Green algae Ulva lactuca-derived biochar-sulfur improves the adsorption of methylene blue from water.

The present investigation explores the efficacy of green algae Ulva lactuca biochar-sulfur (GABS) modified with H2SO4 and NaHCO3 in adsorbing methylene blue (MB) dye from aqueous solutions. The impact of solution pH, contact duration, GABS dosage, and initial MB dye concentration on the adsorption process are all methodically investigated in this work. To obtain a thorough understanding of the adsorption dynamics, the study makes use of several kinetic models, including pseudo-first order and pseudo-second order models, in addition to isotherm models like Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich. The findings of the study reveal that the adsorption capacity at equilibrium (qe) reaches 303.78 mg/g for a GABS dose of 0.5 g/L and an initial MB dye concentration of 200 mg/L. Notably, the Langmuir isotherm model consistently fits the experimental data across different GABS doses, suggesting homogeneous adsorption onto a monolayer surface. The potential of GABS as an efficient adsorbent for the extraction of MB dye from aqueous solutions is highlighted by this discovery. The study's use of kinetic and isotherm models provides a robust framework for understanding the intricacies of MB adsorption onto GABS. By elucidating the impact of various variables on the adsorption process, the research contributes valuable insights that can inform the design of efficient wastewater treatment solutions. The comprehensive analysis presented in this study serves as a solid foundation for further research and development in the field of adsorption-based water treatment technologies.

Thermodynamic, kinetic, and isotherm studies of Direct Blue 86 dye absorption by cellulose hydrogel.

In this study, cellulose hydrogels were simply fabricated by the chemical dissolution method using LiCl/dimethylacetamide as a new method, and the hydrogel produced was investigated for removing Direct Blue 86 (DB86) dye from the aquatic environment. The produced cellulose hydrogel (CAH) was characterized by FTIR, XRD, SEM, and TGA analyses. The removal efficiency of DB86 dye using CAH was achieved via a batch equilibrium process. The impact of pH, time of contact, CAH dosage, starting concentration of DB86 dye, and absorption temperature were scanned. The optimum pH for absorption of DB86 dye was determined to be 2. The absorption results obtained were scanned by Langmuir (LIM), Temkin (TIM), Freundlich (FIM), and Dubinin-Radushkevich (DRIM) isotherm models (IMs) and chi-square error (X2) function used to identify the best-fit IMs. The CAH had 53.76 mg/g as a maximum absorption capacity (Qm) calculated from the LIM plot. The TIM was the best fitted to the CAH absorption results. Kinetic absorption results were investigated by pseudo-first-order (PFOM), Elovich (EM), pseudo-second-order (PSOM), film diffusion (FDM), and intraparticle diffusion (IPDM) models. A PSOM with a high R2 (> 0.99) accounted for the majority of the control over the absorption rate. The findings indicate that CAH can potentially remove the DB86 dye from wastewater.