Surface Area-Enhanced Cerium and Sulfur-Modified Hierarchical Bismuth Oxide Nanosheets for Electrochemical Carbon Dioxide Reduction to Formate.

Electrochemical carbon dioxide reduction reaction (ECO2RR) is a promising approach to synthesize fuels and value-added chemical feedstocks while reducing atmospheric CO2 levels. Here, high surface area cerium and sulfur-doped hierarchical bismuth oxide nanosheets (Ce@S-Bi2O3) are develpoed by a solvothermal method. The resulting Ce@S-Bi2O3 electrocatalyst shows a maximum formate Faradaic efficiency (FE) of 92.5% and a current density of 42.09 mA cm-2 at -1.16 V versus RHE using a traditional H-cell system. Furthermore, using a three-chamber gas diffusion electrode (GDE) reactor, a maximum formate FE of 85% is achieved in a wide range of applied potentials (-0.86 to -1.36 V vs RHE) using Ce@S-Bi2O3. The density functional theory (DFT) results show that doping of Ce and S in Bi2O3 enhances formate production by weakening the OH* and H* species. Moreover, DFT calculations reveal that *OCHO is a dominant pathway on Ce@S-Bi2O3 that leads to efficient formate production. This study opens up new avenues for designing metal and element-doped electrocatalysts to improve the catalytic activity and selectivity for ECO2RR.

Unveiling Local Aging Patterns Following Accelerated Stress Testing of High-Performance Polymer Electrolyte Fuel Cells.

This study presents an in-depth analysis of heterogeneous aging patterns in membrane electrode assemblies (MEAs) subjected to diverse accelerated stress test (AST) conditions, simulating carbon corrosion (CC AST) and Pt particle size growth in fully humidified (Pt AST-Wet) and underhumidified (Pt AST-Dry) H2/N2 atmospheres. Multimodal characterization techniques are used to focus on heterogeneous aging patterns, primarily examining the variations in current distributions and Pt particle size maps. The findings reveal distinct characteristics of current distributions for all the AST cases, with substantial changes and strong current gradients in the CC AST case, indicative of severe performance degradation. Notably, despite significant differences in Pt particle size growth at the end-of-life (EOL), the Pt AST-Wet and Pt AST-Dry cases show minor changes in spatial current distributions. Moreover, a preferential growth of Pt particles under serpentine flow field bends in the Pt AST-Wet case is observed for the first time. This study provides crucial insights into the role of mass transport properties in shaping fuel cell performance, and highlights the need to consider factors beyond electrochemically-active surface area (ECSA) when assessing fuel cell durability.

Improving the Through-Thickness Thermal Conductivity of Carbon Fiber/Epoxy Laminates by Direct Growth of SiC/Graphene Heterostructures on Carbon Fibers.

Poor thermal conductivity in the through-thickness direction is a critical limitation in the performance of carbon fiber-reinforced polymer (CFRP) composites over a broad range of applications in the aviation industry, where heat dissipation is required (e.g., battery packs, electronic housing, and heat spreaders). In this work, it is demonstrated for the first time that a hierarchical network of vertically oriented graphene nanoflakes (GNFs), with nanoconfined silicon carbide (SiC) nanocrystals, self-assembled on carbon fibers (CFs) can provide significant improvement to the thermal conductivity (TC) of CFRPs in the through-thickness direction. The vertically aligned SiC/GNF heterostructures were grown directly on CFs for the first time by single-step plasma-enhanced chemical vapor deposition (PECVD) employing tetramethylsilane (TMS) and methane (CH4) gases at temperatures of 800 and 950 °C. At the deposition temperature of 950 °C, the controlled introduction of SiC/GNF heterostructures induced a 56% improvement in through-thickness TC over the bare CFRP counterparts while simultaneously preserving the tensile strength. The increase in thermal conductivity is accomplished by SiC nanocrystals, which serve as linkage thermal conducting paths between the vertical graphene layers, further enhancing the smooth transmission of phonons in the vertical direction. The work demonstrates for the first time the unique potential of novel SiC/GNF heterostructures for attaining strong and thermally conductive multifunctional CFRPs.

Pulsed Electrolysis with a Nickel Molecular Catalyst Improves Selectivity for Carbon Dioxide Reduction.

