Mathematical modelling of the influence of ACE I/D polymorphism on blood pressure and antihypertensive therapy.

The angiotensin-converting enzyme (ACE) gene (ACE) insertion/deletion (I/D) polymorphism raises the possibility of personalising ACE inhibitor therapy to optimise its efficiency and reduce side effects in genetically distinct subgroups. However, the extent of its influence among these subgroups is unknown. Therefore, we extended our computational model of blood pressure regulation to investigate the effect of the ACE I/D polymorphism on haemodynamic parameters in humans undergoing antihypertensive therapy. The model showed that the dependence of blood pressure on serum ACE activity is a function of saturation and therefore, the lack of association between ACE I/D and blood pressure levels may be due to high ACE activity in specific populations. Additionally, in an extended model simulating the effects of different classes of antihypertensive drugs, we explored the relationship between ACE I/D and the efficacy of inhibitors of the renin-angiotensin-aldosterone system. The model predicted that the response of cardiovascular and renal parameters to treatment directly depends on ACE activity. However, significant differences in parameter changes were observed only between groups with high and low ACE levels, while different ACE I/D genotypes within the same group had similar changes in absolute values. We conclude that a single genetic variant is responsible for only a small fraction of heredity in treatment success and its predictive value is limited.

Physiologically Based Pharmacokinetic Modeling of Nanoparticle Biodistribution: A Review of Existing Models, Simulation Software, and Data Analysis Tools.

Cancer treatment and pharmaceutical development require targeted treatment and less toxic therapeutic intervention to achieve real progress against this disease. In this scenario, nanomedicine emerged as a reliable tool to improve drug pharmacokinetics and to translate to the clinical biologics based on large molecules. However, the ability of our body to recognize foreign objects together with carrier transport heterogeneity derived from the combination of particle physical and chemical properties, payload and surface modification, make the designing of effective carriers very difficult. In this scenario, physiologically based pharmacokinetic modeling can help to design the particles and eventually predict their ability to reach the target and treat the tumor. This effort is performed by scientists with specific expertise and skills and familiarity with artificial intelligence tools such as advanced software that are not usually in the "cords" of traditional medical or material researchers. The goal of this review was to highlight the advantages that computational modeling could provide to nanomedicine and bring together scientists with different background by portraying in the most simple way the work of computational developers through the description of the tools that they use to predict nanoparticle transport and tumor targeting in our body.

BioUML-towards a universal research platform.

BioUML (https://www.biouml.org)-is a web-based integrated platform for systems biology and data analysis. It supports visual modelling and construction of hierarchical biological models that allow us to construct the most complex modular models of blood pressure regulation, skeletal muscle metabolism, COVID-19 epidemiology. BioUML has been integrated with git repositories where users can store their models and other data. We have also expanded the capabilities of BioUML for data analysis and visualization of biomedical data: (i) any programs and Jupyter kernels can be plugged into the BioUML platform using Docker technology; (ii) BioUML is integrated with the Galaxy and Galaxy Tool Shed; (iii) BioUML provides two-way integration with R and Python (Jupyter notebooks): scripts can be executed on the BioUML web pages, and BioUML functions can be called from scripts; (iv) using plug-in architecture, specialized viewers and editors can be added. For example, powerful genome browsers as well as viewers for molecular 3D structure are integrated in this way; (v) BioUML supports data analyses using workflows (own format, Galaxy, CWL, BPMN, nextFlow). Using these capabilities, we have initiated a new branch of the BioUML development-u-science-a universal scientific platform that can be configured for specific research requirements.

Mathematical modeling of antihypertensive therapy.

