Ultrasensitive PD-L1-Expressing Exosome Immunosensors Based on a Chemiluminescent Nickel-Cobalt Hydroxide Nanoflower for Diagnosis and Classification of Lung Adenocarcinoma.

Programmed death ligand-1 (PD-L1)-expressing exosomes are considered a potential marker for diagnosis and classification of lung adenocarcinoma (LUAD). There is an urgent need to develop highly sensitive and accurate chemiluminescence (CL) immunosensors for the detection of PD-L1-expressing exosomes. Herein, N-(4-aminobutyl)-N-ethylisopropanol-functionalized nickel-cobalt hydroxide (NiCo-DH-AA) with a hollow nanoflower structure as a highly efficient CL nanoprobe was synthesized using gold nanoparticles as a "bridge". The resulting NiCo-DH-AA exhibited a strong and stable CL emission, which was ascribed to the exceptional catalytic capability and large specific surface area of NiCo-DH, along with the capacity of AuNPs to facilitate free radical generation. On this basis, an ultrasensitive sandwich CL immunosensor for the detection of PD-L1-expressing exosomes was constructed by using PD-L1 antibody-modified NiCo-DH-AA as an effective signal probe and rabbit anti-CD63 protein polyclonal antibody-modified carboxylated magnetic bead as a capture platform. The immunosensor demonstrated outstanding analytical performance with a wide detection range of 4.75 × 103-4.75 × 108 particles/mL and a low detection limit of 7.76 × 102 particles/mL, which was over 2 orders of magnitude lower than the reported CL method for detecting PD-L1-expressing exosomes. Importantly, it was able to differentiate well not only between healthy persons and LUAD patients (100% specificity and 87.5% sensitivity) but also between patients with minimally invasive adenocarcinoma and invasive adenocarcinoma (92.3% specificity and 52.6% sensitivity). Therefore, this study not only presents an ultrasensitive and accurate diagnostic method for LUAD but also offers a novel, simple, and noninvasive approach for the classification of LUAD.

N-(4-Aminobutyl)-N-ethylisopropanol and Co2+ Dual-Functionalized Core-Shell Fe3O4@Au/Ag Magnetic Nanomaterials with Strong and Stable Chemiluminescence for a Label-Free Exosome Immunosensor.

Recently, magnetic beads (MBs) are moving toward chemiluminescence (CL) functional magnetic nanomaterials with a great potential for constructing label-free immunosensors. However, most of the CL-functionalized MBs suffer from scarce binding sites, easy aggregation, and leakage of CL reagents, which will ultimately affect the analytical performance of immunosensors. Herein, by using core-shell Fe3O4@Au/Ag magnetic nanomaterials as a nanoplatform, a novel N-(4-aminobutyl)-N-ethylisopropanol (ABEI) and Co2+ dual-functionalized magnetic nanomaterial, namely, Fe3O4@Au/Ag/ABEI/Co2+, with strong and stable CL emission was successfully synthesized. Its CL intensity was 36 and 3.5 times higher than that of MB@ABEI-Au/Co2+ and ABEI and Co2+ dual-functionalized chemiluminescent MBs previously reported by our group, respectively. It was found that the excellent CL performance of Fe3O4@Au/Ag/ABEI/Co2+ could be attributed to the enrichment effect of the Au/Ag shell and the synergistic enhance effect of the Au/Ag shell and Co2+. A related CL mechanism has been proposed. Afterward, based on the intense and stable CL emission of Fe3O4@Au/Ag/ABEI/Co2+, a sensitive and effective label-free CL immunosensor for exosome detection was established. It exhibited excellent analytical performance with a wide detection range of 3.1 × 103 to 3.1 × 108 particles/mL and a low detection limit of 2.1 × 103 particles/mL, which were better than the vast majority of the reported CL immunosensors. Moreover, the proposed label-free CL immunosensor was successfully used to detect exosomes in human serum samples and enabled us to distinguish healthy persons and lung cancer patients. It has the potential to be a powerful tool for exosome study and early cancer diagnosis.