Pulsed electrolysis can significantly improve carbon dioxide reduction on metal electrodes, but the effect of short (millisecond to seconds) voltage steps on molecular electrocatalysts is largely unstudied. In this work, we investigate the effect pulse electrolysis has on the selectivity and stability of the homogeneous electrocatalyst [Ni(cyclam)]2+ at a carbon electrode. By tuning the potential and pulse duration, we achieve a significant improvement in CO Faradaic efficiencies (85%) after 3 h, double that of the system under potentiostatic conditions. The improved activity is due to in situ catalyst regeneration from an intermediate that occurs as part of the catalyst's degradation pathway. This study demonstrates the wider opportunity to apply pulsed electrolysis to molecular electrocatalysts to control activity and improve selectivity.

Employing conductive carrier for establishing spontaneous microbial galvanic cell and accelerating denitrification.

It is well-known that metal corrosion is accelerated by formation of galvanic cell. In this study, we reported the acceleration of denitrification by using conductive carrier through formation of microbial galvanic cell (MGC). Electrically conductive graphite plate (GP) was used as biofilm carrier and compared with the non-conductive polypropylene (PP) plate carrier. Cyclic voltametric analyses showed that biofilms with bidirectional electron transfer functions of bioelectrochemical denitrification (BEDN) and acetate oxidation could be enriched spontaneously onto the GP carrier, hinting the establishment of MGC. Further analysis using differential pulse voltammetry revealed that the redox mediator related to extracellular electron transfer was detected in both media of the GP and PP carrier. Microbial community analysis showed that the biofilms in both GP and PP carrier had identical microbial composition but varied in abundance. The genus of Comamonas, Pseudomonas, Paracoccus and Thauera were the dominance of electroactive denitrifiers responsible for BEDN in both the GP and PP carrier. The GP carrier had a 75.9% higher abundant enrichment of electroactive denitrifiers than the PP carrier. Denitrification performance analyses showed that the GP carrier had a denitrification rate constant (kDN) of 1.25 and 2.66 h-1 at 15 °C and 30 °C, respectively, which was nearly 76.1% and 92.7% higher than the non-conductive PP carrier with corresponding values of about 0.71 and 1.38 h-1. Further, the result of conductive carrier accelerating denitrification was confirmed in scaled-up denitrification bioreactors with volume of 104 L using brush-like biofilm carriers. The acceleration of denitrification was attributed to the spontaneously established MGC, which promoted the direct and mediated electron transfer of the electroactive denitrifiers grown onto the conductive carriers and speeded up the BEDN. The result of this study demonstrated that the BEDN could be integrated to traditional biological denitrification system to accelerate denitrification in the form of MGC by simply employment of conductive carrier.

Elucidating Sensitivity and Stability Relationship of Gold-Carbon Hybrid LSPR Sensors Using Principal Component Analysis.

Sensitive localized surface plasmon resonance (LSPR) sensing is achieved using nanostructured geometries of noble metals which typically have dimensions less than 100 nm. Among the plethora of geometries and materials, the spherical geometries of gold (Au) are widely used to develop sensitive bio/chemical sensors due to ease of manufacturing and biofunctionlization. One major limitation of spherical-shaped geometries of Au, used for LSPR sensing, is their low refractive index (RI) sensitivity which is commonly addressed by adding another material to the Au nanostructures. However, the process of addition of new material on Au nanostructures, while retaining the LSPR of Au, often comes with a trade-off which is associated with the instability of the developed composite, especially in harsh chemical environments. Addressing this challenge, we develop a Au-graphene-layered hybrid (Au-G) with high stability (studied up to 2 weeks here) and enhanced RI sensitivity (a maximum of 180.1 nm/RIU) for generic LSPR sensing applications using spherical Au nanostructures in harsh chemical environments, involving organic solvents. Additionally, by virtue of principal component analysis, we correlate stability and sensitivity of the developed system. The relationship suggests that the shelf life of the material is proportional to its sensitivity, while the stability of the sensor during the measurement in liquid environment decreases when the sensitivity of the material is increased. Though we uncover this relationship for the LSPR sensor, it remains evasive to explore similar relationships within other optical and electrochemical transduction techniques. Therefore, our work serves as a benchmark report in understanding/establishing new correlations between sensing parameters.

