RESUMEN
INTRODUCTION: Vascular reconstruction requires technical expertise and is often time consuming. As a novel alternative to traditional hand-sewn vascular anastomoses, the VasoLock (VL), is a nonabsorbable, sutureless anastomosis device with traction anchors designed to hold free artery ends together. These anchors do not penetrate the vessel wall but adhere by leveraging the elasticity of the vessels to fasten blood vessels together. This pilot study assesses the performance and patency of this novel device in a porcine model of femoral artery injury. METHODS: Female swine (n = 7) underwent femoral artery exposure for a total of 10 VL implanted. Study animals underwent hemodilution to a target hematocrit of 15% and ROTEM was used to assess coagulopathy, followed by an arterial injury via transection. The VL was inserted without any sutures. Flow-probe monitors were positioned proximal and distal to the device and flow rates were measured continuously for a total of 90 min. Flow was analyzed and presented as a ratio of distal to proximal flow with the slope of this ratio across time subsequently determined. Angiographic assessment was completed to evaluate for patency and technical complications after 90 min of implant. RESULTS: The average animal weight was 44.1 ± 3.2 kg. The average mean arterial pressure at the time of implant was 51.2 ± 7.8 mmHg, median heart rate was 77.4 (IQR = 77.25-157.4) beats per minute, and average temperature was 36.1 ± 1.5°C. The baseline hematocrit was 13.5 ± 3.0%, average pH was 7.20 ± 0.1, average clotting time was 154.1 ± 58.7 s and average clot formation time was 103.4 ± 10.9 s all demonstrating the acidotic, hypothermic, and coagulopathic state of the swine at the time of insertion. During the 90-min observation period, the average flow gradient identified across the VL was 0.99 ± 0.24, indicating no significant change in flow across the VL. The average slope of the gradients was 0.0005 (P = 0.22), suggesting the ratio of proximal and distal flow did not change over the 90 min. Following 90 min of dwell time, all VL were patent without technical complication. Angiographic assessment at 90 min demonstrated no evidence of dissection, device migration, arterial extravasation, or thromboembolism with any of the 10 devices. CONCLUSIONS: This pilot study demonstrated technical feasibility of the novel VL device over a 90-min observation period. All VL were patent and no negative events or complications were identified. This technology demonstrated significant promise in a coagulopathic state: additional investigation, involving long-term survival, is warranted for further validation.
Asunto(s)
Arteria Femoral , Femenino , Animales , Porcinos , Prueba de Estudio Conceptual , Proyectos Piloto , Grado de Desobstrucción Vascular , Anastomosis Quirúrgica , Arteria Femoral/cirugíaRESUMEN
International guidelines advise people with diabetes to wear close-toed, thick-soled footwear to protect against foot ulceration. However, this type of footwear is incompatible with some of the cultures, climates, and socioeconomic conditions in many low- and middle-income countries (LMICs). This scoping review aims to summarize what is known about footwear used by people with diabetes in LMICs and consider whether international diabetic foot guidelines are practical and actionable in these contexts, given current practices. PubMed, CINAHL, Scopus, Embase, Web of Science, Latin American and Caribbean Health Sciences Literature, and African Journals Online were searched for articles that documented the footwear used by people with diabetes in LMICs. Twenty-five studies from 13 countries were eligible for inclusion and indicated that a large proportion of people with diabetes wear footwear that is considered inappropriate by current guidance, with sandals and flip-flops being popular choices in a majority of the studies. Reasons given for these choices include poverty, lack of awareness of and provider communication about the importance of footwear selection, comfort, and cultural norms. We recommend that LMIC health care systems relying on international guidelines critically consider whether their recommendations are sensible in their settings. Diabetic foot experts and LMIC-based health care stakeholders should collaborate to design alternative guidelines, strategies, and interventions specifically for LMIC contexts to increase preventative practice feasibility and uptake.
