RESUMEN
INTRODUCTION: Helicobacter pylori causes stubborn infections and leads to a variety of stomach disorders, such as peptic ulcer, chronic atrophic gastritis, and gastric cancer. Although antibiotic-based approaches have been widely used against H. pylori, some challenges such as antibiotic resistance are increasing in severity. Therefore, simpler but more effective strategies are needed. AREAS COVERED: In this review, basic information on functionalized and non-functionalized micro/nano biomaterials and routes of administration for H. pylori inhibition are provided in an easy-to-understand format. Afterward, in vitro and in vivo studies of some promising bio-platforms including metal-based biomaterials, biopolymers, small-molecule saccharides, and vaccines for H. pylori inhibition are discussed in a holistic manner. EXPERT OPINION: Functionalized or non-functionalized micro/nano biomaterials loaded with anti-H. pylori agents can show efficient bactericidal activity with no/slight negative influence on the host gastrointestinal microbiota. However, this claim needs to be substantiated with hard data such as assessment of the biopharmaceutical parameters of anti-H. pylori systems and the measurement of diversity/abundance of bacterial genera in the host gastric/gut microbiota before and after H. pylori eradication.
RESUMEN
Using herpes simplex virus type 1 (HSV-1) as a therapeutic tool has recently emerged as a promising strategy for enhancing the treatment of various cancers, particularly those associated with the nervous system, which is the virus's natural site of infection. These viruses are specifically engineered to infect and eradicate tumor cells while leaving healthy cells unharmed. To introduce targeted mutations in specific viral genes, gene-modification techniques such as shuttle vector homologous recombination are commonly employed. Plaque purification is then utilized to select and purify the recombinant virus from the parental viruses. However, plaque purification becomes problematic when the insertion of the desired gene at the target site hampers progeny virus replication, resulting in a lower titer of cell-released virus than the parental virus. This necessitates a laborious initial screening process using approximately 10-15 tissue culture dishes (10 cm), making plaque purification time-consuming and demanding. Although the recently developed CRISPR-Cas9 system significantly enhances the efficiency of homologous integration and editing precision in viral genes, the purification of recombinant variants remains a tedious task. In this study, we propose a rapid and innovative method that employs non-permissive Chinese hamster ovary (CHO) cells, representing a remarkable improvement over the aforementioned arduous process. With this approach, only 1-2 rounds of plaque purification are required. Our proposed protocol demonstrates great potential as a viable alternative to current methods for isolating and purifying recombinant HSV-1 variants expressing fluorescent reporter genes using CHO cells and plaque assays.
RESUMEN
Introduction: Antibiotic resistance and weak bioavailability of antibiotics in the skin due to systemic administration leads to failure in eradication of vancomycin- and methicillin-resistant Staphylococcus aureus (VRSA and MRSA)-associated wound infections and subsequent septicemia and even death. Accordingly, this study aimed at designing a photocrosslinkable methacrylated chitosan (MECs) hydrogel coated by melittin-derived peptide 1 (MDP1) that integrated the antibacterial activity with the promising skin regenerative capacity of the hydrogel to eradicate bacteria by burst release strategy. Methods: The MECs was coated with MDP1 (MECs-MDP1), characterized, and the hydrogel-peptide interaction was evaluated by molecular docking. Antibacterial activities of MECs-MDP1 were evaluated against VRSA and MRSA bacteria and compared to MECs-vancomycin (MECs-vanco). Antibiofilm activity of MECs-MDP1 was studied by our novel 'in situ biofilm inhibition zone (IBIZ)' assay, and SEM. Biocompatibility with human dermal fibroblast cells (HDFs) was also evaluated. Results and Discussion: Molecular docking showed hydrogen bonds as the most interactions between MDP1 and MECs at a reasonable affinity. MECs-MDP1 eradicated the bacteria rapidly by burst release strategy whereas MECs-vanco failed to eradicate them at the same time intervals. Antibiofilm activity of MECs-MDP1 were also proved successfully. As a novel report, molecular docking analysis has demonstrated that MDP1 covers the structure of MECs and also binds to lysozyme with a reasonable affinity, which may explain the inhibition of lysozyme. MECs-MDP1 was also biocompatible with human dermal fibroblast skin cells, which indicates its safe future application. The antibacterial properties of a photocrosslinkable methacrylated chitosan-based hydrogel coated with MDP1 antimicrobial peptide were successfully proved against the most challenging antibiotic-resistant bacteria causing nosocomial wound infections; VRSA and MRSA. Molecular docking analysis revealed that MDP1 interacts with MECs mainly through hydrogen bonds with reasonable binding affinity. MECs-MDP1 hydrogels eradicated the planktonic state of bacteria by burst release of MDP1 in just a few hours whereas MECs-vanco failed to eradicate them. inhibition zone assay showed the anti-biofilm activity of the MECs-MDP1 hydrogel too. These findings emphasize that MECs-MDP1 hydrogel would be suggested as a biocompatible wound-dressing candidate with considerable and rapid antibacterial activities to prevent/eradicate VRSA/MRSA bacterial wound infections.
