RESUMEN
Tea, the major beverage worldwide, is one of the oldest commercial commodities traded from ancient times. Apart from many of its advantages, including health, socio-economic, climatic, and agro-ecological values, FAO has recognized that the tea value chain covering its growth in the field, processing and marketing, and finally, the hot cup at the user's hand needs to be made sustainable during all these stages. Tea generates a lot of waste in different forms in different stages of its growth and processing, and these wastes, if not managed properly, may cause environmental pollution. A planned utilization of these wastes as feedstocks for various processes can generate more income, create rural livelihood opportunities, help grow tea environmentally sustainable, avoid GHG emissions, and make a real contribution to SDGs. Thermochemical and biological conversion of tea wastes generates value-added products. This review provides an overview on the impacts of the tea wastes on the environment, tea waste valorization processes, and applications of value-added products. The application of value-added products for energy generation, wastewater treatment, soil conditioners, adsorbents, biofertilizers, food additives, dietary supplements, animal feed bioactive chemicals, dye, colourant, and phytochemicals has been reviewed. Further, the challenges in sustainable utilization of tea wastes and opportunities for commercial exploitation of value-added products from tea wastes have been reviewed.
RESUMEN
In the present study, the effects of electrode surface area, proton exchange membrane area, and volume of the anodic chamber were investigated on the performance of five different dual chamber microbial fuel cells (MFC) using synthetic wastewater toward wastewater treatment coupled electricity generation. In the batch mode, the five different MFC's were operated with the anodic chamber volumes of 93-890 mL, 17.33-56.77 cm2 electrode surface area, obtained volumetric power densities of 137.72-58.13 mW/m3, and unit area power densities ranging from 27.04 to 11.94 mW/m2. Fed-batch studies were done with the MFC having 740 mL anodic chamber volume at different wastewater COD concentrations. The power density per unit area increased from 22.93 mW/m2 to 36.25 cm2 when the distance between electrodes was reduced from 10 to 6 cm. A maximum volumetric power density of 135.21 mW/m3 has been attained with a 6 cm electrode distance with the accomplished COD reduction of 93.21%. The presence of biofilm on the anode has been visualized through the SEM images. The higher COD concentration of wastewater and the fed-batch operation resulted in increased power output and wastewater treatment efficiency.
Asunto(s)
Fuentes de Energía Bioeléctrica , Purificación del Agua , Aguas Residuales , Protones , Electricidad , Electrodos , Purificación del Agua/métodosRESUMEN
The present study develops a novel concept of using waste media as an algal nutrient resource compared to the usual growth media with the aid of growth kinetics study and metabolite production abilities. Food- and agri-compost wastes are compact structures with elemental compounds for microbial media. As a part of the study, environ-burden wastes (3:1) as a food source for photosynthetic algae as a substitute for the costly nutrient media were proposed. The environment-burden waste was also envisaged for macromolecule production, i.e., 99200 µg/ml lipid, 112.5 µg/ml protein, and 8.75 µg/ml carbohydrate with different dilutions of agri-waste, bold basal media (BBM), and Food waste, respectively. The fabricated growth kinetics and dynamics showcased the unstructured models of different photosynthetic algal growth phases and the depiction of productivity and kinetic parameters. The theoretical maximum biomass concentration (Xp) was found to be more (0.871) with diluted agricompost media than the usual BBM (0.697). The XLim values were found to be 0.362, 0.323 and 0.209 for BBM, diluted agri-compost media and diluted food waste media, respectively. Overall, the study proposes a cleaner approach of utilizing the wastes as growth media through a circular economy approach which eventually reduces the growth media cost with integrated macromolecule production capabilities.
