Fibre optic ratiometric fluorescence pH sensor for monitoring corrosion in concrete.

In this communication a novel concept for pH sensing is introduced which is specifically adapted to monitor carbonation induced corrosion in concrete structures. The method is based on a ratiometric measurement principle, exploiting the pH sensitive colour switching of thymol blue in the basic pH regime and the emissive properties of two different (Zn)CdSe/ZnS core shell quantum dots. The transition point of thymol blue in a Hydrogel D4 matrix was determined to be at around pH 11.6, which fits ideally to the intended application. Next to the fundamental spectroscopic characterization of the ratiometric response, a new design for a sensor head, suitable for the incorporation into concrete matrices is presented. Toward this, a manufacturing process was developed which includes the preparation of a double layer of polymers containing either thymol blue or a quantum dot mixture inside a porous ceramic tube. Results of a proof-of-priciple performance test of the sensor head in solutions of different pH and in cement specimens are presented, with encouraging results paving the way for future field tests in concrete.

Surface Modifications for Photon-Upconversion-Based Energy-Transfer Nanoprobes.

An emerging class of inorganic optical reporters are near-infrared (NIR) excitable lanthanide-based upconversion nanoparticles (UCNPs) with multicolor emission and long luminescence lifetimes in the range of several hundred microseconds. For the design of chemical sensors and optical probes that reveal analyte-specific changes in their spectroscopic properties, these nanomaterials must be combined with sensitive indicator dyes that change their absorption and/or fluorescence properties selectively upon interaction with their target analyte, utilizing either resonance energy transfer (RET) processes or reabsorption-related inner filter effects. The rational development of UCNP-based nanoprobes for chemical sensing and imaging in a biological environment requires reliable methods for the surface functionalization of UCNPs, the analysis and quantification of surface groups, a high colloidal stability of UCNPs in aqueous media as well as the chemically stable attachment of the indicator molecules, and suitable instrumentation for the spectroscopic characterization of the energy-transfer systems and the derived nanosensors. These topics are highlighted in the following feature article, and examples of functionalized core-shell nanoprobes for the sensing of different biologically relevant analytes in aqueous environments will be presented. Special emphasis is placed on the intracellular sensing of pH.

Environmental and Excitation Power Effects on the Ratiometric Upconversion Luminescence Based Temperature Sensing Using Nanocrystalline NaYF4 :Yb3+ ,Er3.

The luminescence intensity ratio (LIR) of the green emissions of the near-infrared excited NaYF4 :Yb3+ ,Er3+ nanocrystals is a promising method for temperature sensing. Here, the influence of excitation power density, excitation pulse length, excitation wavelength, silica shell, and solvent on the LIR and its temperature response is reported. The primary objective is to study the LIR mechanism and the impact of measurement and environmental parameters on the calibration and precision of the LIR. The LIR value is demonstrated to be unaffected by the excitation intensity in the studied range. This result is essential, considering the application feasibility of the LIR method as temperature sensor, where the effective excitation power density depends on the sample matrix and the distance excitation light travels in the sample. The pulsed excitation, however, results in an increase in the LIR value upon short pulse width. Silanization of bare nanocrystals has no effect on the LIR values, but the local warming of H2 O samples under laser exposure results in slightly increased LIR values compared to other solvents; D2 O, oleic acid, and dimethyl sulfoxide. The thermal quenching of luminescence lifetimes of Er3+ emission is proved to be too weak for sensing applications.

Ratiometric Sensing and Imaging of Intracellular pH Using Polyethylenimine-Coated Photon Upconversion Nanoprobes.