RESUMEN
BACKGROUND: Interleukin 2 (IL-2) is a vital cytokine in the induction of T and NK cell responses, the proliferation of CD8+ T cells, and the effective treatment of human cancers such as melanoma and renal cell carcinoma. However, widespread use of this cytokine is limited due to its short half-life, severe toxicity, lack of specific tumor targeting, and activation of Treg cells mediated by high-affinity interleukin-2 receptors. OBJECTIVE: In this study, a tumor-targeting LIV-1 VHH-mutIL2 immunocytokine with reduced CD25 (α chain of the high-affinity IL-2 receptor) binding activity was developed to improve IL-2 half-life by decreasing its renal infiltration in comparison with wild and mutant IL-2 molecules. METHODS: The recombinant immunocytokine was designed and expressed. The biological activity of the purified fusion protein was investigated in in vitro and in vivo experiments. RESULTS: The fusion protein represented specific binding to MCF7 (the breast cancer cell line) and more efficient cytotoxicity than wild-type IL-2 and mutant IL-2. The PK parameters of the recombinant immunocytokine were also improved in comparison to the IL-2 molecules. CONCLUSION: The observed results showed that LIV1-mIL2 immunocytokine could be considered as an effective agent in the LIV-1-targeted treatment of cancers due to its longer half-life and stronger cytotoxicity.
Asunto(s)
Antineoplásicos , Interleucina-2 , Humanos , Interleucina-2/metabolismo , Interleucina-2/inmunología , Animales , Antineoplásicos/farmacología , Antineoplásicos/química , Ratones , Femenino , Proteínas de Neoplasias/inmunología , Proteínas de Neoplasias/metabolismo , Proteínas de Neoplasias/genética , Proliferación Celular/efectos de los fármacos , Ensayos de Selección de Medicamentos Antitumorales , Células MCF-7 , Anticuerpos de Dominio Único/inmunología , Anticuerpos de Dominio Único/farmacología , Ratones Endogámicos BALB C , Proteínas Recombinantes de Fusión/farmacología , Proteínas Recombinantes de Fusión/genética , Proteínas Adaptadoras Transductoras de Señales , Proteínas Inhibidoras de la ApoptosisRESUMEN
Extracellular vesicles (EVs) are enclosed by a lipid-bilayer membrane and secreted by all types of cells. They are classified into three groups: apoptotic bodies, microvesicles, and exosomes. Exosomes play a number of important roles in the intercellular communication and crosstalk between tissues in the body. In this study, we use three common methods based on different principles for exosome isolation, namely ultrafiltration, precipitation, and ultracentrifugation. We use field emission scanning electron microscopy (FESEM) and dynamic light scattering (DLS) analyses for characterization of exosomes. The functionality and effect of isolated exosomes on the viability of hypoxic cells was investigated by alamarBlue and Flow-cytometry. The results of the FESEM study show that the ultrafiltration method isolates vesicles with higher variability of shapes and sizes when compared to the precipitation and ultracentrifugation methods. DLS results show that mean size of exosomes isolated by ultrafiltration, precipitation, and ultracentrifugation methods are 122, 89, and 60 nm respectively. AlamarBlue analysis show that isolated exosomes increase the viability of damaged cells by 11%, 15%, and 22%, respectively. Flow-cytometry analysis of damaged cells also show that these vesicles increase the content of live cells by 9%, 15%, and 20%, respectively. This study shows that exosomes isolated by the ultracentrifugation method are characterized by smaller size and narrow size distribution. Furthermore, more homogenous particles isolated by this method show increased efficiency of the protection of hypoxic cells in comparison with the exosomes isolated by the two other methods.
