RESUMEN
Bipolar plates, a critical component of proton exchange membrane fuel cell (PEMFC), are constructed out of alloys of Ti, Pt, Cr, or graphitic materials that have limitations. Electrical conductivity, cost, and corrosion resistance are among the critical considerations for bi-polar plate material. Graphene, which possesses impressive conductivity and toughness, is an attractive option as coating on metallic substrates of PEMFC bipolar plates. This study investigates corrosion resistance and its durability due to graphene developed by chemical vapor deposition on a pure Ni-Cu alloy and a commercial Ni-Cu alloy in 0.5 m H2 SO4 environment, with a view to exploring use of graphene coated Ni-Cu alloys for the construction of PEMFC bipolar plates. The graphene coating on the pure alloy shows remarkably superior corrosion resistance than the commercial alloy that is attributed to the former's ability to develop considerably defect-free graphene.
RESUMEN
The goal of present study is to explore how the size and functionalization of graphene quantum dots (GQDs) affect their sensing capabilities. Specifically, we investigated the adsorption of SO2, SOF2, SO2F2, and SF6 on GQDs that were functionalized with -CH3, -COCH3, and -NH2. We used density functional theory to analyse the electronic properties of these functionalized GQDs and found that the functionalization significantly altered their electronic properties. For example, the B3LYP H-L gap of pristine triangulene was 3.9eV, while the H-L gap of functionalized triangulene ranged from 2.8 eV to 3.6 eV (using the B3LYP functional). Our results indicate that -NH2 functionalized phenalenyl and triangulene provide strong interaction with SO2, with adsorption energies of -0.429 eV and -0.427 eV, respectively. These adsorption properties exhibit physisorption, leading to high gas sensitivity and superior recovery time. The findings of this study provide new insights into the potential use of GQDs for detecting the decomposed constituents of sulfur hexafluoride, which can be beneficial for assessing the operation status of SF6 insulated devices. Overall, our calculations suggest that functionalized GQDs can be employed in gas insulated systems for partial discharge detection.
RESUMEN
Two-photon lithography (TPL) is a versatile technology for additive manufacturing of 2D and 3D micro/nanostructures with sub-wavelength resolved features. Recent advancement in laser technology has enabled the application of TPL fabricated structures in several fields such as microelectronics, photonics, optoelectronics, microfluidics, and plasmonic devices. However, the lack of two-photon polymerizable resins (TPPRs) induces bottleneck to the growth of TPL to its true potential, and hence continuous research efforts are focused on developing efficient TPPRs. In this article, we review the recent advancements in PI and TPPR formulation and the impact of process parameters on fabrication of 2D and 3D structures for specific applications. The fundamentals of TPL are described, followed by techniques used for achieving improved resolution and functional micro/nanostructures. Finally, a critical outlook and future prospects of TPPR formulation for specific applications are presented.
RESUMEN
Macroalgae are a diverse group of primary producers that offer indispensable ecosystem services towards bacterial colonization and proliferation in aquatic biomes. Macroalgae/bacteria interactions are complex in natural biomes and contribute mutually to their growth and biotechnological outcomes. Most findings on macroalgae-associated bacteria and their secreted enzymes have largely been limited to nutraceutical applications. Here, in this study, we demonstrate and investigate the growth of Bacillus sp. (macroalgae-associated bacteria) with the substitution of its associated macroalgae (Gracilaria corticata) on graphene oxide (GO). The findings indicated that the presence of wrinkles of GO nanosheets resulted in cell proliferation and adherence without causing mechanical damage to the cell membrane. Furthermore, the assembly of GO-marine bacteria was explored for organic pollutant treatment using methylene blue (MB) as a model dye. The degradation results suggest the breakdown of MB into non-toxic byproducts as suggested by the phytotoxicity assay.
Asunto(s)
Algas Marinas , Agua , Ecosistema , Azul de Metileno/toxicidad , BacteriasRESUMEN
Currently, several biosimilars of low-molecular-weight heparins (LMWHs) with differing potencies are being developed and marketed globally. Thus, it is important that the potency of each biosimilar LMWH be compared with its innovator's molecule. The present study aimed to determine the bioequivalence of biosimilar (Cloti-Xa™) and innovator (Clexane® ) formulations of enoxaparin sodium (40 mg/0.4 ml) in healthy human volunteers. It was conducted as a single-dose, randomized, double-blind, two-period, two-treatment, two-sequence, crossover, balanced, pharmacodynamic study (NCT05265676). The participants were sequentially and randomly administered subcutaneous injections of Cloti-Xa™ (test) and Clexane® (reference), separated by a one-week washout period. To assess the Anti-Xa & Anti-IIa activities, tissue factor pathway inhibitor (TFPI) release and activated partial thromboplastin time (aPTT), blood samples were obtained at various timepoints upto 24 h after the drug administration. Bioequivalence was concluded if the two-sided 90% CI for the test to reference ratio of the population is within 80%-125% for each of the Ln-transformed values of Amax and AUECt for Anti-Xa and Anti-IIa. TFPI and aPTT data were submitted as supportive evidence. The study sample consisted of twenty-four male participants. The 90% CIs of Amax and AUECt for Anti-Xa activity were 105.50%-113.90% and 103.97%-112.08%, and for Anti-IIa activity were 106.56%-117.90% and 107.35%-124.86%, respectively. In addition, the 90% CI of the ratio of Anti-Xa/Anti-IIa activity falls within the acceptance criteria. TFPI and aPTT profiles were similar for both products. No serious adverse events were observed during the study. Conclusively, the results showed that Cloti-Xa™ and Clexane® are bioequivalent and well-tolerated.
