Resistance status of lepidopteran soybean pests following large-scale use of MON 87701 × MON 89788 soybean in Brazil.

Widespread adoption of MON 87701 × MON 89788 soybean, expressing Cry1Ac Bt protein and glyphosate tolerance, has been observed in Brazil. A proactive program was implemented to phenotypically and genotypically monitor Cry1Ac resistance in Chrysodeixis includens (Walker). Recent cases of unexpected injury in MON 87701 × MON 89788 soybean were investigated and a large-scale sampling of larvae on commercial soybean fields was performed to assess the efficacy of this technology and the distribution of lepidopteran pests in Brazil. No significant shift in C. includens susceptibility to Cry1Ac was observed eight years after commercial introduction of this technology in Brazil. F2 screen results confirmed that the frequency of Cry1Ac resistance alleles remains low and stable in C. includens. Unexpected injury caused by Rachiplusia nu (Guenée) and Crocidosema aporema (Walsingham) in MON 87701 × MON 89788 soybean was detected during the 2020/21 season, and studies confirmed a genetically based alteration in their susceptibility to Cry1Ac. MON 87701 × MON 89788 soybean remains effective against Anticarsia gemmatalis (Hübner), C. includens, Chloridea virescents (Fabricius) and Helicoverpa armigera (Hübner) in Brazil. However, there is evidence of field-evolved resistance to MON 87701 × MON 89788 soybean by the secondary soybean pests R. nu and C. aporema.

Lepidopterans as potential agents for the biological control of the invasive plant, Miconia calvescens.

This work investigated eight species of Lepidoptera associated with Miconia calvescens DC. (Myrtales: Melastomataceae) in Brazil, including six defoliators, Salbia lotanalis Druce (Lepidoptera: Pyralidae), Druentia inscita Schaus (Mimallonidae), Antiblemma leucocyma Hampson (Noctuidae), three Limacodidae species, a fruit borer Carposina cardinata Meyrick (Carposinidae), and a damager of flowers Pleuroprucha rudimentaria Guenée (Geometridae). Based on host specificity and the damage caused to plants, S. lotanalis and D. inscita are the most promising species for biological control of M. calvescens. Furthermore, if C. cardinata and P. rudimentaria have host specificity in future tests, these caterpillars could also be considered as appropriate biocontrol agents.

Influence of environmental and physical factors on capture of Tribolium castaneum (Coleoptera: Tenebrionidae) in a flour mill.

Variation in environmental and physical factors within food processing facilities can influence both the distribution of stored-product pests and trapping efficiency. Data from a long-term Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae) monitoring program was used to evaluate spatial variation in captures among trap locations and to determine relationships with environmental and physical variables. From the complete monitoring data set, different subsets were created for the cool and warm seasons, and period of time when environmental and physical factors were measured (2009-2010), with all data sets showing significant differences among trap locations in terms of beetle captures and proportion of time that traps exceeded 2.5 beetles per trap per monitoring period. There was also considerable temporal variation in distribution among the different levels of the mill. Among the environmental and physical variables measured, mean temperature and flour dust accumulation showed the most significant positive relationships with variation of beetle captures at trap locations. More beetles were captured in traps located in close proximity to milling equipment. Presence of equipment near traps was also associated with an increase in flour dust accumulation and temperature. Overall the environmental and physical factors seemed to have a limited influence on variation in captures among trap locations, with temporal variation in distribution perhaps overwhelming potential influences of local trap conditions.

Genetic structure of Tribolium castaneum (Coleoptera: Tenebrionidae) populations in mills.

The red flour beetle, Tribolium castaneum (Herbst), is primarily found associated with human structures such as wheat and rice mills. Such structures are predicted to be spatially isolated resource patches with frequent population bottlenecks that should influence their genetic structure. Genetic diversity and differentiation among nine populations of T. castaneum collected from wheat and rice mills (ranging from <1-5,700 km apart) were investigated using eight polymorphic loci (microsatellites and other insertion-deletion polymorphisms, each with 3-14 alleles). Seventy-two locus-by-population combinations were evaluated, of which 31 deviated significantly from Hardy-Weinberg equilibrium, all because of a deficiency of heterozygotes. AMOVA analysis indicated significant differences among populations, with 8.3% of the variation in allele frequency resulting from comparisons among populations, and commodity type and geographic region not significant factors. Although there were significant differences in genetic differentiation among populations (F(ST) values = 0.018-0.149), genetic distance was not significantly correlated with geographic distance. Correct assignment to the source population was successful for only 56% of individuals collected. Further analyses confirmed the occurrence of recent genetic bottlenecks in five out of nine populations. These results provide evidence that populations of T. castaneum collected from mills show spatial genetic structure, but the poor ability to assign individuals to source populations and lack of isolation by distance suggest greater levels of gene flow than predicted originally.

Sampling plan for Thrips (Thysanoptera: Thripidae) on cucumber.