RESUMEN
The immunotherapeutic application of interleukin-2 (IL-2) in cancer treatment is limited by its off-target effects on different cell populations and insufficient activation of anti-tumor effector cells at the site of the tumor upon tolerated doses. Targeting IL-2 to the tumor microenvironment by generating antibody-cytokine fusion proteins (immunocytokine) would be a promising approach to increase efficacy without associated toxicity. In this study, a novel nanobody-based immunocytokine is developed by the fusion of a mutant (m) IL-2 with a decreased affinity toward CD25 to an anti-vascular endothelial growth factor receptor-2 (VEGFR2) specific nanobody, denoted as VGRmIL2-IC. The antigen binding, cell proliferation, IFN-γ-secretion, and cytotoxicity of this new immunocytokine are evaluated and compared to mIL-2 alone. Furthermore, the pharmacokinetic properties are analyzed. Flow cytometry analysis shows that the VGRmIL2-IC molecule can selectively target VEGFR2-positive cells. The results reveal that the immunocytokine is comparable to mIL-2 alone in the stimulation of Primary Peripheral Blood Mononuclear Cells (PBMCs) and cytotoxicity in in vitro conditions. In vivo studies demonstrate improved pharmacokinetic properties of VGRmIL2-IC in comparison to the wild or mutant IL-2 proteins. The results presented here suggest VGRmIL2-IC could be considered a candidate for the treatment of VEGFR2-positive tumors.
RESUMEN
Developing cost-effective, biocompatible scaffolds with nano-structured surface that truthfully replicate the physico-(bio)chemical and structural properties of bone tissue's extracellular matrix (ECM) is still challenging. In this regard, surface functionalization of natural scaffolds to enhance capability of mimicking 3D niches of the bone tissue has been suggested as a solution. In the current study, we aimed to investigate the potential of chitin-based cockroach wings (CW) as a natural scaffold for bone tissue engineering. To raise the osteogenic differentiation capacity of such a scaffold, a quercetin coating was also applied (hereafter this scaffold is referred as QCW). Moreover, the QCW scaffold exhibited effective antibacterial properties against gram-positive S. aureus bacteria. With respect to bone regeneration, the QCW scaffold optimally induced the differentiation of adipose-derived human mesenchymal stem cells (AD-hMSCs) into osteoblasts, as validated by mineralization assays, alkaline phosphatase (ALP) activity measurements, expression of pre-osteocyte marker genes, and immunocytochemical staining. Confirmation of the potent biocompatibility and physicochemical characteristics of the QCW scaffold through a series of in vitro and in vivo analysis revealed that surface modification had significant effect on multi-purpose features of obtained scaffold. Altogether, surface modification of QCW made it as an affordable bioinspired scaffold for bone tissue engineering.
Asunto(s)
Cucarachas , Osteogénesis , Animales , Humanos , Andamios del Tejido/química , Quercetina/farmacología , Quitina/farmacología , Staphylococcus aureus , Ingeniería de Tejidos/métodos , Regeneración Ósea , Diferenciación CelularRESUMEN
Helicobacter pylori (H. pylori) is a recalcitrant pathogen, which can cause gastric disorders. During the past decades, polypharmacy-based regimens, such as triple and quadruple therapies have been widely used against H. pylori. However, polyantibiotic therapies can disturb the host gastric/gut microbiota and lead to antibiotic resistance. Thus, simpler but more effective approaches should be developed. Here, some recent advances in nanostructured drug delivery systems to treat H. pylori infection are summarized. Also, for the first time, a drug release paradigm is proposed to prevent H. pylori antibiotic resistance along with an IVIVC model in order to connect the drug release profile with a reduction in bacterial colony counts. Then, local delivery systems including mucoadhesive, mucopenetrating, and cytoadhesive nanobiomaterials are discussed in the battle against H. pylori infection. Afterward, engineered delivery platforms including polymer-coated nanoemulsions and polymer-coated nanoliposomes are poposed. These bioinspired platforms can contain an antimicrobial agent enclosed within smart multifunctional nanoformulations. These bioplatforms can prevent the development of antibiotic resistance, as well as specifically killing H. pylori with no or only slight negative effects on the host gastrointestinal microbiota. Finally, the essential checkpoints that should be passed to confirm the potential effectiveness of anti-H. pylori nanosystems are discussed.
