RESUMEN
Background: Single ventricle (SV) patients with interrupted inferior vena cava (iIVC) and azygos continuation are at high risk for unbalanced hepatic venous flow (HVF) distribution to the lungs after Fontan completion and subsequent pulmonary arteriovenous malformations (AVMs) formation. Objectives: The aim of the study was to utilize computational fluid dynamics (CFD) analysis to avoid maldistribution of HVF to the lungs after Fontan surgery. Methods: Four SV subjects with iIVC were prospectively studied with a 3-dimensional (3D) modeling workflow with digital 3D models created from segmented magnetic resonance images or computer tomography scans, virtual surgery, and CFD analysis over multiple physiologic states for the evaluation of operative plans to achieve balanced HVF to both lungs. Three of the patients were Fontan revision candidates with existing AVMs. All patients underwent Fontan completion or revision surgery. Results: CFD predicted that existing or proposed Fontan completion in all patients would result in 100% of HVF to one lung. Improved HVF balance was achieved with CFD analysis of alternative surgical approaches resulting in the average distribution of HVF to the right/left pulmonary arteries of 37%/63% ± 10.4%. A hepatoazygos shunt was required in all patients and additional creation of an innominate vein in one. CFD analysis was validated by the comparison of pre-operative predicted and postoperative MRI-measured total right/left pulmonary flow (51%/49% ± 5.4% vs 49%/51% ± 8.5%). Conclusions: A 3D modeling workflow with CFD simulation for SV patients with iIVC may avoid HVF maldistribution and development of AVMs after Fontan completion.
RESUMEN
BACKGROUND: The Fontan operation is a palliative technique for patients born with single ventricle heart disease. The superior vena cava (SVC), inferior vena cava (IVC), and hepatic veins are connected to the pulmonary arteries in a total cavopulmonary connection by an extracardiac conduit or a lateral tunnel connection. A balanced hepatic flow distribution (HFD) to both lungs is essential to prevent pulmonary arteriovenous malformations and cyanosis. HFD is highly dependent on the local hemodynamics. The effect of age-related changes in caval inflows on HFD was evaluated using cardiac magnetic resonance data and patient-specific computational fluid dynamics modeling. METHODS: SVC and IVC flow from 414 patients with Fontan were collected to establish a relationship between SVC:IVC flow ratio and age. Computational fluid dynamics modeling was performed in 60 (30 extracardiac and 30 lateral tunnel) patient models to quantify the HFD that corresponded to patient ages of 3, 8, and 15 years, respectively. RESULTS: SVC:IVC flow ratio inverted at ≈8 years of age, indicating a clear shift to lower body flow predominance. Our data showed that variation of HFD in response to age-related changes in caval inflows (SVC:IVC, 2, 1, and 0.5 corresponded to ages, 3, 8, and 15+, respectively) was not significant for extracardiac but statistically significant for lateral tunnel cohorts. For all 3 caval inflow ratios, a positive correlation existed between the IVC flow distribution to both the lungs and the HFD. However, as the SVC:IVC ratio changed from 2 to 0.5 (age, 3-15+) years, the correlation's strength decreased from 0.87 to 0.64, due to potential flow perturbation as IVC flow momentum increased. CONCLUSIONS: Our analysis provided quantitative insights into the impact of the changing caval inflows on Fontan's long-term HFD, highlighting the importance of SVC:IVC variations over time on Fontan's long-term hemodynamics. These findings broaden our understanding of Fontan hemodynamics and patient outcomes.
Asunto(s)
Procedimiento de Fontan , Cardiopatías Congénitas , Humanos , Preescolar , Niño , Adolescente , Vena Cava Superior/diagnóstico por imagen , Vena Cava Superior/cirugía , Vena Cava Superior/fisiología , Arteria Pulmonar/diagnóstico por imagen , Arteria Pulmonar/cirugía , Hígado/diagnóstico por imagen , Hemodinámica/fisiología , Vena Cava Inferior/diagnóstico por imagen , Vena Cava Inferior/cirugía , Cardiopatías Congénitas/diagnóstico por imagen , Cardiopatías Congénitas/cirugíaRESUMEN
The magnon propagation length, ⟨ξ⟩, of a ferro-/ferrimagnet (FM) is one of the key factors that controls the generation and propagation of thermally driven magnonic spin current in FM/heavy metal (HM) bilayer based spincaloritronic devices. For the development of a complete physical picture of thermally driven magnon transport in FM/HM bilayers over a wide temperature range, it is of utmost importance to understand the respective roles of temperature-dependent Gilbert damping (α) and effective magnetic anisotropy (Keff) in controlling the temperature evolution of ⟨ξ⟩. Here, we report a comprehensive investigation of the temperature-dependent longitudinal spin Seebeck effect (LSSE), radio frequency transverse susceptibility, and broad-band ferromagnetic resonance measurements on Tm3Fe5O12 (TmIG)/Pt bilayers grown on different substrates. We observe a significant drop in the LSSE voltage below 200 K independent of TmIG film thickness and substrate choice. This is attributed to the noticeable increases in effective magnetic anisotropy field, HKeff (âKeff) and α that occur within the same temperature range. From the TmIG thickness dependence of the LSSE voltage, we determined the temperature dependence of ⟨ξ⟩ and highlighted its correlation with the temperature-dependent HKeff and α in TmIG/Pt bilayers, which will be beneficial for the development of rare-earth iron garnet based efficient spincaloritronic nanodevices.