Asunto(s)
Compostaje , Microalgas , Eliminación de Residuos , Alimentos , Biocombustibles , BiomasaRESUMEN
A waste-based circular economy approach is proposed for the phycoremediation of an X-ray developer (XD) solution. The present study emphasizes the utilization of food waste (FW) and agri-compost media (ACM) as growth media for D. armatus for the subsequent bioremediation potential of XD solution-coupled lipid production. A 3:1 dilution (FW/ACM: XD.) was found to be suitable for the phycoremediation study of XD solution towards the % removal of biological oxygen demand (BOD), chemical oxygen demand (COD) and silver. The phycoremediation studies of diluted XD solution in FW demonstrated a 74.50% BOD removal, 81.69% COD removal, and 54.70% removal of silver. The growth of D. armatus in diluted XD solution in food waste was 1.37% lipid content. The phycoremediation of diluted XD solution with ACM resulted in 83.05% BOD removal, 88.88% COD removal and 56.30% silver removal with the concomitant lipid production of 1.42%. The optimal bioremediation coupled lipid production of D. armatus was observed on the 19th day of D. armatus cultivation in the developer effluent, along with food waste and agri-compost media, for 31 days. The study suggests a sustainable utilization of waste (FW and ACM) as a nutritive medium to scrutinize the phycoremediation of XD solution with a concomitant lipid production that can open up new avenues in phycoremediation coupled energy commodities production.
Asunto(s)
Microalgas , Eliminación de Residuos , Aguas Residuales/química , Rayos X , Plata , Alimentos , Lípidos , BiomasaRESUMEN
Biodiesel is an alternative, carbon-neutral fuel compared to fossil-based diesel, which can reduce greenhouse gas (GHGs) emissions. Biodiesel is a product of microorganisms, crop plants, and animal-based oil and has the potential to prosper as a sustainable and renewable energy source and tackle growing energy problems. Biodiesel has a similar composition and combustion properties to fossil diesel and thus can be directly used in internal combustion engines as an energy source at the commercial level. Since biodiesel produced using edible/non-edible crops raises concerns about food vs. fuel, high production cost, monocropping crisis, and unintended environmental effects, such as land utilization patterns, it is essential to explore new approaches, feedstock and technologies to advance the production of biodiesel and maintain its sustainability. Adopting bioengineering methods to produce biodiesel from various sources such as crop plants, yeast, algae, and plant-based waste is one of the recent technologies, which could act as a promising alternative for creating genuinely sustainable, technically feasible, and cost-competitive biodiesel. Advancements in genetic engineering have enhanced lipid production in cellulosic crops and it can be used for biodiesel generation. Bioengineering intervention to produce lipids/fat/oil (TGA) and further their chemical or enzymatic transesterification to accelerate biodiesel production has a great future. Additionally, the valorization of waste and adoption of the biorefinery concept for biodiesel production would make it eco-friendly, cost-effective, energy positive, sustainable and fit for commercialization. A life cycle assessment will not only provide a better understanding of the various approaches for biodiesel production and waste valorization in the biorefinery model to identify the best technique for the production of sustainable biodiesel, but also show a path to draw a new policy for the adoption and commercialization of biodiesel.
RESUMEN
Waste to the product approach was proposed for tuning environ-threat soybean husk towards lipolytic enzyme by integrating the invasive weed optimization with biomass and product dynamics study. The invasive weed optimization constitutes based on the non-linear regression model results in a 47 % enhancement in lipolytic enzyme using the optimization parameters of 7% Sigma Final, 9% exponent; Smax of 5 with a population size of 35 and Max. generations of 99. The biomass dynamic study showcases the dynamic parameters of 0.0239 µmax, 8.17 XLimst and 0.852 RFin values. The product dynamic studies reveal the kinetic parameters of kst, kdiv, PFin, which seem to be equal to -0.0338, 0.0896 and 68.1, respectively. Overall, the present study put forth the zero-waste (soybean husk) to the product (lipolytic enzyme) approach by introducing the novel "Invasive Weed Optimization" coupled with "Biomass and product dynamics" to the bioprocessing field.