Asunto(s)
Infecciones por Helicobacter , Helicobacter pylori , Humanos , Infecciones por Helicobacter/tratamiento farmacológico , Infecciones por Helicobacter/microbiología , Antibacterianos/farmacología , Antibacterianos/uso terapéutico , Farmacorresistencia Bacteriana , Quimioterapia Combinada , Nanotecnología , Polímeros/farmacologíaRESUMEN
The gene delivery approach, mainly microRNAs (miRNA) as key wound healing mediators, has recently received extensive attention. MicroRNA-21 (miR-21) has strongly impacted wound healing by affecting the inflammation and proliferation phases. Previous studies have also demonstrated the beneficial effect of simvastatin on wound healing. Therefore, we designed a dual-drug/gene delivery system using PEGylated liposomes that could simultaneously attain the co-encapsulation and co-delivery of miRNA and simvastatin (SIM) to explore the combined effect of this dual-drug delivery system on wound healing. The PEG-liposomes for simvastatin and miR-21 plasmid (miR-21-P/SIM/Liposomes) were prepared using the thin-film hydration method. The liposomes showed 85 % entrapment efficiency for SIM in the lipid bilayer and high physical entrapment of miR-21-P in the inner cavity. In vitro studies demonstrated no cytotoxicity for the carrier on normal human dermal fibroblast cells (NHDF) and 97 % cellular uptake over 2 h incubation. The scratch test revealed excellent cell proliferation and migration after treatment with miR-21-P/SIM/Liposomes. For the in vivo experiments, a full-thickness cutaneous wound model was used. The wound closure on day 8 was higher for Liposomal formulation containing miR-21-P promoting faster re-epithelialization. On day 12, all treated groups showed complete wound closure. However, following histological analysis, the miR-21-P/SIM/Liposomes revealed the best tissue regeneration, similar to normal functional skin, by reduced inflammation and increased re-epithelialization, collagen deposition and angiogenesis. In conclusion, the designed miR-21-P/SIM/Liposomes could significantly accelerate the process of wound healing, which provides a new strategy for the management of chronic wounds.
Asunto(s)
Liposomas , MicroARNs , Humanos , Simvastatina/farmacología , Cicatrización de Heridas/genética , MicroARNs/genética , InflamaciónRESUMEN
Oncolytic viruses (OVs) have emerged as a novel cancer treatment modality, which selectively target and kill cancer cells while sparing normal ones. Among them, engineered Herpes simplex virus type 1 (HSV-1) has been proposed as a potential treatment for cancer and was moved to phase III clinical trials. Previous studies showed that design of OV therapy combined with p53 gene therapy increases the anti-cancer activities of OVs. Here, the UL39 gene of the ICP34.5 deleted HSV-1 was manipulated with the insertion of the EGFP-p53 expression cassette utilizing CRISPR/ Cas9 editing approach to enhance oncoselectivity and oncotoxicity capabilities. The ΔUL39/Δγ34.5/HSV1-p53 mutant was isolated using the chorioallantoic membrane (CAM) of fertilized chicken eggs as a complementing membrane to support the growth of the viruses with gene deficiencies. Comparing phenotypic features of ΔUL39/Δγ34.5/HSV1-p53-infected cells with the parent Δγ34.5/HSV-1 in vitro revealed that HSV-1-P53 had cytolytic ability in various cell lines from different origin with different p53 expression rates. Altogether, data presented here illustrate the feasibility of exploiting CAM model as a promising strategy for isolating recombinant viruses such as CRISPR/Cas9 mediated HSV-1-P53 mutant with less virus replication in cell lines due to increased cell mortality induced by exogenous p53.