Asunto(s)
Diabetes Mellitus , Pie Diabético , Humanos , Pie Diabético/etiología , Pie Diabético/prevención & control , Países en Desarrollo , Úlcera , Pobreza , Región del CaribeRESUMEN
BACKGROUND: Mechanical ventilators are essential to patients who become critically ill with acute respiratory distress syndrome (ARDS), and shortages have been reported due to the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). METHODS: We utilized 3D printing (3DP) technology to rapidly prototype and test critical components for a novel ventilator multiplexer system, Vent-Lock, to split one ventilator or anesthesia gas machine between two patients. FloRest, a novel 3DP flow restrictor, provides clinicians control of tidal volumes and positive end expiratory pressure (PEEP), using the 3DP manometer adaptor to monitor pressures. We tested the ventilator splitter circuit in simulation centers between artificial lungs and used an anesthesia gas machine to successfully ventilate two swine. RESULTS: As one of the first studies to demonstrate splitting one anesthesia gas machine between two swine, we present proof-of-concept of a de novo, closed, multiplexing system, with flow restriction for potential individualized patient therapy. CONCLUSIONS: While possible, due to the complexity, need for experienced operators, and associated risks, ventilator multiplexing should only be reserved for urgent situations with no other alternatives. Our report underscores the initial design and engineering considerations required for rapid medical device prototyping via 3D printing in limited resource environments, including considerations for design, material selection, production, and distribution. We note that optimization of engineering may minimize 3D printing production risks but may not address the inherent risks of the device or change its indications. Thus, our case report provides insights to inform future rapid prototyping of medical devices.
RESUMEN
BACKGROUND: Recent advances in three-dimensional (3D) printing and augmented reality (AR) have expanded anatomical modeling possibilities for caregiver craniosynostosis education. The purpose of this study is to characterize caregiver preferences regarding these visual models and determine the impact of these models on caregiver understanding of craniosynostosis. METHODS: The authors constructed 3D-printed and AR craniosynostosis models, which were randomly presented in a cross-sectional survey. Caregivers rated each model's utility in learning about craniosynostosis, learning about skull anatomy, viewing an abnormal head shape, easing anxiety, and increasing trust in the surgeon in comparison to a two-dimensional (2D) diagram. Furthermore, caregivers were asked to identify the fused suture on each model and indicate their preference for generic versus patient-specific models. RESULTS: A total of 412 craniosynostosis caregivers completed the survey (mean age 33âyears, 56% Caucasian, 51% male). Caregivers preferred interactive, patient-specific 3D-printed or AR models over 2D diagrams (mean score difference 3D-printed to 2D: 0.16, Pâ<â0.05; mean score difference AR to 2D: 0.17, Pâ<â0.01) for learning about craniosynostosis, with no significant difference in preference between 3D-printed and AR models. Caregiver detection accuracy of the fused suture on the sagittal model was 19% higher with the 3D-printed model than with the AR model (Pâ<â0.05) and 17% higher with the 3D-printed model than with the 2D diagram (Pâ<â0.05). CONCLUSIONS: Our findings indicate that craniosynostosis caregivers prefer 3D-printed or AR models over 2D diagrams in learning about craniosynostosis. Future craniosynostosis skull models with increased user interactivity and patient-specific components can better suit caregiver preferences.
Asunto(s)
Realidad Aumentada , Craneosinostosis , Adulto , Cuidadores , Estudios Transversales , Femenino , Humanos , Imagenología Tridimensional , Masculino , Modelos Anatómicos , Impresión Tridimensional , CráneoRESUMEN
Vascular anastomoses typically involve a handsewn technique requiring significant surgical training, expertise, and time. The aim of our systematic review was to identify and describe sutureless vascular anastomosis techniques. We performed a systematic review of all sutureless vascular anastomosis technologies published in MEDLINE, PubMed, Embase, CINAHL, Cochrane, Web of Science, and Scopus Library databases and a patent review using US Patent and Trade Office Application, US Patent and Trademark Office Patent, Google Patents, Lens, Patent Quality Through Artificial Intelligence, SureChEMBL, and E-Space Net. Data from inclusion studies and patents published between January 1, 1980 and July 15, 2021 were abstracted to describe their category, anastomosis type and configuration, study types, and advantages and disadvantages encountered with each technology. Two hundred eleven original studies and 475 patents describing sutureless vascular anastomosis technologies were identified. In the literature, stents/stent-grafts/grafts (nâ¯=â¯61), lasers (nâ¯=â¯53), and couplers (nâ¯=â¯27) were the predominant device categories. In the patent review, adhesive technologies (nâ¯=â¯103), stents/stent-grafts/grafts (nâ¯=â¯68), and mechanical connectors (nâ¯=â¯61) predominated. The majority of studies involved in vivo animal studies (nâ¯=â¯193); 32.2% (nâ¯=â¯68) of investigations involved human trials; and 17.9% (nâ¯=â¯85) of patent technologies were approved by the US Food and Drug Administration. The main advantages described for sutureless anastomosis technologies included faster procedure time and greater patency rates compared with handsewn anastomoses. The main disadvantages included reduced vessel compliance, stenosis, leakage, and device costs. The appeal of sutureless technology is substantiated by numerous animal trials, but their use in humans remains limited. This may be a reflection of strict regulatory criteria and/or vascular complications associated with currently available technologies.