Asunto(s)
Glycine max , Malezas , Biomasa , CinéticaRESUMEN
Metals represent a large proportion of industrial effluents, which due to their high hazardous nature and toxicity are responsible to create environmental pollution that can pose significant threat to the global flora and fauna. Strict ecological rules compromise sustainable recovery of metals from industrial effluents by replacing unsustainable and energy-consuming physical and chemical techniques. Innovative technologies based on the bioelectrochemical systems (BES) are a rapidly developing research field with proven encouraging outcomes for many industrial commodities, considering the worthy options for recovering metals from industrial effluents. BES technology platform has redox capabilities with small energy-intensive processes. The positive stigma of BES in metals recovery is addressed in this review by demonstrating the significance of BES over the current physical and chemical techniques. The mechanisms of action of BES towards metal recovery have been postulated with the schematic representation. Operational limitations in BES-based metal recovery such as biocathode and metal toxicity are deeply discussed based on the available literature results. Eventually, a progressive inspection towards a BES-based metal recovery platform with possibilities of integration with other modern technologies is foreseen to meet the real-time challenges of viable industrial commercialization.
Asunto(s)
Fuentes de Energía Bioeléctrica , Metales , ReciclajeRESUMEN
As a consequence of expanded science and technical research, the market perception of consumers has shifted from standard traditional to valuable foods, which are furthermore nutritional as well as healthier in today's world. This food concept, precisely referred to as functional, focuses on including probiotics, which enhance immune system activity, cognitive response, and overall health. This review primarily focuses on functional foods as functional additives in beverages and other food items that can regulate the human immune system and avert any possibility of contracting the infection. Many safety concerns must be resolved during their administration. Functional foods must have an adequate amount of specific probiotic strain(s) during their use and storage, as good viability is needed for optimum functionality of the probiotic. Thus, when developing novel functional food-based formulations, choosing a strain with strong technological properties is crucial. The present review focused on probiotics as an active ingredient in different beverage formulations and the exerting mechanism of action and fate of probiotics in the human body. Moreover, a comprehensive overview of the regulative and safety issues of probiotics-based foods and beverages formulations.
Asunto(s)
Bebidas , Alimentos Funcionales , Tecnología , Animales , Alimentos Fermentados , Salud , Humanos , ProbióticosRESUMEN
A variety of pathogenic microorganisms can survive in the drinking water distribution systems (DWDS) by forming stable biofilms and, thus, continually disseminating their population through the system's dynamic water bodies. The ingestion of the pathogen-contaminated water could trigger a broad spectrum of illnesses and well-being-related obstacles. These waterborne diseases are a significant concern for babies, pregnant women, and significantly low-immune individuals. This review highlights the recent advances in understanding the microbiological aspects of drinking water quality, biofilm formation and its dynamics, health issues caused by the emerging microbes in biofilm, and approaches for biofilm investigation its prevention and suppression in DWDS.
Asunto(s)
Biopelículas/crecimiento & desarrollo , Agua Potable/microbiología , Enfermedades Transmitidas por el Agua/microbiología , Humanos , Vigilancia de la Población , Salud Pública , Enfermedades Transmitidas por el Agua/epidemiología , Enfermedades Transmitidas por el Agua/prevención & controlRESUMEN
Modernization in the crop cultivation and development of high yielding varieties resulted in increased crop residues. A large portion of crop residues is not handled appropriately, which leads to environmental burden on society. The crop residues are rich in organic substances, which can be better utilized for various purposes, including energy generation. The utilization of crop residues for energy generation has partially contributed to resolve the inappropriate handling practices, thus reducing their environmental impacts. Life cycle assessment (LCA) is used as a tool to investigate environmental sustainability and can be explored to integrate with social and economic effects to quantify environmental impacts for energy generation from crop residues. This review will provide a comprehensive understanding on LCA inference for decision support to policy-makers and different relevant choices to various applications for sustainable energy generation from crop residues.
Asunto(s)
Ambiente , Energía RenovableRESUMEN
Bioelectrochemical systems (BESs) have been intensively investigated over the last decade owing to its wide-scale environmentally friendly applications, among which wastewater treatment, power generation and environmental monitoring for pollutants are prominent. Different variants of BES such as microbial fuel cell, microbial electrolysis cell, microbial desalination cell, enzymatic fuel cell, microbial solar cell, have been studied. These microbial bioelectrocatalytic systems have clear advantages over the existing analytical techniques for sustainable on-site application in wide environmental conditions with minimum human intervention, making the technology irrevocable and economically feasible. The key challenges to establish this technology are to achieve stable and efficient interaction between the electrode surface and microorganisms, reduction of time for start-up and toxic-shock recovery, sensitivity improvement in real-time conditions, device miniaturization and its long-term economically feasible commercial application. This review article summarizes the recent technical progress regarding bio-electrocatalytic processes and the implementation of BESs as a biosensor for determining various compositional characteristics of water and wastewater.
