RESUMEN
This study explores the impact of electrostatic interactions and hydrogen bonding on tear film stability, a crucial factor for ocular surface health. While mucosal and meibomian layers have been extensively studied, the role of electrolytes in the aqueous phase remains unclear. Dry eye syndrome, characterized by insufficient tear quantity or quality, is associated with hyperosmolality, making electrolyte composition an important factor that might impact tear stability. Using a model buffer solution on a silica glass dome, we simulated physiologically relevant tear film conditions. Sodium chloride alone induced premature dewetting through salt crystal nucleation. In contrast, trace amounts of solutes with hydroxyl groups (sodium phosphate dibasic, potassium phosphate monobasic, and glucose) exhibited intriguing phenomena: quasi-stable films, solutal Marangoni-driven fluid influx increasing film thickness, and viscous fingering due to Saffman-Taylor instability. These observations are rationalized by the association of salt solutions with increased surface tension and the propensity of hydroxyl-group-containing solutes to engage in significant hydrogen bonding, altering local viscosity. This creates a viscosity contrast between the bulk buffer solution and the film region. Moreover, these solutes shield the glass dome, counteracting sodium chloride crystallization. These insights not only advance our understanding of tear film mechanics but also pave the way for predictive diagnostics in dry eye syndrome, offering a robust platform for personalized medical interventions based on individual tear film composition.
Asunto(s)
Electrólitos , Enlace de Hidrógeno , Lágrimas , Lágrimas/química , Electrólitos/química , Humanos , Viscosidad , Cloruro de Sodio/química , Fosfatos/química , Tensión Superficial , Electricidad Estática , Síndromes de Ojo Seco/metabolismo , Humectabilidad , Compuestos de PotasioRESUMEN
PURPOSE: To evaluate the in vitro wettability and coefficient of friction of a novel amphiphilic polymeric surfactant (APS), poly(oxyethylene)-co-poly(oxybutylene) (PEO-PBO) releasing silicone hydrogel (SiHy) contact lens material (serafilcon A), compared to other reusable SiHy lens materials. METHODS: The release of fluorescently-labelled nitrobenzoxadiazole (NBD)-PEO-PBO was evaluated from serafilcon A over 7 days in a vial. The wettability and coefficient of friction of serafilcon A and three contemporary SiHy contact lens materials (senofilcon A; samfilcon A; comfilcon A) were evaluated using an in vitro blink model over their recommended wearing period; t = 0, 1, 7, 14 days for all lens types and t = 30 days for samfilcon A and comfilcon A (n = 4). Sessile drop contact angles were determined and in vitro non-invasive keratographic break-up time (NIKBUT) measurements were assessed on a blink model via the OCULUS Keratograph 5 M. The coefficient of friction was measured using a nano tribometer. RESULTS: The relative fluorescence of NBD-PEO-PBO decreased in serafilcon A by approximately 18 % after 7 days. The amount of NBD-PEO-PBO released on day 7 was 50 % less than the amount released on day 1 (6.5±1.0 vs 3.4±0.5 µg/lens). The reduction in PEO-PBO in the lens also coincided with an increase in contact angles for serafilcon A after 7 days (p < 0.05), although there were no changes in NIKBUT or coefficient of friction (p > 0.05). The other contact lens materials had stable contact angles and NIKBUT over their recommended wearing period (p > 0.05), with the exception of samfilcon A, which had an increase in contact angle after 14 days as compared to t = 0 (p < 0.05). Senofilcon A and samfilcon A also showed an increase in coefficient of friction at 14 and 30 days, respectively, compared to their blister pack values (p < 0.05). CONCLUSION: The results indicate that serafilcon A gradually depletes its reserve of PEO-PBO over 1 week, but this decrease did not significantly change the lens performance in vitro during this time frame.
Asunto(s)
Lentes de Contacto Hidrofílicos , Siliconas , Humanos , Humectabilidad , Hidrogeles , FricciónRESUMEN
Contact lenses are one of the most successful applications of biomaterials. The chemical structure of the polymers used in contact lenses plays an important role in determining the function of contact lenses. Different types of contact lenses have been developed based on the chemical structure of polymers. When designing contact lenses, materials scientists consider factors such as mechanical properties, processing properties, optical properties, histocompatibility, and antifouling properties, to ensure long-term wear with minimal discomfort. Advances in contact lens materials have addressed traditional issues such as oxygen permeability and biocompatibility, improving overall comfort, and duration of use. For example, silicone hydrogel contact lenses with high oxygen permeability were developed to extend the duration of use. In addition, controlling the surface properties of contact lenses in direct contact with the cornea tissue through surface polymer modification mimics the surface morphology of corneal tissue while maintaining the essential properties of the contact lens, a significant improvement for long-term use and reuse of contact lenses. This review presents the material science elements required for advanced contact lenses of the future and summarizes the chemical methods for achieving these goals.
