RESUMEN
Helix-coil transitions of poly α-aspartic acid (PASP) were studied by dc polarography in the presence of Zn(2+) as a marker attached to the polymer. The diffusion current (i(d)) of Zn(2+) declined markedly in the pH range of 3.5-7.4 due to a formation of metal ion-PASP macromolecular complexes. The complex formation also reflects on an increase of the magnitude at ca. 222 nm of CD spectrum, suggesting that PASP forms the helix structure by coordination of Zn(2+) in the corresponding pH region. Helix content, determined by the decrease in i(d) of Zn(2+), corresponds favorably to that by CD measurements. In the lower acidic pH region, the coordination mode of Zn(2+) to PASP is different from that at neutral pH region. The decrease in i(d) of Zn(2+) is independent of the further formation of helix structure. Zn(2+) coordinates with sparsely dissociated carboxylate groups of the helical part of PASP, which bring about an aggregation of polypeptide strands. The diffusion current of the ion attached to the polymer, therefore, is a parameter sensitive to conformational changes of PASP from acidic through neutral pH region.
Asunto(s)
Dicroismo Circular/métodos , Compuestos Organometálicos/análisis , Péptidos/química , Polarografía/métodos , Zinc/química , Cationes Bivalentes , Difusión , Concentración de Iones de Hidrógeno , Compuestos Organometálicos/química , Pliegue de Proteína , Estructura Secundaria de ProteínaRESUMEN
Sepiolite is a clay mineral with a fibrous morphology; the fibers possess rectangular channels along the fiber direction, and have cation-exchange ability. Amphiphilic octadecylammonium cations (ODAH(+)) spread at an interface between the air and a dispersion of sepiolite fibers have hybridized with the fibers to form a floating monolayer. Surface pressure-molecular area isotherms did not indicate clear collapse points of the hybrid monolayers. Observation of the hybrid films on glass plates by atomic force microscopy revealed that the sepiolite fibers preferred to be aligned perpendicularly to the compression direction, and that some fibers overlapped upon compression or even before compression. Out-of-plane and in-plane X-ray diffraction patterns of the hybrid film showed that the fibers were not only aligned by the compression but oriented around the fiber direction. Electronic spectra of methylene blue cations (MB(+)) adsorbed on the hybrid film indicated the presence of monomers and dimers of MB(+). The absorption intensity due to the monomer was dependent on the polarization direction of the incident beam; interestingly, the monomers were spontaneously oriented along the sepiolite fiber direction but the dimers were not oriented. By comparison with the results of rhodamine 6G adsorbed on the film, the monomers of MB(+) would probably be present in the channels of sepiolite fibers, while the dimers would be adsorbed on the external surface of the fibers.
RESUMEN
To analyze a curing process of epoxy resin in terms of molecular motion, we adapted a pulsed NMR method. Three kinds of (1)H spin-spin relaxation times (T(2L) (long), T(2S) (short) and T(2M) (intermediate)) were estimated from observed solid echo train signals as the curing process proceeded. A short T(2S) value below 20 micros suggests the existence of a motion-restricted chain, that is, cured elements of resin, and its fraction, P(S), sigmoidally increased with the curing time. On the other hand, the fraction of T(2L), P(L), decreased with the reaction time reciprocally against P(S), suggesting the disappearance of highly mobile molecules raised from pre-cured resin. The spin-lattice relaxation time, T(1), was also measured to check another aspect of molecular motion in the process. T(1) of the mixed epoxy resin and curing agent gradually increased just after mixing both of them. This corresponds to an increment of a less-mobile fraction, of which the correction time is more than 10(-6) s, and also means that the occurrence of a network structure whose mobility is strongly restricted by chemically bonded bridges between the epoxy resin and curing agent. The time courses of these parameters coincided with those of IR peaks pertinent to the curing reaction. Therefore, pulsed NMR is a useful tool to monitor the hardening process of epoxy resin in real time non-distractively in terms of the molecular motion of protons.
RESUMEN
The formation of inorganic-organic hybrid films of a titania nanosheet and an amphiphilic alkylammonium cation has been investigated, and the photocatalytic decomposition of the alkylammonium cation in the film has been pursued. When a solution of the amphiphilic alkylammonium salt (octadecylammonium chloride: ODAH+ Cl-) was spread on an interface between the air and a titania nanosheet suspension, the negatively charged nanosheets were adsorbed onto the floating monolayer of ODAH+ to form a hybrid monolayer. The hybridization was confirmed by pi-A isotherm measurements, atomic force microscopy, and X-ray photoelectron spectroscopy. Multilayered films were fabricated in a layer-by-layer way by transferring the hybrid monolayers onto glass plates. Areas per ODAH+ cation in the films were estimated from the infrared (IR) spectra of the films, but these areas were smaller than those estimated from the pi-A isotherm curves. The orientation of the alkyl chain of ODAH+ in the hybrid film was determined by means of polarized IR spectroscopy. The alkyl chains were tilted 41 +/- 1 degrees and 47 +/- 1 degrees from the surface normal for the films prepared from the 8 and 20 ppm (ppm = mg dm(-3)) suspensions, respectively. Together with X-ray diffraction data of the films, the structure of the hybrid film was discussed. When the films were illuminated with a UV light, the absorption intensities due to the alkyl chain of ODAH+ decreased exponentially, indicating the photocatalytic decomposition of ODAH+ by the titania nanosheets in the films. Deviation from the exponential trend in the decomposition rate was observed in the initial period for the hybrid films prepared from the suspensions at low concentrations. Interestingly, the layered structure of the hybrid film was disturbed significantly after the ODAH+ cations were decomposed.
RESUMEN
We have studied the formation of ultrathin hybrid films composed of a water-soluble alkylammonium cation (trimethyloctadecylammonium caiton: TMODAH+) and clay nanosheets at an air-water interface. When a chloroform solution of the ammonium salt of TMODAH+Cl- was spread onto a surface of an aqueous clay suspension in a Langmuir trough, a stable monolayer of the water-soluble ammonium cation was formed by hybridization with the clay nanosheets at the air-water interface. Surface pressure--molecular area (pi-A) isotherm curve of the hybrid monolayer shifted to the smaller molecular area side with the increase in the concentration of the ammonium salt in the solution or with the decrease in that of the clay in the suspension. In some cases, the lift-off areas in the pi-A isotherm curves were less than the cross-sectional area of an alkyl chain (ca. 0.19 nm2). These results indicated that some ammonium cations spread onto the clay suspension were dissolved into the aqueous subphase before the hybridization with the clay nanosheets. The hybrid monolayers were transferred onto a glass plate in a layer-by-layer way by horizontal dipping to form a hybrid multilayerd film. Interestingly, the densities of TMODAH+ determined by the infrared spectral analysis were constant in the hybrid multilayers prepared from the clay suspensions at the same concentration, regardless of the concentrations of the ammonium salt solutions. XRD patterns of the films showed that the cations of TMODAH+ would lie down on the clay layer in the hybrid film.
RESUMEN
An ordered structure of [OsL(3)](2+)(L = 2, 2'-bipyridine or 1, 10-phenanthroline) layer in an ultrathin film composed of the complex cations, clay nanosheets and alkylammonium cations is reported on the basis of its in-plane X-ray diffraction and polarized electronic spectral data.