Hypertension is a multifactorial disease arising from complex pathophysiological pathways. Individual characteristics of patients result in different responses to various classes of antihypertensive medications. Therefore, evaluating the efficacy of therapy based on in silico predictions is an important task. This study is a continuation of research on the modular agent-based model of the cardiovascular and renal systems (presented in the previously published article). In the current work, we included in the model equations simulating the response to antihypertensive therapies with different mechanisms of action. For this, we used the pharmacodynamic effects of the angiotensin II receptor blocker losartan, the calcium channel blocker amlodipine, the angiotensin-converting enzyme inhibitor enalapril, the direct renin inhibitor aliskiren, the thiazide diuretic hydrochlorothiazide, and the ß-blocker bisoprolol. We fitted therapy parameters based on known clinical trials for all considered medications, and then tested the model's ability to show reasonable dynamics (expected by clinical observations) after treatment with individual drugs and their dual combinations in a group of virtual patients with hypertension. The extended model paves the way for the next step in personalized medicine that is adapting the model parameters to a real patient and predicting his response to antihypertensive therapy. The model is implemented in the BioUML software and is available at https://gitlab.sirius-web.org/virtual-patient/antihypertensive-treatment-modeling.

Thoroughly Calibrated Modular Agent-Based Model of the Human Cardiovascular and Renal Systems for Blood Pressure Regulation in Health and Disease.

Here we present a modular agent-based mathematical model of the human cardiovascular and renal systems. It integrates the previous models primarily developed by A. C. Guyton, F. Karaaslan, K. M. Hallow, and Y. V. Solodyannikov. We performed the model calibration to find an equilibrium state within the normal vital sign ranges for a healthy adult. We verified the model's abilities to reproduce equilibrium states with abnormal physiological values related to different combinations of cardiovascular diseases (such as systemic hypertension, chronic heart failure, pulmonary hypertension, etc.). For the model creation and validation, we involved over 200 scientific studies covering known models of the human cardiovascular and renal functions, biosimulation platforms, and clinical measurements of physiological quantities in normal and pathological conditions. We compiled detailed documentation describing all equations, parameters and variables of the model with justification of all formulas and values. The model is implemented in BioUML and available in the web-version of the software.

A Modular Mathematical Model of Exercise-Induced Changes in Metabolism, Signaling, and Gene Expression in Human Skeletal Muscle.

Skeletal muscle is the principal contributor to exercise-induced changes in human metabolism. Strikingly, although it has been demonstrated that a lot of metabolites accumulating in blood and human skeletal muscle during an exercise activate different signaling pathways and induce the expression of many genes in working muscle fibres, the systematic understanding of signaling-metabolic pathway interrelations with downstream genetic regulation in the skeletal muscle is still elusive. Herein, a physiologically based computational model of skeletal muscle comprising energy metabolism, Ca2+, and AMPK (AMP-dependent protein kinase) signaling pathways and the expression regulation of genes with early and delayed responses was developed based on a modular modeling approach and included 171 differential equations and more than 640 parameters. The integrated modular model validated on diverse including original experimental data and different exercise modes provides a comprehensive in silico platform in order to decipher and track cause-effect relationships between metabolic, signaling, and gene expression levels in skeletal muscle.

GTRD: an integrated view of transcription regulation.

The Gene Transcription Regulation Database (GTRD; http://gtrd.biouml.org/) contains uniformly annotated and processed NGS data related to gene transcription regulation: ChIP-seq, ChIP-exo, DNase-seq, MNase-seq, ATAC-seq and RNA-seq. With the latest release, the database has reached a new level of data integration. All cell types (cell lines and tissues) presented in the GTRD were arranged into a dictionary and linked with different ontologies (BRENDA, Cell Ontology, Uberon, Cellosaurus and Experimental Factor Ontology) and with related experiments in specialized databases on transcription regulation (FANTOM5, ENCODE and GTEx). The updated version of the GTRD provides an integrated view of transcription regulation through a dedicated web interface with advanced browsing and search capabilities, an integrated genome browser, and table reports by cell types, transcription factors, and genes of interest.

Assessment of transcriptional importance of cell line-specific features based on GTRD and FANTOM5 data.