Emission Onset Time-Adjustable Chemiluminescent Gold Nanoparticles with Ultrastrong Emission for Smartphone-Based Immunoassay of Severe Acute Respiratory Syndrome Coronavirus 2 Antigen.

Recently, our group reported a chemical timer approach to manipulate the onset time of chemiluminescence (CL) emission. However, it is still in the proof-of-concept stage, and its analytical applications have not been explored yet. Nanomaterials have merits of good catalytic effect, large specific surface area, good biocompatibility, and ease of self-assembly, which are ideal for constructing analytical-interfaces for bioassays. Herein, an emission onset time-adjustable chemiluminescent L012-Au/Mn2+ was synthesized for the first time by modifying Mn2+ on the surface of L012-protected gold nanoparticle. By using H2O2 and NaHCO3 as coreactants, L012-Au/Mn2+ could not only generate an ultrastrong and long-time CL emission but also its CL emission onset time could be adjusted by the addition of thiourea, which could effectively eliminate interference from the addition of coreactants, shorten the exposure time, reduce the detection background, and finally achieve high sensitivity CL imaging analysis. On this basis, a label-free CL immunoassay was constructed with a smartphone-based imaging system for high-throughput and sensitive determination of severe acute respiratory syndrome coronavirus 2 nucleocapsid (N) protein. The CL image of the immunoassay with different concentrations of N proteins was captured in one photograph 100 s after the injection of H2O2 with a short exposure time of 0.5 s. The immunoassay showed good linearity over the concentration range of 1 pg/mL to 10 ng/mL with a detection limit of 0.13 pg/mL, which was much lower than the reported CCD imaging detection method. In addition, it showed good selectivity and stability and was successfully applied in serum samples from healthy individuals and COVID-19 rehabilitation patients.

Three-Biomarker Joint Strategy for Early and Accurate Diagnosis of Acute Myocardial Infarction via a Multiplex Electrochemiluminescence Immunoarray Coupled with Robust Machine Learning.

Acute myocardial infarction (AMI) represents a leading cause of death globally. Key to AMI recovery is timely diagnosis and initiation of treatment, ideally within 3 h of symptom onset. Cardiac troponin T (cTnT) is the gold standard yet a low cTnT result cannot rule out AMI at early times. Here, we develop a three-biomarker joint strategy for early and accurate diagnosis of AMI via an electrochemiluminescence (ECL) immunoarray coupled with robust machine learning. The ECL immunoarray is based on an array microchip with a single-electrode and chemiluminescent immuno-Gold (ciGold) nanoassemblies. The ciGold immunoarray was obtained by successively assembling nanocomposites of Cu2+/cysteine complexes and N-(aminobutyl)-N-(ethylisoluminol) bifunctionalized gold nanoparticles combined with chitosan and antibody conjugated gold nanoparticles on the surface of a microchip. Three biomarkers, including cardiac troponin I, heart type fatty acid binding protein, and copeptin, were simultaneously detected in 260 serum samples from patients presenting with chest pain by an innovative multiplexed ECL immunoarray, and classified via the three-biomarker joint assessment model using support vector machines. The model achieved perfect discrimination (100% sensitivity and specificity) for AMI vs non-AMI patients, substantially higher than cTnT alone. Within 12 h of symptom onset, high-sensitivity cardiac troponin T (hs-cTnT) misclassified >20% of patients, while the joint biomarker assessment model retained perfect accuracy. As the time between symptom onset and testing became shorter, the degree to which the joint assessment model outperformed hs-cTnT increased. The proposed three-biomarker joint strategy is obviously superior to hs-cTnT for early and accurate diagnosis of AMI, hopefully reducing AMI mortality and saving limited medical resources.

Charge-Dependent Signal Changes for Label-Free Electrochemiluminescence Immunoassays.

