Development of smart colorimetric indicators for tracking kimchi freshness by loading aronia extract in agar, κ-carrageenan, and cellulose nanofiber films.

Color indicator films incorporating aronia extract powder (AEP) and biopolymers like agar, carrageenan, and cellulose nanofiber (CNF) were developed to monitor kimchi freshness. AEP-containing films showed strong UV-barrier properties, and reduced light transmittance by 99.12 % for agar, 98.86 % for carrageenan, and 98.67 % for CNF-based films. All AEP-films exhibited high sensitivity to pH changes and vapor exposure to ammonia and acetic acid. Color change notably influenced by the polymer type, particularly evident with ammonia vapor exposure, especially in the AEP/carrageenan film. The chemical structure and thermal stability of the biopolymers remained unchanged after AEP-addition. Tensile strength increased by 24.2 % for AEP/CNF but decreased by 19.4 % for AEP/agar and 24.3 % for AEP/carrageenan films. AEP-containing films displayed strong antioxidant activity, with 99 % free radical scavenging in ABTS and ~ 80 % in DPPH assays. Alkalized AEP-indicator films were more effective in detecting color changes during kimchi packaging tests. Among the labels, alkalized AEP/agar film showed the most obvious color change from green-gray (fresh kimchi, pH 5.5, acidity 0.48 %) to pale brown (optimal fermentation, pH 4.6, acidity 0.70 %), and pale violet-brown (over-fermented, pH 3.80, acidity 1.35 %). Alkalized AEP-indicator films offer promising real-time detection of packed fermented foods like kimchi.

Development of innovative active packaging films using gelatin/pullulan-based composites incorporated with cinnamon essential oil-loaded metal-organic frameworks for meat preservation.

This study aimed to investigate the effect of cinnamon essential oil (CEO)-loaded metal-organic frameworks (CEO@MOF) on the properties of gelatin/pullulan (Gel/Pull)-based composite films (Gel/Pull-based films). The incorporation of CEO@MOF into Gel/Pull-based films demonstrated significant antimicrobial activity against S. aureus, S. enterica, E. coli, and L. monocytogenes. Additionally, CEO@MOF integrated film exhibited a 98.16 % ABTS radical scavenging, with no significant change in the mechanical properties of the neat Gel/Pull film. The UV blocking efficiency of the composite films increased significantly from 81.38 to 99.56 % at 280 nm with the addition of 3 wt% CEO@MOF. Additionally, Gel/Pull/CEO@MOF films effectively extended the shelf life of meat preserved at 4 °C by reducing moisture loss by 3.35 %, maintaining the pH within the threshold limit (6.2), and inhibiting bacterial growth by 99.9 %. These results propose that CEO@MOF has significant potential as an effective additive in active packaging to improve shelf life and food safety.

Cellulose nanofiber-based multifunctional composite films integrated with zinc doped-grapefruit peel-based carbon quantum dots.

This study aimed to develop a multifunctional active composite film to extend the shelf life of minced pork. The composite film was prepared by incorporating zinc-doped grapefruit peel-derived carbon quantum dots (Zn-GFP-CD) into a cellulose nanofiber (CNF) matrix. The resulting film significantly improved UV-blocking properties from 39.0 % to 85.7 % while maintaining the film transparency. Additionally, the CNF/Zn-GFP-CD5% composite film exhibits strong antioxidant activity with ABTS and DPPH radical scavenging activities of 99.8 % and 77.4 %, respectively. The composite film also showed excellent antibacterial activity against both Gram-negative and Gram-positive bacteria. When used in minced pork packaging, the composite films effectively inhibit bacterial growth, maintaining bacterial levels below 7 Log CFU/g after 15 days and sustaining a red color over a 21-day storage period. Additionally, a significant reduction in the lipid oxidation of the minced pork was observed. These CNF/Zn-GFP-CD composite films have a great potential for active food packaging applications to extend shelf life and maintain the visual quality of packaged meat.

Fabrication and Application of Turmeric Extract-Incorporated Oleogels Structured with Xanthan Gum and Soy Lecithin by Emulsion Template.