Creating a complete picture of the regulation of transcription seems to be an urgent task of modern biology. Regulation of transcription is a complex process carried out by transcription factors (TFs) and auxiliary proteins. Over the past decade, ChIP-Seq has become the most common experimental technology studying genome-wide interactions between TFs and DNA. We assessed the transcriptional significance of cell line-specific features using regression analysis of ChIP-Seq datasets from the GTRD database and transcriptional start site (TSS) activities from the FANTOM5 expression atlas. For this purpose, we initially generated a large number of features that were defined as the presence or absence of TFs in different promoter regions around TSSs. Using feature selection and regression analysis, we identified sets of the most important TFs that affect expression activity of TSSs in human cell lines such as HepG2, K562 and HEK293. We demonstrated that some TFs can be classified as repressors and activators depending on their location relative to TSS.

Population size estimation for quality control of ChIP-Seq datasets.

Chromatin immunoprecipitation followed by sequencing, i.e. ChIP-Seq, is a widely used experimental technology for the identification of functional protein-DNA interactions. Nowadays, such databases as ENCODE, GTRD, ChIP-Atlas and ReMap systematically collect and annotate a large number of ChIP-Seq datasets. Comprehensive control of dataset quality is currently indispensable to select the most reliable data for further analysis. In addition to existing quality control metrics, we have developed two novel metrics that allow to control false positives and false negatives in ChIP-Seq datasets. For this purpose, we have adapted well-known population size estimate for determination of unknown number of genuine transcription factor binding regions. Determination of the proposed metrics was based on overlapping distinct binding sites derived from processing one ChIP-Seq experiment by different peak callers. Moreover, the metrics also can be useful for assessing quality of datasets obtained from processing distinct ChIP-Seq experiments by a given peak caller. We also have shown that these metrics appear to be useful not only for dataset selection but also for comparison of peak callers and identification of site motifs based on ChIP-Seq datasets. The developed algorithm for determination of the false positive control metric and false negative control metric for ChIP-Seq datasets was implemented as a plugin for a BioUML platform: https://ict.biouml.org/bioumlweb/chipseq_analysis.html.

BioUML: an integrated environment for systems biology and collaborative analysis of biomedical data.

BioUML (homepage: http://www.biouml.org, main public server: https://ict.biouml.org) is a web-based integrated environment (platform) for systems biology and the analysis of biomedical data generated by omics technologies. The BioUML vision is to provide a computational platform to build virtual cell, virtual physiological human and virtual patient. BioUML spans a comprehensive range of capabilities, including access to biological databases, powerful tools for systems biology (visual modelling, simulation, parameters fitting and analyses), a genome browser, scripting (R, JavaScript) and a workflow engine. Due to integration with the Galaxy platform and R/Bioconductor, BioUML provides powerful possibilities for the analyses of omics data. The plug-in-based architecture allows the user to add new functionalities using plug-ins. To facilitate a user focus on a particular task or database, we have developed several predefined perspectives that display only those web interface elements that are needed for a specific task. To support collaborative work on scientific projects, there is a central authentication and authorization system (https://bio-store.org). The diagram editor enables several remote users to simultaneously edit diagrams.

GTRD: a database on gene transcription regulation-2019 update.

The current version of the Gene Transcription Regulation Database (GTRD; http://gtrd.biouml.org) contains information about: (i) transcription factor binding sites (TFBSs) and transcription coactivators identified by ChIP-seq experiments for Homo sapiens, Mus musculus, Rattus norvegicus, Danio rerio, Caenorhabditis elegans, Drosophila melanogaster, Saccharomyces cerevisiae, Schizosaccharomyces pombe and Arabidopsis thaliana; (ii) regions of open chromatin and TFBSs (DNase footprints) identified by DNase-seq; (iii) unmappable regions where TFBSs cannot be identified due to repeats; (iv) potential TFBSs for both human and mouse using position weight matrices from the HOCOMOCO database. Raw ChIP-seq and DNase-seq data were obtained from ENCODE and SRA, and uniformly processed. ChIP-seq peaks were called using four different methods: MACS, SISSRs, GEM and PICS. Moreover, peaks for the same factor and peak calling method, albeit using different experiment conditions (cell line, treatment, etc.), were merged into clusters. To reduce noise, such clusters for different peak calling methods were merged into meta-clusters; these were considered to be non-redundant TFBS sets. Moreover, extended quality control was applied to all ChIP-seq data. Web interface to access GTRD was developed using the BioUML platform. It provides browsing and displaying information, advanced search possibilities and an integrated genome browser.