Asunto(s)
Herpesvirus Humano 1 , Neoplasias , Virus Oncolíticos , Animales , Herpesvirus Humano 1/genética , Herpesvirus Humano 1/metabolismo , Sistemas CRISPR-Cas , Pollos/metabolismo , Proteína p53 Supresora de Tumor/genética , Proteína p53 Supresora de Tumor/metabolismo , Membrana Corioalantoides/metabolismo , Neoplasias/genética , Neoplasias/terapia , Virus Oncolíticos/genéticaAsunto(s)
Neoplasias , Anticuerpos de Dominio Único , Humanos , Anticuerpos Monoclonales , Inmunoterapia , Neoplasias/terapiaRESUMEN
Zeolitic imidazolate frameworks (ZIFs), as a very well-known subset of metal-organic frameworks (MOFs), have attracted considerable attention in biomedicine due to their unique structural features such as tunable pore size, high surface area, high thermal stability, biodegradability, and biocompatibility. Moreover, it is possible to load a wide variety of therapeutic agents, drugs, and biomolecules into ZIF structures during the fabrication process owing to the ZIFs' porous structure and concise synthesis methods under mild conditions. This review focuses on the most recent advances in the bioinspiration of ZIFs and ZIF-integrated nanocomposites in boosting antibacterial efficiencies and regenerative medicine capabilities. The first part summarizes the various synthesis routes and physicochemical properties of ZIFs, including size, morphology, surface, and pore size. The recent advancements in the antibacterial aspects of using ZIFs and ZIF-integrated nanocomposites as carriers for antibacterial agents and drug cargo are elaborated. Moreover, the antibacterial mechanisms based on the factors affecting the antibacterial properties of ZIFs such as oxidative stress, internal and external triggers, the effect of metal ions, and their associated combined therapies, are discussed. The recent trends of ZIFs and their composites in tissue regeneration, especially bone regeneration and wound healing, are also reviewed with in-depth perspectives. Finally, the biological safety aspects of ZIFs, the latest reports about their toxicity, and the future prospects of these materials in regenerative medicine have been discussed.
Asunto(s)
Estructuras Metalorgánicas , Zeolitas , Imidazoles/farmacología , Imidazoles/química , Estructuras Metalorgánicas/química , Cicatrización de HeridasRESUMEN
Background: Despite recent advances in recombinant biotherapeutics production using CHO cells, their productivity remains lower than industrial needs, mainly due to apoptosis. Objectives: Present study aimed to exploit CRISPR/Cas9 technology to specifically disrupt the BAX gene to attenuate apoptosis in recombinant Chinese hamster's ovary cells producing erythropoietin. Materials and Methods: The STRING database was used to identify the key pro-apoptotic genes to be modified by CRISPR/Cas9 technique. The single guide RNAs (sgRNAs) targeting identified gene (BAX) were designed, and CHO cells were then transfected with vectors. Afterward, changes in the expression of the Bax gene and consequent production rates of erythropoietin were investigated in manipulated cells, even in the presence of an apoptosis inducer agent, oleuropein. Results: BAX disruption significantly prolonged cell viability and increased proliferation rate in manipulated clones (152%, P-value = 0.0002). This strategy reduced the levels of Bax protein expression in manipulated cells by more than 4.3-fold (P-value <0.0001). The Bax-8 manipulated cells displayed higher threshold tolerance to the stress and consequence apoptosis compared to the control group. Also, they exhibited a higher IC50 compared to the control in the presence of oleuropein (5095 µM.ml-1 Vs. 2505 µM.ml-1). We found a significant increase in recombinant protein production levels in manipulated cells, even in the presence of 1,000 µM oleuropein compared to the control cell line (p-value=0.0002). Conclusions: CRISPR/Cas9 assisted BAX gene ablation is promising to improve erythropoietin production in CHO cells via engineering anti-apoptotic genes. Therefore, exploiting genome editing tools such as CRISPR/Cas9 has been proposed to develop host cells that result in a safe, feasible, and robust manufacturing operation with a yield that meets the industrial requirements.