Turmeric extract (TE)-loaded oleogels (TE-OG) was fabricated by an emulsion template technique using xanthan gum (XG) and soy lecithin (SL) as oleogelators. The formulation for TE-OG was optimized using 0.32% XG, 1.2% SL, and 1.0% TE. The optimized TE-OG had a minimal particle size of 810.23 ± 10.68 nm as measured by the dynamic light scattering (DLS) method, and a high encapsulation efficiency (EE) of 96.62 ± 0.56%. Additionally, the optimized TE-OG exhibited a favorable zeta potential of -27.73 ± 0.44 mV, indicating the good stability of the TE-OG due to the electrostatic repulsion between particles. TE-OG formulated with 0.32% XG and 1.2% SL was subjected to frequency sweep testing to evaluate its solid-like rheological behavior. The oil-binding capacity (OBC) of TE-OG was consistently maintained above 99.99%. In vitro digestion of TE-OG demonstrated the potential of the emulsion template for controlled release, with less than 20% of the encapsulated curcumin being released in simulated gastric fluid (SGF), whereas nearly 70% was released in the simulated intestinal fluid (SIF). Moreover, TE-OG affected the rapid release of free fatty acids (FFAs), which have a positive effect on the digestion of triacylglycerols found in soybean oil (SO). TE-OG was further used as an alternative to commercial butter to produce pound cakes, and their rheological properties were compared to those of the pound cake prepared using commercial butter. The pound cake prepared using TE-OG showed a noticeable decrease in hardness from 10.08 ± 1.39 N to 7.88 ± 0.68 N and increased porosity, demonstrating the inherent capability of TE-OG to enhance the overall quality standards of bakery products.

Carrageenan-based active and intelligent packaging films integrated with anthocyanin and TiO2-doped carbon dots derived from sweet potato peels.

Carrageenan-based sustainable active and pH-dependent color-changing composite films were fabricated by blending anthocyanin extracted from sweet potato peel (SPA) with TiO2-doped carbon dots (Ti-CDs) prepared using the biowaste of SPA extraction. The SPA and Ti-CDs were compatible with the carrageenan matrix and were uniformly dispersed in the used polymer to form a homogeneous film with increased mechanical properties. The composite film added with SPA and 3 wt% Ti-CD showed 100 % UV protection, superb antioxidant (100 % DPPH and ABTS scavenging assay), and potent antibacterial activity (complete eradication of foodborne L.monocytogenes and E. coli strains after 3 h incubation). Additionally, the composite films showed distinguishable colorimetric responses to pH 7-12 buffers and volatile ammonia. The intelligent sensing ability of the composite film was assessed through shrimp freshness monitoring, and the film's hue shifted from pink (fresh shrimp) to yellow/brown (inedible shrimp) during storage. Shrimp packaging studies have shown that composite films retard the rate of food quality change during storage and are a good indicator of shrimp spoilage. Therefore, the designed film is expected to have high applicability as a chip, and quick on-site sensor that detects seafood quality in real-time, and a highly effective multifunctional film for better product quality preservation.

Sustainable packaging film based on cellulose nanofibres/pullulan impregnated with zinc-doped carbon dots derived from avocado peel to extend the shelf life of chicken and tofu.

A cellulose nanofiber (CNF)/pullulan (PUL) based multifunctional composite film was developed for active packaging applications by incorporating Zn-doped avocado-derived carbon dots (Zn-ACDs). The incorporation of Zn-ACDs improved the interfacial compatibility and produced a dense cross-sectional structure of the composite films. The Zn-ACDs added film showed no significant difference in water vapor permeability and surface hydrophilicity compared to the neat CNF/PUL film, but the tensile strength and elongation at break increased by ~45.4 % and ~64.1 %, respectively. The addition of 5 wt% Zn-ACDs to the CNF/PUL matrix resulted in 100.0 % UV blocking properties, excellent antioxidant activity (100.0 % for ABTS and 68.0 % for DPPH), and complete eradication of foodborne pathogens such as Listeria monocytogenes ATCC 15313 and Escherichia coli O157:H7 after 3 h of exposure. The CNF/PUL composite film with Zn-ACDs applied to the active packaging of chicken and tofu significantly reduced the total growth of aerobic microorganisms without significantly changing the actual color of the packaged chicken and tofu for 9 days at 10°C. This study demonstrates that CNF/PUL composite films with Zn-ACDs are a sustainable and environmentally friendly option for protecting food from microbial contamination.

Gelatin/poly(vinyl alcohol)-based dual functional composite films integrated with metal-organic frameworks and anthocyanin for active and intelligent food packaging.

