RESUMEN
Two-dimensional (2D) transitional metal dichalcogenides (TMDs) have garnered significant attention due to their potential for next-generation electronics, which require device scaling. However, the performance of TMD-based field-effect transistors (FETs) is greatly limited by the contact resistance. This study develops an effective strategy to optimize the contact resistance of WSe2 FETs by combining contact doping and 2D metallic electrode materials. The contact regions were doped using a laser, and the metallic TaSe2 flakes were stacked on doped WSe2 as electrodes. Doping the contact areas decreases the depletion width, while introducing the TaSe2 contact results in a lower Schottky barrier. This method significantly improves the electrical performance of the WSe2 FETs. The doped WSe2/TaSe2 contact exhibits an ultralow Schottky barrier height of 65 meV and a contact resistance of 11 kΩ·µm, which is a 50-fold reduction compared to the conventional Cr/Au contact. Our method offers a way on fabricating high-performance 2D FETs.
RESUMEN
Interlayer excitons (ILEs) in the van der Waals (vdW) heterostructures of type-II band alignment transition metal dichalcogenides (TMDCs) have attracted significant interest owing to their unique exciton properties and potential in quantum information applications. However, the new dimension that emerges with the stacking of structures with a twist angle leads to a more complex fine structure of ILEs, presenting both an opportunity and a challenge for the regulation of the interlayer excitons. In this study, we report the evolution of interlayer excitons with the twist angle in the WSe2/WS2 heterostructure and identify the direct (indirect) interlayer excitons by combining photoluminescence (PL) and density functional theory (DFT) calculations. Two interlayer excitons with opposite circular polarization assigned to the different transition paths of K-K and Q-K were observed. The nature of the direct (indirect) interlayer exciton was confirmed by circular polarization PL measurement, excitation power-dependent PL measurement and DFT calculations. Furthermore, by applying an external electric field to regulate the band structure of the WSe2/WS2 heterostructure and control the transition path of the interlayer excitons, we could successfully realize the regulation of interlayer exciton emission. This study provides more evidence for the twist-angle-based control of heterostructure properties.
RESUMEN
Molecular ferroelectrics (MFs) have been proven to demonstrate excellent properties even comparable to those of inorganic counterparts usually with heavy metals. However, the validation of their device applications is still at the infant stage. The polycrystalline feature of conventionally obtained MF films, the patterning challenges for microelectronics and the brittleness of crystalline films significantly hinder their development for organic integrated circuits, as well as emerging flexible electronics. Here, a large-area flexible memory array is demonstrated of oriented molecular ferroelectric single crystals (MFSCs) with nearly saturated polarization. Highly-uniform MFSC arrays are prepared on large-scale substrates including Si wafers and flexible substrates using an asymmetric-wetting and microgroove-assisted coating (AWMAC) strategy. Resultant flexible memory arrays exhibit excellent nonvolatile memory properties with a low-operating voltage of <5 V, i.e., nearly saturated ferroelectric polarization (6.5 µC cm-2 ), and long bending endurance (>103 ) under various bending radii. These results may open an avenue for scalable flexible MF electronics with high performance.
RESUMEN
The emergence of near-eye displays, such as head-mounted displays, is triggering a requirement for highly enhanced display resolution. High-resolution micro-displays with micro-organic light-emitting diodes (micro-OLEDs) can be a preferential candidate, owing to the mature industrialization of OLEDs along with the advantages of flexibility, light weight, and ease of processing. However, micro-OLEDs with pixel sizes down to micrometers are difficult to be achieved using conventional techniques such as fine metal mask evaporation and lithography. Here, a solution-processing approach to pattern organic semiconductors (OSCs) for micro-OLED arrays with the assistance of templated dewetting is demonstrated. Solvents containing organic functional materials are dewetted on the surface with hydrophobic/hydrophilic patterns to form ordered droplet arrays using dip-coating. Subsequently, patterned OSC films are produced by effectively controlling solvent evaporation. Micro-OLED arrays with a pixel size down to 1 µm are successfully fabricated by further deposition of emitting/electron transport layers and top electrodes. This approach can open an avenue for low-cost manufacturing of flexible and high-resolution micro-displays.
Asunto(s)
Metales , Semiconductores , Electrodos , Diseño de EquipoRESUMEN
LaNbO4: Nd3+/Yb3+/Ho3+ phosphor was prepared by a conventional high temperature solid-state reaction method. The temperature dependence of up-conversion (UC) luminescence property of LaNbO4: Nd3+/Yb3+/Ho3+ phosphor under 808 nm excitation and the potential application of exploiting the red-to-green UC emission intensity ratio (IR/IG) of Ho3+ in temperature sensing were studied. Two-photon processes were confirmed to be responsible for both the green and the red UC emissions at different temperatures by analyzing the excitation power density dependent UC luminescence spectra measured at different temperatures. The energy level diagram was drawn to analyze the UC luminescence mechanism of Ho3+. In addition, it was found that the ratio IR/IG of Ho3+ was independent of the excitation power density of 808 nm laser under the current experimental condition, but it was sensitive to the temperature. And the temperature dependent UC luminescence spectra displayed that the ratio IR/IG exhibited a good linear increasing tendency with temperature rising. The obtained temperature sensing sensitivity was 2.04 × 10-3 K-1 in the temperature range of 303-693 K. The results suggest that LaNbO4: Nd3+/Yb3+/Ho3+ phosphor may be a good candidate for application in optical temperature sensors.