A structural role for tryptophan in proteins, and the ubiquitous Trp Cδ1-H...O=C (backbone) hydrogen bond.

Tryptophan is the most prominent amino acid found in proteins, with multiple functional roles. Its side chain is made up of the hydrophobic indole moiety, with two groups that act as donors in hydrogen bonds: the Nϵ-H group, which is a potent donor in canonical hydrogen bonds, and a polarized Cδ1-H group, which is capable of forming weaker, noncanonical hydrogen bonds. Due to adjacent electron-withdrawing moieties, C-H...O hydrogen bonds are ubiquitous in macromolecules, albeit contingent on the polarization of the donor C-H group. Consequently, Cα-H groups (adjacent to the carbonyl and amino groups of flanking peptide bonds), as well as the Cϵ1-H and Cδ2-H groups of histidines (adjacent to imidazole N atoms), are known to serve as donors in hydrogen bonds, for example stabilizing parallel and antiparallel ß-sheets. However, the nature and the functional role of interactions involving the Cδ1-H group of the indole ring of tryptophan are not well characterized. Here, data mining of high-resolution (r ≤ 1.5 Å) crystal structures from the Protein Data Bank was performed and ubiquitous close contacts between the Cδ1-H groups of tryptophan and a range of electronegative acceptors were identified, specifically main-chain carbonyl O atoms immediately upstream and downstream in the polypeptide chain. The stereochemical analysis shows that most of the interactions bear all of the hallmarks of proper hydrogen bonds. At the same time, their cohesive nature is confirmed by quantum-chemical calculations, which reveal interaction energies of 1.5-3.0 kcal mol-1, depending on the specific stereochemistry.

Halogen Bonding to the π-Systems of Polycyclic Aromatics.

The propensity of the π-electron system lying above a polycyclic aromatic system to engage in a halogen bond is examined by DFT calculations. Prototype Lewis acid CF3I is placed above the planes of benzene, naphthalene, anthracene, phenanthrene, naphthacene, chrysene, triphenyl, pyrene, and coronene. The I atom positions itself some 3.3-3.4 Å above the polycyclic plane, and the associated interaction energy is about 4 kcal/mol. This quantity is a little smaller for benzene, but is roughly equal for the larger polycyclics. The energy only oscillates a little as the Lewis acid slides across the face of the polycyclic, preferring regions of higher π-electron density over minima of the electrostatic potential. The binding is dominated by dispersion which contributes half of the total interaction energy.

Transition from covalent to noncovalent bonding between tetrel atoms.

The strength and nature of the bonding between tetrel (T) atoms in R2T⋯TR2 is examined by quantum calculations. T atoms cover the range of Group 14 atoms from C to Pb, and substituents R include Cl, F, and NH2. Systems vary from electrically neutral to both positive and negative overall charged radicals. There is a steady weakening progression in T-T bond strength as the tetrel atom grows larger, transitioning smoothly from a strong covalent to a much weaker noncovalent bond for the larger T atoms. The latter have some of the characteristics of a ditetrel bond, but there are also significant deviations from a classic bond of this type. The T2Cl4- anions are more strongly bonded than the corresponding cations, which are in turn stronger than the neutrals.

Comparison of Various Theoretical Measures of Aromaticity within Monosubstituted Benzene.

The effects of monosubstitution on the aromaticity of benzene are assessed using a number of different quantitative schemes. The ability of the mobile π-electrons to respond to an external magnetic field is evaluated using several variants of the NICS scheme which calculate the shielding of points along the axis perpendicular to the molecule. Another class of measures is related to the drive toward the uniformity of C-C bond lengths and strengths. Several energetic quantities are devised to approximate an aromatic stabilization energy and the tendency of the molecule to maintain planarity. There is a lack of consistency in that the various measures of aromaticity lead to differing conclusions as to the effects of substituents on the aromaticity of the ring.

Tetrel Bonding of the Carbenium Ion Forms a Pentacoordinate Carbon Atom.

As a flat trigonal species, the CR3 + carbenium ion contains a pair of deep π-holes above and below its molecular plane. In the case of CH3 + a first base will form a covalent bond with the central C, making the combined species tetrahedral. Approach of a second base to the opposite side results in a longer but rather strong noncovalent tetrel bond (TB). While CMe3 + can also form a similar asymmetric complex with a pair of bases, it also has the capacity to form a pair of nearly equivalent TBs, such that the resulting symmetric trigonal bipyramid configuration is only slightly higher in energy. When the three substituents on the central C are phenyl rings, the symmetric configuration with two TBs predominates. These tetrel bonds are quite strong, reaching up to 20 kcal/mol. Adding OPH2 or OCH substituents to the phenyl rings permits the formation of intramolecular C⋅⋅O TBs to the central C, very similar in many respects to the case where these TBs are intermolecular.