Measurement of changes of pH at various intracellular compartments has potential to solve questions concerning the processing of endocytosed material, regulation of the acidification process, and also acidification of vesicles destined for exocytosis. To monitor these events, the nanosized optical pH probes need to provide ratiometric signals in the optically transparent biological window, target to all relevant intracellular compartments, and to facilitate imaging at subcellular resolution without interference from the biological matrix. To meet these criteria we sensitize the surface conjugated pH sensitive indicator via an upconversion process utilizing an energy transfer from the nanoparticle to the indicator. Live cells were imaged with a scanning confocal microscope equipped with a low-energy 980 nm laser excitation, which facilitated high resolution and penetration depth into the specimen, and low phototoxicity needed for long-term imaging. Our upconversion nanoparticle resonance energy transfer based sensor with polyethylenimine-coating provides high colloidal stability, enhanced cellular uptake, and distribution across cellular compartments. This distribution was modulated with membrane integrity perturbing treatment that resulted into total loss of lysosomal compartments and a dramatic pH shift of endosomal compartments. These nanoprobes are well suited for detection of pH changes in in vitro models with high biological background fluorescence and in in vivo applications, e.g., for the bioimaging of small animal models.

Nanoparticle-based luminescent probes for intracellular sensing and imaging of pH.

Fluorescence imaging microscopy is an essential tool in biomedical research. Meanwhile, various fluorescent probes are available for the staining of cells, cell membranes, and organelles. Though, to monitor intracellular processes and dysfunctions, probes that respond to ubiquitous chemical parameters determining the cellular function such as pH, pO2 , and Ca(2+) are required. This review is focused on the progress in the design, fabrication, and application of photoluminescent nanoprobes for sensing and imaging of pH in living cells. The advantages of using nanoprobes carrying fluorescent pH indicators compared to single molecule probes are discussed as well as their limitations due to the mostly lysosomal uptake by cells. Particular attention is paid to ratiometric dual wavelength nanosensors that enable intrinsic referenced measurements. Referencing and proper calibration procedures are basic prerequisites to carry out reliable quantitative pH determinations in complex samples such as living cells. A variety of examples will be presented that highlight the diverseness of nanocarrier materials (polymers, micelles, silica, quantum dots, carbon dots, gold, photon upconversion nanocrystals, or bacteriophages), fluorescent pH indicators for the weak acidic range, and referenced sensing mechanisms, that have been applied intracellularly up to now. WIREs Nanomed Nanobiotechnol 2016, 8:378-413. doi: 10.1002/wnan.1366 For further resources related to this article, please visit the WIREs website.

Quenching of the upconversion luminescence of NaYF4:Yb³âº,Er³âº and NaYF4:Yb³âº,Tm³âº nanophosphors by water: the role of the sensitizer Yb³âº in non-radiative relaxation.

We have studied the mechanisms of water-based quenching of the upconversion photoluminescence of upconverting nanophosphors (UCNPs) via luminescence decay measurements for a better understanding of the non-radiative deactivation pathways responsible for the relatively low upconversion luminescence efficiency in aqueous solutions. This included both upconversion luminescence measurements and the direct excitation of emissive energy states of Er(3+) and Yb(3+) dopants in NaYF4:Yb(3+),Er(3+) UCNPs by measuring the decays at 550 and 655 nm upon 380 nm excitation and at 980 nm upon 930 nm excitation, respectively. The luminescence intensities and decays were measured from both bare and silanized NaYF4:Yb(3+),Er(3+) and NaYF4:Yb(3+),Tm(3+) UCNPs in H2O and D2O. The measurements revealed up to 99.9% quenching of the upconversion photoluminescence intensity of both Er(3+) and Tm(3+) doped bare nanophosphors by water. Instead of the multiphonon relaxation of excited energy levels of the activators, the main mechanism of quenching was found to be the multiphonon deactivation of the Yb(3+) sensitizer ion caused by OH-vibrations on the surface of the nanophosphor. Due to the nonlinear nature of upconversion, the quenching of Yb(3+) has a higher order effect on the upconversion emission intensity with the efficient Yb-Yb energy migration in the ∼35 nm nanocrystals making the whole nanophosphor volume susceptible to surface quenching effects. The study underlines the need of efficient surface passivation for the use of UCNPs as labels in bioanalytical applications performed in aqueous solutions.

A FRET based pH probe with a broad working range applicable to referenced ratiometric dual wavelength and luminescence lifetime read out.