Genome-wide map of human and mouse transcription factor binding sites aggregated from ChIP-Seq data.

OBJECTIVES: Mammalian genomics studies, especially those focusing on transcriptional regulation, require information on genomic locations of regulatory regions, particularly, transcription factor (TF) binding sites. There are plenty of published ChIP-Seq data on in vivo binding of transcription factors in different cell types and conditions. However, handling of thousands of separate data sets is often impractical and it is desirable to have a single global map of genomic regions potentially bound by a particular TF in any of studied cell types and conditions. DATA DESCRIPTION: Here we report human and mouse cistromes, the maps of genomic regions that are routinely identified as TF binding sites, organized by TF. We provide cistromes for 349 mouse and 599 human TFs. Given a TF, its cistrome regions are supported by evidence from several ChIP-Seq experiments or several computational tools, and, as an optional filter, contain occurrences of sequence motifs recognized by the TF. Using the cistrome, we provide an annotation of TF binding sites in the vicinity of human and mouse transcription start sites. This information is useful for selecting potential gene targets of transcription factors and detecting co-regulated genes in differential gene expression data.

Comparative analysis of protein-coding and long non-coding transcripts based on RNA sequence features.

RNA plays an important role in the intracellular cell life and in the organism in general. Besides the well-established protein coding RNAs (messenger RNAs, mRNAs), long non-coding RNAs (lncRNAs) have gained the attention of recent researchers. Although lncRNAs have been classified as non-coding, some authors reported the presence of corresponding sequences in ribosome profiling data (Ribo-seq). Ribo-seq technology is a powerful experimental tool utilized to characterize RNA translation in cell with focus on initiation (harringtonine, lactimidomycin) and elongation (cycloheximide). By exploiting translation starts obtained from the Ribo-seq experiment, we developed a novel position weight matrix model for the prediction of translation starts. This model allowed us to achieve 96% accuracy of discrimination between human mRNAs and lncRNAs. When the same model was used for the prediction of putative ORFs in RNAs, we discovered that the majority of lncRNAs contained only small ORFs ([Formula: see text][Formula: see text]nt) in contrast to mRNAs.

Computational master-regulator search reveals mTOR and PI3K pathways responsible for low sensitivity of NCI-H292 and A427 lung cancer cell lines to cytotoxic action of p53 activator Nutlin-3.

BACKGROUND: Small molecule Nutlin-3 reactivates p53 in cancer cells by interacting with the complex between p53 and its repressor Mdm-2 and causing an increase in cancer cell apoptosis. Therefore, Nutlin-3 has potent anticancer properties. Clinical and experimental studies of Nutlin-3 showed that some cancer cells may lose sensitivity to this compound. Here we analyze possible mechanisms for insensitivity of cancer cells to Nutlin-3. METHODS: We applied upstream analysis approach implemented in geneXplain platform ( genexplain.com ) using TRANSFAC® database of transcription factors and their binding sites in genome and using TRANSPATH® database of signal transduction network with associated software such as Match™ and Composite Module Analyst (CMA). RESULTS: Using genome-wide gene expression profiling we compared several lung cancer cell lines and showed that expression programs executed in Nutlin-3 insensitive cell lines significantly differ from that of Nutlin-3 sensitive cell lines. Using artificial intelligence approach embed in CMA software, we identified a set of transcription factors cooperatively binding to the promoters of genes up-regulated in the Nutlin-3 insensitive cell lines. Graph analysis of signal transduction network upstream of these transcription factors allowed us to identify potential master-regulators responsible for maintaining such low sensitivity to Nutlin-3 with the most promising candidate mTOR, which acts in the context of activated PI3K pathway. These finding were validated experimentally using an array of chemical inhibitors. CONCLUSIONS: We showed that the Nutlin-3 insensitive cell lines are actually highly sensitive to the dual PI3K/mTOR inhibitor NVP-BEZ235, while no responding to either PI3K -specific LY294002 nor Bcl-XL specific 2,3-DCPE compounds.

