RESUMEN
OBJECTIVES: Temporary anchorage devices (TADs) have become an integral part of comprehensive orthodontic treatments. This study evaluated the transfer accuracy of three-dimensional (3D) printed and computer-aided design/computer-aided manufacturing (CAD/CAM) milled surgical guides for orthodontic TADs using micro-computed tomography (CT) imaging in a preclinical trial. METHODS: Overall, 30 surgical guides were used to place TADs into typodonts; 3D printing and CAD/CAM milling were used to produce the guides. The virtual target positions of the TADs were compared to the real positions in terms of spatial and angular deviations using digital superimposition. Micro-CT imaging was used to detect the positions. To evaluate reliability, two investigators collected the measurements twice. Intra-rater and inter-rater correlations were tested. RESULTS: In total, 60 palatal TADs were evaluated. The mean coronal deviations in the print group ranged from 0.15 ± 0.20 mm to 0.71 ± 0.22 mm, whereas in the mill group, they ranged from 0.09 ± 0.15 mm to 0.83 ± 0.23 mm. At the apical tip, the overall deviations in the print group ranged from 0.14 ± 0.56 mm to 1.27 ± 0.66 mm, whereas in the mill group, they ranged from 0.15 ± 0.57 mm to 1.09 ± 0.44 mm. The mean intra-class and inter-class correlation coefficients ranged from 0.904 to 0.987. No statistically significant differences were found between the groups. CONCLUSIONS: CAD/CAM milled guides yielded spatial and angular accuracies comparable to those of 3D printed guides with notable deviations in the vertical positioning of TADs. CLINICAL SIGNIFICANCE: Digital planning of orthodontic temporary implants combines clinical predictability and the safety of surrounding tissue. Therefore, the transfer accuracy of the guides is crucial. This preclinical study was the first to evaluate CAD/CAM milling for orthodontic guides and found its accuracy comparable to that of the current "gold standard".
Asunto(s)
Diseño Asistido por Computadora , Impresión Tridimensional , Microtomografía por Rayos X , Microtomografía por Rayos X/métodos , Humanos , Métodos de Anclaje en Ortodoncia/instrumentación , Métodos de Anclaje en Ortodoncia/métodos , Reproducibilidad de los Resultados , Implantes Dentales , Cirugía Asistida por Computador/métodos , Imagenología Tridimensional/métodosRESUMEN
OBJECTIVES: This prospective clinical study aimed to compare transfer accuracy and immediate loss rate of hard versus soft transfer trays utilizing a CAD/CAM workflow. METHODS: We performed virtual bracket placement on intraoral scans of adolescent patients to create individual indirect bonding trays. Orthodontic software (Appliance Designer, 3Shape, Copenhagen, Denmark) was used to design the trays, which were then produced using 3D printing technology. Patients were randomly assigned to the hard or soft resin groups with a 1:1 allocation. Subgroups were determined based on the Little's Irregularity Index and distributed equally. RESULTS: 552 brackets were bonded onto adolescent patients using 46 CAD/CAM indirect bonding trays. The linear mean transfer errors ranged from -0.011 mm (soft) to -0.162 mm (hard) and angularly -0.255° (hard) and -0.243° (soft). No statistically significant differences were found between the subgroups or soft and hard resin groups. However, the transfer accuracy of molar brackets was significantly lower in the transversal and horizontal directions. All mean transfer errors were within the limits of clinical acceptability. The loss rate was 2.4 % in the hard resin group and 2.3 % in the soft resin group. The Intra Observer Correlation was excellent. SIGNIFICANCE: CAD/CAM technology for indirect bracket bonding has been proven reliable in a randomized clinical trial. Both hard and soft resin showed a low rate of immediate loss compared to the current literature. Soft resin was more favorable than hard resin in terms of accuracy and usability. However, the indirect bonding of molar brackets is significantly less accurate than incisor brackets.
Asunto(s)
Recubrimiento Dental Adhesivo , Soportes Ortodóncicos , Adolescente , Humanos , Estudios Prospectivos , Modelos Dentales , Impresión Tridimensional , IncisivoRESUMEN
OBJECTIVES: The present in vitro study aimed to evaluate the accuracy of three-dimensional (3D) printed indirect bonding trays consisting of hard or soft resin materials produced using computer-aided design and manufacturing (CAD/CAM). METHODS: Forty-eight dental casts were 3D printed. Four groups based on frontal crowding were defined and divided into hard- and soft-resin groups. After virtual bracket positioning on the digital models, the transfer trays were 3D printed. To evaluate the accuracy of the procedure, measurements were performed using a digital overlay of the virtual (target) bracket position and a post-bonding scan. The horizontal, transverse, and vertical deviations and angular discrepancies were analyzed. The loss rate was evaluated descriptively as a percentage. RESULTS: A total of 553 brackets were bonded using 24 soft and 24 resilient indirect bonding trays. The mean deviations were of 0.05 mm (transversal), 0.05 mm (horizontal), 0.09 mm (vertical), 0.13° (angulation) in the resilient resin group and of 0.01 mm (transversal), 0.08 mm (horizontal), 0.08 mm (vertical), 0.37° (angular) in the soft resin group. The loss rate was 6.9% and 0.7% in the hard and soft resin groups, respectively. Angular deviations were significantly higher in the soft resin group (P = 0.009), whereas the loss rate was considerably higher in the hard resin group (P < 0.001). SIGNIFICANCE: The findings indicate that indirect bonding using CAD/CAM is an accurate procedure in the laboratory setting. Soft resins are considered favorable for loss rate and useability.
Asunto(s)
Recubrimiento Dental Adhesivo , Soportes Ortodóncicos , Diseño Asistido por Computadora , Recubrimiento Dental Adhesivo/métodos , Modelos Dentales , Proyectos de Investigación , Método Simple CiegoRESUMEN
The synthesis and the solvatochromic properties of five dyes, obtained by condensation of guaiazulene with 4-hydroxybenzaldehydes, are described. Crystal structures of a quinoid dye and a phenolic dye precursor are presented. The dyes are sensitive to the dipolarity-polarizability of the medium and to the hydrogen-bond donor ability of protic solvents. Their solvatochromism is discussed in terms of Kamlet-Taft's pi* and alpha scales, and their difference in behaviour is interpreted. Alkali and alkaline earth metal salts effect halochromism, with one exception due to extreme steric hindrance. Thus, this dye is capable of measuring solvent polarities without sensing the presence of electrolytes. Preferential solvation of the dyes in a series of binary solvent mixtures is explained quantitatively by solvent-exchange models.