A luminescent probe for determination of pH was designed based on a Förster resonance energy transfer (FRET) system, combining a europium chelate as the donor and carboxynaphtho-fluorescein as a pH sensitive acceptor. The FRET system enables referenced pH detection in an exceptional broad dynamic range from pH 3 to 9.

Chemical sensing and imaging based on photon upconverting nano- and microcrystals: a review.

The demand for photostable luminescent reporters that absorb and emit light in the red to near-infrared (NIR) spectral region continues in biomedical research and bioanalysis. In recent years, classical organic fluorophores have increasingly been displaced by luminescent nanoparticles. These consist of either polymer or silica based beads that are loaded with luminescent dyes, conjugated polymers, or inorganic nanomaterials such as semiconductor nanocrystals (quantum dots), colloidal clusters of silver and gold, or carbon dots. Among the inorganic materials, photon upconversion nanocrystals exhibit a high potential for application to bioimaging or biomolecular assays. They offer an exceptionally high photostability, can be excited in the NIR, and their anti-Stokes emission enables luminescence detection free of background and perturbing scatter effects even in complex biological samples. These lanthanide doped inorganic crystals have multiple emission lines that can be tuned by the selection of the dopants.This review article is focused on the applications of functionalized photon upconversion nanoparticles (UCNPs) to chemical sensing. This is a comparatively new field of research activity and mainly directed at the sensing and imaging of ubiquitous chemical analytes in biological samples, particularly in living cells. For this purpose, the particles have to be functionalized with suitable indicator dyes or recognition elements, as they do not show an intrinsic or specific luminescence response to most of these analytes (e.g. pH, oxygen, metal ions). We describe the strategies for the design of such responsive nanocomposites utilizing either luminescence resonance energy transfer or emission-reabsorption (inner filter effect) mechanisms and also highlight examples for their use either immobilized in sensor layers or directly as nanoprobes for intracellular sensing and imaging.

Background-free referenced luminescence sensing and imaging of pH using upconverting phosphors and color camera read-out.

Fluorescence background and problems with proper signal referencing severely disrupt the read-out of luminescence sensors and images. We present a pH sensor film in combination with a simple read-out technique that overcomes issues of background signals and autofluorescence. It consists of micrometer-sized upconversion phosphors (UCPs) and a pH indicator (Neutral Red) that absorbs their green emission. Both are embedded in a proton permeable hydrogel matrix. The UCPs generate green and red luminescence upon excitation with IR light of 980 nm wavelength. Solely the green light of the UCPs is affected by the pH indicator, while the red emission acts as inert reference signal for ratiometric measurements. The emission peaks of the UCPs match the red and green color channels of standard digital cameras. Thereby, the devised sensor film can be used for referenced ratiometric sensing and 2D imaging of pH using a color camera read-out. The sensor setup using common and hand-held devices is cheap and straightforward and allows for point-of-care measurements. Finally, pH measurements in human serum samples show the potential of this sensor for imaging free of interfering background signals.

Photon upconversion sensitized nanoprobes for sensing and imaging of pH.

Acidic pH inside cells indicates cellular dysfunctions such as cancer. Therefore, the development of optical pH sensors for measuring and imaging intracellular pH is a demanding challenge. The available pH-sensitive probes are vulnerable to e.g. photobleaching or autofluorescence background in biological materials. Our approach circumvents these problems due to near infrared excitation and upconversion photoluminescence. We introduce a nanosensor based on upconversion resonance energy transfer (UC-RET) between an upconverting nanoparticle (UCNP) and a fluorogenic pH-dependent dye pHrodo™ Red that was covalently bound to the aminosilane surface of the nanoparticles. The sensitized fluorescence of the pHrodo™ Red dye increases strongly with decreasing pH. By referencing the pH-dependent emission of pHrodo™ Red with the pH-insensitive upconversion photoluminescence of the UCNP, we developed a pH-sensor which exhibits a dynamic range from pH 7.2 to 2.5. The applicability of the introduced pH nanosensor for pH imaging was demonstrated by imaging the two emission wavelengths of the nanoprobe in living HeLa cells with a confocal fluorescence microscope upon 980 nm excitation. This demonstrates that the presented pH-nanoprobe can be used as an intracellular pH-sensor due to the unique features of UCNPs: excitation with deeply penetrating near-infrared light, high photostability, lack of autofluorescence and biocompatibility due to an aminosilane coating.

