RESUMEN
When an ultrasonic pulse propagates in a thin plate, nonlinear Lamb waves with higher harmonics and a zero-frequency component (ZFC) will be generated because of the nonlinearity of materials. The ZFC, also known as the static displacement or static component, has its unique application on the evaluation of early-stage damages in the elastic symmetrical undulated plate. In this study, analysis of the excitation mechanism of the ZFC and the second harmonic component (SHC) was theoretically and numerically investigated, and the material early-stage damage of a symmetrical undulated was characterized by studying the propagation of nonlinear Lamb waves. Both the ZFC and SHC can be effectively employed in monitoring the material damages of the undulated plate in its early stage. However, several factors must be considered for the propagation of the SHC in an undulated plate because of the geometric curvature and interference between the second harmonics during propagation, preventing efficient application of this technique. If the fundamental wave can propagate in the plate regardless of the plate boundary conditions, an accumulative effect always exists for the ZFC in a thin plate, indicating that the ZFC is independent of the structural geometry. This study reveals that the ZFC-based inspection technique is more efficient and powerful in characterizing the damages of a symmetrical undulated plate in the early stage of service compared to the second harmonic method.
RESUMEN
Fully considering the mechanical and photoelastic anisotropies of monocrystalline silicon, the impacts of spatial symmetries on the stimulated Brillouin scatterings (SBSs) in nanoscale suspended silicon waveguides are studied theoretically and numerically based on group theory. First, starting from an assumption that the principal material coordinate system can be arbitrarily orientated in a waveguide with fixed geometry, the silicon waveguides are systematically classified into a number of point groups according to their spatial symmetry features. Thereafter, the symmetry characteristics of physical fields and SBS opto-mechanical coupling characteristics in the silicon waveguides belonging to different point groups are further examined, and the major new findings can be summarized as follows: The SBS opto-mechanical couplings in several kinds of silicon waveguides with certain nontrivial symmetry features exhibit relatively predictable behaviors in that the opto-mechanical coupling coefficients can be deterministically vanishing or nonvanishing under very few constraints, which can thus serve as general symmetry selection rules for SBSs in suspended silicon waveguides. The results obtained in the present study could be a useful theoretical reference for the design of novel SBS-active silicon photonic devices.
RESUMEN
This paper numerically and experimentally investigates the resonant behavior of one-way Lamb and SH (shear horizontal) mixing method in thin plates with quadratic nonlinearity. When the primary S0-mode Lamb waves and SH0 waves mix in the region with quadratic nonlinearity, both numerical and experimental results verify the generation of the resonant SH0 waves if the resonance condition [Formula: see text] is satisfied. Meanwhile, we find that the acoustic nonlinear parameter (ANP) increases monotonously with material quadratic nonlinearity, the length of the damage region and the frequency of the resonant wave. Furthermore, the damage region can be located by the time-domain signal of the resonant wave based on one-way S0-SH0 mixing method. This study numerically and experimentally reveals that one-way Lamb and SH mixing method is feasible to quantitatively evaluate and locate the damage region of quadratic nonlinearity in thin plates.
RESUMEN
Experimental investigations on the mechanical properties of ultra-high performance concrete (UHPC) incorporating two types of recycled steel fiber processed from waste tires and three types of industrial steel fiber were carried out for comparison. Mechanical properties of UHPC include compressive strength, splitting tensile strength, fracture energy, and elastic modulus. Their explosive spalling behaviors under high temperatures were also investigated. The results show that all types of steel fiber exhibit a beneficial effect on the mechanical properties and the anti-spalling behavior of UHPC, except that recycled steel fiber with rubber attached (RSFR) has a slightly negative effect on the compressive strength of UHPC. Compared to industrial steel fibers, recycled steel fibers have a more significant influence on improving the splitting tensile strength and fracture energy of UHPC, and the improvement of RSFR was much higher than that of recycled steel fiber without rubber (RSF). UHPC that incorporates industrial hooked-end steel fiber (35 mm in length and 0.55 mm in diameter) exhibits the best resistance to explosive spalling, and the second is the RSF reinforced UHPC. The positive relationship between the fracture energy and the anti-spalling behavior of steel fiber reinforced UHPC can be presented. These results suggest that recycled steel fiber can be a toughening material and substitute for industrial steel fibers to be used in ultra-high performance concrete, especially RSFR.