Strengthening of Noncovalent Bonds Caused by Internal Deformations.

It is usually assumed that the maximal noncovalent bond strength is achieved by full geometry optimization of the geometry of the dyad. Density functional theory calculations show this not to be the case. A number of systems are considered that include osme, tetrel, pnictogen, and chalcogen bonds, involving both σ- and π-holes, as well as hypervalency. By suitable adjustment of the bond angles within the Lewis acid, the base can be drawn closer than in the optimized structure, with an accompanying substantial strengthening of the noncovalent bond, by more than 10 kcal/mol in some cases. The energetic cost of this deformation from the optimized geometry can be surprisingly small in comparison to the gain in the interaction energy. Taking the opposite approach of first pushing the two subunits closer to one another and then permitting internal geometries to adjust to the shortened distance produces only minimal bond strengthening.

Wolfium bonds in homodimers of MX4Y (M = Mo, W; X = F, Cl, Br; Y = O, S, Se).

The term "wolfium bond" has been recently introduced to describe the noncovalent attraction between an atom of group 6 and a nucleophile via a σ-hole binding site. Crystal structures commonly contain a motif wherein two MX4Y units are arranged in close proximity, where M represents either Mo or W, and X and Y refer to halogen and chalcogen atoms respectively. DFT calculations were thus applied to a wide range of homodimers of these molecules so as to assess their preferred arrangements, and to characterize the types of bonding that are present in each in a systematic manner. The most stable Dual-X configuration is symmetric and contains a pair of equivalent M⋯X bonds. The interaction energies range from -8 to -29 kcal mol-1, and are largest for X = F, Y = O, and M = W. The X electron donor is replaced by Y, and the two wolfium bonds are reduced to one, in the less stable Mono-Y structure, with interaction energies between -2 and -10 kcal mol-1. There is some question as to whether the weaker bonds of this type constitute true wolfium bonds.

Types of noncovalent bonds within complexes of thiazole with CF4 and SiF4.

The five-membered heteroaromatic thiazole molecule contains a number of electron-rich regions that could attract an electrophile, namely the N and S lone pairs that lie in the molecular plane, and π-system areas above the plane. The possibility of each of these sites engaging in a tetrel bond (TB) with CF4 and SiF4, as well as geometries that encompass a CH⋯F H-bond, was explored via DFT calculations. There are a number of minima that occur in the pairing of thiazole with CF4 that are very close in energy, but these complexes are weakly bound by less than 2 kcal mol-1 and the presence of a true TB is questionable. The inclusion of zero-point vibrational energies alters the energetic ordering, which is further modified when entropic effects are added. The preferred geometry would thus be sensitive to the temperature of an experiment. Replacement of CF4 by SiF4 leaves intact most of the configurations, and their tight energetic clustering, the ordering of which is again altered as the temperature rises. But there is one exception in that by far the most tightly bound complex involves a strong Si⋯N TB between SiF4 and the lone pair of the thiazole N, with an interaction energy of 30 kcal mol-1. Even accounting for its high deformation energy and entropic considerations, this structure remains as clearly the most stable at any temperature.

Osme Bond: Geometric and Energetic Features in the Adducts between OsO4 and Lewis Bases.

Adducts between OsO4 and Lewis bases exert a role in important oxidation processes such as epoxidation and dihydroxylation. It has been shown that the attractive interaction driving the formation of these adducts is a σ-hole bond involving the metal as the electrophilic species; the term Osme Bond (OmB) was proposed for designating it. Here some new adducts between OsO4 and various bases have been characterized through single crystal x-ray diffraction (XRD) and computational studies (density functional theory, DFT), confirming the existence of a robust correlation between σ-hole interaction energy and deformation of the tetrahedral geometry of OsO4. Also, some adducts formed by RuO4 with nucleophiles were investigated computationally.

Transition between the Noncovalency and Covalency of σ-Hole Bonds.