Label-free electrochemiluminescence (ECL) immunoassays (lf-ECLIA), based on biomarker-induced ECL signal changes, have attracted increasing attention due to the simple, rapid, and low-cost detection of biomarkers without secondary antibodies and complicated labeling procedures. However, the interaction rule and mechanism between analytical interfaces and biomarkers have rarely been explored. Herein, the interactions between biomarkers and analytical interfaces constructed by assembly of a nanoluminophore and antibody-functionalized gold nanoparticles on an indium tin oxide electrode were studied. The nanoluminophore was synthesized by mixing Cu2+/l-cysteine chelate and N-(4-Aminobutyl)-N-ethylisoluminol-bifunctionalized gold nanoparticles with chitosan. It was found that positively charged biomarkers increased the ECL intensity, whereas negatively charged biomarkers decreased the ECL intensity. The assembly pH influenced the biomarker charges, which determined the ECL enhancement or inhibition. The detection pH only affected the ECL intensity but not the ECL changing trends. Based on the ECL signal changes, a charge-dependent lf-ECLIA was established, which exhibited inhibition responses to negatively charged human immunoglobulin G and copeptin and enhancement responses to positively charged cardiac troponin I, heart-type fatty acid binding protein, brain natriuretic peptide, and SARS-CoV-2 N protein. The linear range was 0.1-1000 pg/mL, and the detection limits were distributed in 0.024-0.091 pg/mL. Besides, a mechanism of the charge-dependent ECL enhancement and inhibition effects is proposed, which is very important for the development of new lf-ECLIA methodologies.

Chemiluminescent Nanogels as Intensive and Stable Signal Probes for Fast Immunoassay of SARS-CoV-2 Nucleocapsid Protein.

It is highly desired to exploit good nanomaterials as nanocarriers for immobilizing chemiluminescence (CL) reagents, catalysts and antibodies to develop signal probes with intensive and stable CL properties for immunoassays. In this work, N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and Co2+ bifunctionalized polymethylacrylic acid nanogels (PMAANGs-ABEI/Co2+) were synthesized via a facile strategy by utilizing carboxyl group-rich PMAANGs as nanocarriers to immobilize ABEI and Co2+. The obtained PMAANGs-ABEI/Co2+ showed extraordinary CL performance. The CL intensity is 2 orders of magnitude higher than that of previously reported ABEI and Cu2+-cysteine complex bifunctionalized gold nanoparticles with high CL efficiency. This was attributed to the excellent catalytic ability of Co2+ and polymethylacrylic acid nanogels, as well as the improved CL catalytic efficiency from a decreased spatial distance between ABEI and the catalyst. The as-prepared nanogels also possess abundant surface reaction sites and good CL stability. On this basis, a sandwich immunoassay for the nucleocapsid protein of SARS-CoV-2 (N protein) was developed by using magnetic bead connected primary antibody as a capture probe and PMAANGs-ABEI/Co2+ connected secondary antibody as a signal probe. The linear range of the proposed method for N protein detection was 3.16-316 ng/mL, and its detection limit was 2.19 ng/mL (S/N = 3). Moreover, the developed immunoassay was performed with a short incubation time of 5 min, which greatly reduced the detection time for N protein. By using corresponding antibodies, the developed strategy might be applied to detect other biomarkers.

A chemical timer approach to delayed chemiluminescence.

Although the onset time of chemical reactions can be manipulated by mechanical, electrical, and optical methods, its chemical control remains highly challenging. Herein, we report a chemical timer approach for manipulating the emission onset time of chemiluminescence (CL) reactions. A mixture of Mn2+, NaHCO3, and a luminol analog with H2O2 produced reactive oxygen species (ROS) radicals and other superoxo species (superoxide containing complex) with high efficiency, accompanied by strong and immediate CL emission. Surprisingly, the addition of thiourea postponed CL emission in a concentration-dependent manner. The delay was attributed to a slow-generation-scavenging mechanism, which was found to be generally applicable not only to various types of CL reagents and ROS radical scavengers but also to popular chromogenic reactions. The precise regulation of CL kinetics was further utilized in dynamic chemical coding with improved coding density and security. This approach provides a powerful platform for engineering chemical reaction kinetics using chemical timers, which is of application potential in bioassays, biosensors, CL microscopic imaging, microchips, array chips, and informatics.

