Biomechanical design of a new proximal humerus fracture plate using alternative materials.

Comminuted proximal humerus fractures are often repaired by metal plates, but potentially still experience bone refracture, bone "stress shielding," screw perforation, delayed healing, and so forth. This "proof of principle" investigation is the initial step towards the design of a new plate using alternative materials to address some of these problems. Finite element modeling was used to create design graphs for bone stress, plate stress, screw stress, and interfragmentary motion via three different fixations (no, 1, or 2 "kickstand" [KS] screws across the fracture) using a wide range of plate elastic moduli (EP = 5-200 GPa). Well-known design optimization criteria were used that could minimize bone, plate, and screw failure (i.e., peak stress < ultimate tensile strength), reduce bone "stress shielding" (i.e., bone stress under the new plate ≥ bone stress for an intact humerus, titanium plate, and/or steel plate "control"), and encourage callus growth leading to early healing (i.e., 0.2 mm ≤ axial interfragmentary motion ≤ 1 mm; shear/axial interfragmentary motion ratio <1.6). The findings suggest that a potentially optimal configuration involves the new plate being manufactured from a material with an EP of 5-41.5 GPa with 1 KS screw; but, using no KS screws would cause immediate bone fracture and 2 KS screws would almost certainly lead to delayed healing. A prototype plate might be fabricated using alternative materials suggested for orthopedics and other industries, like fiber-metal laminates, fiber-reinforced polymers, metal foams, pure polymers, shape memory alloys, or 3D-printed porous metals.

Rehabilitation after musculoskeletal injury: an overview of systems in the United States and Canada.

As North America is largely industrialized with a variety of available private transportation options, trauma is a common occurrence, resulting in significant burdens of disability and costs to the health care system. To meet increasing trauma care needs, there is a robust organization of trauma and rehabilitation systems, particularly within the United States and Canada. The American and Canadian health care systems share multiple similarities, including well-equipped Level I trauma centers, specialized inpatient rehabilitation units for polytrauma patients, and thorough evaluations for recovery and post-discharge placement. However, they also have several key differences. In Canada, the criteria for admission to inpatient rehabilitation vary by location, and inpatient rehabilitation is universally accessible, whereas outpatient rehabilitation services are generally not covered by insurance. In the United States, these admission criteria for post-acute inpatient rehabilitation are standardized, and both inpatient and outpatient services are covered by private and government-funded insurance with varying durations. Overall, both health care systems face challenges in post-acute rehabilitation, including benefit limitations and limited provider access in rural areas, and must continue to evolve to meet the rehabilitation needs of injured patients as they reintegrate into their communities.

Material Properties and Engineering Performance of Bone Fracture Plates Made from Plant Fiber Reinforced Composites: A Review.

Bone fracture plates are usually made from titanium alloy or stainless steel, which are much stiffer than bone. However, overly stiff plates can restrict axial interfragmentary motion at the fracture leading to delayed callus formation and healing, as well as causing bone "stress shielding" under the plate leading to bone atrophy, bone resorption, and plate loosening. Consequently, there have been many prior efforts to develop nonmetallic bone fracture plates with customized material properties using synthetic fibers (e.g., aramid, carbon, glass) in polymer resin. Even so, plant fibers (e.g., flax, roselle, sisal) offer additional advantages over synthetic fibers, such as availability, biodegradability, less toxicity during processing, lower financial cost, and recyclability. As such, there is an emerging interest in using plant fibers alone, or combined with synthetic fibers, to reinforce polymers for various applications. Thus, this is the first review article on the material properties and engineering performance of innovative bone fracture plates made from composite materials reinforced by plant fibers alone or supplemented using synthetic fibers. This article presents material-level fiber properties (e.g., elastic modulus, ultimate strength), material-level plate properties (e.g., fatigue strength, impact toughness), and bone-plate engineering performance (e.g., overall stiffness, plate stress), as well as discussing general findings, study quality, and future work. This article may help engineers and surgeons to design, fabricate, analyze, and utilize novel bone fracture plates.

