RESUMEN
The selective capture of methane (CH4) at low concentrations and its separation from N2 are extremely challenging owing to the weak host-guest interactions between CH4 molecules and any sorbent material. Here, we report the exceptional adsorption of CH4 at low pressure and the efficient separation of CH4/N2 by MFM-300(Fe). MFM-300(Fe) shows a very high uptake for CH4 of 0.85â mmol g-1 at 1â mbar and 298â K and a record CH4/N2 selectivity of 45 for porous solids, representing a new benchmark for CH4 capture and CH4/N2 separation. The excellent separation of CH4/N2 by MFM-300(Fe) has been confirmed by dynamic breakthrough experiments. Inâ situ neutron powder diffraction, and solid-state nuclear magnetic resonance and diffuse reflectance infrared Fourier transform spectroscopies, coupled with modelling, reveal a unique and strong binding of CH4 molecules involving Fe-OHâ¯CH4 and Câ¯phenyl ring interactions within the pores of MFM-300(Fe), thus promoting the exceptional adsorption of CH4 at low pressure.
RESUMEN
Electrochemcial reduction of CO2 to multi-carbon (C2+) products is an important but challenging task. Here, we report the control of structural evolution of two porous Cu(ii)-based materials (HKUST-1 and CuMOP, MOP = metal-organic polyhedra) under electrochemical conditions by adsorption of 7,7,8,8-tetracyanoquinodimethane (TNCQ) as an additional electron acceptor. The formation of Cu(i) and Cu(0) species during the structural evolution has been confirmed and analysed by powder X-ray diffraction, and by EPR, Raman, XPS, IR and UV-vis spectroscopies. An electrode decorated with evolved TCNQ@CuMOP shows a selectivity of 68% for C2+ products with a total current density of 268 mA cm-2 and faradaic efficiency of 37% for electrochemcial reduction of CO2 in 1 M aqueous KOH electrolyte at -2.27 V vs. RHE (reversible hydrogen electrode). In situ electron paramagnetic resonance spectroscopy reveals the presence of carbon-centred radicals as key reaction intermediates. This study demonstrates the positive impact of additional electron acceptors on the structural evolution of Cu(ii)-based porous materials to promote the electroreduction of CO2 to C2+ products.
RESUMEN
The exploitation of cathode materials with high capacity as well as high operating voltage is extremely important for the development of aqueous zinc-ion batteries (ZIBs). Yet, the classical high-capacity materials (e.g., vanadium-based materials) provide a low discharge voltage, while organic cathodes with high operating voltage generally suffer from a low capacity. In this work, organic (ethylenediamine)-inorganic (vanadium oxide) hybrid cathodes, that is, EDA-VO, with a dual energy-storage mechanism, are designed for ultrahigh-rate and ultralong-life ZIBs. The embedded ethylenediamine (EDA) can not only increase the layer spacing of the vanadium oxide, with improved mobility of Zn ions in the V-O layered structure, but also act as a bidentate chelating ligand participating in the storage of Zn ions. This hybrid provides a high specific capacity (382.6 mA h g-1 at 0.5 A g-1 ), elevated voltage (0.82 V) and excellent long-term cycle stability (over 10 000 cycles at 5 A g-1 ). Assistant density functional theory (DFT) calculations indicate the cathode has remarkable electronic conductivity, with an ultralow diffusion barrier of 0.78 eV for an optimal Zn-ion diffusion path in the EDA-VO. This interesting idea of building organic-inorganic hybrid cathode materials with a dual energy-storage mechanism opens a new research direction toward high-energy secondary batteries.
RESUMEN
Rechargeable aqueous Zn/manganese dioxide (Zn/MnO2) batteries are attractive energy storage technology owing to their merits of low cost, high safety, and environmental friendliness. However, the ß-MnO2 cathode is still plagued by the sluggish ion insertion kinetics due to the relatively narrow tunneled pathway. Furthermore, the energy storage mechanism is under debate as well. Here, ß-MnO2 cathode with enhanced ion insertion kinetics is introduced by the efficient oxygen defect engineering strategy. Density functional theory computations show that the ß-MnO2 host structure is more likely for H+ insertion rather than Zn2+, and the introduction of oxygen defects will facilitate the insertion of H+ into ß-MnO2. This theoretical conjecture is confirmed by the capacity of 302 mA h g-1 and capacity retention of 94% after 300 cycles in the assembled aqueous Zn/ß-MnO2 cell. These results highlight the potentials of defect engineering as a strategy of improving the electrochemical performance of ß-MnO2 in aqueous rechargeable batteries.
RESUMEN
Rechargeable aqueous zinc ion batteries (ZIBs) are highly desirable for large-scale energy storage due to their advantages of safety and low-cost. Development of advanced cathodes for use in aqueous ZIBs is urgently needed. Herein, we report a low-cost rechargeable aqueous Zn-V2O5 cell with 3 M ZnSO4 electrolyte that demonstrates high zinc storage capability. We also investigated the effect of different types/concentrations of the aqueous electrolytes on the performance of the Zn-V2O5 cells.