RESUMEN
Due to its hardness, strength, and transparency, sapphire is an attractive material for the construction of microfluidic devices intended for high-pressure applications, but its physiochemical properties resist traditional microfabrication and bonding techniques. Here a femtosecond pulsed laser was used to directly machine fluidic channels within sapphire substrates and to form bonds between machined and flat sapphire windows, resulting in the creation of sealed microfluidic devices. Sapphire-sapphire bond strength was determined by destructive mechanical testing, and the integrity of the bond was verified by the capillary filling of the channel with air and ethanol. This combination of optical micromachining and bonding establishes a fully integrated approach to the fabrication of sapphire-based microfluidic systems.
RESUMEN
The hierarchical and anisotropic mechanical behavior requirement of load-bearing soft tissues limits the utility of conventional elastomeric materials as a replacement for soft-tissue materials. Liquid-crystal elastomers (LCEs) have the potential to excel in this regard owing to its unique combination of mesogenic order in an elastomeric network. In this study, the mechanical behavior of the LCEs relevant to load-bearing biomedical applications was explored. LCEs with different network orientations (i.e., mesogen alignments) were investigated by fabricating the LCEs with polydomain and monodomain configurations. The polydomain and monodomain LCEs with the same degree of network crosslinking demonstrated diverse mechanical behavior, ranging from highly stiff and elastic nature to high damping capacity, depending on the loading direction with respect to the network alignment. The LCEs were also capable of matching the anisotropic mechanical behavior of an intervertebral disc. Additional studies were conducted on the in vivo biological response of LCEs upon subcutaneous implantation, as well as on the effect of the exposure to an in vitro simulated physiological environment on the mechanical behavior. The LCEs' mechanical response was negligibly affected when exposed to biomedically relevant conditions. Furthermore, the solid and porous LCEs did not show any adverse effect on the surrounding tissues when implanted subcutaneously in rats. The biological response allows for tissue ingrowth and helps illustrate their utility in implantable biological devices. Finally, the utility of LCEs to mimic the mechanical function of biological tissue such as intervertebral disc was demonstrated by fabricating a proof of concept total disc replacement device.
Asunto(s)
Elastómeros , Disco Intervertebral , Cristales Líquidos , Animales , Porosidad , Prótesis e Implantes , RatasRESUMEN
Advancements in the microfabrication of soft materials have enabled the creation of increasingly sophisticated functional synthetic tissue structures for a myriad of tissue engineering applications. A challenge facing the field is mimicking the complex microarchitecture necessary to recapitulate proper morphology and function of many endogenous tissue constructs. This paper describes the creation of PEGDA hydrogel microenvironments (microgels) that maintain a high level of viability at single cell patterning scales and can be integrated into composite scaffolds with tunable modulus. PEGDA was stereolithographically patterned using a digital micromirror device to print single cell microgels at progressively decreasing length scales. The effect of feature size on cell viability was assessed and inert gas purging was introduced to preserve viability. A composite PEGDA scaffold created by this technique was mechanically tested and found to enable dynamic adjustability of the modulus. Together this approach advances the ability to microfabricate tissues that better mimic native constructs on cellular and subcellular length scales.