Early major fracture care in polytrauma-priorities in the context of concomitant injuries: A Delphi consensus process and systematic review.

BACKGROUND: The timing of major fracture care in polytrauma patients has a relevant impact on outcomes. Yet, standardized treatment strategies with respect to concomitant injuries are rare. This study aims to provide expert recommendations regarding the timing of major fracture care in the presence of concomitant injuries to the brain, thorax, abdomen, spine/spinal cord, and vasculature, as well as multiple fractures. METHODS: This study used the Delphi method supported by a systematic review. The review was conducted in the Medline and EMBASE databases to identify relevant literature on the timing of fracture care for patients with the aforementioned injury patterns. Then, consensus statements were developed by 17 international multidisciplinary experts based on the available evidence. The statements underwent repeated adjustments in online- and in-person meetings and were finally voted on. An agreement of ≥75% was set as the threshold for consensus. The level of evidence of the identified publications was rated using the GRADE approach. RESULTS: A total of 12,476 publications were identified, and 73 were included. The majority of publications recommended early surgery (47/73). The threshold for early surgery was set within 24 hours in 45 publications. The expert panel developed 20 consensus statements and consensus >90% was achieved for all, with 15 reaching 100%. These statements define conditions and exceptions for early definitive fracture care in the presence of traumatic brain injury (n = 5), abdominal trauma (n = 4), thoracic trauma (n = 3), multiple extremity fractures (n = 3), spinal (cord) injuries (n = 3), and vascular injuries (n = 2). CONCLUSION: A total of 20 statements were developed on the timing of fracture fixation in patients with associated injuries. All statements agree that major fracture care should be initiated within 24 hours of admission and completed within that timeframe unless the clinical status or severe associated issues prevent the patient from going to the operating room. LEVEL OF EVIDENCE: Systematic Review/Meta-Analysis; Level IV.

Biomechanical Design Optimization of Distal Humerus Fracture Plates: A Review.

The goal of this article was to review studies on distal humerus fracture plates (DHFPs) to understand the biomechanical influence of systematically changing the plate or screw variables. The problem is that DHFPs are commonly used surgically, although complications can still occur, and it is unclear if implant configurations are always optimized using biomechanical criteria. A systematic search of the PubMed database was conducted to identify English-language biomechanical optimization studies of DHFPs that parametrically altered plate and/or screw variables to analyze their influence on engineering performance. Intraarticular and extraarticular fracture (EAF) data were separated and organized under commonly used biomechanical outcome metrics. The results identified 52 eligible DHFP studies, which evaluated various plate and screw variables. The most common plate variables evaluated were geometry, hole type, number, and position. Fewer studies assessed screw variables, with number and angle being the most common. However, no studies examined nonmetallic materials for plates or screws, which may be of interest in future research. Also, articles used various combinations of biomechanical outcome metrics, such as interfragmentary fracture motion, bone, plate, or screw stress, number of loading cycles to failure, and overall stiffness (Os) or failure strength (Fs). However, no study evaluated the bone stress under the plate to examine bone "stress shielding," which may impact bone health clinically. Surgeons treating intraarticular and extraarticular distal humerus fractures should seriously consider two precontoured, long, thick, locked, and parallel plates that are secured by long, thick, and plate-to-plate screws that are located at staggered levels along the proximal parts of the plates, as well as an extra transfracture plate screw. Also, research engineers could improve new studies by perusing recommendations in future work (e.g., studying alternative nonmetallic materials or "stress shielding"), clinical ramifications (e.g., benefits of locked plates), and study quality (e.g., experimental validation of computational studies).

An overview of the current diagnostic approach to Periprosthetic Joint Infections.

