RESUMEN
When a suspension of charged nanoparticles is in contact with a like-charged water-solid interface, next to this interface a particle-free layer is formed. The present study provides reliable measurements of the thickness of this particle-free layer with three different techniques, namely optical reflectivity, quartz crystal microbalance (QCM), and direct force measurements with atomic force microscopy (AFM). Suspensions of negatively charged nanoparticles of different size and type are investigated. When the measured layer thickness is normalized to the particle size, one finds that this normalized thickness shows universal inverse square root dependence on the particle volume fraction. This universal dependence can be also derived from Poisson-Boltzmann theory for highly asymmetric electrolytes, whereby one has to assume that the nanoparticles represent the multivalent coions.
RESUMEN
Direct force measurements between negatively charged silica microparticles are carried out in suspensions of like-charged nanoparticles with atomic force microscopy (AFM). In agreement with previous studies, oscillatory force profiles are observed at larger separation distances. At smaller distances, however, soft and strongly repulsive forces are present. These forces are caused by double layer repulsion between the like-charged surfaces and can be quantitatively interpreted with the Poisson-Boltzmann (PB) model. However, the PB model must be adapted to a strongly asymmetric electrolyte to capture the nonexponential nature of these forces. Thereby, the nanoparticles are modeled as highly charged co-ions, while the counter ions are monovalent. This model permits extraction of the effective charge of the nanoparticles, which is well comparable to the one obtained from electrophoresis. The PB model also explains the presence of a particle-free layer close to the interface.
RESUMEN
In this work, we study the interfacial boundary conditions at the interface between two immiscible liquids under a laminar flow. We measure the hydrodynamic drainage forces acting on a colloid probe as it approaches a flat and smooth Teflon film coated with silicone oil films, submerged in a sucrose solution using atomic force microscopy. On Teflon substrates, silicone oil films of thickness several hundred nanometers could be stabilized, and we found the effective slip length over these to be of the order of several hundred nanometers which increases with increasing silicone oil film thickness, as expected. The fitted slip length values weakly increased with increasing shear rates. The high values of effective slip length indicate that lubricant-infused surfaces are likely to reduce drag on length scales that approach the macroscopic scales.
RESUMEN
Lubricant-infused surfaces have attracted great attention recently and are described as slippery liquid-infused porous surfaces (SLIPS). Here, we measured the hydrodynamic drainage forces on SLIPS by colloid probe atomic force microscopy (AFM) and quantified the effective slip length over a nanothin silicone oil layer on hydrophobized [octadecyltrichlorosilane (OTS)-coated] silicon wafers. The thickness of a stable silicone oil film on OTS-Si under sucrose solution was determined to be 1.8 ± 1.3 nm and was found to induce an average effective slip length of 29 ± 3 nm, very close to that of an uninfused OTS substrate. These relatively low values of effective slip are confirmed by the relatively large macroscopic roll-off angle values of water droplets on the same substrates. Both nano- and macroscale results reflect the immobilized nature of a silicone oil layer of thickness around 2 nm within an underlying monolayer. These results have important implications in the design of drag-reducing coatings using lubricant infusion.
RESUMEN
A new family of polymeric, lubricant-infused, nanostructured wrinkled surfaces was designed that effectively retains inert nontoxic silicone oil, after draining by spin-coating and vigorous shear for 2 weeks. The wrinkled surfaces were fabricated using three different polymers (Teflon AF, polystyrene, and poly(4-vinylpyridine)) and two shrinkable substrates (Polyshrink and shrinkwrap), and Teflon on Polyshrink was found to be the most effective system. The volume of trapped lubricant was quantified by adding Nile red to the silicone oil before infusion and then extracting the oil and Nile red from the surfaces in heptane and measuring by fluorimetry. Higher volumes of lubricant induced lower roll-off angles for water droplets, and in turn induced better antifouling performance. The infused surfaces displayed stability in seawater and inhibited growth of Pseudoalteromonas spp. bacteria up to 99%, with as little as 0.9 µL cm-2 of the silicone oil infused. Field tests in the waters of Sydney Harbor over 7 weeks showed that silicone oil infusion inhibited the attachment of algae, but the algal attachment increased as the silicone oil was slowly depleted over time. The infused wrinkled surfaces have high transparency and are moldable, making them suited to protect the windows of underwater sensors and cameras.
RESUMEN
Advancements in the fabrication and study of superhydrophobic surfaces have been significant over the past 10years, and some 20years after the discovery of the lotus effect, the study of special wettability surfaces can be considered mainstream. While the fabrication of superhydrophobic surfaces is well advanced and the physical properties of superhydrophobic surfaces well-understood, the robustness of these surfaces, both in terms of mechanical and thermodynamic properties, are only recently getting attention in the literature. In this review we cover publications that appeared over the past ten years on the thermodynamic and mechanical robustness of superhydrophobic surfaces, by which we mean the long term stability under conditions of wear, shear and pressure. The review is divided into two parts, the first dedicated to thermodynamic robustness and the second dedicated to mechanical robustness of these complex surfaces. Our work is intended as an introductory review for researchers interested in addressing longevity and stability of superhydrophobic surfaces, and provides an outlook on outstanding aspects of investigation.
RESUMEN
We report the fabrication of both single-scale and hierarchical superhydrophobic surfaces, created by exploiting the spontaneous wrinkling of a rigid Teflon AF film on two types of shrinkable plastic substrates. Sub-100 nm to micrometric wrinkles were reproducibly generated by this simple process, with remarkable control over the size and hierarchy. Hierarchical Teflon AF wrinkled surfaces showed extremely high water repellence (contact angle 172°) and very low contact angle hysteresis (2°), resulting in droplets rolling off the surface at tilt angles lower than 5°. The wrinkling process intimately binds the Teflon AF layer with its substrate, making these surfaces mechanically robust, as revealed by macroscale and nanoscale wear tests: hardness values were close to that of commercial optical lenses and aluminum films, resistance to scratch was comparable to commercial hydrophobic coatings, and damage by extensive sonication did not significantly affect water repellence. By this fabrication method the size of the wrinkles can be reproducibly tuned from the nanoscale to the microscale, across the whole surface in one step; the fabrication procedure is extremely rapid, requiring only 2 min of thermal annealing to produce the desired topography, and uses inexpensive materials. The very low roll-off angles achieved in the hierarchical surfaces offer a potentially up-scalable alternative as self-cleaning and drag-reducing coatings.