This work determines the best technique, sampling unit and the number of samples to compose a sampling plan for Frankliniella schultzei (Trybom) and Thrips palmi (Karny) (Thysanoptera: Thripidae) on cucumber. The efficacy of three sampling techniques: leaf beating on a plastic tray, direct counting of insects on the lower leaf surface, and whole leaf collection in bags were compared in nine commercial cucumber crops using three sampling units (a leaf from a branch located in the apical, median or basal third of the canopy). The number of samples was determined based on the relative variance and the economic precision for the best technique and sampling unit. The direct counting of insects on the apical third of the plant canopy was the best sampling technique for F. schultzei based on one leaf surveyed per plant using 38 plants per field. The best sampling technique for T. palmi was the leaf beating on a tray using one leaf of the apical third per plant and 35 plants per field. When joining both species, the best sampling system was the direct counting on the apical third, and it requires sampling one leaf per plant using at least 35 plants per field. These results facilitate the decision-making for the management of thrips on cucumber and aggregate the benefits of the correct decision for the adoption of strategies for population reduction.

Sampling plan for Thrips (Thysanoptera: Thripidae) on cucumber / Plano de amostragem para Tripes (Thysanoptera: Thripidae) em pepino

Este trabalho determina a melhor técnica, unidade amostral e o número de amostras para compor um plano de amostragem para os tripes Frankliniella schultzei (Trybom) e Thrips palmi (Karny) em pepino. A eficácia de três técnicas de amostragem: batida de folhas em bandeja plástica branca, contagem direta de insetos na face inferior das folhas e coleta de folhas em sacola plástica foi comparada em nove cultivos comerciais de pepino, empregando três unidades amostrais (uma folha de ramo localizado nos terços apical, mediano e basal do dossel da planta). Baseado na variância relativa e precisão econômica dos melhores sistemas amostrais (melhores técnicas e unidades amostrais), calculou-se o número de amostras para a composição do plano de amostragem convencional. O sistema mais adequado para a amostragem de F. schultzei em pepino foi a contagem direta de insetos em folha do terço apical do espaldeiramento. Para tanto, deve-se amostrar uma folha por planta em 38 plantas/lavoura. Para a amostragem de T. palmi, o melhor sistema foi a batida de folha do terço apical do espaldeiramento em bandeja plástica. Na amostragem conjunta das duas espécies, o sistema mais adequado foi a contagem direta dos insetos em folha do terço apical do espaldeiramento. Nesse caso, amostra-se uma folha por planta, em 35 plantas/lavoura. Estes resultados facilitam a tomada de decisão no manejo de tripes em pepino, agregando os benefícios da decisão correta para adoção ou não de práticas de redução populacional.

This work determines the best technique, sampling unit and the number of samples to compose a sampling plan for Frankliniella schultzei (Trybom) and Thrips palmi (Karny) (Thysanoptera: Thripidae) on cucumber. The efficacy of three sampling techniques: leaf beating on a plastic tray, direct counting of insects on the lower leaf surface, and whole leaf collection in bags were compared in nine commercial cucumber crops using three sampling units (a leaf from a branch located in the apical, median or basal third of the canopy). The number of samples was determined based on the relative variance and the economic precision for the best technique and sampling unit. The direct counting of insects on the apical third of the plant canopy was the best sampling technique for F. schultzei based on one leaf surveyed per plant using 38 plants per field. The best sampling technique for T. palmi was the leaf beating on a tray using one leaf of the apical third per plant and 35 plants per field. When joining both species, the best sampling system was the direct counting on the apical third, and it requires sampling one leaf per plant using at least 35 plants per field. These results facilitate the decision-making for the management of thrips on cucumber and aggregate the benefits of the correct decision for the adoption of strategies for population reduction.

Sampling plan for Diaphania spp. (Lepidoptera: Pyralidae) and for hymenopteran parasitoids on cucumber.

The objective of this work was to determine the best technique, sampling unit, and the number of samples to compose a conventional sampling plan for the cucurbit borers, Diaphania spp. (Lepidoptera: Pyralidae), and for hymenopteran parasitoids on cucumber. This research was carried out in 10 commercial cucumber crops fields from July to December 2000 in Tocantins, Minas Gerais State, Brazil (21 degrees 11' 15" S; 42 degrees 03' 45" W; altitude 363 m). The sampling methods studied were beating on a tray, direct counting of insects on the lower leaf surface, and whole leaf collection. Three sampling units also were studied: leaves from a branch located in the apical, median, or basal third of the canopy. The best sampling systems, which included the best technique and sampling unit, were determined based on the relative variance and the economic precision of the sampling. Once the best sampling systems were established, the numbers of samples to compose the conventional sampling plans were determined. The more suitable sampling system for the larvae of Diaphania spp. in cucumber plants was beating a leaf of the median third of the canopy on a plastic tray. One leaf must be sampled for every 50 plants in a crop. The more suitable sampling system for hymenopteran parasitoids in cucumber plants was to directly count the adults on one leaf of the median third of the canopy. One leaf must be sampled for every 74 plants in a crop.