RESUMEN
PURPOSE: Pulmonary valve (PV) monocusp reconstruction in transannular patch (TAP) right ventricular outflow tract (RVOT) repair for Tetralogy of Fallot has variable clinical outcomes across different surgical approaches. The study purpose was to systematically evaluate how monocusp leaflet design parameters affect valve function in-vitro. METHODS: A 3D-printed, disease-specific RVOT model was tested under three infant physiological conditions. Monocusps were sewn into models with the native main pulmonary artery (MPA) forming backwalls that constituted 40% and 50% of the reconstructed circumference for z-score zero PV annulus and MPA diameters (native PV z-score - 3.52 and - 2.99 for BSA 0.32m2). Various leaflet free edge lengths (FEL) (relative to backwall), positions (relative to PV STJ), and scallop depths were investigated across both models. Pressure gradient, regurgitation, and coaptation were analyzed with descriptive statistics and regression models. RESULTS: Increasing FEL beyond 100% of the MPA backwall decreased gradient but mildly increased regurgitation to a peak of 25%. Positioning the free edge 2 mm past the STJ mildly increased gradient for each FEL without significantly changing regurgitation compared to STJ placement. Scalloping leaflets trivially affected performance. Pre-folding leaflets improved mobility and slightly reduced gradient. CONCLUSIONS: Balancing gradient, regurgitation, and oversizing for growth, a set of leaflet designs have been selected for pre-clinical evaluation. Designs with leaflet widths 140-160% in the 40% backwall model (110-120% in the 50% backwall), positioned at or 2 mm past the STJ, demonstrated the best results. The next stage of ex-vivo testing will additionally consider native RVOT distensibility, native leaflet interactions, and TAP characteristics.
Asunto(s)
Insuficiencia de la Válvula Pulmonar , Válvula Pulmonar , Tetralogía de Fallot , Lactante , Humanos , Tetralogía de Fallot/diagnóstico por imagen , Tetralogía de Fallot/cirugía , Ventrículos Cardíacos , Politetrafluoroetileno , Resultado del Tratamiento , Estudios RetrospectivosRESUMEN
OBJECTIVES: The study objectives were to report on a growing experience of conduction system mapping during complex congenital heart surgery and create a predictive model of conduction anatomy. METHODS: Patients undergoing complex cardiac repair with conduction mapping were studied. Intraoperative mapping used a multielectrode catheter to collect His bundle electrograms in the open, decompressed, beating heart. Patient anatomy, operative details, His bundle location, and postoperative conduction status were analyzed. By using classification and regression tree analysis, a predictive model of conduction location was created. RESULTS: A total of 109 patients underwent mapping. Median age and weight were 1.8 years (range, 0.2-14.9) and 10.8 kg (range, 3.5-50.4), respectively. Conduction was identified in 96% (105/109). Median mapping time was 6 minutes (range, 2-33). Anatomy included atrioventricular canal defect, double outlet right ventricle, complex transposition of the great arteries, and multiple ventricular septal defects. By classification and regression tree analysis, ventricular looping and visceroatrial situs were the greatest discriminators of conduction location. A total of 94 of 105 patients (89.5%) were free of complete heart block. Only 1 patient (2.9%) with heterotaxy syndrome developed complete heart block. CONCLUSIONS: The precise anatomic location of the conduction system in patients with complex congenital heart defects can be difficult for the surgeon to accurately predict. Intraoperative conduction mapping enables localization of the His bundle and adds to our understanding of the anatomic factors associated with conduction location. Predictive modeling of conduction anatomy may build on what is already known about the conduction system and help surgeons to better anticipate conduction location preoperatively and intraoperatively.