Asunto(s)
Lentes de Contacto , Siliconas , Hidrogeles , Biomimética , Oxígeno , PolímerosRESUMEN
As new ultra-soft materials are being developed for medical devices and biomedical applications, the comprehensive characterization of their physical and mechanical properties is both critical and challenging. To characterize the very low surface modulus of the novel biomimetic lehfilcon A silicone hydrogel contact lens coated with a layer of a branched polymer brush structure, an improved atomic force microscopy (AFM) nanoindentation method has been applied. This technique allows for precise contact-point determination without the effects of viscous squeeze-out upon approaching the branched polymer. Additionally, it allows individual brush elements to be mechanically characterized in the absence of poroelastic effects. This was accomplished by selecting an AFM probe with a design (tip size, geometry, and spring constant) that was especially suited to measuring the properties of soft materials and biological samples. The enhanced sensitivity and accuracy of this method allows for the precise measurement of the very soft lehfilcon A material, which has an extremely low elastic modulus in the surface region (as low as 2 kPa) and extremely high elasticity (nearly 100%) in an aqueous environment. The surface-characterization results not only reveal the ultra-soft nature of the lehfilcon A lens surface but also demonstrate that the elastic modulus exhibits a 30 kPa/200 nm gradient with depth due to the disparity between the modulus of the branched polymer brushes and the SiHy substrate. This surface-characterization methodology may be applied to other ultra-soft materials and medical devices.
Asunto(s)
Lentes de Contacto Hidrofílicos , Gastrópodos , Animales , Microscopía de Fuerza Atómica , Módulo de Elasticidad , Siliconas , PolímerosRESUMEN
Materials taking advantage of the characteristics of biological tissues are strongly sought after in medical science and bioscience. On the natural corneal tissue surface, the highly soft and lubricated surface is maintained by composite structures composed of hydrophilic biomolecules and substrates. To mimic this structure, the surface of a silicone hydrogel contact lens was modified with a biomimetic phospholipid polymer, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), and the nanoscaled morphology and mechanical properties of the surface were confirmed with advanced surface characterization and imaging techniques under an aqueous medium. Concavities and convexities on the nanometer order were recognized on the surface. The surface was completely covered with a PMPC layer and remained intact even after 30 days of clinical use in a human ocular environment. The mechanical properties of the natural corneal tissue and the PMPC-modified surface were similar in the living environment, that is, low modulus and frictional properties comparable to natural tissues. These results show the validity of material preparation by biomimetic methods. The methodologies developed in this study may contribute to future development of human-friendly medical devices.
Asunto(s)
Lentes de Contacto , Hidrogeles , Biomimética , Humanos , Fosforilcolina , Polímeros , Siliconas , Propiedades de SuperficieRESUMEN
Inspired by the cell membrane surface as well as the ocular tissue, a novel and clinically applicable antifouling silicone hydrogel contact lens material was developed. The unique chemical and biological features on the surface on a silicone hydrogel base substrate were achieved by a cross-linked polymer layer composed of 2-methacryloyloxyethyl phosphorylcholine (MPC), which was considered important for optimal on-eye performance. The effects of the polymer layer on adsorption of biomolecules, such as lipid and proteins, and adhesion of cells and bacteria were evaluated and compared with several conventional silicone hydrogel contact lens materials. The MPC polymer layer provided significant resistance to lipid deposition as visually demonstrated by the three-dimensional confocal images of whole contact lenses. Also, fibroblast cell adhesion was decreased to a 1% level compared with that on the conventional silicone hydrogel contact lenses. The movement of the cells on the surface of the MPC polymer-modified lens material was greater compared with other silicone hydrogel contact lenses indicating that lubrication of the contact lenses on ocular tissue might be improved. The superior hydrophilic nature of the MPC polymer layer provides improved surface properties compared to the underlying silicone hydrogel base substrate.