Asunto(s)
Biosimilares Farmacéuticos , Enoxaparina , Biosimilares Farmacéuticos/efectos adversos , Enoxaparina/efectos adversos , Enoxaparina/análogos & derivados , Voluntarios Sanos , Heparina de Bajo-Peso-Molecular , Humanos , Masculino , Ensayos Clínicos Controlados Aleatorios como Asunto , Equivalencia TerapéuticaRESUMEN
BACKGROUND: The provision of health care services including maternal and newborn care is a dynamic system of entitlement and obligations among the community, the service providers, and the government. Thermal control remains poor in newborns owing to immaturity of the thermoregulatory center and newborn become vulnerable to hypothermia especially premature babies, intrauterine growth retardation and LBW babies, and even normal babies.This study aimed to assess the knowledge & practices regarding thermal protection their determinants. METHODS: Cross-sectional study was conducted in the Amroha district. The study population comprised women of reproductive age (15 to 49 years) who have delivered a live baby within the past 12 weeks before the conduct of the study. Out of 6 blocks, 2 most populous villages were selected. Total 61 villages from 6 blocks were covered under the study. Knowledge and practices regarding newborn thermal care were expressed in percentages and compared. RESULTS: The knowledge domain on thermal protection of baby, 60.9% of the respondents were well aware of how to keep baby warm after delivery, 71.4% of respondents knew that baby should be dried soon after birth, 64.9% of the respondents had an idea of time to dry the baby, 69.6% of the respondents knew that baby should be wrapped soon after birth. CONCLUSION: The findings of the study provides an insight into the existing knowledge and necessitate a need for quantitative studies in the study area to access knowledge & practices related to thermal protection of newborns. The authors emphasize a need for improving community awareness for the promotion of newborn care and improve the health system to meet the demands of birthing mothers and the needs of newborns.
RESUMEN
Release of liquefied hydrocarbons in domestic and industrial effluents, along with oil spills cause significant adverse effects on the soil, water, aquatic ecosystem, and humans. Thus, selective and cost-effective technology to address this challenge is highly desirable. Here, we report the fabrication of electrospun polyvinyl alcohol (PVA) membrane, modified with glutaraldehyde (GA) and a device thereof, for treatment of oil emulsions and recovery of precious fossil fuel. The modified PVA membranes are super-oleophobic with a high static underwater oil contact angle of 163 ± 3° for motor oil. Investigation of wetting properties suggests that the membrane can efficiently separate different oils such as sesame oil, motor oil, mustard oil, and sunflower oil from their emulsions. The motor oil emulsion with separation efficiency of >99% at an excellent permeate flux of 5128 L/m2·h·bar has been achieved. Thus, the prepared modified PVA membrane construes an easy solution for not only effective treatment of oily wastewater but also for oil recovery with high flux.
Asunto(s)
Alcohol Polivinílico , Purificación del Agua , Ecosistema , Emulsiones , Humanos , Membranas ArtificialesRESUMEN
The major bottleneck in fabrication of engineered 3D nanostructures is the choice of materials. Adding functionality to these nanostructures is a daunting task. In order to mitigate these issues, we report a two-photon patternable all carbon material system which can be used to fabricate fluorescent 3D micro/nanostructures using two-photon lithography, with subwavelength resolution. The synthesized material system eliminates the need to use conventional two-photon absorbing materials such as two-photon dyes or two-photon initiators. We have used two different trifunctional acrylate monomers and carbon dots, synthesized hydrothermally from a polyphenolic precursor, to formulate a two-photon processable resin. Upon two-photon excitation, photogenerated electrons in the excited states of the carbon dots facilitate the free radical formation at the surface of the carbon dots. These radicals, upon interaction with vinyl moieties, enable cross-linking of acrylate monomers. Free-radical induced two-photon polymerization of acrylate monomers without any conventional proprietary two-photon absorbing materials was accomplished at an ultrafine subwavelength resolution of 250 nm using 800 nm laser excitation. The effect of critical parameters such as average laser power, carbon dot concentration, and radiation exposure were determined for the fabrication of one-, two-, and three-dimensional functional nanostructures, applicable in a range of domains where fluorescence and toxicity are of the utmost importance. A fabrication speed as high as 100 mm/s was achieved. The ability to fabricate functional 3D micro-/nanostructures is anticipated to instigate a paradigm shift in various areas such as metamaterials, energy storage, drug delivery, and optoelectronics to name a few.