The properties of the bond between a N-ligand and a Lewis acid containing a σ-hole are studied by quantum chemical methods. Interactions considered include pnicogen bonds involving SbX5, PX5, and PX3, where X represents any of the halogen atoms F, Cl, Br, or I. Also studied are the tetrel bonds of PbX4 and SiX4, as well as the chalcogen bond involving TeOX4. Both NH3 and NCH are applied as two possible bases of differing potency. Some of the bonds are very strong with interaction energies easily exceeding 25 kcal/mol and with AIM bond critical point densities much higher than 0.04 au, suggesting their classification as coordinate covalent bonds. The pentavalent SbX5 and PX5 fall into this category when combined with NH3, as does TeOX4. Although the tetrel bonds involving PbX4 are only slightly weaker, they are probably better viewed as a strong noncovalent bond on the cusp of covalency. Changing the internal bonding of hypervalent SbX5 to the more conventional SbX3 weakens the interaction to a classical noncovalent pnicogen bond. Reducing the base nucleophilicity from NH3 to NCH weakens the bonds so that they are clearly noncovalent.

Relation between Halogen Bond Strength and IR and NMR Spectroscopic Markers.

The relationship between the strength of a halogen bond (XB) and various IR and NMR spectroscopic quantities is assessed through DFT calculations. Three different Lewis acids place a Br or I atom on a phenyl ring; each is paired with a collection of N and O bases of varying electron donor power. The weakest of the XBs display a C-X bond contraction coupled with a blue shift in the associated frequency, whereas the reverse trends occur for the stronger bonds. The best correlations with the XB interaction energy are observed with the NMR shielding of the C atom directly bonded to X and the coupling constants involving the C-X bond and the C-H/F bond that lies ortho to the X substituent, but these correlations are not accurate enough for the quantitative assessment of energy. These correlations tend to improve as the Lewis acid becomes more potent, which makes for a wider range of XB strengths.

Influence of Internal Angular Arrangement on Pnicogen Bond Strength.

The three Z-X covalent bonds of a ZX3 unit (Z = P, As, Sb, Bi) are normally arranged in a pyramidal structure. Quantum chemical calculations show that pnicogen bonds (ZBs) to the central Z are weakened if ZX3 is flattened, as in the opening of an umbrella. The partial closing of the umbrella has the opposite effect of substantially strengthening these ZBs, even amounting to a 2- or 3-fold magnification in certain cases. The strongest such bonds, wherein Sb and Bi are in a strained configuration within a ZO3CH model system, have interaction energies of 20 kcal/mol with an NH3 base. Most of these systems, whether flattened or more pyramidal, are capable of engaging in three ZBs simultaneously, despite a certain amount of negative cooperativity.

Cooperativity between H-bonds and tetrel bonds. Transformation of a noncovalent C⋯N tetrel bond to a covalent bond.

The dimers and trimers formed by imidazole (IM) and F2TO (T = C, Si, Ge) are studied by ab initio calculations. IM can engage in either a NH⋯O H-bond with F2TO or a T⋯N tetrel bond (TB) with the π-hole above the T atom. The latter is a true noncovalent TB for T = C but is a much shorter and stronger covalent bond with F2SiO or F2GeO. When a second IM is added, the cooperativity emerging from its H-bond with the first IM makes it a stronger nucleophile, leading to two minima with F2CO. The first structure contains a long noncovalent C⋯O TB and there is a much shorter covalent bond in the other, with a small energy barrier separating them. The same sort of double minimum occurs when the two IM units are situated parallel to one another in a stacked geometry.

Pd and Pt metal atoms as electron donors in σ-hole bonded complexes.

Quantum calculations provide a systematic assessment of the ability of Group 10 transition metals M = Pd and Pt to act as an electron donor within the context of pnicogen, chalcogen, and halogen bonds. These M atoms are coordinated in a square planar geometry, attached to two N atoms of a modified phenanthrene unit, as well as two ligand atoms Cl, Br, or I. As the Lewis acid, a series of AFn molecules were chosen, which could form a pnicogen bond (A = P, As, Sb), chalcogen bond (A = S, Se, Te) or halogen bond (A = Cl, Br, I) with M. These noncovalent bonds are fairly strong, varying between 6 and 20 kcal mol-1, with the occupied dz2 orbital of M acting as the origin of charge transferred to the acid. Pt forms somewhat stronger bonds than Pd, and the bond strength rises with the size of the A atom of the acid. Within the context of smaller A atoms, the bond strength rises in the order pnicogen < chalcogen < halogen, but this distinction vanishes for the fifth-row A atoms. The nature of the ligand atoms on M has little bearing on the bond strength. Based on the Harmonic Oscillator Model of Aromaticity (HOMA) index, the ZB, YB and XB bonds were shown to have only a subtle effect on the ring electronic structures.

Heavy pnicogen atoms as electron donors in sigma-hole bonds.