Innovative active and pH-colorimetric composite films were fabricated from gelatin/poly(vinyl alcohol) (Gel/PVA) integrated with copper-based metal-organic frameworks (Cu-MOFs) and red cabbage anthocyanin (RCA). The incorporation of Cu-MOFs improved the tensile strength, water resistance, and UV shielding properties of the developed composite films. The addition of anthocyanins and 3 wt% Cu-MOFs endowed the polymer matrix with excellent antioxidant (100 % against ABTS and DPPH radicals) and antibacterial (against Gram-positive and Gram-negative foodborne pathogenic bacteria) functions. The fabricated composite films exhibited significant color change at alkaline conditions of pH 7-12 and a marked color change upon exposure to ammonia. The designed indicator films used for shrimp freshness tracking and a visual color change from pink (for fresh shrimp) to green (for spoiled shrimp) was observed during storage at 28 °C for 24 h. The potential applications of the engineered composite films were studied by shrimp packaging, and the quality parameters of packaged samples were monitored during storage. The synergistic effects of adding anthocyanins and MOF nanostructures works for better product freshness preservation and responds well to shrimp spoilage level, introducing novel active and intelligent packaging options for practical smart packaging applications.

Facile Synthesis of Multifunctional Carbon Dots from Spent Gromwell Roots and Their Application as Coating Agents.

Spent Gromwell root-based multifunctional carbon dots (g-CDs) and sulfur-functionalized g-CDs (g-SCDs) were synthesized using a hydrothermal method. The mean particle size of g-CDs was confirmed to be 9.1 nm by TEM (transmission electron microscopy) analysis. The zeta potentials of g-CDs and g-SCDs were mostly negative with a value of -12.5 mV, indicating their stability in colloidal dispersion. Antioxidant activities were 76.9 ± 1.6% and 58.9 ± 0.8% for g-CDs, and 99.0 ± 0.1% and 62.5 ± 0.5% for g-SCDs by 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging tests, respectively. In addition, the bathochromic shift of g-CDs is observed when their emission peaks appear at a higher wavelength than the excitation peaks. The prepared g-CDs and g-SCDs solutions were used as a coating agent for potato slices. The browning index of the control potato slices increased significantly from 5.0 to 33.5% during 24 to 72 h storage. However, the sample potato slices coated with g-CDs or g-SCDs suppressed the increase in the browning index. In particular, the browning index of the potato slices coated with g-SCDs ranged from 1.4 to 5.5%, whereas the potato slices coated with g-CDs had a browning index ranging from 3.5 to 26.1%. The g-SCDs were more effective in delaying oxidation or browning in foods. The g-CDs and g-SCDs also played a catalytic role in the Rhodamine B dye degradation activity. This activity will be useful in the future to break down toxins and adulterants in food commodities.

pH-sensitive smart indicators based on cellulose and different natural pigments for tracing kimchi ripening stages.

Five natural pigments including water-soluble [butterfly pea (BP), red cabbage (RC), and aronia (AR)] and alcohol-soluble [shikonin (SK) and alizarin (ALZ)] were extracted, characterized, and loaded onto cellulose for preparing pH-sensitive indicators. The indicators were tested for their color response efficiency, gas sensitivity, response to lactic acid, color release, and antioxidant activity. Cellulose-water soluble indicators showed more obvious color changes than alcohol-soluble indicators in lactic acid solution and pH solutions (1-13). All cellulose-pigment indicators exhibited prominent sensitivity to ammonia compared to acidic vapor. Antioxidant activity and release behavior of the indicators were influenced by pigment type and simulants. Kimchi packaging test was carried out using original and alkalized indicators. The alkalized indicators were more effective in showing visible color changes during kimchi storage than the original indicators, and cellulose-ALZ displayed the most distinct color change from violet (fresh kimchi, pH 5.6, acidity 0.45 %) to gray (optimum fermented kimchi, pH 4.7, acidity 0.72 %), and to yellow (over fermented kimchi, pH 3.8, acidity 1.38 %) which followed by BP, AR, RC, SK respectively. The findings of the study suggest that the alkalization method could be used to show noticeable color changes in a narrow pH range for application with acidic foods.

Recent progress of bioplastics in their properties, standards, certifications and regulations: A review.

The environmental impact associated with fossil fuel-based polymers has paved the way to explore biopolymer-based plastics, their properties, and their applications. Bioplastics are polymeric materials that are greatly interesting due to their eco-friendlier and non-toxic nature. In recent years, exploring the different sources of bioplastics and their applications has become one of the active research areas. Biopolymer-based plastics have applications in food packaging, pharmaceuticals, electronics, agricultural, automotive and cosmetic sectors. Bioplastics are considered safe, but there are several economic and legal challenges to implementing them. Hence, this review aims to i) outline the terminology associated with bioplastics, its global market, major sources, types and properties of bioplastics, ii) discuss the major bioplastic waste management and recovery options, iii) provide the major standards and certifications regarding bioplastics, iv) explore the various country-wise regulations and restrictions associated with bioplastics, and v) enumerate the various challenges and limitations associated with bioplastics and future directions. Therefore, providing adequate knowledge about various bioplastics, their properties and regulatory aspects can be of great importance in the industrialization, commercialization and globalization of bioplastics to replace petroleum-based products.