RESUMEN
A silicone hydrogel contact lens material, with a unique chemical and physical structure has been designed for long-term ocular performance. Enhancement of this silicone hydrogel contact lens material was achieved through surface modification using a cross-linkable bioinspired 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer, which creates a soft surface gel layer on the silicone hydrogel base material. The surface properties of this MPC polymer-modified lens were characterized under hydrated condition revealing, inter alia, its unique polymer structure, excellent hydrophilicity, lubricity, and flexibility. Analysis of the MPC polymer layer in a hydrated state was performed using a combination of a high-resolution environmental scanning electron microscopy and atomic force microscopy. Compared to the silicone hydrogel base material, this surface had a higher captive bubble contact angle, which corresponds to higher hydrophilicity of the surface. In addition, the hydrated MPC polymer layer exhibited an extremely soft surface and reduced the coefficient of friction by more than 80 %. These characteristics were attributed to the hydration state of the MPC polymer layer on the surface of the silicone hydrogel base material. Also, interaction force of protein deposition was lowered on the surface. Such superior surface properties are anticipated to contribute to excellent ocular performance.
Asunto(s)
Lentes de Contacto Hidrofílicos , Lentes de Contacto , Hidrogel de Polietilenoglicol-Dimetacrilato , Hidrogeles , Metacrilatos , Fosforilcolina/análogos & derivados , Polímeros , SiliconasRESUMEN
Autophagy is a homeostatic process that has been shown to be vital in the innate immune defense against pathogens. However, little is known about the regulatory role of autophagy in porcine teschovirus 2 (PTV-2) replication. In this study, we found that PTV-2 infection induces a strong increase in GFP-LC3 punctae and endogenous LC3 lipidation. However, PTV-2 infection did not enhance autophagic protein degradation. When cellular autophagy was pharmacologically inhibited by wortmannin or 3-methyladenine, PTV-2 replication increased. The increase in virus yield via autophagy inhibition was further confirmed by silencing atg5, which is required for autophagy. Furthermore, PTV-2 replication was suppressed when autophagy was activated by rapamycin. Together, the results suggest that PTV-2 infection activates incomplete autophagy and that autophagy then inhibits further PTV-2 replication.
Asunto(s)
Proteína 5 Relacionada con la Autofagia/antagonistas & inhibidores , Autofagia/efectos de los fármacos , Células Epiteliales/virología , Interacciones Huésped-Patógeno , Teschovirus/efectos de los fármacos , Replicación Viral/efectos de los fármacos , Adenina/análogos & derivados , Adenina/farmacología , Androstadienos/farmacología , Animales , Autofagia/genética , Proteína 5 Relacionada con la Autofagia/genética , Proteína 5 Relacionada con la Autofagia/metabolismo , Línea Celular , Células Epiteliales/efectos de los fármacos , Células Epiteliales/metabolismo , Regulación de la Expresión Génica , Genes Reporteros , Proteínas Fluorescentes Verdes/genética , Proteínas Fluorescentes Verdes/metabolismo , Riñón , Proteínas Asociadas a Microtúbulos/genética , Proteínas Asociadas a Microtúbulos/metabolismo , ARN Interferente Pequeño/genética , ARN Interferente Pequeño/metabolismo , Transducción de Señal , Sirolimus/farmacología , Porcinos , Teschovirus/genética , Teschovirus/crecimiento & desarrollo , Teschovirus/metabolismo , Replicación Viral/genética , WortmaninaRESUMEN
We report about the in vitro cytotoxicity and MRI studies of Gd(3+)ions-doped ultra-short single-walled carbon nanotube (gadonanotubes), gadonanotubes- reinforced poly(lactic-co-glycolic acid) (PLGA) polymer nanocomposites and in vivo small animal MRI studies using the gadonanotubes. These studies were performed to explore the suitability of gadonanotubes-reinforced PLGA polymer nanocomposite as a model scaffold for noninvasive magnetic resonance imaging (MRI) to evaluate nanotube release during the degradation process of the scaffold and their biodistribution upon release from the polymer matrix in vivo. The gadonanotubes at 1-100 ppm and the gadonanotubes/PLGA nanocomposites (2 wt % gadonanotubes) did not show any cytotoxicity in vitro as demonstrated using the LIVE/DEAD viability assay. For the first time, r(2) relaxivity measurements were obtained for the superparamagnetic gadonanotubes. In vitro 7T MRI of the superparamagnetic gadonanotubes ([Gd] = 0.15 mM) suspended in a biocompatible 1% Pluronic F127 solution, gave a r(2) value of 578 mM(-1) s(-1). Upon subcutaneous injection of the gadonanotubes suspension into the dorsal region of rats, the high r(2) value translated into excellent and prolonged negative contrast enhancement of in vivo T(2)weighted proton MRI images. The in vitro characterization of the nanocomposite discs and their degradation process by MRI, showed strong influence of the gadonanotube on water proton relaxations. These results indicate that the gadonanotubes/PLGA nanocomposites are suitable for further in vivo studies to track by MRI the biodegradation release and biodistribution of gadonanotubes.