RESUMEN
The discovery of graphene oxide (GO) has made a profound impact on varied areas of research due to its excellent physicochemical properties. However, surface engineering of these nanostructures holds the key to enhanced surface properties. Here, we introduce surface engineering of reduced GO (rGO) shells by radially grafting Ni-Co layered double hydroxide (LDH) lamella on rGO shells to form Ni-Co LDH@rGO. The morphology of synthesized Ni-Co LDH@rGO mimics dendritic cell-like three-dimensional (3D) hierarchical morphologies. Silica nanospheres form self-sacrificial templates during the reduction of GO shells to form rGO shells during the template-assisted synthesis. The radial growth of LDH lamellae during hydrothermal process on GO shells provides access to a significantly larger number of additional active redox sites and overcompensates the loss of pseudocapacitive charge storage centers during the reduction of GO to form rGO shells. This enables in the synthesis of novel surface-engineered rGO nanoshells, which provide large surface area, enhanced redox sites, high porosity, and easy transport of ions. These synthesized 3D dendritic cell-like morphologies of Ni-Co LDH@rGO show a high capacitance of â¼2640 F g-1. A flexible hybrid device fabricated using this nanomaterial shows a high energy density of â¼35 Wh kg-1 and a power density of 750 W kg-1 at 1 A g-1. No appreciable compromise in device performance is observed under bending conditions. This synthesis strategy may be used in the development of functional materials useful for potential applications, including sensors, catalysts, and energy storage.
RESUMEN
Functionalization of graphene-based materials using chemical moieties not only modify the electronic structure of the underlying graphene but also enable in limited enhancement of targeted properties. Surface modification of graphene-based materials using other nanostructures enhances the effective properties by minimally modifying the properties of pristine graphene backbone. In this pursuit, we have synthesized bio-inspired hierarchical nanostructures based on Ni-Co layered double hydroxide on reduced graphene oxide core-shells using template based wet chemical approach. The material synthesized have been characterized structurally and electrochemically. The fabricated dendritic morphology of the composite delivers a high specific capacity of 1056 Cg-1. A cost effective solid state hybrid supercapacitor device was also fabricated using the synthesized electrode material which shows excellent performance with high energy density and fast charging capability.
RESUMEN
Metamaterials are engineered materials that offer the flexibility to manipulate the incident waves leading to exotic applications such as cloaking, extraordinary transmission, sub-wavelength imaging and negative refraction. These concepts have largely been explored in the context of electromagnetic waves. Acoustic metamaterials, similar to their optical counterparts, demonstrate anomalous effective elastic properties. Recent developments have shown that coiling up the propagation path of acoustic wave results in effective elastic response of the metamaterial beyond the natural response of its constituent materials. The effective response of metamaterials is generally evaluated using the 'S' parameter retrieval method based on amplitude of the waves. The phase of acoustic waves contains information of wave pressure and particle velocity. Here, we show using finite-element methods that phase reversal of transmitted waves may be used to predict extreme acoustic properties in space coiling metamaterials. This change is the difference in the phase of the transmitted wave with respect to the incident wave. This method is simpler when compared with the more rigorous 'S' parameter retrieval method. The inferences drawn using this method have been verified experimentally for labyrinthine metamaterials by showing negative refraction for the predicted band of frequencies.
RESUMEN
Successful synthesis of graphene has created a runaway effect in the exploration of other similar two-dimensional materials. These materials are important as they provide large surface areas and have led to the exploration of new physical phenomena. Even though graphene has exotic electronic properties, its spin-orbit coupling is very weak. Tin, being one of the heaviest elements in this group, is expected to have enhanced spin-orbit coupling in addition to other exotic properties of graphene. Here we report optical signatures of free standing stanene obtained using UV-vis absorption spectroscopy. Raman measurements were performed on a transmission electron microscope (TEM) grid. Interlayer spacing, phonon frequencies and the imaginary part of the complex dielectric function obtained using first principles methods are in good agreement with the experimental data. Occurrence of parallel bands suggests the possibility of the presence of excitonic effects in stanene.