DFT calculations evaluate the strength of σ-hole bonds formed by ZH3 and ZMe3 (Z = N, P, As, Sb) acting as electron donor. Bond types considered include H-bond, halogen, chalcogen, pnicogen, and tetrel bond to perfluorinated Lewis acids FH, FBr, F2Se F3As, F4Ge, respectively, as well as their monofluorinated analogues. All of the Z atoms can engage in bonds of at least moderate strength, varying from 3 to more than 40 kcal mol-1. In most cases, N forms the strongest bonds, but the falloff from P to Sb is quite mild. However, this pattern is not characteristic of all cases, as for example in the halogen bonds, where the heavier Z atoms are comparable to, or even stronger than N. Most of the bonds are strengthened by replacing the three H atoms of ZH3 by methyl groups, better simulating the situation that would be generally encountered. Structural and NMR shielding data ought to facilitate the identification of these bonds within crystals or in solution.

Influence of Internal Noncovalent Bonds on Rotational Dynamics.

While a good deal of information has accumulated concerning the manner in which an intramolecular noncovalent bond can affect the relative energies of various conformers, less is known about how such bonds might affect the dynamics of interconversion between them. A series of molecules are constructed in which symmetrically equivalent conformers containing a noncovalent bond can be interconverted by a bond rotation, the energy barrier to which is computed by quantum chemical methods. The rotation of a CF3 group attached to a phenyl ring is speeded up if a Se··F chalcogen bond can be formed with a SeH or SeF group placed in an ortho position, a bond that is present in and stabilizes the rotational transition state. The analogous SnF3 group can, on the other hand, engage in a Sn··Se tetrel bond in its global minimum. The energetic cost of breakage of this bond is not fully compensated by the appearance of a Se··F chalcogen bond in the rotational transition state. Other systems were designed by placing two phenyl rings on opposite ends of an octahedrally disposed SeF4 group. A high barrier inhibits their rotation with bulky Br atoms in ortho positions, but this barrier is lowered if Br is replaced by groups that can engage in either chalcogen (SeH or SeF) or pnicogen (AsH2) bonds with the F atoms in the rotational transition state. The barrier reduction is closely related to the strength of these noncovalent bonds.

C∙∙∙O and Si∙∙∙O Tetrel Bonds: Substituent Effects and Transfer of the SiF3 Group.

The tetrel bond (TB) between 1,2-benzisothiazol-3-one-2-TF3-1,1-dioxide (T = C, Si) and the O atom of pyridine-1-oxide (PO) and its derivatives (PO-X, X = H, NO2, CN, F, CH3, OH, OCH3, NH2, and Li) is examined by quantum chemical means. The Si∙∙∙O TB is quite strong, with interaction energies approaching a maximum of nearly 70 kcal/mol, while the C∙∙∙O TB is an order of magnitude weaker, with interaction energies between 2.0 and 2.6 kcal/mol. An electron-withdrawing substituent on the Lewis base weakens this TB, while an electron-donating group has the opposite effect. The SiF3 group transfers roughly halfway between the N of the acid and the O of the base without the aid of cooperative effects from a third entity.

Tuneable tetrel bonds between tin and heavy pnictogens.

The first example of a binary cocrystal, comprised of SnPh3Cl and PPh3, whose components are organized via short and directional tetrel bonds (TtB) between tin and phosphorus, is described. DFT elucidates, for the first time, the factors influencing the strength of TtBs involving heavy pnictogens. A CSD survey reveals that such TtBs are also present and determinative in single component molecular systems, highlighting their significant potential as tuneable structure-directing elements.

Competition between Binding to Various Sites of Substituted Imidazoliums.

The imidazolium cation has a number of different sites that can interact with a nucleophile. Adding a halogen atom (X) or a chalcogen (YH) group introduces the possibility of an NX···nuc halogen or NY···nuc chalcogen bond, which competes against the various H-bonds (NH and CH donors) as well as the lone pair···π interaction wherein the nucleophile lies above the plane of the cation. Substituted imidazoliums are paired with the NH3 base, and the various different complexes are evaluated by density functional theory (DFT) calculations. The strength of XB and YB increases quickly along with the size and polarizability of the X/Y atom, and this sort of bond is the strongest for the heavier Br, I, Se, and Te atoms, followed by the NH···N H-bond, but this order reverses for Cl and S. The various CH···N H-bonds are comparable to one another and to the lone pair···π bond, all with interaction energies of 10-13 kcal/mol, values which show very little dependence upon the substituent placed on the imidazolium.