RESUMEN
FK-506 is a potent immunosuppressive macrocyclic polyketide with growing pharmaceutical interest, produced by Streptomyces tsukubaensis. However, due to low levels synthesized by the wild-type strain, biotechnological production of FK-506 is rather limited. Optimization strategies to enhance the productivity of S. tsukubaensis by means of genetic engineering have been established. In this work primarily global regulatory aspects with respect to the FK-506 biosynthesis have been investigated with the focus on the global Crp (cAMP receptor protein) regulator. In expression analyses and protein-DNA interaction studies, the role of Crp during FK-506 biosynthesis was elucidated. Overexpression of Crp resulted in two-fold enhancement of FK-506 production in S. tsukubaensis under laboratory conditions. Further optimizations using fermentors proved that the strategy described in this study can be transferred to industrial scale, presenting a new approach for biotechnological FK-506 production. KEY POINTS: ⢠The role of the global Crp (cAMP receptor protein) regulator for FK-506 biosynthesis in S. tsukubaensis was demonstrated ⢠Crp overexpression in S. tsukubaensis was applied as an optimization strategy to enhance FK-506 and FK-520 production resulting in two-fold yield increase.
Asunto(s)
Streptomyces , Tacrolimus , Tacrolimus/metabolismo , Proteína Receptora de AMP Cíclico/genética , Proteína Receptora de AMP Cíclico/metabolismo , Inmunosupresores/metabolismo , Streptomyces/genética , Streptomyces/metabolismoRESUMEN
Tacrolimus (FK506) is a macrolide widely used as immunosuppressant to prevent transplant rejection. Synthetic production of FK506 is not efficient and costly, whereas the biosynthesis of FK506 is complex and the level produced by the wild type strain, Streptomyces tsukubaensis, is very low. We therefore engineered FK506 biosynthesis and the supply of the precursor L-lysine to generate strains with improved FK506 yield. To increase FK506 production, first the intracellular supply of the essential precursor lysine was improved in the native host S. tsukubaensis NRRL 18488 by engineering the lysine biosynthetic pathway. Therefore, a feedback deregulated aspartate kinase AskSt* of S. tsukubaensis was generated by site directed mutagenesis. Whereas overexpression of AskSt* resulted only in a 17% increase in FK506 yield, heterologous overexpression of a feedback deregulated AskCg* from Corynebacterium glutamicum was proven to be more efficient. Combined overexpression of AskCg* and DapASt, showed a strong enhancement of the intracellular lysine pool following increase in the yield by approximately 73% compared to the wild type. Lysine is coverted into the FK506 building block pipecolate by the lysine cyclodeaminase FkbL. Construction of a ∆fkbL mutant led to a complete abolishment of the FK506 production, confirming the indispensability of this enzyme for FK506 production. Chemical complementation of the ∆fkbL mutant by feeding pipecolic acid and genetic complementation with fkbL as well as with other lysine cyclodeaminase genes (pipAf, pipASt, originating from Actinoplanes friuliensis and Streptomyces pristinaespiralis, respectively) completely restored FK506 production. Subsequently, FK506 production was enchanced by heterologous overexpression of PipAf and PipASp in S. tsukubaensis. This resulted in a yield increase by 65% compared to the WT in the presence of PipAf from A. friuliensis. For further rational yield improvement, the crystal structure of PipAf from A. friuliensis was determined at 1.3 Å resolution with the cofactor NADH bound and at 1.4 Å with its substrate lysine. Based on the structure the Ile91 residue was replaced by Val91 in PipAf, which resulted in an overall increase of FK506 production by approx. 100% compared to the WT.
RESUMEN
(1) Background: Individual PEEP settings (PEEPIND) may improve intraoperative oxygenation and optimize lung mechanics. However, there is uncertainty concerning the optimal procedure to determine PEEPIND. In this secondary analysis of a randomized controlled clinical trial, we compared different methods for PEEPIND determination. (2) Methods: Offline analysis of decremental PEEP trials was performed and PEEPIND was retrospectively determined according to five different methods (EIT-based: RVDI method, Global Inhomogeneity Index [GI], distribution of tidal ventilation [EIT VT]; global dynamic and quasi-static compliance). (3) Results: In the 45 obese and non-obese patients included, PEEPIND using the RVDI method (PEEPRVD) was 16.3 ± 4.5 cm H2O. Determination of PEEPIND using the GI and EIT VT resulted in a mean difference of −2.4 cm H2O (95%CI: −1.2;−3.6 cm H2O, p = 0.01) and −2.3 cm H2O (95% CI: −0.9;3.7 cm H2O, p = 0.01) to PEEPRVD, respectively. PEEPIND selection according to quasi-static compliance showed the highest agreement with PEEPRVD (p = 0.67), with deviations > 4 cm H2O in 3/42 patients. PEEPRVD and PEEPIND according to dynamic compliance also showed a high level of agreement, with deviations > 4 cm H2O in 5/42 patients (p = 0.57). (4) Conclusions: High agreement of PEEPIND determined by the RVDI method and compliance-based methods suggests that, for routine clinical practice, PEEP selection based on best quasi-static or dynamic compliance is favorable.