O-Fluorobenzoic Acid-Mediated Construction of Porous Graphitic Carbon Nitride with Nitrogen Defects for Multicolor Electrochemiluminescence Imaging Sensing.

Graphitic carbon nitride (g-CN) is an attractive electrochemiluminescence (ECL) luminophore. However, g-CN with wavelength-tunable ECL emission is still limited, which limits its application in multicolor ECL sensing and imaging analysis. In this study, porous g-CN (PCN) with nitrogen defects was synthesized through the condensation of melamine by using o-fluorobenzoic acid (o-FBA) as an effective regulation reagent. A series of PCNs, including PCN-5%, PCN-10%, and PCN-30%, were obtained by changing the mass ratio of o-FBA and melamine. The porous structure and tunable chemical composition change of the PCNs were carefully characterized. The nitrogen defects and porous structure of the synthesized PCNs can enlarge the specific surface area, facilitate electron transfer, and generate various surface states with gradually changed energy bands, leading to wavelength-tunable multicolor ECL emissions. Accordingly, g-CN, PCN-5%, PCN-10%, and PCN-30% can generate navy blue, turquoise blue, turquoise green, and olive green ECL emissions, respectively, with the peak ECL wavelength varied from 465 to 550 nm. Then, a multicolor ECL sensing array was proposed for the discrimination of polyphenols based on the prepared g-CN and PCNs by using a smartphone as a portable detector for the first time. Five polyphenol substances including vitamin P, resveratrol, phloretin, phlorizin, and caffeic acid were discriminated by using principal component analysis and hierarchical cluster analysis. The present work provides a simple strategy to adjust the ECL wavelength of g-CN and presents a simple way to fabricate multicolor ECL sensing array, which has great application potential for multiplexed analysis and multicolor ECL imaging sensing.

Label-Free Immunoassay for Sensitive and Rapid Detection of the SARS-CoV-2 Antigen Based on Functionalized Magnetic Nanobeads with Chemiluminescence and Immunoactivity.

Direct detection of SARS-CoV-2 in biological specimens is often challenging due to the low abundance of viral components and lack of enough sensitivity. Herein, we developed a new type of chemiluminescent functionalized magnetic nanomaterial for sensitive detection of the SARS-CoV-2 antigen. First, HAuCl4 was reduced by N-(aminobutyl)-N-(ethylisoluminol) (ABEI) in the presence of amino magnetic beads (MB-NH2) to generate ABEI-AuNPs, which were directly assembled on the surface of MB-NH2. Then, Co2+ was modified onto the surface to form MB@ABEI-Au/Co2+ (MAA/Co2+). MAA/Co2+ exhibited good chemiluminescence (CL) and magnetic properties. It was also found that it was easy for the antibody to be connected with MAA/Co2+. Accordingly, MAA/Co2+ was used as a sensing interface to construct a label-free immunoassay for rapid detection of the N protein in SARS-CoV-2. The immunoassay showed a linear range from 0.1 pg/mL to 10 ng/mL and a low detection limit of 69 fg/mL, which was superior to previously reported methods for N protein detection. It also demonstrated good selectivity by virtue of magnetic separation, which effectively removed a sample matrix after immunoreactions. It was successfully applied for the detection of the N protein in spiked human serum and saliva samples. Furthermore, the immunoassay was integrated with an automatic CL analyzer with magnetic separation to detect the N protein in patient serums and rehabilitation patient serums with satisfactory results. Thus, the CL immunoassay without a complicated labeling procedure is sensitive, selective, fast, simple, and cost-effective, which may be used to combat the COVID-19 pandemic. Finally, the CL quenching mechanism of the N protein in the immunoassay was also explored.