HOCOMOCO: towards a complete collection of transcription factor binding models for human and mouse via large-scale ChIP-Seq analysis.

We present a major update of the HOCOMOCO collection that consists of patterns describing DNA binding specificities for human and mouse transcription factors. In this release, we profited from a nearly doubled volume of published in vivo experiments on transcription factor (TF) binding to expand the repertoire of binding models, replace low-quality models previously based on in vitro data only and cover more than a hundred TFs with previously unknown binding specificities. This was achieved by systematic motif discovery from more than five thousand ChIP-Seq experiments uniformly processed within the BioUML framework with several ChIP-Seq peak calling tools and aggregated in the GTRD database. HOCOMOCO v11 contains binding models for 453 mouse and 680 human transcription factors and includes 1302 mononucleotide and 576 dinucleotide position weight matrices, which describe primary binding preferences of each transcription factor and reliable alternative binding specificities. An interactive interface and bulk downloads are available on the web: http://hocomoco.autosome.ru and http://www.cbrc.kaust.edu.sa/hocomoco11. In this release, we complement HOCOMOCO by MoLoTool (Motif Location Toolbox, http://molotool.autosome.ru) that applies HOCOMOCO models for visualization of binding sites in short DNA sequences.

GTRD: a database of transcription factor binding sites identified by ChIP-seq experiments.

GTRD-Gene Transcription Regulation Database (http://gtrd.biouml.org)-is a database of transcription factor binding sites (TFBSs) identified by ChIP-seq experiments for human and mouse. Raw ChIP-seq data were obtained from ENCODE and SRA and uniformly processed: (i) reads were aligned using Bowtie2; (ii) ChIP-seq peaks were called using peak callers MACS, SISSRs, GEM and PICS; (iii) peaks for the same factor and peak callers, but different experiment conditions (cell line, treatment, etc.), were merged into clusters; (iv) such clusters for different peak callers were merged into metaclusters that were considered as non-redundant sets of TFBSs. In addition to information on location in genome, the sets contain structured information about cell lines and experimental conditions extracted from descriptions of corresponding ChIP-seq experiments. A web interface to access GTRD was developed using the BioUML platform. It provides: (i) browsing and displaying information; (ii) advanced search possibilities, e.g. search of TFBSs near the specified gene or search of all genes potentially regulated by a specified transcription factor; (iii) integrated genome browser that provides visualization of the GTRD data: read alignments, peaks, clusters, metaclusters and information about gene structures from the Ensembl database and binding sites predicted using position weight matrices from the HOCOMOCO database.

Assessment of translational importance of mammalian mRNA sequence features based on Ribo-Seq and mRNA-Seq data.

Ribosome profiling technology (Ribo-Seq) allowed to highlight more details of mRNA translation in cell and get additional information on importance of mRNA sequence features for this process. Application of translation inhibitors like harringtonine and cycloheximide along with mRNA-Seq technique helped to assess such important characteristic as translation efficiency. We assessed the translational importance of features of mRNA sequences with the help of statistical analysis of Ribo-Seq and mRNA-Seq data. Translationally important features known from literature as well as proposed by the authors were used in analysis. Such comparisons as protein coding versus non-coding RNAs and high- versus low-translated mRNAs were performed. We revealed a set of features that allowed to discriminate the compared categories of RNA. Significant relationships between mRNA features and efficiency of translation were also established.

Transcriptome Characteristics and X-Chromosome Inactivation Status in Cultured Rat Pluripotent Stem Cells.