Multidentate europium chelates as luminoionophores for anion recognition: impact of ligand design on sensitivity and selectivity, and applicability to enzymatic assays.

The design of photoluminescent molecular probes for the selective recognition of anions is a major challenge for the development of optical chemical sensors. The reversible binding of anions to lanthanide centers is one promising option for the realization of anion sensors, because it leads in some cases to a strong luminescence increase by the replacement of quenching water molecules. Yet, it is an open problem to gain control of the sensitivity and selectivity of the luminescence response. Primarily, the selective detection of (poly)phosphate species such as nucleotides has emerged as a demanding task, because they are involved in many biological processes and enzymatic reactions. We designed a series of pyridyl-based multidentate europium complexes (seven-, six-, and five-dentate) including sensitizing chromophores and studied their luminescence intensity and lifetime responses to different (poly)phosphates (adenosine triphosphate (ATP), adenosine diphosphate (ADP), adenosine monophosphate (AMP), cyclic adenosine monophosphate (cAMP), pyrophosphate, and phosphate anions), and carboxyanions (citrate, malate, oxalacetate, succinate, α-ketoglutarate, pyruvate, oxalate, carbonate). The results reveal that the number of free coordination sites has a significant impact on the sensitivity and selectivity of the response. Because of its reversibility, the lanthanide probes can be applied to monitor the activity of ATP-consuming enzymes such ATPases and apyrases, which is demonstrated by means of the five-dentate complex.

A zinc-dipicolylethylenediamine modified near infrared fluorophore for sensing of ATP.

The development of fluorescent probes for sensing of anions in biological environments is still a demanding task. Due to the structural versatility of biological active anions there are many challenges to cope with compared to fluoroionophores for the determination of metal cations. This concerns particularly the design of the recognition element, which has to provide a selective response, preferably unaffected by alterations of pH and ionic strength. Polyphosphate anions such as ATP are interesting targets in bioanalysis because they are involved in many enzymatic reactions and bear versatile biological functions. Zinc dipicolylamine complexes attached to fluorophores have been turned out to be promising candidates for ATP sensing with sufficient sensitivity and selectivity. We now report the first NIR probe that responds to ATP based on a zinc dipicolylethylenediamine receptor. It shows a "turn-on" fluorescence behavior which is selective to other polyphosphate species even at high ionic strength of the sample solution.

Unveiling photodeactivation pathways for a new iridium(III) cyclometalated complex.

We report the synthesis and characterization of a neutral heteroleptic Ir(III) complex bearing 6-fluoro-2-phenylbenzo[d]thiazole as cyclometalating ligand and (Z)-6-(9H-carbazol-9-yl)-5-hydroxy-2,2-dimethylhex-4-en-3-one as ancillary ligand. The photodeactivation mechanisms have been elucidated through extensive density functional theory (DFT) calculations. The active role of metal-centered ((3) MC) triplet excited states in the nonradiative deactivation pathways is, for first time, confirmed in such complexes.

Referenced dual pressure- and temperature-sensitive paint for digital color camera read out.

The first fluorescent material for the referenced simultaneous RGB (red green blue) imaging of barometric pressure (oxygen partial pressure) and temperature is presented. This sensitive coating consists of two platinum(II) complexes as indicators and a reference dye, each of which is incorporated in appropriate polymer nanoparticles. These particles are dispersed in a polyurethane hydrogel and spread onto a solid support. The emission of the (oxygen) pressure indicator, PtTFPP, matches the red channel of a RGB color camera, whilst the emission of the temperature indicator [Pt(II) (Br-thq)(acac)] matches the green channel. The reference dye, 9,10-diphenylanthracene, emits in the blue channel. In contrast to other dual-sensitive materials, this new coating allows for the simultaneous imaging of both indicator signals, as well as the reference signal, in one RGB color picture without having to separate the signals with additional optical filters. All of these dyes are excitable with a 405 nm light-emitting diode (LED). With this new composite material, barometric pressure can be determined with a resolution of 22 mbar; the temperature can be determined with a resolution of 4.3 °C.