Potential-Resolved Differential Electrochemiluminescence Immunosensor for Cardiac Troponin I Based on MOF-5-Wrapped CdS Quantum Dot Nanoluminophores.

Recently, nanoluminophores with the potential-resolved multicolor electrochemiluminescence (PRMCECL) property have emerged and shown promising applications in sensitive, selective, and accurate bioassays, bioimaging, and multicolor emitting devices. However, only limited PRMCECL nanoluminophores and their applications in ratiometric biosensors eliminating proportional errors have been reported. Herein, a novel PRMCECL nanoluminophore was synthesized by encapsulating CdS quantum dots (CdSQDs) into MOF-5 (CdSQDs@MOF-5). Using K2S2O8 as a coreactant, two electrochemiluminescence (ECL) peaks, ECL-1 centered at 685 nm and ECL-2 centered at 475 nm, were observed at -1.4 and -1.8 V, respectively. Related ECL mechanisms have been proposed. Based on the potential-resolved ECL signals, a label-free differential ECL immunosensor for the determination of cardiac troponin I (cTnI) was established by assembly of poly(diallyldimethylammonium chloride), CdSQDs@MOF-5, and cTnI antibody-functionalized silver nanoparticles on the surface of the fluorine-doped tin oxide electrode subsequently. In the presence of cTnI, cTnI was captured by the sensing interface, leading to an increase in ECL-1 and ECL-2 intensity. cTnI could be determined in the range of 0.01-1000 pg/mL with a detection limit of 5.01 fg/mL using the intensity difference between ECL-1 and ECL-2. This work provides a new family member of PRMCECL nanoluminophores. The proposed label-free differential ECL immunosensor provides a new strategy based on potential-resolved ECL signals, which could effectively eliminate the additive error and show better sensitivity, selectivity, and accuracy for the detection of cTnI than the single-signal strategy and ratiometric strategy.

Label-Free Ratiometric Electrochemiluminescence Aptasensor Based on Nanographene Oxide Wrapped Titanium Dioxide Nanoparticles with Potential-Resolved Electrochemiluminescence.

A new "one-pot" hydrothermal method was developed for the preparation of electrochemiluminescence (ECL) nanoluminophores nanographene oxide wrapping titanium dioxide (nGO@TiO2 NLPs). The characterization demonstrated that nGO@TiO2 NLPs possessed a core-shell-like shape. The nGO@TiO2 NLPs exhibited potential-resolved ECL property in neutral aqueous solution using K2S2O8 as a coreactant. On this basis, a label-free ratiometric ECL aptasensor was designed. nGO@TiO2 NLPs were used to fabricate the ECL interface for target recognition, potential-resolved ECL signal generation, and amplification. In the presence of cardiac troponin I (cTnI), the aptamer resides from the electrode surface owing to its rigidity, resulting in a reduction in charge transfer resistance of the modified working electrode and a ratio enhancement of two ECL signals of nGO@TiO2 NLPs. According to the increased ECL ratio, cTnI could be determined by the ratiometric ECL aptasensor, with a linear dynamic range of 1.0 × 10-13-1.0 × 10-10 mol/L and a detection limit of 4.0 × 10-14 mol/L, which is superior to most reported electrochemical methods. This label-free ratiometric ECL strategy with self-calibrating ability and accurate, ultrasensitive, rapid, specific analytical performance showed great promise in biosensing and clinical diagnosis. The developed strategy might extend for the sensing of other protein biomarkers by using corresponding antibodies or aptamers as recognition elements.

Highly chemiluminescent TiO2/tetra(4-carboxyphenyl)porphyrin/N-(4-aminobutyl)-N-ethylisoluminol nanoluminophores for detection of heart disease biomarker copeptin based on chemiluminescence resonance energy transfer.