RESUMEN
BACKGROUND: Enhancing the efficiency of cell-based skin tissue engineering (TE) approaches is possible via designing electrospun scaffolds possessing natural materials like amniotic membrane (AM) with wound healing characteristics. Concentrating on this aim, we fabricated innovative polycaprolactone (PCL)/AM scaffolds through the electrospinning process. METHODS: The manufactured structures were characterized by employing scanning electron microscope (SEM), attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, tensile testing, Bradford protein assay, etc. In addition, the mechanical properties of scaffolds were simulated by the multiscale modeling method. RESULTS: As a result of conducting various tests, it was concluded that the uniformity and distribution of fibers decreased with an increase in the amniotic content. Furthermore, PCL-AM scaffolds contained amniotic and PCL characteristic bands. In the case of protein release, greater content of AM led to the release of higher amounts of collagen. Tensile testing revealed that scaffolds' ultimate strength increased when the AM content augmented. The multiscale modeling demonstrated that the scaffold had elastoplastic behavior. In order to assess cellular attachment, viability, and differentiation, human adipose-derived stem cells (ASCs) were seeded on the scaffolds. In this regard, SEM and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assays showed significant cellular proliferation and viability on the proposed scaffolds, and these analyses illustrated that higher cell survival and adhesion could be achieved when scaffolds possessed a larger amount of AM. After 21 days of cultivation, particular keratinocyte markers, such as keratin I and involucrin, were identified through utilizing immunofluorescence and real-time polymerase chain reaction (PCR) tests. The markers' expressions were higher in the PCL-AM scaffold with a ratio of 90:10 v v-1 compared with the PCL-epidermal growth factor (EGF) structure. Moreover, the presence of AM in the scaffolds resulted in the keratinogenic differentiation of ASCs even without employing EGF. Consequently, this state-of-the-art experiment suggests that the PCL-AM scaffold can be a promising candidate in skin bioengineering. CONCLUSION: This study showed that mixing AM with PCL, a widely used polymer, in different concentrations can overcome PCL disadvantages such as high hydrophobicity and low cellular compatibility.
Asunto(s)
Nanofibras , Andamios del Tejido , Humanos , Andamios del Tejido/química , Factor de Crecimiento Epidérmico , Nanofibras/química , Amnios , Cicatrización de Heridas , Ingeniería de Tejidos/métodos , Poliésteres/química , Proliferación CelularRESUMEN
Decellularization by chemical approaches has harmful effects on extracellular matrix (ECM) proteins, and damages lots of functional peptides and biomolecules present in the ultrastructure. In this study, we employed a combination of chemical and physical decellularization methods to overcome these disadvantages. The induced osmotic pressure by hypertonic/hypotonic solutions dissociated and removed most of cellular membranes significantly without any detergent or chemical agent. In total, 0.025% trypsin solution was found adequate to remove the remaining debrides, and ultimately 1% Triton X-100 was utilized for final cleansing. In addition, conducting all the decellularization processes at 4 °C yielded an ECM with least damages in the ultrastructure which could be inferred by close mechanical strength and swelling ratio to the native vessel, and high quality and quantity of cell attachment, migration and proliferation which were examined by optical microscopy and scanning electron microscopy (SEM) of the histology samples. Moreover, the obtained biological scaffold (BS) had no cytotoxicity according to the MTT assay, and this scaffold is storable at -20 °C. Employing bioreactor for concurrent cyclic tensile and shear stresses improved the cell migration into pores of the BS and made the cells and the scaffold compact in analogous to native tissue. As opening angle test showed by decellularizing of the blood vessel, the residual stress dropped significantly which revealed the role of cells in the amount of induced stress in the structure. However, intact and healthy ECM explicitly recovered upon recellularization and beat the initial residual stress of the native tissue. The tensile test of the blood vessels in longitudinal and radial directions revealed orthotropic behavior which can be explained by collagen fibers direction in the ECM. Furthermore, by the three regions of the stress-strain curve can be elucidated the roles of cells, elastin and collagen fibers in mechanical behavior of the vascular tissues.