The diagnosis of periprosthetic joint infections (PJI) presents a formidable challenge to orthopaedic surgeons due to its complex and diverse manifestations. Accurate diagnosis is of utmost importance, as even mild pain following joint replacement surgery may indicate PJI in the absence of a definitive gold standard diagnostic test. Numerous diagnostic modalities have been suggested in the literature, and international societies have continually updated diagnostic criteria for this debilitating complication. This review article aims to comprehensively examine the latest evidence-based approaches for diagnosing PJI. Through a thorough analysis of current literature, we explore promising diagnostic strategies that have demonstrated effectiveness in identifying PJI. These strategies encompass the utilization of laboratory markers, such as erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP), alongside imaging techniques such as magnetic resonance imaging (MRI) and leukocyte scintigraphy. Additionally, we highlight the importance of synovial fluid analysis, including the potential role of alpha-defensin as a biomarker, and examine evolving international diagnostic criteria to standardize and improve diagnostic accuracy.

Biomechanical testing of a computationally optimized far cortical locking plate versus traditional implants for distal femur fracture repair.

BACKGROUND: This study experimentally validated a computationally optimized screw number and screw distribution far cortical locking distal femur fracture plate and compared the results to traditional implants. METHODS: 24 artificial femurs were osteotomized with a 10 mm fracture gap 60 mm proximal to the intercondylar notch. Three fixation constructs were used. (i) Standard locking plates secured with three far cortical locking screws inserted according to a previously optimized distribution in the femur shaft (n = 8). (ii) Standard locking plates secured with four standard locking screws inserted in alternating plate holes in the femur shaft (n = 8). (iii) Retrograde intramedullary nail secured proximally with one anterior-posterior screw and distally with two oblique screws (n = 8). Axial hip forces (700 and 2800 N) were applied while measuring axial interfragmentary motion, shear interfragmentary motion, and overall stiffness. FINDINGS: Experimental far cortical locking plate results compared well to published computational findings. Far cortical locking femurs contained the highest axial motion within the potential ideal range of 0.2-1 mm and a sheer-to-axial motion ratio < 1.6 at toe-touch weight-bearing (700 N). At full weight-bearing (2800 N), Standard locking-plated femurs had the only axial motion within 0.2-1 mm but had an excess shear-to-axial motion ratio. Nail-implanted femurs underperformed at both forces. INTERPRETATION: For toe-touch weight-bearing, the far cortical locking construct provided optimal biomechanics to allow moderate motion, which has been suggested to encourage early callus formation. Conversely, at full weight-bearing, the standard locking construct offered the biomechanical advantage on fracture motion.

Association Between Periprosthetic Joint Infection and Mortality Following Primary Total Hip Arthroplasty.

BACKGROUND: Periprosthetic joint infection (PJI) remains a dreaded and unpredictable complication after total hip arthroplasty (THA). In addition to causing substantial morbidity, PJI may contribute to long-term mortality risk. Our objective was to determine the long-term mortality risk associated with PJI following THA. METHODS: This population-based, retrospective cohort study included adult patients (≥18 years old) in Ontario, Canada, who underwent their first primary elective THA for arthritis between April 1, 2002, and March 31, 2021. The primary outcome was death within 10 years after the index THA. Mortality was compared between propensity-score-matched groups (PJI within 1 year after surgery versus no PJI within 1 year after surgery) with use of survival analyses. Patients who died within 1 year after surgery were excluded to avoid immortal time bias. RESULTS: A total of 175,432 patients (95,883 [54.7%] women) with a mean age (and standard deviation) of 67 ± 11.4 years underwent primary THA during the study period. Of these, 868 patients (0.49%) underwent surgery for a PJI of the replaced joint within 1 year after the index procedure. After matching, patients with a PJI within the first year had a significantly higher 10-year mortality rate than their counterparts (11.4% [94 of 827 patients] versus 2.2% [18 of 827 patients]; absolute risk difference, 9.19% [95% confidence interval (CI), 6.81% to 11.6%]; hazard ratio, 5.49 [95% CI, 3.32 to 9.09]). CONCLUSIONS: PJI within 1 year after surgery is associated with over a fivefold increased risk of mortality within 10 years. The findings of this study underscore the importance of prioritizing efforts related to the prevention, diagnosis, and treatment of PJIs. LEVEL OF EVIDENCE: Prognostic Level III . See Instructions for Authors for a complete description of levels of evidence.

