeation and penetration of nonivamide from and in vivo skin tolerability of film-forming formulations containing porous silica.

AIM: The purpose of this study was to evaluate skin permeation and penetration of nonivamide which has been formulated in novel film-forming formulations (FFFs). These formulations aim to prolong the availability of capsaicinoids which are used in long-term treatment of chronic pruritus. METHODS: An oily solution of nonivamide was loaded into porous silica particles which then were suspended in an aqueous dispersion of a sustained release polymer. Permeation and penetration experiments were performed ex vivo with postauricular porcine skin using modified Franz diffusion cells. The penetrated drug amount was assessed ex vivo by skin surface biopsy followed by cryo-sectioning. Furthermore, in vivo skin irritation experiments were performed to compare the potential skin irritation caused by the FFFs to conventionally used semi-solid formulations. RESULTS: Permeation rates of nonivamide from FFF through the skin are comparable to that from clinically used immediate release formulations. This elucidates the therapeutic safety profile of the novel FFF. Penetration studies confirmed the prolonged drug availability at the site of action. FFFs were found not to irritate the skin of healthy volunteers. CONCLUSION: FFFs with sustained nonivamide penetration represent safe and easy-to-use formulations. They therefore may improve the treatment of chronic pruritus with capsaicinoids by enhancing patient compliance through a sustained release regime.

Alkyl polyglucoside vs. ethoxylated surfactant-based microemulsions as vehicles for two poorly water-soluble drugs: physicochemical characterization and in vivo skin performance.

Two types of biocompatible surfactants were evaluated for their capability to formulate skin-friendly/non-irritant microemulsions as vehicles for two poorly water-soluble model drugs differing in properties and concentrations: alkyl polyglucosides (decyl glucoside and caprylyl/capryl glucoside) and ethoxylated surfactants (glycereth-7-caprylate/ caprate and polysorbate 80). Phase behavior, structural inversion and microemulsion solubilization potential for sertaconazole nitrate and adapalene were found to be highly dependent on the surfactants structure and HLB value. Performed characterization (polarized light microscopy, pH, electrical conductivity, rheological, FTIR and DSC measurements) indicated a formulation containing glycereth- 7-caprylate/caprate as suitable for incorporation of both drugs, whereas alkyl polyglucoside-based systems did not exhibit satisfying solubilization capacity for sertaconazole nitrate. Further, monitored parameters were strongly affected by sertaconazole nitrate incorporation, while they remained almost unchanged in adapalene-loaded vehicles. In addition, results of the in vivo skin performance study supported acceptable tolerability for all investigated formulations, suggesting selected microemulsions as promising carriers worth exploring further for effective skin delivery of model drugs.

Sucrose esters as biocompatible surfactants for penetration enhancement: An insight into the mechanism of penetration enhancement studied using stratumcorneum model lipids and Langmuir monolayers.

Up to now, the molecular mechanism of the penetration enhancing effect of sucrose esters (SEs) on stratumcorneum (SC) has not been explained in details. In this study, variety of surface sensitive techniques, including surface pressure-area (π-A) isotherms, infrared reflection-absorption spectroscopy (IRRAS), and Brewster angle microscopy (BAM), have been used to investigate interactions between SEs and SC intercellular lipids. A monolayer of the mixture of ceramide AS C18:18, stearic acid and cholesterol in the molar ratio of 1:1:0.7 on an aqueous subphase is a good model to mimic a single layer of intercellular SC lipids. The π-A isotherms of mixed monolayers and parameters derived from the curves demonstrated the interaction between nonionic surfactants such as SEs and SC lipids. With increasing SE concentration, the resultant monolayer films became more fluid and better compressible. IRRAS measurements showed that SEs disordered the acyl chains of SC lipids, and the BAM images demonstrated the modification of the domain structures in SC monolayers. Longer chain-SE has a stronger disordering effect and is better miscible with ceramides in comparison to SE with a shorter hydrophobic part. In conclusion, this study demonstrates the disordering effect of SEs on the biomimetic SC model, pointing out that small changes in the structure of surfactant may have a strong influence on a penetration enhancement of lipophilic drugs through intercellular lipids of skin.

Biocompatible microemulsions of a model NSAID for skin delivery: A decisive role of surfactants in skin penetration/irritation profiles and pharmacokinetic performance.