RESUMEN
Metamaterials displaying negative refractive index has remarkable potential to facilitate the manipulation of incident waves for wide variety of applications such as cloaking, superlensing and the like. Space-coiling approach is a recently explored technique to achieve extreme properties. The space coiling phenomena cause less energy absorption as compared to local resonating phenomena for obtaining extreme parameters. Here we show extreme properties in doubly negative 3D space coiling acoustic metamaterials. Frequency dispersive spectrum of extreme constitutive parameters has been calculated for 2D maze and 3D space coiling labyrinthine structure. This is in good agreement to the calculated acoustic band dispersion.
RESUMEN
Stanene is one of most important of 2D materials due to its potential to demonstrate room temperature topological effects due to opening of spin-orbit gap. In this pursuit we report synthesis and investigation of optical properties of stanene up to few layers, a two-dimensional hexagonal structural analogue of graphene. Atomic scale morphological and elemental characterization using HRTEM equipped with SAED and EDAX detectors confirm the presence of hexagonal lattice of Sn atoms. The position of Raman peak along with the inter-planar 'd' spacing obtained from SAED for prepared samples are in good agreement with that obtained from first principles calculations and confirm that the sheets are not (111) α-Sn sheets. Further, the optical signature calculated using density functional theory at ~191 nm and ~233 nm for low buckled stanene are in qualitative agreement with the measured UV-Vis absorption spectrum. AFM measurements suggest interlayer spacing of ~0.33 nm in good agreement with that reported for epitaxial stanene sheets. No traces of oxygen were observed in the EDAX spectrum suggesting the absence of any oxidized phases. This is also confirmed by Raman measurements by comparing with oxidized stanene sheets.
RESUMEN
The small size of Na(+) and Cl(-) ions provides a bottleneck in desalination and is a challenge in providing alternatives for continuously depleting fresh water resources. Graphene by virtue of its structural properties has the potential to address this issue. Studies have indicated that use of monolayer graphene can be used to filter micro volumes of saline solution. Unfortunately it is extremely difficult, resource intensive and almost impractical with current technology to fabricate operational devices using mono-layered graphene. Nevertheless, graphene based devices still hold the key to solve this problem due to its nano-sieving ability. Here we report synthesis of oxidized graphene frameworks and demonstrate a functional device to desalinate and purify seawater from contaminants including Na(+) and Cl(-) ions, dyes and other microbial pollutants. Micro-channels in these frameworks help in immobilizing larger suspended solids including bacteria, while nano-sieving through graphene enables the removal of dissolved ions (e.g. Cl(-)). Nano-sieving incorporated with larger frameworks has been used in filtering Na(+) and Cl(-) ions in functional devices.
Asunto(s)
Grafito/química , Óxidos/química , Purificación del Agua , Conductividad Eléctrica , Nanoestructuras/química , Nanoestructuras/ultraestructura , Oxidación-Reducción , Agua de Mar/químicaRESUMEN
Extraordinary transmittance and focusing of light in quasi far field region using miniaturized optical devices is a daunting task. A polarization independent, broadband, planar metallic transmissive micro aperture capable of achromatically focusing visible light in quasi far field region is proposed. The calculated enhancement factor of transmission efficiency was about ~2.2. The total transmission after the aperture is about 60%. This high throughput focusing device will open new avenues for focusing electromagnetic energy in the wide area of sensors and energy concentration.
RESUMEN
A study of the structural stability of boron nanoribbons is presented. Antiaromatic instabilities are found to destabilize boron nanoribbons. Our studies suggest that nanoribbons obtained from "α sheets" are more stable than those from reconstructed {1221} sheets and traditional triangular boron sheets. The stability of the nanoribbons increases with an increasing ribbon width resulting in an increased hole density (η) and, hence, an increased number of hexagonal motifs in the nanoribbon. The boron nanoribbons formed are mostly metallic; however, semiconducting structures have also been observed.
RESUMEN
A novel quasi-two-dimensional phase of carbon and the formation of a metastable hexagonal phase of single-walled carbon nanotubes (SWCNTs) have been investigated using density functional theory (DFT) by subjecting the SWCNT bundles to hydrostatic pressure. The chirality of the nanotubes determines the breaking of symmetry of the nanotubes under compression. Interestingly SWCNTs are found to undergo a mixture of sp(2) and sp(3) hybridization and are found to form novel interacting quasi-two-dimensional sheets of interlinked SWCNTs under hydrostatic pressure. Symmetry breaking, leading to the formation of highly directional bonds at stressed edges, is found to play an important role in the interlinking of the nanotubes. (3n + 3, 3n + 3) SWCNTs are found to acquire a hexagonal cross-section when subjected to hydrostatic pressures. The opening of a pseudogap is observed for small as well as large diameter armchair SWCNTs in nanotube bundles. Equilibrium separations calculated using the Leonard-Jones potentials indicate excellent agreement with the predictions of density functional calculations and experimental observations.