Nanoplasmonic biosensor for rapid detection of multiple viral variants in human serum.

As viruses constantly change due to mutation, variants are expected to emerge demanding development of sensors capable of detecting multiple variants using one single sensor platform. Herein, we report the integration of a synthetic binder against SARS-CoV-2 with a nanoplasmonic-based sensing technology, which enables the successful detection of spike proteins of Alpha, Beta and Gamma variants of SARS CoV-2. The recognition event is achieved by specific nanostructured molecularly imprinted polymers (nanoMIPs), developed against a region of the receptor binding domain (RBD) of the SARS CoV-2 spike protein. The transduction is based on the principle of localized surface plasmon resonance (LSPR) associated with silver nanostructures. The nanoMIPs-functionalised LSPR sensor allows for the detection of all 3 protein variants with a limit of detection of 9.71 fM, 7.32 fM and 8.81 pM using wavelength shifts respectively for Alpha, Beta and Gamma spike protein variants. This can be achieved within 30 min from the sample collection, both from blood and using nasal swab, thus making this sensor suitable for rapid detection of COVID-19. Additionally, the turnaround time for sensor development and validation can be completed in less than 8 weeks, making it suitable for addressing future pandemic needs without the requirement for biological binding agents, which is one of the bottlenecks to the supply chain in diagnostic devices.

Zero-Gap Bipolar Membrane Electrolyzer for Carbon Dioxide Reduction Using Acid-Tolerant Molecular Electrocatalysts.

The scaling-up of electrochemical CO2 reduction requires circumventing the CO2 loss as carbonates under alkaline conditions. Zero-gap cell configurations with a reverse-bias bipolar membrane (BPM) represent a possible solution, but the catalyst layer in direct contact with the acidic environment of a BPM usually leads to H2 evolution dominating. Here we show that using acid-tolerant Ni molecular electrocatalysts selective (>60%) CO2 reduction can be achieved in a zero-gap BPM device using a pure water and CO2 feed. At a higher current density (100 mA cm-2), CO selectivity decreases, but was still >30%, due to reversible product inhibition. This study demonstrates the importance of developing acid-tolerant catalysts for use in large-scale CO2 reduction devices.

Direct monitoring of single-cell response to biomaterials by Raman spectroscopy.

There is continued focus on the development of new biomaterials and associated biological testing methods needed to reduce the time taken for their entry to clinical use. The application of Raman spectroscopy to the study of individual cells that have been in contact with biomaterials offers enhanced in vitro information in a potentially non-destructive testing regime. The work presented here reports the Raman spectral analysis of discreet U-2 OS bone cells after exposure to hydroxyapatite (HA) coated titanium (Ti) substrates in both the as-deposited and thermally annealed states. These data show that cells that were in contact with the bioactive HA surface for 7 days had spectral markers similar to those cultured on the Ti substrate control for the same period. However, the spectral features for those cells that were in contact with the annealed HA surface had indicators of significant differentiation at day 21 while cells on the as-deposited surface did not show these Raman changes until day 28. The cells adhered to pristine Ti control surface showed no spectral changes at any of the timepoints studied. The validity of these spectroscopic results has been confirmed using data from standard in vitro cell viability, adhesion, and proliferation assays over the same 28-day culture period. In this case, cell maturation was evidenced by the formation of natural bone apatite, which precipitated intracellularly for cells exposed to both types of HA-coated Ti at 21 and 28 days, respectively. The properties of the intracellular apatite were markedly different from that of the synthetic HA used to coat the Ti substrate with an average particle size of 230 nm, a crystalline-like shape and Ca/P ratio of 1.63 ± 0.5 as determined by SEM-EDX analysis. By comparison, the synthetic HA particles used as a control had an average size of 372 nm and were more-rounded in shape with a Ca/P ratio of 0.8 by XPS analysis and 1.28 by SEM-EDX analysis. This study shows that Raman spectroscopy can be employed to monitor single U-2 OS cell response to biomaterials that promote cell maturation towards de novo bone thereby offering a label-free in vitro testing method that allows for non-destructive analyses.