Asunto(s)
Gadolinio/química , Imagen por Resonancia Magnética/métodos , Nanotubos de Carbono/química , Animales , Materiales Biocompatibles/química , Biodegradación Ambiental , Supervivencia Celular , Medios de Contraste/farmacología , Fibroblastos/citología , Iones , Ácido Láctico/química , Nanocompuestos/química , Nanotecnología/métodos , Poloxámero/química , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , RatasRESUMEN
Scaffolds play a pivotal role in the tissue engineering paradigm by providing temporary structural support, guiding cells to grow, assisting the transport of essential nutrients and waste products, and facilitating the formation of functional tissues and organs. Single-walled carbon nanotubes (SWNTs), especially ultra-short SWNTs (US-tubes), have proven useful for reinforcing synthetic polymeric scaffold materials. In this article, we report on the in vivo biocompatibility of US-tube reinforced porous biodegradable scaffolds in a rabbit model. US-tube nanocomposite scaffolds and control polymer scaffolds were implanted in rabbit femoral condyles and in subcutaneous pockets. The hard and soft tissue response was analyzed with micro-computed tomography (micro CT), histology, and histomorphometry at 4 and 12 weeks after implantation. The porous US-tube nanocomposite scaffolds exhibited favorable hard and soft tissue responses at both time points. At 12 weeks, a three-fold greater bone tissue ingrowth was seen in defects containing US-tube nanocomposite scaffolds compared to control polymer scaffolds. Additionally, the 12 week samples showed reduced inflammatory cell density and increased connective tissue organization. No significant quantitative difference in polymer degradation was observed among the various groups; qualitative differences between the two time points were consistent with expected degradation due to the progression of time. Although no conclusions can be drawn from the present study concerning the osteoinductivity of US-tube nanocomposite scaffolds, the results suggest that the presence of US-tubes may render nanocomposite scaffolds bioactive assisting osteogenesis.
Asunto(s)
Materiales Biocompatibles/metabolismo , Huesos/fisiología , Ensayo de Materiales , Nanocompuestos , Nanotubos de Carbono , Polímeros/metabolismo , Ingeniería de Tejidos , Animales , Fémur/citología , Fumaratos/química , Tamaño de los Órganos , Porosidad , Implantación de Prótesis , Conejos , Andamios del Tejido , Tomografía Computarizada por Rayos XRESUMEN
Injectable nanocomposites made of biodegradable poly(propylene fumarate) and the crosslinking agent propylene fumarate-diacrylate as well as each of three forms of single-walled carbon nanotubes (SWNTs) were evaluated for their in vitro cytotoxicity. Unreacted components, crosslinked networks, and degradation products of the nanocomposites were investigated for their effects on cell viability using a fibroblast cell line in vitro. The results did not reveal any in vitro cytotoxicity for purified SWNTs, SWNTs functionalized with 4-tert-butylphenylene, and ultra-short SWNTs at 1- 100 microg/mL concentrations. Moreover, nearly 100% cell viability was observed on all crosslinked nanocomposites and cell attachment on their surfaces was comparable with that on tissue culture polystyrene. The degradation products of the nanocomposites displayed a dose-dependent adverse effect on cells, which was partially due to increased osmolarity by the conditions of accelerated degradation and could be overcome at diluted concentrations. These results demonstrate that all three tested nanocomposites have favorable cytocompatibility for potential use as scaffolds for bone tissue engineering applications.