Rat pluripotent stem cells, embryonic stem cells (ESCs), and induced pluripotent stem cells (iPSCs) as mouse and human ones have a great potential for studying mammalian early development, disease modeling, and evaluation of regenerative medicine approaches. However, data on pluripotency realization and self-renewal maintenance in rat cells are still very limited, and differentiation protocols of rat ESCs (rESCs) and iPSCs to study development and obtain specific cell types for biomedical applications are poorly developed. In this study, the RNA-Seq technique was first used for detailed transcriptome characterization in rat pluripotent cells. The rESC and iPSC transcriptomes demonstrated a high similarity and were significantly different from those in differentiated cells. Additionally, we have shown that reprogramming of rat somatic cells to a pluripotent state was accompanied by X-chromosome reactivation. There were two active X chromosomes in XX rESCs and iPSCs, which is one of the key attributes of the pluripotent state. Differentiation of both rESCs and iPSCs led to X-chromosome inactivation (XCI). The dynamics of XCI in differentiating rat cells was very similar to that in mice. Two types of facultative heterochromatin described in various mammalian species were revealed on the rat inactive X chromosome. To explore XCI dynamics, we established a new monolayer differentiation protocol for rESCs and iPSCs that may be applied to study different biological processes and optimized for directed derivation of specific cell types.

Model composition through model reduction: a combined model of CD95 and NF-κB signaling pathways.

BACKGROUND: Many mathematical models characterizing mechanisms of cell fate decisions have been constructed recently. Their further study may be impossible without development of methods of model composition, which is complicated by the fact that several models describing the same processes could use different reaction chains or incomparable sets of parameters. Detailed models not supported by sufficient volume of experimental data suffer from non-unique choice of parameter values, non-reproducible results, and difficulty of analysis. Thus, it is necessary to reduce existing models to identify key elements determining their dynamics, and it is also required to design the methods allowing us to combine them. RESULTS: Here we propose a new approach to model composition, based on reducing several models to the same level of complexity and subsequent combining them together. Firstly, we suggest a set of model reduction tools that can be systematically applied to a given model. Secondly, we suggest a notion of a minimal complexity model. This model is the simplest one that can be obtained from the original model using these tools and still able to approximate experimental data. Thirdly, we propose a strategy for composing the reduced models together. Connection with the detailed model is preserved, which can be advantageous in some applications. A toolbox for model reduction and composition has been implemented as part of the BioUML software and tested on the example of integrating two previously published models of the CD95 (APO-1/Fas) signaling pathways. We show that the reduced models lead to the same dynamical behavior of observable species and the same predictions as in the precursor models. The composite model is able to recapitulate several experimental datasets which were used by the authors of the original models to calibrate them separately, but also has new dynamical properties. CONCLUSION: Model complexity should be comparable to the complexity of the data used to train the model. Systematic application of model reduction methods allows implementing this modeling principle and finding models of minimal complexity compatible with the data. Combining such models is much easier than of precursor models and leads to new model properties and predictions.

Identification of differentially expressed genes by meta-analysis of microarray data on breast cancer.

Albeit the great number of microarray data available on breast cancer, reliable identification of genes associated with breast cancer development remains a challenge. The aim of this work was to develop a novel method of meta-analysis for the identification of differentially expressed genes integrating results of several independent microarray experiments. We developed a statistical method for identification of up- and down-regulated genes to perform meta-analysis. The method takes advantage of hypergeometric and binomial distributions. Using our method we performed meta-analysis of five data sets from independent cDNA-microarray experiments on breast cancer. The meta-analysis revealed that 3.2% and 2.8% of the 24,726 analyzed genes are significantly (P-value < 0.01) down- and up-regulated, respectively. We also show that properly applied meta-analysis is a good tool for comparison of different breast cancer subtypes. Our meta-analysis showed that the expression of the majority of genes does not show significant differences in different subtypes of breast cancer. Here, we report the rationale, development and application of meta-analysis that enable us to identify biologically meaningful features of breast cancer. The algorithm we propose for the meta-analysis can reveal the features specific to the breast cancer subtypes and those common to breast cancer. The results allow us to revise the previously generated lists of genes associated with breast cancer and also identify most promising anticancer drug-target genes.