In this work, the chemiluminescence (CL) property of 5,10,15,20-tetrakis(4-carboxyphenyl)-porphyrin- and N-(4-aminobutyl)-N-ethylisoluminol-functionalized TiO2 nanoparticles (TiO2-TCPP-ABEI nanoluminophores) was studied for the first time. It was found that TiO2-TCPP-ABEI nanoluminophores exhibited excellent CL activity in the presence of H2O2. The CL mechanism has been proposed due to the reaction of ABEI with H2O2 and catalytic effect of TiO2 and TCPP. Furthermore, trisodium citrate-stabilized gold nanoparticles were observed to effectively quench the CL of TiO2-TCPP-ABEI due to CL resonance energy transfer (CRET). On this basis, a sensitive and selective CRET-based immunoassay was developed for the determination of copeptin by using TiO2-TCPP-ABEI nanoluminophores as both CL nanointerface and energy donor, and using cit-AuNPs as an effective energy receptor. The immunoassay exhibited a wide dynamic range from 5 × 10-12 to 1 × 10-9 g mL-1 with a low detection limit of 1.54 × 10-12 g mL-1, which was superior to previously reported CL-based immunoassays. It was successfully applied for the determination of copeptin in serum samples, which would provide a good practical perspective on the clinical diagnosis. This strategy may also be used for the detection of other antigens if corresponding antibodies are available. Graphical abstract.

Coreactant-Free and Label-Free Eletrochemiluminescence Immunosensor for Copeptin Based on Luminescent Immuno-Gold Nanoassemblies.

In this work, the eletrochemiluminescence (ECL) behavior of Cu2+/cysteine complexes and N-(aminobutyl)- N-(ethylisoluminol) (ABEI) functionalized gold nanoparticles combined with chitosan (Cu2+-Cys-ABEI-GNPs-CS) were studied by cyclic voltammetry and a double-step potential, which exhibited excellent ECL properties without any coreactant. It was found that the ECL intensity of Cu2+-Cys-ABEI-GNPs-CS could increase at least 1 order of magnitude compared with that of Cu2+-Cys-ABEI-GNPs. Furthermore, a coreactant-free and label-free ECL immunosensor has been established for the determination of early acute myocardial infarction biomarker copeptin based on luminescent immuno-gold nanoassemblys consisting of Cu2+-Cys-ABEI-GNPs-CS and immuno-gold nanoparticles prepared by connecting copeptin antibody with trisodium citrate stabilized gold nanoparticles. In the presence of copeptin, an obvious decrease in ECL intensity was observed due to the formation of antibody-antigen immunocomplex, which could be used for the determination of copeptin in the range of 2.0 × 10-14-1.0 × 10-11 mol/L with a detection limit of 5.18 × 10-15 mol/L. The detection limit of the ECL immunosensor is at least 2 orders of magnitude lower than that of sandwich immunoassays based on labeling technology. Also, the ECL immunosensor does not need any coreactant and avoids complicated labeling and purification procedure. It is ultrasensitive, simple, specific, and low-cost. This work reveals that the proposed luminescent immuno-gold nanoassemblies are ideal nanointerfaces for the construction of immunosensors. The proposed strategy may be used for the determination of other antigens if corresponding antibodies are available.

Potential-Resolved Multicolor Electrochemiluminescence of N-(4-Aminobutyl)-N-ethylisoluminol/tetra(4-carboxyphenyl)porphyrin/TiO2 Nanoluminophores.