Asunto(s)
Ventrículo Derecho con Doble Salida , Cardiopatías Congénitas , Síndrome de Heterotaxia , Transposición de los Grandes Vasos , Humanos , Transposición de los Grandes Vasos/cirugía , Ventrículo Derecho con Doble Salida/cirugía , Corazón , Cardiopatías Congénitas/cirugía , Bloqueo CardíacoRESUMEN
PURPOSE: Tetralogy of Fallot and other conditions affecting the right ventricular outflow tract (RVOT) are common in pediatric patients, but there is a lack of quantitative comparison among techniques for repairing or replacing the pulmonary valve. The aim of this study was to develop a robust in vitro system for quantifying flow conditions after various RVOT interventions. METHODS: An infant-sized mock circulatory loop that includes a 3D-printed RVOT anatomical model was developed to evaluate flow conditions after different simulated surgical repairs. Physiologically correct flow and pressure were achieved with custom compliant tubing and a tunable flow restrictor. Pressure gradient, flow regurgitation, and coaptation height were measured for two monocusp leaflet designs after tuning the system with a 12 mm Hancock valved conduit. RESULTS: Measurements were repeatable across multiple samples of two different monocusp designs, with the wider leaflet in the 50% backwall model consistently exhibiting lower pressure gradient but higher regurgitation compared to the leaflet in the 40% backwall model. Coaptation height was measured via direct visualization with endoscopic cameras, revealing a shorter area of contact for the wider leaflet (3.3-4.0 mm) compared to the narrower one (4.3 mm). CONCLUSION: The 3D-printed RVOT anatomical model and in vitro pulmonary circulatory loop developed in this work provide a platform for planning and evaluating surgical interventions in the pediatric population. Measurements of regurgitation, pressure gradient, and coaptation provide a quantitative basis for comparison among different valve designs and positions.
Asunto(s)
Prótesis Valvulares Cardíacas , Válvula Pulmonar , Tetralogía de Fallot , Obstrucción del Flujo Ventricular Externo , Lactante , Niño , Humanos , Tetralogía de Fallot/diagnóstico por imagen , Tetralogía de Fallot/cirugía , Obstrucción del Flujo Ventricular Externo/cirugía , Válvula Pulmonar/diagnóstico por imagen , Válvula Pulmonar/cirugía , Ventrículos Cardíacos , Circulación Pulmonar , Resultado del TratamientoRESUMEN
Objective: Postoperative heart block is a significant problem in congenital heart surgery because of the unpredictability and variability of conduction tissue location in complex congenital heart defects. A novel technique for intraoperative conduction system mapping during complex congenital heart surgery is described. Methods: Intraoperative conduction system mapping was performed utilizing a high-density multielectrode grid catheter to collect intracardiac electrograms on open, beating hearts during repair of complex congenital heart defects. Electrograms were interpreted by electrophysiologists, and conduction tissue location was communicated in real time to the surgeon. After localizing conduction tissue, the heart was arrested and the repair was completed taking care to avoid injury to the mapped conduction system. Results: Two patients with complex heterotaxy syndrome underwent intraoperative conduction mapping during biventricular repair. Mapping accurately identified the location of conduction tissue thereby enabling avoidance of conduction system injury during surgery. Notably, conduction was unexpectedly found to be located inferiorly in a patient with L-looped ventricles. Successful biventricular repair was accomplished in both patients without injury to the conduction system. Conclusions: Intraoperative conduction mapping can effectively localize the conduction system during surgery and enable the surgeon to avoid its injury. This can lower the risk of heart block requiring pacemaker in children undergoing complex congenital heart surgery.
RESUMEN
B.Y. was born full term after a large vertex encephalocele was diagnosed prenatally. The unique challenge to repairing B.Y.'s encephalocele was a microcephalic skull and large proportion of likely functional extracranial brain tissue, which would need to be preserved. At Boston Children's Hospital, a simulation-based collaborative presurgical planning and rehearsal process, using both digital and 3D printed models, enabled successful technical completion and outcome of an otherwise inoperable case.
RESUMEN
RATIONALE AND OBJECTIVES: Historically, skills training in performing brain ultrasonography has been limited to hours of scanning infants for lack of adequate synthetic models or alternatives. The aim of this study was to create a simulator and determine its utility as an educational tool in teaching the skills that can be used in performing brain ultrasonography on infants. MATERIALS AND METHODS: A brain ultrasonography simulator was created using a combination of multi-modality imaging, three-dimensional printing, material and acoustic engineering, and sculpting and molding. Radiology residents participated prior to their pediatric rotation. The study included (1) an initial questionnaire and resident creation of three coronal images using the simulator; (2) brain ultrasonography lecture; (3) hands-on simulator practice; and (4) a follow-up questionnaire and re-creation of the same three coronal images on the simulator. A blinded radiologist scored the quality of the pre- and post-training images using metrics including symmetry of the images and inclusion of predetermined landmarks. Wilcoxon rank-sum test was used to compare pre- and post-training questionnaire rankings and image quality scores. RESULTS: Ten residents participated in the study. Analysis of pre- and post-training rankings showed improvements in technical knowledge and confidence, and reduction in anxiety in performing brain ultrasonography. Objective measures of image quality likewise improved. Mean reported value score for simulator training was high across participants who reported perceived improvements in scanning skills and enjoyment from simulator use, with interest in additional practice on the simulator and recommendations for its use. CONCLUSIONS: This pilot study supports the use of a simulator in teaching radiology residents the skills that can be used to perform brain ultrasonography.