Cytotoxicity of novel hybrid composite materials for making bone fracture plates.

Bone fracture plates are usually made from steel or titanium, which are much stiffer than cortical bone. This may cause bone 'stress shielding' (i.e. bone resorption leading to plate loosening) and delayed fracture healing (i.e. fracture motion is less than needed to stimulate callus formation at the fracture). Thus, the authors previously designed, fabricated, and mechanically tested novel 'hybrid' composites made from inorganic and organic materials as potential bone fracture plates that are more flexible to reduce these negative effects. This is the first study to measure the cytotoxicity of these composites via the survival of rat cells. Cubes of carbon fiber/flax fiber/epoxy and glass fiber/flax fiber/epoxy had better cell survival vs. Kevlar fiber/flax fiber/epoxy (57% and 58% vs. 50%). Layers and powders made of carbon fiber/epoxy and glass fiber/epoxy had higher cell survival than Kevlar fiber/epoxy (96%-100% and 100% vs. 39%-90%). The presence of flax fibers usually decreased cell survival. Thus, carbon and glass fiber composites (with or without flax fibers), but not Kevlar fiber composites (with or without flax fibers), may potentially be used for bone fracture plates.

Orthopedic surgeons' transition into full-time practice over the last 20 years: an analysis using Ministry of Health billing data.

BACKGROUND: Underemployment is a reality for many new graduates, who accept locum or part-time work as an alternative to unemployment because of lack of opportunities. We sought to analyze orthopedic surgeons' Ontario Health Insurance Program (OHIP) billing data over a 20-year period as a proxy of practice patterns and hypothesized that billing in the first 6 years of practice would be affected by underemployment and locum. METHODS: We analyzed the annual average billing totals of orthopedic surgeons, broken down by year of graduation, year of billings, and number of surgeons billing in that year. We analyzed public census data of the Ontario population size as a proxy of orthopedic demand. RESULTS: A 2019 cross-sectional analysis showed that around 15 surgeons per graduating year were billing in Ontario from the 1995 to 2016 cohorts, while 2017 and 2018 saw an increase to 30 and 36 actively billing surgeons, respectively. The number returned to more historical numbers in 2019, with 20 actively billing surgeons. For those surgeons billing in Ontario, billing trends have been roughly stable, with average billings increasing each year for the first 6 years in practice (p < 0.001). Year of graduation did not have an effect on the first 6 years of billings (p > 0.5). Billings were stable after 6 years in practice (p > 0.09). CONCLUSION: The Ontario health care system has not expanded to support more orthopedic surgeons despite the aging and growing population; despite our growing population, the number of surgeons being trained and retained has not matched this growth. Further research needs to be done to guide optimal health human resource decision-making.

Postfracture survival in a population-based study of adults aged ≥66 yr: a call to action at hospital discharge.

Postfracture survival rates provide prognostic information but are rarely reported along with other mortality outcomes in adults aged ≥50 yr. The timing of survival change following a fracture also needs to be further elucidated. This population-based, matched-cohort, retrospective database study examined 98 474 patients (73% women) aged ≥66 yr with an index fracture occurring at an osteoporotic site (hip, clinical vertebral, proximal non-hip non-vertebral [pNHNV], and distal non-hip non-vertebral [dNHNV]) from 2011 to 2015, who were matched (1:1) to nonfracture individuals based on sex, age, and comorbidities. All-cause 1- and 5-yr overall survival and relative survival ratios (RSRs) were assessed, and time trends in survival changes were characterized starting immediately after a fracture. In both sexes, overall survival was markedly decreased over 6 yr of follow-up after hip, vertebral, and pNHNV fractures, and as expected, worse survival rates were observed in older patients and males. The lowest 5-yr RSRs were observed after hip fractures in males (66-85 yr, 51.9%-63.9%; ≥86 yr, 34.5%), followed by vertebral fractures in males (66-85 yr, 53.2%-69.4%; ≥86 yr, 35.5%), and hip fractures in females (66-85 yr, 69.8%-79.0%; ≥86 yr, 52.8%). Although RSRs did not decrease as markedly after dNHNV fractures in younger patients, relatively low 5-yr RSRs were observed in females (75.9%) and males (69.5%) aged ≥86 yr. The greatest reduction in survival occurred within the initial month after hip, vertebral, and pNHNV fractures, indicating a high relative impact of short-term factors, with survival-reduction effects persisting over time. Therefore, the most critical period for implementing interventions aimed at improving post-fracture prognosis appears to be immediately after a fracture; however, considering the immediate need for introducing such interventions, primary fracture prevention is also crucial to prevent the occurrence of the initial fracture in high-risk patients.