Asunto(s)
Técnicas Biosensibles , Agua/metabolismo , Animales , Fenómenos Bioquímicos , Fuentes de Energía Bioeléctrica , Electrodos , Electrólisis , Humanos , Purificación del AguaRESUMEN
The study presents the comparative bioelectrochemical treatment of phenol in anodic and cathodic compartments of four identical dual chambered microbial fuel cells (MFCs) with bare and multiwalled carbon nanotube/polypyrrole (MWCNT/PPy)-coated electrodes, respectively. It was observed that systems performing biocathodic treatment of phenol performed better as compared to the systems performing bioanodic treatment. The maximum power densities for bioanodic phenol treatment using bare and coated electrodes were found to be 469.038 and 560.719 mW/m2, while for biocathodic treatment, they were observed to be 604.804 and 650.557 mW/m2, respectively. The MFCs performing biocathodic treatment of phenol consistently showed higher chemical oxygen demand removal efficiency, Coulombic efficiency, and power density and indicated the better performance of the biocathodic bare (B-MFC) and coated (C-MFC) MFCs as compared to the bioanodic B-MFC and C-MFC. UV/vis spectrophotometry revealed that the MWCNT/PPy-coated carbon paper worked significantly better in the treatment of phenol with admirable treatment obtained within a week of the experiment as compared to the system with bare carbon paper. Cyclic voltammetry asserted better electrochemical activity of the MFC systems with coated electrodes in the treatment of phenol. The electrochemical impedance spectroscopy data also supported the better performance of biocathodic phenol treatment with lower internal and charge transfer resistances. The scanning electron microscopy images confirmed the active biofilm formation on the electrode surface. The study indicates MFC as a viable option for the treatment of recalcitrant chemical compounds with energy recovery.
RESUMEN
The petroleum refinery wastewater which is a product of petroleum refinery has a high organic content. This study explores the utilization of petroleum refinery wastewater collected from petroleum refinery as a resource for bioelectricity generation and using this energy for salt removal from seawater in a hydraulically connected osmotic microbial fuel cell (OsMFC) and up flow microbial desalination cell (UMDC). Anaerobic mixed sludge was used in the anodic chamber of OsMFC and UMDC. Petroleum refinery wastewater was fed first into the OsMFC and then transferred to the UMDC. The OsMFC and UMDC were connected to 1000 and 100 Ω external resistance respectively. Experimental results showed that the combined system could remove 93% of chemical oxygen demand (COD) from the petroleum refinery wastewater whilst 48% salts were removed from the seawater. Experimental results showed that this complex wastewater can be treated and produce bioelectricity, with COD removal and salt removal. The hydraulically connected OsMFC and up flow MDC provide a suitable platform for wastewater treatment and seawater desalination.
Asunto(s)
Fuentes de Energía Bioeléctrica , Petróleo , Purificación del Agua , Agua de Mar , Aguas ResidualesRESUMEN
Fresh water is a fundamental source for humans, hence the recent shrinkage in freshwater and increase in water pollution are imperative problems that vigorously affect the people and the environment worldwide. The breakneck industrialization contributes to the procreation of substantial abundance of wastewater and its treatment becomes highly indispensable. Perchlorate and nitrate containing wastewaters poses a serious threat to human health and environment. Conventional biological treatment methods are expensive and also not effective for treating wastewater effectively and incapable of in situ bioremediation. Bioelectrochemical systems are emerging as a new technology platform for a sustainable removal of such contaminants from wastewater streams. This article reviews the state of art of bioelectroremediation of contaminated waters with perchlorate and nitrate. Different aspects of this technology such as configuration and design, mode of operation and type of substrate are considered in detail.