Asunto(s)
Materiales Biocompatibles/farmacología , Fibroblastos/citología , Fibroblastos/efectos de los fármacos , Nanocompuestos , Nanotubos de Carbono , Polímeros/farmacología , Animales , Adhesión Celular/efectos de los fármacos , Muerte Celular/efectos de los fármacos , Línea Celular , Supervivencia Celular/efectos de los fármacos , Reactivos de Enlaces Cruzados/farmacología , Fluorescencia , Microscopía Confocal , RatasRESUMEN
A precipitation screening method using a 96-well microtiter plate was developed to evaluate in vitro drug precipitation kinetics of liquid formulations for poorly water-soluble compounds, using milligram quantities of compounds and milliliter volumes of biorelevant media. By using this method we identified three formulations showing distinct in vitro precipitation kinetics (fast, slow, and no precipitation) for a model new molecular entity (JNJ-25894934). The in vitro precipitation profiles in simulated intestinal fluid (SIF), fasted state simulated intestinal fluid (FaSSIF), and fed state simulated intestinal fluid (FeSSIF) were compared with those measured by a USP dissolution method, and with in vivo absorption at the fasted and fed states in canine pharmacokinetic (PK) studies. The precipitation kinetics of all three formulations in the initial hours measured by the screening method correlated to those determined by the USP method (R(2) = 0.96). The PK results showed that the fast-precipitation formulation had the lowest bioavailability. However, a similar bioavailability was observed for the slow- and no-precipitation formulations. The oral bioavailability of JNJ-25894934 at the fed state was also significantly higher than that at the fasted state for all three formulations (p < 0.05). In addition, the in vitro precipitation profiles in FeSSIF correlated better with in vivo absorption than those in SIF and FaSSIF.
Asunto(s)
Preparaciones Farmacéuticas/química , Farmacocinética , Animales , Precipitación Química , Química Farmacéutica , Perros , Evaluación Preclínica de Medicamentos/métodos , Preparaciones Farmacéuticas/sangre , Polietilenglicoles/química , Solubilidad , Estearatos/químicaRESUMEN
This study investigates the effects of nanostructure size and surface area on the rheological properties of un-cross-linked poly(propylene fumarate) (PPF) nanocomposites and the mechanical properties of cross-linked nanocomposites as a function of the nanostructure loading. Three model carbon nanostructures were examined, C(60) fullerenes, ultra-short single-walled carbon nanotubes (US-tubes) and single-walled carbon nanotubes (SWNTs). Rheological measurements showed that C60 and US-tube un-cross-linked nanocomposites exhibited viscous-like characteristics with the complex viscosity independent of frequency for nanostructure concentrations up to 1 wt%. Compressive and flexural mechanical testing demonstrated significant mechanical reinforcement of US-tube and SWNT nanocomposites as compared to cross-linked polymer alone, with an up to twofold increase in the mechanical properties. Scanning electron microscopy examination of the fracture surface of cross-linked US-tube nanocomposite revealed lack of aggregation of US-tubes. Although sol fraction studies did not provide any evidence of additional cross-linking, due to the presence of US-tubes in the nanocomposites, transmission electron microscopy studies suggested the crystallization of PPF on the surface of US-tubes which can contribute to the mechanical reinforcement of the US-tube nanocomposites. These results demonstrate that the rheological properties of un-cross-linked nanocomposites depend mainly on the carbon nanostructure size, whereas the mechanical properties of the cross-linked nanocomposites are dependent on the carbon nanostructure surface area. The data also suggest that US-tube nanocomposites are suitable for further consideration as injectable scaffolds for bone tissue engineering applications.
Asunto(s)
Huesos , Carbono/química , Nanocompuestos/química , Nanoestructuras/química , Polímeros/química , Ingeniería de Tejidos/métodos , Materiales Biocompatibles/administración & dosificación , Materiales Biocompatibles/química , Huesos/química , Huesos/metabolismo , Fuerza Compresiva , Reactivos de Enlaces Cruzados/química , Ensayo de Materiales , Modelos Químicos , Nanocompuestos/ultraestructura , Nanoestructuras/ultraestructura , Nanotecnología/métodos , Reología , ViscosidadRESUMEN
We investigated the fabrication of highly porous scaffolds made of three different materials [poly(propylene fumarate) (PPF) polymer, an ultra-short single-walled carbon nanotube (US-tube) nanocomposite, and a dodecylated US-tube (F-US-tube) nanocomposite] in order to evaluate the effects of material composition and porosity on scaffold pore structure, mechanical properties, and marrow stromal cell culture. All scaffolds were produced by a thermal-crosslinking particulate-leaching technique at specific porogen contents of 75, 80, 85, and 90 vol%. Scanning electron microcopy, microcomputed tomography, and mercury intrusion porosimetry were used to analyze the pore structures of scaffolds. The porogen content was found to dictate the porosity of scaffolds. There was no significant difference in porosity, pore size, and interconnectivity among the different materials for the same porogen fraction. Nearly 100% of the pore volume was interconnected through 20microm or larger connections for all scaffolds. While interconnectivity through larger connections improved with higher porosity, compressive mechanical properties of scaffolds declined at the same time. However, the compressive modulus, offset yield strength, and compressive strength of F-US-tube nanocomposites were higher than or similar to the corresponding properties for the PPF polymer and US-tube nanocomposites for all the porosities examined. As for in vitro osteoconductivity, marrow stromal cells demonstrated equally good cell attachment and proliferation on all scaffolds made of different materials at each porosity. These results indicate that functionalized ultra-short single-walled carbon nanotube nanocomposite scaffolds with tunable porosity and mechanical properties hold great promise for bone tissue engineering applications.