Fasciotomy and rate of amputation after tibial fracture in adults: a population-based cohort study.

Objectives: Limb amputation is a possible outcome of acute compartment syndrome. We undertook this study to investigate the occurrence of fasciotomy and amputation in patients with tibial fractures in the Ontario adult population, aiming to evaluate variables that may be associated with each of these outcomes. Design: Retrospective, population-based cohort study (April 1, 2003-March 31, 2016). Setting: Canadian province of Ontario. Participants: Patients with tibial fracture, aged 14 years and older. Interventions: Fasciotomy after tibial fracture. Main Outcomes and Measures: The primary outcomes were fasciotomy and amputation within 1 year of fasciotomy. Secondary outcomes included repeat surgery, new-onset renal failure, and mortality, all within 30 days of fasciotomy. Results: We identified 76,299 patients with tibial fracture; the mean (SD) age was 47 (21) years. Fasciotomy was performed in 1303 patients (1.7%); of these, 76% were male and 24% female. Patients who were younger, male, or experienced polytrauma were significantly more likely to undergo fasciotomy. Limb amputation occurred in 4.3% of patients undergoing fasciotomy, as compared with 0.5% in those without fasciotomy; older age, male sex, presence of polytrauma, and fasciotomy were associated with an increased risk of amputation (age odds ratio [OR] of 1.03 [95% CI, 1.02-1.03], P < 0.0001; sex OR of 2.04 [95% CI, 1.63-2.55], P < 0.0001; polytrauma OR of 9.37 [95% CI, 7.64-11.50], P < 0.0001; fasciotomy OR of 4.35 [95% CI, 3.21-5.90], P < 0.0001), as well as repeat surgery within 30 days (sex OR of 1.54 [95% CI, 1.14-2.07], P = 0.0053; polytrauma OR of 4.24 [95% CI, 3.33-5.38], P < 0.0001). Conclusions: Among tibial fracture patients, those who were male and who experienced polytrauma were at significantly higher risk of undergoing fasciotomy and subsequent amputation. Fasciotomy was also significantly associated with risk of amputation, a finding that is likely reflective of the severity of the initial injury.

Position statement: management of proximal humerus fractures.