Carbon Dots: Opportunities and Challenges in Cancer Therapy.

Recently, carbon dots (CDs) have been actively studied and reported for their various properties. In particular, the specific characteristics of carbon dots have been considered as a possible technique for cancer diagnosis and therapy. This is also a cutting-edge technology that offers fresh ideas for treating various disorders. Though carbon dots are still in their infancy and have not yet shown their value to society, their discovery has already resulted in some noteworthy advancements. The application of CDs indicates conversion in natural imaging. Photography using CDs has demonstrated extraordinary appropriateness in bio-imaging, the discovery of novel drugs, the delivery of targeted genes, bio-sensing, photodynamic therapy, and diagnosis. This review seeks to provide a comprehensive understanding of CDs, including their benefits, characteristics, applications, and mode of action. In this overview, many CD design strategies will be highlighted. In addition, we will discuss numerous studies on cytotoxic testing to demonstrate the safety of CDs. The current study will address the production method, mechanism, ongoing research, and application of CDs in cancer diagnosis and therapy.

Observation of curcumin-encapsulated Pickering emulsion stabilized by cellulose nanocrystals-whey protein isolate (CNCs-WPI) complex under in vitro lipid digestion through INFOGEST model.

Curcumin-encapsulated Pickering emulsion (Cur-PE) was successfully prepared using cellulose nanocrystals (CNCs)-whey protein isolate (WPI) complex as a stabilizer to control the size and stability of the Cur-PE. Firstly, needle-like CNCs were prepared by acid hydrolysis, and the mean particle size, polydispersity index (PDI), zeta potential, and aspect ratio of the CNCs were 100.7 nm, 0.32, -43.6 mV, and 20.8, respectively. The Cur-PE-C0.5W0.1, prepared with 0.5 wt% CNCs and 0.1 wt% WPI at pH 2, had a mean droplet size of 230.0 nm, PDI of 0.275, and zeta potential of +53.5 mV. The Cur-PE-C0.5W0.1 prepared at pH 2 exhibited the highest stability during storage for 14 days. FE-SEM revealed that the droplets of the Cur-PE-C0.5W0.1 prepared at pH 2 were spherical and fully covered by CNCs. The adsorption of CNCs at the oil-water interface increases the encapsulation efficiency (89.4 %) of curcumin in the Cur-PE-C0.5W0.1 and protects curcumin from pepsin digestion in the gastric phase. However, the Cur-PE-C0.5W0.1 was sensitive to release curcumin in the intestine phase. The CNCs-WPI complex developed in this study could serve as a promising stabilizer to make Pickering emulsions stable at pH 2 for the encapsulation and delivery of curcumin to the expected target area.

Enhancement of Storage Stability and Masking Effect of Curcumin by Turmeric Extract-Loaded Nanoemulsion and Water-Soluble Chitosan Coating.

This study focused on improving curcumin stability in various pHs and NaCl concentrations and reducing the strong scent of turmeric by the nanoemulsions system and further coating with water-soluble chitosan (WSC). Turmeric extract-loaded nanoemulsions (TE-NEs) were firstly prepared by mixing an oil phase containing turmeric extract, MCT oil, and lecithin, and an aqueous phase containing tween 80 using an ultrasonication method. TE-NEs were further coated with WSC in the ratio of TE-NEs and WSC (1:1 to 1:10). The optimum WSC-TE-NEs exhibited an average particle size of 182 nm, a PDI of 0.317, and a zeta potential of +30.42 mV when WSC-TE-NEs were prepared in the ratio of 1:1. The stability of the WSC-TE-NEs was also assessed by determining the remained curcumin content. The remained curcumin contents of the TE-NEs and the WSC-TE-NEs were higher than that of the turmeric extract (TE) at pH 2~7 and NaCl concentrations of 100~400 mM. Fourier transform infrared (FT-IR) spectra, transmission electron microscope (TEM), and confocal laser scanning microscope (CLSM) images confirmed that the TE-NEs were successfully encapsulated with a WSC coating. As a result of GC analysis, the content of aromatic-turmerone was significantly decreased in the TE-NEs and the WSC-TE-NEs compared to the pristine TE, but there was no significant difference between the TE-NEs and the WSC-TE-NEs. These results suggest that water-soluble chitosan-coated nanoemulsions may be suitable for improving the chemical stability and masking effect of curcumin to facilitate its application in food.