Asunto(s)
Percloratos , Contaminantes Químicos del Agua , Purificación del Agua , Biodegradación Ambiental , Humanos , Nitratos , AguaRESUMEN
A novel two chamber up-flow microbial desalination cell (UMDC) was designed for evaluating desalination of real seawater with simultaneous wastewater treatment and energy generation. Two UMDCs were hydraulically connected in continuous flow mode (cascade mode) and operated at ten different hydraulic retention times (HRTs) [120 h to 12 h] and salt retention times (SRTs) [40 h to 4 h] for improved performance of chemical oxygen demand (COD) and salt removal. These UMDCs were operated at different combinations of high power (higher external resistance) and high current (low external resistance) mode to find the most suitable conditions for obtaining higher COD removal, salt removal, power production and current generation. The optimum HRT and SRT were 60 h and 40 h, respectively. The highest salt removal achieved was 72% at SRT of 40, while the highest COD removal was 83% at a HRT of 60 h. A maximum current density of 2.375 A/m2 was obtained, while the maximum power density was 5.879 W/m2. The obtained results give an overlook for the scale up of UMDCs in the future. In the entire system, membrane fouling is still a major problem. As the operation time increases, this resulted in low power generation and low salt removal efficiency. The UMDCs can function as sustainable and alternative solution for real wastewater treatment and seawater desalination with resource recovery and power production.
Asunto(s)
Fuentes de Energía Bioeléctrica/microbiología , Agua de Mar/química , Cloruro de Sodio/análisis , Aguas Residuales/química , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Análisis de la Demanda Biológica de OxígenoRESUMEN
The aim of the present work was to characterize the impedance response of an air-cathode MFC operating in a continuous mode and to determine intrinsic properties that define its performance which are crucial to be controlled for scalability purposes. The limiting step on electricity generation is the anodic electrochemically-active biofilm, independently of the external resistance, Rext, utilized. However, for Rext below 3 kΩ the internal impedance of the bioanode remained invariable, in good correspondence to the power density profile. The hydraulic retention time (HRT) had an effect on the impedance of both the bioanode and the air-cathode and especially on the overall MFC. The lowest HRT at which the MFC was operable was 3h. Yet, the variation on the HRT did not have a significant impact on power generation. A two constant phase element-model was associated with the EIS response of both bioanode and air-cathode, respectively. Consistency was found between the CPE behaviour and the normal power-law distribution of local resistivity with a uniform dielectric constant, which represented consistent values with the electrical double layer, the Nernst diffusion layer and presumably the biofilm thickness. These results have future implications on MFC monitoring and control, as well as in providing critical parameters for scale-up.
Asunto(s)
Fuentes de Energía Bioeléctrica , Aire , Difusión , Capacidad Eléctrica , Impedancia Eléctrica , Electrodos , Transporte de Electrón , HidrodinámicaRESUMEN
In this study, a dual chamber MFC was constructed for simultaneous removal of organic matter and nitrogenous pollutants and bioelectricity generation from synthetic and complex industrial wastewaters and it was operated in batch and continuous mode. When the cell potential was stable after 16 days of batch mode operation, the MFC was converted to continuous mode (from batch mode) and operated for 125 days with different organic loading rates (OLR) and ammonia loading rates (ALR) and fixed hydraulic retention time (HRT) of 40 h. The OLR of 1.49 kg COD m(-3) d(-1) and ALR of 0.58 kg NH3(-) m(-3) d(-1), for anodic and cathodic chambers, respectively, gave the best results. The highest value of cell potential on these OLRs was 310 mV with current density of 85.11 mA m(-2), power density of 26.38 mW m(-2) and volumetric power density of 192.20 mW m(-3). During this period, COD reduction was 78-83% in the anodic chamber and the ammonia reduction was 36-38%. After stable operation with synthetic wastewater one case study was performed with complex industrial wastewater. Continuous mode operation was performed at two different OLR and HRT with a constant ALR. A stable power density and volumetric power density of 23.56 mW m(-2) and 112.50 mW m(-3), respectively were achieved after 24 days of continuous operation at an OLR of 0.35 kg COD/m(3) day with an ALR of 0.43 kg NH3(-) m(-3) day(-1) and corresponding HRT of 68 h. A maximum of 89% COD removal and 40% removal of ammonia was obtained after 50 days. A stable voltage of 300 mV was obtained across 1000 Ω resistance. These findings suggest that BMFC can be used for the treatment of industrial wastewater, with carbon removal in anodic chamber and electricity generation.