We sought to compare outcomes and reoperation rates for the surgical treatment of proximal humerus fractures (excluding head-splitting fractures, fracture-dislocations, and isolated greater-tuberosity fractures) in men and women older than 60 years. We searched MEDLINE, Embase, and Cochrane through to Feb. 1, 2022, and included all English-language randomized trials comparing operative versus nonoperative treatment; open reduction and internal fixation (ORIF) with locking plate versus intramedullary nail; arthroplasty versus ORIF; and reverse shoulder arthroplasty versus hemiarthroplasty. Outcomes of interest were functional outcomes (e.g., Constant score), pain outcomes (visual analogue scale scores), and reoperation rates for the interventions of interest when available. We rated the quality of the evidence and strength of recommendations using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. This guideline will benefit patients considering surgical intervention for fractures of the proximal humerus by improving counselling on surgical treatment options and possible outcomes. It will also benefit surgical providers by improving their knowledge of various surgical approaches. Data presented could be used to develop frameworks and tools for shared decision-making.Nous avons cherché à comparer les résultats et les taux de réintervention à la suite d'un traitement chirurgical pour une fracture de l'humérus proximal (excluant les fractures de la tête humérale, les fractures-luxations et les fractures isolées de la grande tubérosité) chez les hommes et les femmes âgés de plus de 60 ans. Nous avons effectué des recherches dans les bases de données MEDLINE, Embase, et Cochrane jusqu'au 1er février 2022 et avons inclus tous les essais randomisés publiés en anglais comparant différents duos d'interventions : traitements chirurgicaux ou non chirurgicaux; réductions ouvertes avec fixation interne (ROFI) réalisées à l'aide d'une plaque verrouillée ou enclouages centromédullaires; arthroplasties ou ROFI; et arthroplasties inversées de l'épaule ou hémiarthroplasties. Les paramètres d'intérêt étaient la capacité fonctionnelle (p. ex., score de Constant), la douleur (p. ex., échelle analogique visuelle) et le taux de réintervention pour les interventions d'intérêt, selon les données disponibles. Nous avons évalué la qualité des données probantes et la solidité des recommandations à l'aide de l'approche GRADE (Grading of Recommendations, Assessment, Development and Evaluation). Cette ligne directrice profitera aux patients qui envisagent une intervention chirurgicale après une fracture de l'humérus proximal en améliorant les consultations sur les options de traitement chirurgical et les résultats escomptés. Elle aidera aussi les chirurgiens en améliorant leurs connaissances sur différentes approches chirurgicales. Les données présentées pourraient servir à mettre au point des cadres et des outils pour une prise de décision partagée.

Geriatric trauma: there is more to it than just the implant!

Geriatric trauma continues to rise, corresponding with the continuing growth of the older population. These fractures continue to expand, demonstrated by the incidence of hip fractures having grown to 1.5 million adults worldwide per year. This patient population and their associated fracture patterns present unique challenges to the surgeon, as well as having a profound economic impact on the health care system. Pharmacologic treatment has focused on prevention, with aging adults having impaired fracture healing in addition to diminished bone mineral density. Intraoperatively, novel ideas to assess fracture reduction to facilitate decreased fracture collapse have recently been explored. Postoperatively, pharmacologic avenues have focused on future fracture prevention, while shared care models between geriatrics and orthopaedics have shown promise regarding decreasing mortality and length of stay. As geriatric trauma continues to grow, it is imperative that we look to optimize all phases of care, from preoperative to postoperative.

Optimal delivery of endothelial progenitor cells in a rat model of critical-size bone defects.

Nonunion and segmental bone defects are complex issues in orthopedic trauma. The use of endothelial progenitor cells (EPCs), as part of a cell-based therapy for bone healing is a promising approach. In preclinical studies, culture medium (CM) is commonly used to deliver EPCs to the defect site, which has the potential for immunogenicity in humans. The goal of this study was to find an effective and clinically translatable delivery medium for EPCs. Accordingly, this study compared EPCs delivered in CM, phosphate-buffered saline (PBS), platelet-poor plasma (PPP), and platelet-rich plasma (PRP) in a rat model of femoral critical-size defects. Fischer 344 rats (n = 35) were divided into six groups: EPC+CM, EPC+PBS, EPC+PPP, EPC+PRP, PPP alone, and PRP alone. A 5 mm mid-diaphyseal defect was created in the right femur and stabilized with a miniplate. The defect was filled with a gelatin scaffold impregnated with the corresponding treatment. Radiographic, microcomputed tomography and biomechanical analyses were performed. Overall, regardless of the delivery medium, groups that received EPCs had higher radiographic scores and union rates, higher bone volume, and superior biomechanical properties compared to groups treated with PPP or PRP alone. There were no significant differences in any outcomes between EPC subgroups or between PPP and PRP alone. These results suggest that EPCs are effective in treating segmental defects in a rat model of critical-size defects regardless of the delivery medium used. Consequently, PBS could be the optimal medium for delivering EPCs, given its low cost, ease of preparation, accessibility, noninvasiveness, and nonimmunogenic properties.