Asunto(s)
Inteligencia Artificial , Stents , Anastomosis Quirúrgica , Animales , Humanos , Tecnología , Grado de Desobstrucción VascularRESUMEN
BACKGROUND: Physicians are at the forefront of identifying innovative targets to address current medical needs. 3D printing technology has emerged as a state-of-the-art method of prototyping medical devices or producing patient-specific models that is more cost-efficient, with faster turnaround time, in comparison to traditional prototype manufacturing. However, initiating 3D printing projects can be daunting due to the engineering learning curve, including the number of methodologies, variables, and techniques for printing from which to choose. To help address these challenges, we sought to create a guide for physicians interested in venturing into 3D printing. STUDY DESIGN: All commercially available, plug-and-play, material and stereolithography printers costing less than $15,000 were identified via web search. Companies were contacted to obtain quotes and information sheets for all printer models. The qualifying printers' manufacturer specification sheets were reviewed, and pertinent variables were extracted. RESULTS: We reviewed 309 commercially available printers and materials and identified 118 printers appropriate for clinicians desiring plug-and-play models for accelerated device production. We synthesized this information into a decision-making tool to choose the appropriate parameters based on project goals. CONCLUSIONS: There is a growing clinical need for medical devices to reduce costs of care and increase access to personalized treatments; however, the learning curve may be daunting for surgeons. In this review paper, we introduce the "3Ms of 3D printing" for medical professionals and provide tools and data sheets for selection of commercially available, affordable, plug-and-play 3D printers appropriate for surgeons interested in innovation.
Asunto(s)
Diseño de Equipo , Impresión Tridimensional/instrumentación , Prótesis e Implantes , Equipo Quirúrgico , HumanosRESUMEN
BACKGROUND: Neuroprosthetic devices controlled by persons with standard limb amputation often lack the dexterity of the physiological limb due to limitations of both the user's ability to output accurate control signals and the control system's ability to formulate dynamic trajectories from those signals. To restore full limb functionality to persons with amputation, it is necessary to first deduce and quantify the motor performance of the missing limbs, then meet these performance requirements through direct, volitional control of neuroprosthetic devices. METHODS: We develop a neuromuscular modeling and optimization paradigm for the agonist-antagonist myoneural interface, a novel tissue architecture and neural interface for the control of myoelectric prostheses, that enables it to generate virtual joint trajectories coordinated with an intact biological joint at full physiologically-relevant movement bandwidth. In this investigation, a baseline of performance is first established in a population of non-amputee control subjects ([Formula: see text]). Then, a neuromuscular modeling and optimization technique is advanced that allows unilateral AMI amputation subjects ([Formula: see text]) and standard amputation subjects ([Formula: see text]) to generate virtual subtalar prosthetic joint kinematics using measured surface electromyography (sEMG) signals generated by musculature within the affected leg residuum. RESULTS: Using their optimized neuromuscular subtalar models under blindfolded conditions with only proprioceptive feedback, AMI amputation subjects demonstrate bilateral subtalar coordination accuracy not significantly different from that of the non-amputee control group (Kolmogorov-Smirnov test, [Formula: see text]) while standard amputation subjects demonstrate significantly poorer performance (Kolmogorov-Smirnov test, [Formula: see text]). CONCLUSIONS: These results suggest that the absence of an intact biological joint does not necessarily remove the ability to produce neurophysical signals with sufficient information to reconstruct physiological movements. Further, the seamless manner in which virtual and intact biological joints are shown to coordinate reinforces the theory that desired movement trajectories are mentally formulated in an abstract task space which does not depend on physical limb configurations.
Asunto(s)
Algoritmos , Miembros Artificiales , Retroalimentación Sensorial/fisiología , Músculo Esquelético/fisiopatología , Desempeño Psicomotor/fisiología , Adulto , Amputación Quirúrgica , Fenómenos Biomecánicos , Electromiografía/métodos , Femenino , Humanos , Masculino , Persona de Mediana Edad , Modelos Neurológicos , Movimiento/fisiología , Procesamiento de Señales Asistido por Computador , Interfaz Usuario-ComputadorRESUMEN
Microtia reconstruction through manual carving of autologous rib cartilage has a steep learning curve, is operator dependent, is time consuming, requires multiple stages, and frequently results in suboptimal results with poor patient satisfaction. The use of temporoparietal fascia over polypropylene implants achieves excellent cosmetic outcomes in a single stage, although is burdened by infection and extrusion in some cases. We describe the development of a hybrid technique with a novel device that allows for standardization of the cartilaginous construct, minimization of the need for donor cartilage and operative time, and minimization of the number of stages. Clinical Trial: NCT03624608.