Asunto(s)
Amoníaco/metabolismo , Bacterias/metabolismo , Fuentes de Energía Bioeléctrica/microbiología , Compuestos Orgánicos/metabolismo , Aguas Residuales/química , Contaminantes Químicos del Agua/metabolismo , Purificación del Agua/métodos , Amoníaco/química , Bacterias/química , Biodegradación Ambiental , Electricidad , Compuestos Orgánicos/química , Aguas Residuales/microbiología , Contaminantes Químicos del Agua/química , Purificación del Agua/instrumentaciónRESUMEN
The present critical review aims to portray the principles and theoretical foundations that have been used for the application of electrochemical impedance spectroscopy (EIS) to study electron-transfer mechanisms, mass transfer phenomena and distribution of the heterogeneous properties of microbial electrochemical systems (MXCs). Over the past eight years, the application of this method has allowed major breakthroughs, especially in the field of microbial fuel cells (MFCs); however, it is still most widely extended only to the calculation of internal resistances. The use and interpretation of EIS should greatly improve since the intrinsic knowledge of this field, and efforts and current trends in this field have already allowed its understanding based on rather meaningful physical properties and not only on fitting electrical analogues. From this perspective, the use, analysis and interpretation of EIS applied to the study of MXCs are critically examined. Together with the revision of more than 150 articles directly devoted to this topic, two examples of the correct and improved analysis of EIS data are extensively presented. The first one focuses on the use of graphical methods for improving EIS analysis and the other one concentrates on the elucidation of the constant phase element (CPE) parameters. CPEs have been introduced in equivalent circuit models, sometimes without solid justification or analysis; the effective capacitance has been obtained from CPE parameters, following an unsuitable theory for the case of microbial-electrochemical interfaces. The use of CPE is reviewed in terms of meaningful physical parameters, such as biofilm thickness. The use of a finite-diffusion element is reviewed throughout estimation of accurate values for obtaining the dimensionless numbers, Schmidt and Sherwood, in the context of a dioxygen-reducing-biocathode, under different flow-rate conditions. The use and analysis of EIS in this context are still emerging, but because of the promising potential of MXCs in renewable power generation, wastewater treatment and energy-positive biorefining, among other applications, it becomes necessary to boost our global capacities for the application of EIS-and especially its interpretation-so that we achieve a better understanding and optimization of these systems.
Asunto(s)
Espectroscopía Dieléctrica/métodos , Electroquímica/métodos , Microbiología , Humanos , CinéticaRESUMEN
The aim of this study was to investigate the feasibility of using agar salt bridges for proton transport in Microbial Fuel Cells (MFC). It also tries to elucidate and effect of mediators on electricity production from wastewaters through experimentation using a simulated wastewater. In order to offset the very high cost of proton exchange membrane, salt bridges have been used in dual chamber MFCs. When the concentration of salt was varied in agar salt bridges from 1% to 10%, the volumetric power density changed from 1.71 to 84.99 mW/m(3) with a concomitant variation in power density from 0.32 to 16.02 mW/m(2). The maximum power density was observed at 5% salt concentration with 10% agar, which was accompanied by 88.41% COD reduction. In the case of methylene blue (0.01 mM) as the electron mediator, the voltage and current generation were 0.551 V and 0.47 mA, respectively. A maximum open circuit voltage of 0.718 V was seen at 0.08 mM methylene blue concentration, whereas maximum power densities of 17.59 mW/m(2) and 89.22 mW/m(3) were obtained. Different concentrations of neutral red were also tried out as mediators. A maximum open circuit voltage of 0.730 V was seen at 0.01 mM neutral red, corresponding to a power density of 12.02 mW/m(2) (volumetric power density of 60.97 mW/m(3)). Biofilm formation on the electrode surface was not observed in the presence of mediators, but was present in the absence of mediators. The results clearly demonstrated the feasibility to use agar salt bridge for proton transport and role of mediators in MFCs to generate electricity.