Asunto(s)
Matriz Extracelular , Ingeniería de Tejidos , Ingeniería de Tejidos/métodos , Matriz Extracelular/metabolismo , Biomimética , Octoxinol/química , Colágeno/química , Andamios del Tejido/químicaRESUMEN
In the development of vascular tissue engineering, particularly in the case of small diameter vessels, one of the key obstacles is the blockage of these veins once they enter the in vivo environment. One of the contributing factors to this problem is the aberrant proliferation and migration of vascular smooth muscle cells (VSMCs) from the media layer of the artery to the interior of the channel. Two distinct phenotypes have been identified for smooth muscle cells, namely synthetic and contractile. Since the synthetic phenotype plays an essential role in the unusual growth and migration, the aim of this study was to convert the synthetic phenotype into the contractile one, which is a solution to prevent the abnormal growth of VSMCs. To achieve this goal, these cells were subjected to electrical signals, using a 1000 µA sinusoidal stimulation at 10 Hz for four days, with 20 min duration per 24 h. The morphological transformations and changes in the expression of vimentin, nestin, and ß-actin proteins were then studied using ICC and flow cytometry assays. Also, the expression of VSMC specific markers such as smooth muscle myosin heavy chain (SMMHC) and smooth muscle alpha-actin (α-SMA) were evaluated using RT-PCR test. In the final phase of this study, the sheep decellularized vessel was employed as a scaffold for seeding these cells. Based on the results, electrical stimulation resulted in some morphological alterations in VSMCs. Furthermore, the observed reductions in the expression levels of vimentin, nestin and ß-actin proteins and increase in the expression of SMMHC and α-SMA markers showed that it is possible to convert the synthetic phenotype to the contractile one using the studied regime of electrical stimulation. Finally, it can be concluded that electrical stimulation can significantly affect the phenotype of VSMCs, as demonstrated in this study.
Asunto(s)
Actinas , Músculo Liso Vascular , Animales , Ovinos , Músculo Liso Vascular/metabolismo , Actinas/metabolismo , Nestina , Vimentina/metabolismo , Diferenciación Celular/fisiología , Fenotipo , Estimulación Eléctrica , Células Cultivadas , Proliferación CelularRESUMEN
Keratinocyte growth factor (KGF) is a potential therapeutic factor in wound healing. However, its applications have been restricted due to its low stability, short half-life, and limited target specificity. We aimed to immobilize KGF on collagen-based biomaterials for long-lasting and targeted therapy by designing fusion forms of KGF with collagen-binding domains (CBD) from natural origins. Twelve fusion proteins were designed consisting of KGF and CBDs with different lengths and amino acid compositions. Three-dimensional (3D) structures of the fusions were predicted by homology modeling. Physiochemical properties and secondary structure of the fusions were evaluated by bioinformatics tools. Moreover, the effect of the CBDs on the 3D structure and dynamic behavior of the fusions was investigated by molecular dynamics (MD) simulation. The binding affinity of the fusions to collagen, KGF receptor, and heparin was assessed using docking tools. Our results demonstrated that fusions with small CBDs like CBD of mammalian collagenase and decapeptide CBD of von Willebrand factor (VWF) were more stable and properly folded than those with larger CBDs. On the other hand, the insertion of bulky CBDs, including Fibronectin CBD and CBD of Clostridium histolyticum collagenase, into KGF resulted in stronger binding to collagen. Therefore, very small or large CBDs are inappropriate for constructing KGF fusions because they suffer from low collagen affinity or poor stability. By comparing the results of MD simulation and docking, this study proposed that CBDs belonging to Vibrio mimicus metalloprotease and A3 domain of VWF would be good candidates to produce stable fusions with proper affinities toward collagen and KGF receptors. Moreover, the secondary structure analysis showed that the overall structure of KGF and CBDs was better preserved when CBDs were inserted at the C-terminal of KGF. This computational information about novel KGF fusions may help find the best constructs for experimental studies.