Antimicrobial, antioxidant, and pH-sensitive polyvinyl alcohol/chitosan-based composite films with aronia extract, cellulose nanocrystals, and grapefruit seed extract.

Aronia or black chokeberry (Aronia melanocarpa), cellulose nanocrystals (CNCs), and grapefruit seed extract (GSE) were used for the preparation of multifunctional polyvinyl alcohol/chitosan (PVA/CS) composite films with pH-sensitivity, antimicrobial, antioxidant, and UV-barrier properties. Aronia extract showed total phenolic content of 297 ± 0.5 µg GAE/mg aronia extract, potent antioxidant activity, and high color-response efficiency. Isolated CNCs showed a needle-like structure with a length of 470 nm and a width of 35 nm. The tensile strength of the PVA/CS composite film increased by 74% after the incorporation of CNCs, whereas the film flexibility was enhanced by 75% after adding GSE. The PVA/CS-A (aronia extract) composite film showed a significant color change at different pHs and potent antioxidant activity. At the same time, the PVA/CS-G (GSE) showed the highest antimicrobial activity against Escherichia coli (Gram-negative) and Listeria monocytogenes (Gram-positive) bacteria. The PVA/CS-CGA composite film, reinforced with CNCs/GSE/Aronia extract, showed the highest UV-barrier (95.5%), highest antioxidant activity (95%), potent antimicrobial activity, pH-sensitivity, lowest water vapor permeability (WVP), and desirable mechanical properties. The multifunctional properties of the produced composite films encourage their use as active and intelligent food packaging films to extend shelf life and monitor food quality.

The role of nanostructured lipid carriers and type of biopolymers on the lipid digestion and release rate of curcumin from curcumin-loaded oleogels.

Curcumin-nanostructured lipid carrier-loaded oleogels (Cur-NLC-OGs) have been developed with biopolymer cryogels as an efficient delivery system to overcome the extremely low water solubility and instability of curcumin. The effect of NLC and biopolymer types on the encapsulation and release of curcumin from Cur-OGs was investigated. Alginate, carboxymethyl cellulose (CMC), and pectin solutions were firstly freeze dried to make biopolymer cryogels and they were mixed with Cur and Cur-NLC to obtain stable and self-standing Cur-OGs and Cur-NLC-OGs, respectively. As compared to Cur-OGs, Cur-NLC-OGs had higher encapsulation efficiency and showed slower release of curcumin under acidic condition. Although Cur-NLC affected the rapid release of free fatty acids, the Cur-NLC-OGs prepared with CMC cryogel was most efficient in delaying lipid digestion. Overall, NLC and CMC-based OGs could be effectively used to improve encapsulation efficiency and control lipolysis of lipid droplets. These results will be advantageous for the development of oleogels with desirable functionality.

Enhanced bioaccessibility and stability of iron through W/O/W double emulsion-based solid lipid nanoparticles and coating with water-soluble chitosan.

W/O/W double emulsion-based iron-solid lipid nanoparticles (Fe-SLNs) and water-soluble chitosan-coated Fe-SLNs (WSC-Fe-SLNs) were developed to increase the bioaccessibility and stability of iron. Fe-SLNs exhibited a small diameter (158.17 ± 0.72 nm) and adequate zeta potential (-34.31 ± 0.41 mV) to maintain stable dispersion. The coating with WSC resulted in an increase in particle diameter (up to 226.13 ± 1.97 nm) and change of zeta potential to positive value (+47.83 ± 1.24 mV) because of the amine groups of chitosan. The lipid peroxidation of the Fe-SLNs and WSC-Fe-SLNs was substantially lower than that of pure iron. Both Fe-SLNs and WSC-Fe-SLNs were also able to protect the encapsulated iron in simulated gastric fluid, while effectively releasing almost 80% of the iron in simulated intestinal fluid. The Fe-SLNs and WSC-Fe-SLNs showed a great potential as functional materials to apply to various food industries through enhancement of physical stability and bioaccessibility of the encapsulated iron.

Observation of curcumin-loaded hydroxypropyl methylcellulose (HPMC) oleogels under in vitro lipid digestion and in situ intestinal absorption in rats.