Biomechanical design optimization of proximal humerus locked plates: A review.

BACKGROUND: Proximal humerus locked plates (PHLPs) are widely used for fracture surgery. Yet, non-union, malunion, infection, avascular necrosis, screw cut-out (i.e., perforation), fixation failure, and re-operation occur. Most biomechanical investigators compare a specific PHLP configuration to other implants like non-locked plates, nails, wires, and arthroplasties. However, it is unknown whether the PHLP configuration is biomechanically optimal according to some well-known biomechanical criteria. Therefore, this is the first review of the systematic optimization of plate and/or screw design variables for improved PHLP biomechanical performance. METHODS: The PubMed website was searched for papers using the terms "proximal humerus" or "shoulder" plus "biomechanics/biomechanical" plus "locked/locking plates". PHLP papers were included if they were (a) optimization studies that systematically varied plate and screw variables to determine their influence on PHLP's biomechanical performance; (b) focused on plate and screw variables rather than augmentation techniques (i.e., extra implants, bone struts, or cement); (c) published after the year 2000 signaling the commercial availability of locked plate technology; and (d) written in English. RESULTS: The 41 eligible papers involved experimental testing and/or finite element modeling. Plate variables investigated by these papers were geometry, material, and/or position, while screw variables studied were number, distribution, angle, size, and/or threads. Numerical outcomes given by these papers included stiffness, strength, fracture motion, bone and implant stress, and/or the number of loading cycles to failure. But, no paper fully optimized any plate or screw variable for a PHLP by simultaneously applying four well-established biomechanical criteria: (a) allow controlled fracture motion for early callus generation; (b) reduce bone and implant stress below the material's ultimate stress to prevent failure; (c) maintain sufficient bone-plate interface stress to reduce bone resorption (i.e., stress shielding); and (d) increase the number of loading cycles before failure for a clinically beneficial lifespan (i.e., fatigue life). Finally, this review made suggestions for future work, identified clinical implications, and assessed the quality of the papers reviewed. CONCLUSIONS: Applying biomechanical optimization criteria can assist biomedical engineers in designing or evaluating PHLPs, so orthopaedic surgeons can have superior PHLP constructs for clinical use.

The Role of Revision Total Joint Arthroplasty for Periprosthetic Fractures With Unstable Implants.

The management of periprosthetic fractures with unstable prosthetic implants is a challenging and commonly encountered problem. It is important to address the many current issues and controversies regarding the treatment of periprosthetic fractures with revision total joint arthroplasty. Key strategies to optimize surgical decision making around the use of arthroplasty and management of complications following these complex injuries will be addressed.

Reducing the Burden of Disease Associated With Periprosthetic Fractures: Prevention and the Need for Improved Perioperative Care.

The management of periprosthetic fractures remains challenging and controversial. There continues to be a significant burden of disease and substantial resource implications associated with fractures following total joint arthroplasty. Achieving consensus opinions regarding the prevention and treatment of this problem has important implications given the profound effect on patient outcomes. Multidisciplinary care in the preoperative and postoperative settings is critical, with a specific focus on bone health.

Fixation Strategies for Periprosthetic Fractures With Stable Implants.

The fixation of periprosthetic fractures remains challenging and controversial. It is important to achieve consensus opinions regarding the management of stable periprosthetic fractures with internal fixation. Key strategies to optimize surgical decision making and fixation and manage complications following these difficult injuries are addressed.

Biomechanical effects of different loads and constraints on finite element modeling of the humerus.

Currently, there is no established finite element (FE) method to apply physiologically realistic loads and constraints to the humerus. This FE study showed that 2 'simple' methods involving direct head loads, no head constraints, and rigid elbow or mid-length constraints created excessive stresses and bending. However, 2 'intermediate' methods involving direct head loads, but flexible head and elbow constraints, produced lower stresses and bending. Also, 2 'complex' methods involving muscles to generate head loads, plus flexible head and elbow constraints, generated the lowest stresses and moderate bending. This has implications for FE modeling research on intact and implanted humeri.