RESUMEN
The chloropropanols, monochloropropane-1,2-diol (3-MCPD) and 1,3-dichloro-2-propanol (1,3-DCP) are potential contaminants that may be found in food contact materials (FCM) from paper and paperboard that have been treated with certain wet-strength resins. They can migrate from the paper matrix to aqueous food and beverages and, due to their potentially carcinogenic properties, are of increasing interest in quality assurance or official controls of paper-based FCM. We hereby describe an improved method for the analysis of 3-MCPD and 1,3-DCP in water extracts of FCM making use of 1-chloro-3-methoxy-2-propanol (CMP) as a novel internal standard. The LOD and LOQ were determined to be 0.4 µg/L and 1.2 µg/L for both analytes, making the method appropriate for the quantification of 3-MCPD and 1,3-DCP below the current legal limits. The method was applied to an extensive market survey of food contact articles made from paper and paperboard including 674 samples. The survey revealed that a high percentage of the products available on the market (e.g., up to 55% of the analysed drinking straws) exceed the BfR limits with values of up to 327 µg/L 3-MCPD and 20 µg/L 1,3-DCP detected in the cold water extract. Remarkable differences were observed concerning the release of 3-MCPD and 1,3-DCP from different kinds of paper-based FCM products, with drinking straws, cupcake cases, bagasse bowls and kitchen rolls showing particularly high rates (>10%) of non-conformity with the legal limits. A number of samples with especially high concentrations were additionally analysed by hot water extraction, which surprisingly yielded considerably lower results for the release of 3-MCPD and 1,3-DCP than cold water extraction. The results indicate that cold water extraction is the most sensitive method to detect the migration and control the risk of exposure to 3-MCPD and 1,3-DCP.
Asunto(s)
Contaminación de Alimentos/análisis , alfa-Clorhidrina/análogos & derivados , alfa-Clorhidrina/análisis , Cromatografía de Gases y Espectrometría de Masas , Calor , Humanos , Límite de Detección , Extracción Líquido-Líquido , Encuestas y Cuestionarios , AguaRESUMEN
BACKGROUND: Robot-assisted laparoscopic radical prostatectomy requires general anaesthesia, extreme Trendelenburg positioning and capnoperitoneum. Together these promote impaired pulmonary gas exchange caused by atelectasis and may contribute to postoperative pulmonary complications. In morbidly obese patients, a recruitment manoeuvre (RM) followed by individualised PEEP improves intraoperative oxygenation and end-expiratory lung volume (EELV). We hypothesised that individualised PEEP with initial RM similarly improves intraoperative oxygenation and EELV in non-obese individuals undergoing robot-assisted prostatectomy. METHODS: Forty males (age, 49-76 yr; BMI <30 kg m-2) undergoing prostatectomy received volume-controlled ventilation (tidal volume 8 ml kg-1 predicted body weight). Participants were randomised to either (1) RM followed by individualised PEEP (RM/PEEPIND) optimised using electrical impedance tomography or (2) no RM with 5 cm H2O PEEP. The primary outcome was the ratio of arterial oxygen partial pressure to fractional inspired oxygen (Pao2/Fio2) before the last RM before extubation. Secondary outcomes included regional ventilation distribution and EELV which were measured before, during, and after anaesthesia. The cardiovascular effects of RM/PEEPIND were also assessed. RESULTS: In 20 males randomised to RM/PEEPIND, the median PEEPIND was 14 cm H2O [inter-quartile range, 8-20]. The Pao2/Fio2 was 10.0 kPa higher with RM/PEEPIND before extubation (95% confidence interval [CI], 2.6-17.3 kPa; P=0.001). RM/PEEPIND increased end-expiratory lung volume by 1.49 L (95% CI, 1.09-1.89 L; P<0.001). RM/PEEPIND also improved the regional ventilation of dependent lung regions. Vasopressor and fluid therapy was similar between groups, although 13 patients randomised to RM/PEEPIND required pharmacological therapy for bradycardia. CONCLUSION: In non-obese males, an individualised ventilation strategy improved intraoperative oxygenation, which was associated with higher end-expiratory lung volumes during robot-assisted laparoscopic prostatectomy. CLINICAL TRIAL REGISTRATION: DRKS00004199 (German clinical trials registry).