Most electrochemiluminescence (ECL) studies involve single luminophore with a unique emission process, which severely limits its applications. Recently, multicolor ECL has attracted considerable interests. Herein, we report a novel nanoluminophore prepared by coating 5,10,15,20-tetrakis(4-carboxyphenyl)-porphyrin (TCPP) and N-(4-aminobutyl)-N-ethylisoluminol (ABEI) on the surface of TiO2 nanoparticles (TiO2-TCPP-ABEI), which exhibited unique potential-resolved multicolor ECL emissions using H2O2 and K2S2O8 as coreactants in an aqueous solution. Three ECL peaks, ECL-1 at 458 nm, ECL-2 at 686 nm, and ECL-3 at 529 nm, were obtained with peak potentials of 1.05, -1.65, and -1.85 V, which were attributed to the ECL emission of ABEI, TCPP, and TiO2 moiety of the nanoluminophores, respectively. Potential-resolved multicolor ECL from a nanoluminophore was observed for the first time in an aqueous solution. It opens a new research area of multicolor ECL of nanoluminophores, which is of great importance in ECL field from fundamental studies to practical applications.

Firefly-mimicking intensive and long-lasting chemiluminescence hydrogels.

Most known chemiluminescence (CL) reactions exhibit flash-type light emission. Great efforts have been devoted to the development of CL systems that emit light with high intensity and long-lasting time. However, a long-lasting CL system that can last for hundreds of hours is yet-to-be-demonstrated. Here we show firefly-mimicking intensive and long-lasting CL hydrogels consisting of chitosan, CL reagent N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and catalyst Co2+. The light emission is even visible to naked eyes and lasts for over 150 h when the hydrogels are mixed with H2O2. This is attributed to slow-diffusion-controlled heterogeneous catalysis. Co2+ located at the skeleton of the hydrogels as an active site catalyzes the decomposition of slowly diffusing H2O2, followed by the reaction with ABEI to generate intensive and long-lasting CL. This mimics firefly bioluminescence system in terms of intensity, duration time and catalytic characteristic, which is of potential applications in cold light sources, bioassays, biosensors and biological imaging.Great efforts have been devoted to the development of chemiluminescence systems that emit light with high intensity over long periods of time. Here the authors show, firefly-mimicking intensive and long-lasting chemiluminescence hydrogels consisting of chitosan, N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and catalyst Co2+.

Acridinium Ester-Functionalized Carbon Nanomaterials: General Synthesis Strategy and Outstanding Chemiluminescence.

In this work, three different kinds of acridinium ester (AE)-functionalized carbon nanomaterials, including AE-functionalized carbon nanoparticles (AE-CNPs), AE-functionalized graphene oxide (AE-GO), and AE-functionalized multiwalled carbon nanotubes (AE-MCNTs), were synthesized for the first time via a simple, general, and noncovalent strategy. AE molecules were assembled on the surface of carbon nanomaterials by electrostatic interaction, π-π stacking interaction, and amide bond. The synthesized AE-CNPs, AE-GO, and AE-MCNTs with 5.0 × 10(-8) mol·L(-1) of synthetic AE concentration, which was very low compared with other chemiluminescence (CL) reagents such as luminol, N-(aminobutyl)-N-(ethylisoluminol), and lucigenin at the concentration of 3.3 × 10(-4) to 5.0 × 10(-6) mol·L(-1) used for the synthesis of CL-functionalized nanomaterials, exhibited outstanding CL activity and good stability. It was found that carbon nanomaterials as nanosized platforms could efficiently immobilize AE molecules and facilitate the formation of OH(•) and O2(•-), leading to strong light emission. Moreover, the CL intensity of AE-GO was the highest, which was about 8.7 and 3.7 times higher than that of AE-CNPs and AE-MCNTs, respectively. This mainly resulted from a difference in the amount of adsorbed AE molecules on the surface of different carbon nanomaterials. Additionally, the prepared AE-CNPs demonstrated excitation-dependent fluorescence property and good fluorescence stability against photobleaching. On the basis of the excellent CL and special fluorescence properties of AE-CNPs, a dual-mode array strategy has been proposed for the first time and seven kinds of transition-metal ions could be successfully discriminated.

Direct electrochemiluminescence of gold nanoparticles bifunctionalized by luminol analogue-metal complexes in neutral and alkaline media.