Oxygen and temperature sensitivity of blue to green to yellow light-emitting Pt(II) complexes.

The synthesis and photophysical properties of a series of yellow-green to blue-green emitting heteroleptic, cyclometalated Pt(II)(acac) complexes based on substituted phenylpyridine and tetrahydroquinoline ligands is reported. The luminescence intensities and lifetimes of these compounds were also studied in poly(styrene) films with respect to their responses to oxygen and temperature. Particularly, due to the insensitivity to oxygen quenching, these complexes are promising candidates as inert reference dyes in optical sensors. On the other hand, the Pt(II) complex with 2-(4-bromophenyl)-5,6,7,8-tetrahydroquinoline as C^N ligand, displays a strong temperature quenching effect. The distinct response to temperature was additionally calibrated after incorporation in poly(vinylidene chloride-co-acrylonitrile) serving as oxygen-blocking matrix copolymer. The resulting yellow-green-emitting temperature sensor signifies an interesting alternative to the available mostly red emitting temperature-sensitive probes.

The art of fluorescence imaging with chemical sensors.

Fluorescence imaging techniques involving chemical sensors are essential tools in many fields of science and technology because they enable the visualization of parameters which exhibit no intrinsic color or fluorescence, for example, oxygen, pH value, CO(2), H(2)O(2), Ca(2+), or temperature, to name just a few. This Review aims to highlight the state of the art of fluorescence sensing and imaging, starting from a comprehensive overview of the basic functional principles of fluorescent probes (or indicators) and the design of sensor materials. The focus is directed towards the progress made in the development of multiple sensors and methods for their signal read out. Imaging methods involving optical sensors are applied in quite diverse scientific areas, such as medical research, aerodynamics, and marine research.

Targeted luminescent near-infrared polymer-nanoprobes for in vivo imaging of tumor hypoxia.

Polystyrene nanoparticles (PS-NPs) were doped with an oxygen-sensitive near-infrared (NIR)-emissive palladium meso-tetraphenylporphyrin and an inert reference dye which are both excitable at 635 nm. The nanosensors were characterized with special emphasis on fundamental parameters such as absolute photoluminescence quantum yield and fluorescence lifetime. The PS-NPs were employed for ratiometric dual-wavelength and lifetime-based photoluminescent oxygen sensing. They were efficiently taken up by cultured murine alveolar macrophages, yielding a characteristic and reversible change in ratiometric response with decreasing oxygen concentration. This correlated with the cellular hypoxic status verified by analysis of hypoxia inducible factor-1α (HIF-1α) accumulation. In addition, the surface of PS-NPs was functionalized with polyethylene glycol (PEG) and the monoclonal antibody herceptin, and their binding to HER2/neu-overexpressing tumor cells was confirmed in vitro. First experiments with tumor-bearing mouse revealed a distinctive ratiometric response within the tumor upon hypoxic condition induced by animal sacrifice. These results demonstrate the potential of these referenced NIR nanosensors for in vitro and in vivo imaging that present a new generation of optical probes for oncology.

Förster resonance energy transfer methods for quantification of protein-protein interactions on microarrays.

Methods based on Förster (or fluorescence) resonance energy transfer (FRET) are widely used in various areas of bioanalysis and molecular biology, such as fluorescence microscopy, quantitative real-time polymerase chain reaction (PCR), immunoassays, or enzyme activity assays, just to name a few. In the last years, these techniques were successfully implemented to multiplex biomolecular screening on microarrays. In this review, some fundamental considerations and practical approaches are outlined and it is demonstrated how this very sensitive (and distance-dependent) method can be utilized for microarray-based high-throughput screening (HTS) with a focus on protein microarrays. The advantages and also the demands of this dual-label technique in miniaturized multiplexed formats are discussed with respect to its potential readout modes, such as intensity, dual wavelength, and time-resolved FRET detection.