Asunto(s)
Materiales Biocompatibles , Huesos/fisiología , Nanocompuestos , Nanotubos de Carbono , Ingeniería de Tejidos , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Fuerza Compresiva , Fumaratos/química , Fumaratos/metabolismo , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Estructura Molecular , Nanotubos de Carbono/química , Polímeros/química , Polímeros/metabolismo , Porosidad , Estrés Mecánico , Propiedades de SuperficieRESUMEN
We have investigated the dispersion of single-walled carbon nanotubes (SWNTs) and functionalized SWNTs (F-SWNTs) in the unsaturated, biodegradable polymer poly(propylene fumarate) (PPF) and examined the rheological properties of un-cross-linked nanocomposite formulations as well as the electrical and mechanical properties of cross-linked nanocomposites. F-SWNTs were produced from individual SWNTs by a diazonium-based method and dispersed better than unmodified SWNTs in both un-cross-linked and cross-linked PPF matrix. Cross-linked nanocomposites with F-SWNTs were superior to those with unmodified SWNTs in terms of their mechanical properties. Specifically, nanocomposites with 0.1 wt % F-SWNTs loading resulted in a 3-fold increase in both compressive modulus and flexural modulus and a 2-fold increase in both compressive offset yield strength and flexural strength when compared to pure PPF networks, whereas the use of 0.1 wt % SWNTs gained less than 37% mechanical reinforcement. These extraordinary mechanical enhancements considered together with Raman scattering and sol fraction measurements indicate strong SWNT-PPF interactions and increased cross-linking densities resulting in effective load transfer. With enhanced mechanical properties and capabilities of in situ injection and cross-linking, these SWNT/polymer nanocomposites hold significant implications for the fabrication of bone tissue engineering scaffolds.
Asunto(s)
Huesos , Resinas Compuestas/química , Nanotubos de Carbono/química , Polímeros/química , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodos , Materiales Biocompatibles/administración & dosificación , Materiales Biocompatibles/química , Huesos/química , Huesos/metabolismo , Resinas Compuestas/administración & dosificación , Reactivos de Enlaces Cruzados/química , Conductividad Eléctrica , Inyecciones , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Nanotubos de Carbono/ultraestructura , Reología , Espectrometría Raman , Temperatura , ViscosidadRESUMEN
Bone tissue engineering could provide an alternative to conventional treatments for fracture nonunion, spinal fusion, joint replacement, and pathological loss of bone. However, this approach will require a biocompatible matrix to allow progenitor cell delivery and support tissue invasion. The construct must also support physiological loads as it degrades to allow the regenerated tissue to bear an increasing load. To meet these complex requirements, we have employed topology-optimized design and solid free-form fabrication to manufacture biodegradable poly(propylene fumarate)/beta-tricalcium phosphate composites. These scaffolds were seeded with primary human fibroblasts transduced with an adenovirus expressing bone morphogenetic protein-7 and implanted subcutaneously in mice. Specimens were evaluated by microcomputed tomography, compressive testing, and histological staining. New bone was localized on the scaffold surface and closely followed its designed contours. Furthermore, the total stiffness of the constructs was retained for up to 12 weeks after implantation, as scaffold degradation and tissue invasion took place.