Asunto(s)
Factor 7 de Crecimiento de Fibroblastos , Ingeniería de Tejidos , Animales , Factor de von Willebrand , Colagenasa Microbiana/química , Colagenasa Microbiana/metabolismo , Colágeno/química , Colágeno/metabolismo , Mamíferos/metabolismoRESUMEN
Direct neuronal reprogramming of somatic cells into induced neurons (iNs) has been recently established as a promising approach to generating neuron cells. Previous studies have reported that the biophysical cues of the in vitro microenvironment are potent modulators in the cell fate decision; thus, the present study explores the effects of a customized pattern (named colloidal self-assembled patterns, cSAPs) on iN generation from human fibroblasts using small molecules. The result revealed that the cSAP, composed of binary particles in a hexagonal-close-packed (hcp) geometry, is capable of improving neuronal reprogramming efficiency and steering the ratio of the iN subtypes. Cells exhibited distinct cell morphology, upregulated cell adhesion markers (i.e., SDC1 and ITGAV), enriched signaling pathways (i.e., Hippo and Wnt), and chromatin remodeling on the cSAP compared to those on the control substrates. The result also showed that the iN subtype specification on cSAP was surface-dependent; therefore, the defined physicochemical cue from each cSAP is exclusive. Our findings show that direct cell reprogramming can be manipulated through specific biophysical cues on the artificial matrix, which is significant in cell transdifferentiation and lineage conversion.
RESUMEN
Objectives: Bioglass scaffolds, which contain a significant percentage of porosity for tissue engineering purposes, have low strength. For increasing the strength and efficiency of such structures for use in tissue engineering, fabrication of hierarchical meso/macro-porous bioglass scaffolds, developing their mechanical strength by hydrothermal treatment and adjusting pH method, and achieving the appropriate mesopore size for loading large biomolecules, were considered in this study. Materials and Methods: Mesoporous bioglass (MBG) powders were synthesized using cetyltrimethylammonium bromide as a surfactant, with different amounts of calcium sources to obtain the appropriate size of the mesoporous scaffolds. Then MBG scaffolds were fabricated by a polyurethane foam templating method, and for increasing scaffold strength hydrothermal treatment (90 °C, for 5 days) and adjustment pH (pH=9) method was used to obtain hierarchical meso/macro-porous structures. The sample characterization was done by Simultaneous thermal analysis, Fourier transform infrared spectroscopy, Field Emission Scanning electron microscopy, small and wide-angle X-ray powder diffractions, transmission electron microscopy, and analysis of nitrogen adsorption-desorption isotherm. The mechanical strength of scaffolds was also determined. Results: The MBG scaffolds based on 80.28 (wt.) % SiO2- 17.89 (wt.) % CaO- 1.81 (wt.) % P2O5 presented interconnected large pores and pores in the range of 100-150 µm and 6-18 nm, respectively and 0.4 MPa compressive strength. Conclusion: The total pore volume and specific surface area were obtained from the Brunauer-Emmett-Teller theory, 0.709 cm3 g-1 and 213.83 m2 g-1, respectively. These findings could be considered in bone-cartilage tissue engineering.
RESUMEN
Gastric cancer is a common malignancy that is the second cancer-associated mortality worldwide. This study aimed to develop a pH-sensitive drug delivery system including hollow mesoporous silica nanoparticles (HMSNs) loaded with gefitinib (GB) and encapsulated with mussel-inspired polydopamine (PDA) (HMSNs-GB-PDA) for the treatment of gastric cancer; where the HMSNs mainly function as drug storage platforms, and GB interrupts signaling through the epidermal growth factor receptor (EGFR) in cancer cells. In addition, PDA was used as an anticancer factor, mucoadhesive enhancing agent, stimuli, and gatekeeper to mediate the GB release. The drug delivery kinetics (in vitro), mucoadhesive properties (ex vivo), and cytocompatibility in both healthy (HGF) and gastric cancer (AGS) cell lines of this formulation were also investigated. The results showed that HMSNs-GB-PDA not only selectively killed AGS cells but also had no toxic effect on HGF cells, in such a way that more than 70% of AGS cells were eliminated at a GB concentration of 150 ug/ml, whereas only about 15% of HGF cells were killed at the same concentration. In addition, the PDA coating served as a gatekeeper, inhibited burst release, and resulted in a sustained release that lasted for a long time. The ex vivo mucoadhesiveness evaluation revealed the high mucoadhesive property (93.88%) of PDA-coated nanocarriers. According to the results, the suggested HMSNs-GB-PDA could potentially be used to treat gastric cancer.