Doping Independent Work Function and Stable Band Gap of Spinel Ferrites with Tunable Plasmonic and Magnetic Properties.

Tuning optical or magnetic properties of nanoparticles, by addition of impurities, for specific applications is usually achieved at the cost of band gap and work function reduction. Additionally, conventional strategies to develop nanoparticles with a large band gap also encounter problems of phase separation and poor crystallinity at high alloying degree. Addressing the aforementioned trade-offs, here we report Ni-Zn nanoferrites with energy band gap (Eg) of ≈3.20 eV and a work function of ≈5.88 eV. While changes in the magnetoplasmonic properties of the Ni-Zn ferrite were successfully achieved with the incorporation of bismuth ions at different concentrations, there was no alteration of the band gap and work function in the developed Ni-Zn ferrite. This suggests that with the addition of minute impurities to ferrites, independent of their changes in the band gap and work function, one can tune their magnetic and optical properties, which is desired in a wide range of applications such as nanobiosensing, nanoparticle based catalysis, and renewable energy generation using nanotechnology.

The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites.

Polyetheretherketone (PEEK) is a high-performance thermoplastic polymer which has found increasing application in orthopaedics and has shown a lot of promise for 'made-to-measure' implants via additive manufacturing approaches. However, PEEK is bioinert and needs to undergo surface modification to make it at least osteoconductive to ensure a more rapid, improved, and stable fixation that will last longer in vivo. One approach to solving this issue is to modify PEEK with bioactive agents such as hydroxyapatite (HA). The work reported in this study demonstrates the direct 3D printing of PEEK/HA composites of up to 30 weight percent (wt%) HA using a Fused Filament Fabrication (FFF) approach. The surface characteristics and in vitro properties of the composite materials were investigated. X-ray diffraction revealed the samples to be semi-crystalline in nature, with X-ray Photoelectron Spectroscopy and Time-of-Flight Secondary Ion Mass Spectrometry revealing HA materials were available in the uppermost surface of all the 3D printed samples. In vitro testing of the samples at 7 days demonstrated that the PEEK/HA composite surfaces supported the adherence and growth of viable U-2 OS osteoblast like cells. These results demonstrate that FFF can deliver bioactive HA on the surface of PEEK bio-composites in a one-step 3D printing process.

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach.

The manufacture of polyetheretherketone/hydroxyapatite (PEEK/HA) composites is seen as a viable approach to help enhance direct bone apposition in orthopaedic implants. A range of methods have been used to produce composites, including Selective Laser Sintering and injection moulding. Such techniques have drawbacks and lack flexibility to manufacture complex, custom-designed implants. 3D printing gets around many of the restraints and provides new opportunities for innovative solutions that are structurally suited to meet the needs of the patient. This work reports the direct 3D printing of extruded PEEK/HA composite filaments via a Fused Filament Fabrication (FFF) approach. In this work samples are 3D printed by a custom modified commercial printer Ultimaker 2+ (UM2+). SEM-EDX and µCT analyses show that HA particles are evenly distributed throughout the bulk and across the surface of the native 3D printed samples, with XRD highlighting up to 50% crystallinity and crystalline domains clearly observed in SEM and HR-TEM analyses. This highlights the favourable temperature conditions during 3D printing. The yield stress and ultimate tensile strength obtained for all the samples are comparable to human femoral cortical bone. The results show how FFF 3D printing of PEEK/HA composites up to 30 wt% HA can be achieved.

Novel combination of non-invasive morphological and solid-state characterisation of drug-loaded core-shell electrospun fibres.