Asunto(s)
Regeneración Ósea , Huesos/fisiología , Fibroblastos/fisiología , Terapia Genética/métodos , Polímeros/química , Ingeniería de Tejidos/métodos , Adenoviridae/genética , Animales , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Biodegradación Ambiental , Proteína Morfogenética Ósea 7 , Proteínas Morfogenéticas Óseas/genética , Proteínas Morfogenéticas Óseas/metabolismo , Huesos/citología , Fosfatos de Calcio/química , Técnicas de Cultivo de Célula , Células Cultivadas , Fuerza Compresiva , Matriz Extracelular/metabolismo , Fibroblastos/citología , Fibroblastos/diagnóstico por imagen , Fibroblastos/metabolismo , Fibroblastos/trasplante , Fumaratos/química , Vectores Genéticos , Encía/citología , Histocitoquímica , Técnicas Histológicas , Humanos , Inyecciones Subcutáneas , Ensayo de Materiales , Ratones , Polipropilenos/síntesis química , Polipropilenos/química , Factores de Tiempo , Tomografía Computarizada por Rayos X , Factor de Crecimiento Transformador beta/genética , Factor de Crecimiento Transformador beta/metabolismo , Trasplante HeterólogoRESUMEN
This work investigated the effects of the use of a surfactant or the functionalization of single-walled carbon nanotubes (SWNTs) on their dispersion in uncrosslinked poly(propylene fumarate) (PPF) and the mechanical reinforcement of crosslinked composites as a function of the SWNT concentration. Rheological measurements showed good dispersion of SWNTs in uncrosslinked PPF at low concentrations of 0.05 wt% and SWNT aggregation for higher concentrations for all formulations examined. Mechanical testing demonstrated significant reinforcement in the compressive and flexural mechanical properties of crosslinked nanocomposites which peaked for low SWNT concentrations of the order of 0.05 wt%. For example, a 74% increase was recorded for the compressive modulus and a 69% increase for the flexural modulus of nanocomposites with functionalized SWNTs at a 0.05 wt% loading. Nevertheless, this reinforcement was not related to the use of a surfactant or the functionalization of the SWNTs tested. Scanning electron microscopy examinations of fractured nanocomposite surfaces revealed the formation of SWNT aggregates at higher concentrations corroborating the rheological and mechanical data. These results suggest that the dispersion of individual SWNTs in a uncrosslinked formulation is pivotal to the development of injectable nanocomposites for bone tissue engineering applications.
RESUMEN
Bioactive metallic materials, which can directly bond to living bone, are badly needed in dental and orthopedic implants for better long-term results. Forming a layer of bone-like apatite on the surface of the metal is one of the most promising methods to increase its bioactivity. This study creates a new chemical treatment for zirconium metal to induce apatite formation in a simulated body fluid (SBF), and analyzes the apatite layer by using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR). Zirconium samples were soaked in 10% CuCl2 aqueous solution at 80 degrees C for 72 hours, heat-treated at 500 degrees C for one hour and soaked in SBF for various periods. An apatite-like layer appeared on the zirconium surface as early as three days in SBF, and increased with immersion time. EDS and FTIR confirmed that the deposited layer was apatite. This implies that bioinert zirconium metal can become bioactive by forming an apatite layer in a simulated body fluid after a suitable chemical treatment. The ZrOOH+ hydrogel layer produced on the zirconium surface by CuCl2 and heat-treatments is thought to induce the apatite formation.
Asunto(s)
Apatitas/síntesis química , Materiales Biocompatibles/química , Hidrogel de Polietilenoglicol-Dimetacrilato/síntesis química , Circonio/química , Líquidos Corporales , Cobre/química , Calor , Microscopía Electrónica de Rastreo , Espectrometría por Rayos X , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Circonio/análisisRESUMEN
In order to observe the effect of type I collagen on the susceptibility of low density lipoprotein (LDL) to oxidation, the collagen gel system was established in vitro. The presence of collagen resulted in a protracted lag phase as well as a decreased production of the thiobarbituric acid reactive substance (TBARS) when LDL was oxidized by the addition of copper ion. The relative electrophoretic mobilities (REM) of LDL in the treated group were far lower than those in the control group; while during the 2,2'-amidinopropane hydrochloride(AAPH)-catalyzed oxidation of LDL, neither the lag phase nor the maximum content of the output of TBARS were significantly affected by the presence of collagen. These results suggest that collagen may decrease the susceptibility of LDL to copper-catalyzed oxidation the mechanism of which may not involve the capture of free radicals.