Curcumin-loaded nanostructured lipid carriers (Cur-NLCs)-based hydroxypropyl methylcellulose (HPMC) oleogels (Cur-NLCs-HPMC-OGs) were fabricated using a cryogel template. The effect of the HPMC viscosity grade on the oleogel characteristics and in situ intestinal absorption were examined. Highly stable Cur-NLCs were prepared with a mean particle size of 314 nm and polydispersity index of 0.275. Cur-NLCs affected the creamy texture of self-standing Cur-NLCs-HPMC-OGs. The Cur-NLCs were tightly packed as oil droplets in the network of HPMC. However, a high viscosity of HPMC-4000 led to a greater ability to entrap and prevent droplet coalescence compared to a low viscosity of HPMC-400. NLCs promoted the release of free fatty acids during in vitro lipid digestion, whereas HPMC-4000 maintained the strength and durability of oleogels against mechanical and enzymatic breakdown. The in situ loop results revealed higher curcumin absorption by Cur-NLCs-HPMC-OGs than by Cur-HPMC-OGs. HMPC-4000 showed slightly higher curcumin absorption compared to HPMC-400.

Multifunctional poly(vinyl alcohol) films using cellulose nanocrystals/oregano and cellulose nanocrystals/cinnamon Pickering emulsions: Effect of oil type and concentration.

Poly (vinyl alcohol) (PVA) films with high transparency, UV-barrier, antioxidant, and antimicrobial properties were prepared using oregano essential oil (OEO) and cinnamon essential oil (CEO) Pickering emulsions. The effect of Pickering emulsion type and concentration on the PVA film properties was studied. Cellulose nanocrystals (CNCs) were used as a natural stabilizer to prepare OEO and CEO Pickering emulsions. Both emulsions showed spherical droplets with diameters of 155-291 nm, zeta potential of -36.2 to -49.6 mV, minimum inhibition concentration of 6.25-12.5 µL/mL, and inhibition zone of 40-65 mm, depending on oil type. Morphology and FTIR analysis showed that OEO and CEO Pickering emulsions were compatible with the PVA matrix. The UV-transmittance of PVA films decreased from 77.3% to 30.4% and 2.0% without sacrificing the transparency after adding OEO and CEO Pickering emulsions, respectively. Antimicrobial results showed that E. coli was more sensitive to CEO, while S. aureus was sensitive to OEO Pickering emulsion. PVA/CEO film displayed higher properties than PVA/OEO film.

Comparative Study of Chitosan and Oligochitosan Coatings on Mucoadhesion of Curcumin Nanosuspensions.

Curcumin nanosuspensions (Cur-NSs), chitosan-coated Cur-NSs (CS-Cur-NSs), and oligochitosan-coated Cur-NSs (OCS-Cur-NSs) were prepared by using an ultrasonic homogenization technique. The mean particle size of Cur-NSs was 210.9 nm and significantly (p < 0.05) increased to 368.8 nm by CS coating and decreased to 172.8 nm by OCS coating. Encapsulation efficiencies of Cur-NSs, CS-Cur-NSs, and OCS-Cur-NSs were 80.6%, 91.4%, and 88.5%, respectively. The mucin adsorption of Cur-NSs was steeply increased about 3-4 times by CS and OCS coating. Morphological changes of these NSs were studied using circular dichroism spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, and transmission electron microscopy (TEM). Thus, CS-Cur-NSs and OCS-Cur-NSs showed great potential as mucoadhesive nano-carriers for the efficient delivery of water insoluble compounds like curcumin to the gastrointestinal system.

Post-Processing Techniques for the Improvement of Liposome Stability.

Liposomes have been utilized as a drug delivery system to increase the bioavailability of drugs and to control the rate of drug release at the target site of action. However, the occurrence of self-aggregation, coalescence, flocculation and the precipitation of aqueous liposomes during formulation or storage can cause degradation of the vesicle structure, leading to the decomposition of liposomes. To increase the stability of liposomes, post-processing techniques have been applied as an additional process to liposomes after formulation to remove water and generate dry liposome particles with a higher stability and greater accessibility for drug administration in comparison with aqueous liposomes. This review covers the effect of these techniques including freeze drying, spray drying and spray freeze drying on the stability, physicochemical properties and drug encapsulation efficiency of dry liposomes. The parameters affecting the properties of liposomes during the drying process are also highlighted in this review. In addition, the impact of using a protective agent to overcome such limitations of each process is thoroughly discussed through various studies.