To elaborate the decisive role of surfactants in promotion of aceclofenac' skin absorption, potentially avoiding irritation, we developed non-ionic microemulsions varying natural or synthetic surfactants: sucrose esters (laurate or myristate) vs. polysorbate 80. A comprehensive physicochemical characterization indicated no significant influence of the solubilized nonsteroidal anti-inflammatory drug on the bicontinuous structure of blank formulations. To evaluate skin tolerability of isopropyl alcohol, a sucrose ester-based microemulsion containing transcutol P as a cosurfactant was also developed. The measured skin parameters strongly depended on the (co)surfactant type, showing higher compatibility of the microemulsions containing sucrose ester and isopropyl alcohol. In vitro release results, in vivo tape stripping and pharmacokinetics in rats confirmed superiority of the sucrose ester- over polysorbate-based microemulsions (total amounts of aceclofenac penetrated 60.81±5.97 and 60.86±3.67 vs. 27.00±5.09µg/cm(2), and its maximum plasma concentrations 275.57±109.49 and 281.31±76.76 vs. 150.23±69.74ng/ml for sucrose laurate- and myristate- vs. polysorbate 80-based microemulsions, respectively). Hence, sugar-based excipients increased delivery of aceclofenac through stratum corneum by increasing its fluidity, showing overall more satisfying safety profiles. In conclusion, sucrose ester-based microemulsions proved to be promising carriers for dermal/transdermal aceclofenac delivery.

Parenteral nanoemulsions as promising carriers for brain delivery of risperidone: Design, characterization and in vivo pharmacokinetic evaluation.

This paper describes design and evaluation of parenteral lecithin-based nanoemulsions intended for brain delivery of risperidone, a poorly water-soluble psychopharmacological drug. The nanoemulsions were prepared through cold/hot high pressure homogenization and characterized regarding droplet size, polydispersity, surface charge, morphology, drug-vehicle interactions, and physical stability. To estimate the simultaneous influence of nanoemulsion formulation and preparation parameters--co-emulsifier type, aqueous phase type, homogenization temperature--on the critical quality attributes of developed nanoemulsions, a general factorial experimental design was applied. From the established design space and stability data, promising risperidone-loaded nanoemulsions (mean size about 160 nm, size distribution <0.15, zeta potential around -50 mV), containing sodium oleate in the aqueous phase and polysorbate 80, poloxamer 188 or Solutol(®) HS15 as co-emulsifier, were produced by hot homogenization and their ability to improve risperidone delivery to the brain was assessed in rats. Pharmacokinetic study demonstrated erratic brain profiles of risperidone following intraperitoneal administration in selected nanoemulsions, most probably due to their different droplet surface properties (different composition of the stabilizing layer). Namely, polysorbate 80-costabilized nanoemulsion showed increased (1.4-7.4-fold higher) risperidone brain availability compared to other nanoemulsions and drug solution, suggesting this nanoemulsion as a promising carrier worth exploring further for brain targeting.

Experimental design in formulation of diazepam nanoemulsions: physicochemical and pharmacokinetic performances.

With the aid of experimental design, we developed and characterized nanoemulsions for parenteral drug delivery. Formulations containing a mixture of medium-chain triglycerides and soybean oil as oil phase, lecithin (soybean/egg) and polysorbate 80 as emulsifiers, and 0.1 M phosphate buffer solution (pH 8) as aqueous phase were prepared by cold high-pressure homogenization. To study the effects of the oil content, lecithin type, and the presence of diazepam as a model drug and their interactions on physicochemical characteristics of nanoemulsions, a three factor two-level full factorial design was applied. The nanoemulsions were evaluated concerning droplet size and size distribution, surface charge, viscosity, morphology, drug-excipient interactions, and physical stability. The characterization revealed the small spherical droplets in the range 195 -220 nm with polydispersity index below 0.15 and zeta potential between -30 and - 60 mV. Interactions among the investigated factors, rather than factors alone, were shown to more profoundly affect nanoemulsion characteristics. In vivo pharmacokinetic study of selected diazepam nanoemulsions with different oil content (20%, 30%, and 40%, w/w) demonstrated fast and intense initial distribution into rat brain of diazepam from nanoemulsions with 20% and 30% (w/w) oil content, suggesting their applicability in urgent situations.

Influence of the preparation procedure and chitosan type on physicochemical properties and release behavior of alginate-chitosan microparticles.

BACKGROUND: The potential for use of chitosan-treated alginate microparticles as a vehicle for oral phenytoin delivery has not been thoroughly exploited. AIM: We studied the influence of preparation procedure and chitosan type on physicochemical properties and release behavior of alginate-chitosan microparticles. METHOD: The total number of 24 microparticles formulations prepared by varying contents of calcium gelling ions and varying contents and type of chitosan was examined. As an additional variable, two different hardening times (1 and 24 hours) were employed. Possible interactions of components, surface morphology of microparticles as well as release profile of phenytoin were studied. RESULTS: Both series of formulations with regard to hardening times, irrespective of the chitosan type and/or concentration employed appeared to be highly loaded with the model drug (above 90%). The drug release studies showed that the kinetics of phenytoin cannot be straightforwardly predicted based on the molecular weight of chitosan alone. On the other hand, prolonging the hardening time from 1 to 24 hours had significantly improved phenytoin kinetics, and gave rise to a formulation with the liberation half-time of about 2.5 hours. CONCLUSION: This study showed that the latter formulation is eligible for further modifications aimed at improving the regularity of phenytoin absorption.