Electrochemiluminescence of gold nanoparticles bifunctionalized by luminol analogue-metal complexes was studied for the first time. Strong direct electrochemiluminescence was observed in neutral and alkaline media without an additional coreactant.

Ultrasensitive label-free electrochemiluminescence immunosensor based on N-(4-aminobutyl)-N-ethylisoluminol-functionalized graphene composite.

The electrochemiluminescence (ECL) behavior of N-(4-aminobutyl)-N-ethylisoluminol (ABEI)-functionalized graphene composite (ABEI-GC) modified on an indium tin oxide (ITO) electrode was studied. ABEI-GC exhibited excellent ECL activity. On this basis, a label-free ECL immunosensor was developed for the sensitive detection of human immunoglobulin G (hIgG) by using ABEI-GC as the ECL nano-interface via a layer-by-layer assembly technique. ABEI-GC was first assembled onto an ITO electrode. Positively charged chitosan was then electrostatically adsorbed to the modified electrode. Finally, negatively charged antibody-coated gold nanoparticles were attached to the surface to form the ECL immunosensor. In the presence of hIgG, hIgG was captured by its antibody. In addition, an ECL signal was detected in the presence of H2O2 when a double potential was applied. The ECL immunosensor for the determination of hIgG showed a linear range of 1.0×10-13-1.0×10-8 g/mL with a detection limit of 5.0×10-14 g/mL. This immunosensor has high sensitivity, wide linearity and good reproducibility. The superior sensitivity of the proposed ECL immunoassay mainly derives from the incorporation of ABEI-GC, which not only improves the ECL intensity, response speed, and stability, but also provides a large specific surface for high levels of protein loading. This work reveals that ABEI-GC is good nano-interface for the construction of ECL biosensors. Our strategy is promising for protein detection and may open up a new avenue for ultrasensitive label-free immunoassays.

Gold nanoparticles bifunctionalized by chemiluminescence reagent and catalyst metal complexes: synthesis and unique chemiluminescence property.

Despite much progress in functionalized gold nanomaterial (GNMs), chemiluminescent (CL) functionalized GNMs with high CL efficiency are far from fully developed. In this work, we report a general strategy for the synthesis of gold nanoparticles (GNPs) bifunctionalized by CL reagent and catalyst metal complexes (BF-GNPs) by taking N-(aminobutyl)-N-(ethylisoluminol) (ABEI) as a model of CL reagents. The complexes of 2-[bis[2-[carboxymethyl-[2-oxo-2-(2-sulfanylethylamino)ethyl]amino]ethyl]amino]acetic acid (DTDTPA) with various metal ions, including Co(2+), Cu(2+), Pb(2+), Ni(2+), Hg(2+), Cr(3+), Eu(3+), La(3+), Gd(3+), Sm(3+), Er(3+), Dy(3+), Ce(4+), and Ce(3+), were grafted on the surface of ABEI functionalized GNPs (ABEI-GNPs) to form a series of BF-GNPs. These BF-GNPs exhibited excellent CL activity. In particular, the CL intensity of DTDTPA/Co(2+)-ABEI-GNPs was over 3 orders of magnitude higher than ABEI-GNPs. This work demonstrates for the first time that metal complexes grafted on the surface of GNPs have unique catalytic activity on the CL reaction, superior to that in the liquid phase. Such BF-GNPs may find future applications in bioassays, microchips, and molecular/cellular imaging.

A graphene-based composite material noncovalently functionalized with a chemiluminescence reagent: synthesis and intrinsic chemiluminescence activity.

A bottom-up approach for preparing multifunctional graphene-based materials noncovalently functionalized with CL reagents with aromatic rings such as N-(aminobutyl)-N-(ethylisoluminol) (ABEI), luminol and isoluminol is reported. The as-prepared nanocomposites exhibit good CL activity, which may find future applications in analytical, electrochemical and biomedical fields.