Asunto(s)
Microtia Congénita/cirugía , Cartílago Costal/trasplante , Procedimientos de Cirugía Plástica/instrumentación , Procedimientos de Cirugía Plástica/métodos , Disección/instrumentación , Disección/métodos , Humanos , Tempo Operativo , Trasplante Autólogo/métodosRESUMEN
Soft robotic fingers have shown great potential for use in prostheses due to their inherent compliant, light, and dexterous nature. Recent advancements in sensor technology for soft robotic systems showcase their ability to perceive and respond to static cues. However, most of the soft fingers for use in prosthetic applications are not equipped with sensors which have the ability to perceive texture like humans can. In this work, we present a dexterous, soft, biomimetic solution which is capable of discrimination of textures. We fabricated a soft finger with two individually controllable degrees of freedom with a tactile sensor embedded at the fingertip. The output of the tac- tile sensor, as texture plates were palpated, was converted into spikes, mimicking the behavior of a biological mechanoreceptor. We explored the spatial properties of the textures captured in the form of spiking patterns by generating spatial event plots and analyzing the similarity between spike trains generated for each texture. Unique features representative of the different textures were then extracted from the spikes and input to a classifier. The textures were successfully classified with an accuracy of 94% when palpating at a rate of 42 mm/s. This work demonstrates the potential of providing amputees with a soft finger with sensing capabilities, which could potentially help discriminate between different objects and surfaces during activities of daily living (ADL) through palpation.
Asunto(s)
Actividades Cotidianas , Miembros Artificiales , Materiales Biomiméticos , Dedos , Robótica , Tacto , Diseño de Equipo , HumanosRESUMEN
A major challenge for upper limb amputees is discomfort due to improper socket fit on the residual limb during daily use of their prosthesis. Our work introduces the implementation of soft robotic actuators into a prosthetic socket. The soft actuators are a type of electrically-powered actuator. The actuator is driven through changes in internal temperature causing actuation due to vapor pressure, which results in high and reliable force outputs. A regression fit was generated to model how the smart polymer's temperature relates to force output, and the model was cross-validated based on training data collected from each actuator. A proportional integral (PI) controller regulated the force exerted by the actuators based off of tactile and temperature feedback. Results showed that a socket system can be integrated with smart polymers and sensors, and demonstrated the ability to control two actuators and reach desired forces from set temperatures.
Asunto(s)
Miembros Artificiales , Diseño de Prótesis , Polímeros de Estímulo Receptivo/química , Extremidad Superior/fisiología , Humanos , TemperaturaRESUMEN
Amputees often find wearing a prosthetic limb for a long period of time uncomfortable. Prosthetic sockets that adjust the socket's fit automatically, or adaptive sockets, would encourage amputees to wear their prosthesis more frequently. In this work, we simulate the control system design of a Multiple-Input, Multiple-Output (MIMO) adaptive socket using principles of optimal control and robust control. A data-driven model of the socket-limb interface is first obtained by applying regression to open-loop recordings of the socket interacting with the limb during a simulated grasping task. A MIMO controller is then designed to maintain a desired uniform socket fit. An $H_{\infty}$ controller, obtained from loop shaping synthesis using the Glover-McFarlane method, is shown to perform comparably to a Linear Quadratic Gaussian (LQG) controller while maintaining robustness to uncertainties in the socket-limb interface model. This work then outlines a potential procedure on how to develop the control system for a real adaptive prosthetic socket with multiple sensors and actuators.
Asunto(s)
Miembros Artificiales , Amputados , Humanos , Diseño de PrótesisRESUMEN
A continuing problem faced by amputees is that extended use of a prosthesis leads to discomfort along the residual limb. In this work, we use a novel pressure sensor array and an inertial measuring unit to monitor the changes in the pressure distribution within an upper limb socket in response to its position and the real time performance of a grasping task. These experiments illustrate that the operation of a prosthetic hand produces distinct features in the time derivative and spatial component of the sensor outputs, which correspond to the orientation and task-dependent changes in loading conditions within the socket. The significance of this study is that it highlights the use of a combined pressure sensor array and inertial measuring unit as a way to characterize the loading conditions within a prosthesis based on both temporal and spatial information during movement. This method of real time pressure sensing in prosthetic sockets will be useful for adaptive socket technology aimed towards decreasing the discomfort caused by long-term use of a prosthesis.