In recent years, core-shell nanofibrous drug delivery systems have received increasing attention due to their ability to incorporate two or more active pharmaceutical ingredients (APIs) individually into the desired layer (either core or sheath) and thereby finely tune the release profiles of even incompatible drugs in one system. This study aims to perform formulation and solid-state characterisation of levofloxacin-loaded polylactic acid (PLA) - naproxen-sodium-loaded polyvinyl pyrrolidone (PVP) bicomponent core-shell fibrous sheets and examine the electro spinnability of the precursor combinations. The selected drugs have potential therapeutic relevance in similar systems intended for wound healing; however, in this study, they are used as model drugs to understand the physicochemical properties of a drug loaded system. In order to determine the best core- and shell-solution combination, a full factorial experimental design is used. A combination of various morphological (scanning electron microscopy and transmission electron microscopy) and microstructural characterisation techniques (X-ray photoelectron spectroscopy and Raman spectroscopy) was applied to non-invasively obtain information about the structure of the fibres and the embedded drugs. The results indicate that core-shell fibres of different compositions could be successfully prepared with various structural homogeneities. The best core-shell structure was obtained using a combination of 15% (w/w) shell concentration and 8% (w/w) PLA solution concentration. In addition to the conventional core-shell structural verification methods, the Raman spectroscopy method was implemented to reveal not only the core-shell structure of the PLA/PVP nanofibers but also the form of the embedded drugs. The Raman mapping of the fibres confirm the above results, and it is shown that an amorphous solid dispersion is formed as a result of the coaxial electrospinning process.

Enhanced Photocatalytic Degradation of the Imidazolinone Herbicide Imazapyr upon UV/Vis Irradiation in the Presence of CaxMnOy-TiO2 Hetero-Nanostructures: Degradation Pathways and Reaction Intermediates.

The determination of reaction pathways and identification of products of pollutants degradation is central to photocatalytic environmental remediation. This work focuses on the photocatalytic degradation of the herbicide Imazapyr (2-(4-methyl-5-oxo-4-propan-2-yl-1H-imidazol-2-yl) pyridine-3-carboxylic acid) under UV-Vis and visible-only irradiation of aqueous suspensions of CaxMnOy-TiO2, and on the identification of the corresponding degradation pathways and reaction intermediates. CaxMnOy-TiO2 was formed by mixing CaxMnOy and TiO2 by mechanical grinding followed by annealing at 500 °C. A complete structural characterization of CaxMnOy-TiO2 was carried out. The photocatalytic activity of the hetero-nanostructures was determined using phenol and Imazapyr herbicide as model pollutants in a stirred tank reactor under UV-Vis and visible-only irradiation. Using equivalent loadings, CaxMnOy-TiO2 showed a higher rate (10.6 µM·h-1) as compared to unmodified TiO2 (7.4 µM·h-1) for Imazapyr degradation under UV-Vis irradiation. The mineralization rate was 4.07 µM·h-1 for CaxMnOy-TiO2 and 1.21 µM·h-1 for TiO2. In the CaxMnOy-TiO2 system, the concentration of intermediate products reached a maximum at 180 min of irradiation that then decreased to a half in 120 min. For unmodified TiO2, the intermediates continuously increased with irradiation time with no decrease observed in their concentration. The enhanced efficiency of the CaxMnOy-TiO2 for the complete degradation of the Imazapyr and intermediates is attributed to an increased adsorption of polar species on the surface of CaxMnOy. Based on LC-MS, photocatalytic degradation pathways for Imazapyr under UV-Vis irradiation have been proposed. Some photocatalytic degradation was obtained under visible-only irradiation for CaxMnOy-TiO2. Hydroxyl radicals were found to be main reactive oxygen species responsible for the photocatalytic degradation through radical scavenger investigations.

A review of heterogeneous photocatalysis for water and surface disinfection.

Photo-excitation of certain semiconductors can lead to the production of reactive oxygen species that can inactivate microorganisms. The mechanisms involved are reviewed, along with two important applications. The first is the use of photocatalysis to enhance the solar disinfection of water. It is estimated that 750 million people do not have accessed to an improved source for drinking and many more rely on sources that are not safe. If one can utilize photocatalysis to enhance the solar disinfection of water and provide an inexpensive, simple method of water disinfection, then it could help reduce the risk of waterborne disease. The second application is the use of photocatalytic coatings to combat healthcare associated infections. Two challenges are considered, i.e., the use of photocatalytic coatings to give "self-disinfecting" surfaces to reduce the risk of transmission of infection via environmental surfaces, and the use of photocatalytic coatings for the decontamination and disinfection of medical devices. In the final section, the development of novel photocatalytic materials for use in disinfection applications is reviewed, taking account of materials, developed for other photocatalytic applications, but which may be transferable for disinfection purposes.