Influence of the Structure on Magnetic Properties of Calcium-Phosphate Systems Doped with Iron and Vanadium Ions.

The aim of this study was to prepare and characterize the glasses made of x(Fe2O3∙V2O5)∙(100 - x)[P2O5∙CaO] with x ranging of 0-50%. The contribution of Fe2O3 and V2O5 amount on the structure of P2O5·CaO matrix was investigated. The vitreous materials were characterized by XRD (X-ray diffraction analysis), EPR (Electron Paramagnetic Resonance) spectroscopy, and magnetic susceptibility measurements. A hyperfine structure typical for isolated V4+ ions was noticed to all spectra containing low amount of V2O5. The XRD spectra show the amorphous nature of samples, apart x = 50%. An overlap of the EPR spectrum of a broad line without the hyperfine structure characteristic of clustered ions was observed with increasing V2O5 content. The results of magnetic susceptibility measurements explain the antiferromagnetic or ferromagnetic interactions expressed between the iron and vanadium ions in the investigated glass.

Temperature-Driven Transformation of the Crystal and Magnetic Structures of BiFe0.7Mn0.3O3 Ceramics.

The compound BiFe0.7Mn0.3O3 consisting at room temperature of coexistent anti-polar orthorhombic and polar rhombohedral phases has a metastable structural state, which has been studied by laboratory X-ray, synchrotron and neutron diffraction, magnetometry, differential thermal analysis, and differential scanning calorimetry. Thermal annealing of the sample at temperatures above the temperature-driven phase transition into the single phase rhombohedral structure (~700 K) causes an increase of the volume fraction of the rhombohedral phase at room temperature from ~10% up to ~30%, which is accompanied by the modification of the magnetic state, leading to strengthening of a ferromagnetic component. A strong external magnetic field (~5 T) applied to the sample notably changes its magnetic properties, as well as provides a reinforcement of the ferromagnetic component, thus leading to an interaction between two magnetic subsystems formed by the antiferromagnetic matrix with non-collinear alignment of magnetic moments and the nanoscale ferromagnetic clusters coexisting within it. The modification of the structural state and magnetic properties of the compounds and a correlation between different structural and magnetic phases are discussed focusing on the effect of thermal annealing and the impact of an external magnetic field.

Structural and Magnetic Phase Transitions in BiFe1 - xMnxO3 Solid Solution Driven by Temperature.

The crystal structure and magnetic state of the (1 − x)BiFeO3-(x)BiMnO3 solid solution has been analyzed by X-ray diffraction using lab-based and synchrotron radiation facilities, magnetization measurements, differential thermal analysis, and differential scanning calorimetry. Dopant concentration increases lead to the room-temperature structural transitions from the polar-active rhombohedral phase to the antipolar orthorhombic phase, and then to the monoclinic phase accompanied by the formation of two-phase regions consisting of the adjacent structural phases in the concentration ranges 0.25 < x1 < 0.30 and 0.50 ≤ x2 < 0.65, respectively. The accompanied changes in the magnetic structure refer to the magnetic transitions from the modulated antiferromagnetic structure to the non-colinear antiferromagnetic structure, and then to the orbitally ordered ferromagnetic structure. The compounds with a two-phase structural state at room temperature are characterized by irreversible temperature-driven structural transitions, which favor the stabilization of high-temperature structural phases. The magnetic structure of the compounds also exhibits an irreversible temperature-induced transition, resulting in an increase of the contribution from the magnetic phase associated with the high-temperature structural phase. The relationship between the structural parameters and the magnetic state of the compounds with a metastable structure is studied and discussed depending on the chemical composition and heating prehistory.

Crystal and Magnetic Structure Transitions in BiMnO3+δ Ceramics Driven by Cation Vacancies and Temperature.

The crystal structure of BiMnO3+δ ceramics has been studied as a function of nominal oxygen excess and temperature using synchrotron and neutron powder diffraction, magnetometry and differential scanning calorimetry. Increase in oxygen excess leads to the structural transformations from the monoclinic structure (C2/c) to another monoclinic (P21/c), and then to the orthorhombic (Pnma) structure through the two-phase regions. The sequence of the structural transformations is accompanied by a modification of the orbital ordering followed by its disruption. Modification of the orbital order leads to a rearrangement of the magnetic structure of the compounds from the long-range ferromagnetic to a mixed magnetic state with antiferromagnetic clusters coexistent in a ferromagnetic matrix followed by a frustration of the long-range magnetic order. Temperature increase causes the structural transition to the nonpolar orthorhombic phase regardless of the structural state at room temperature; the orbital order is destroyed in compounds BiMnO3+δ (δ ≤ 0.14) at temperatures above 470 °C.

Operando tracking of oxidation-state changes by coupling electrochemistry with time-resolved X-ray absorption spectroscopy demonstrated for water oxidation by a cobalt-based catalyst film.

Transition metal oxides are promising electrocatalysts for water oxidation, i.e., the oxygen evolution reaction (OER), which is critical in electrochemical production of non-fossil fuels. The involvement of oxidation state changes of the metal in OER electrocatalysis is increasingly recognized in the literature. Tracing these oxidation states under operation conditions could provide relevant information for performance optimization and development of durable catalysts, but further methodical developments are needed. Here, we propose a strategy to use single-energy X-ray absorption spectroscopy for monitoring metal oxidation-state changes during OER operation with millisecond time resolution. The procedure to obtain time-resolved oxidation state values, using two calibration curves, is explained in detail. We demonstrate the significance of this approach as well as possible sources of data misinterpretation. We conclude that the combination of X-ray absorption spectroscopy with electrochemical techniques allows us to investigate the kinetics of redox transitions and to distinguish the catalytic current from the redox current. Tracking of the oxidation state changes of Co ions in electrodeposited oxide films during cyclic voltammetry in neutral pH electrolyte serves as a proof of principle.

Conformal Solution Deposition of Pt-Pd Titania Nanocomposite Coatings for Light-Assisted Formic Acid Electro-Oxidation.

Many nanofabrication processes require sophisticated equipment, elevated temperature, vacuum or specific atmospheric conditions, templates, and exotic chemicals, which severely hamper their implementation in real-world applications. In this study, we outline a fully wet-chemical procedure for equipping a 3D carbon felt (CF) substrate with a multifunctional, titania nanospike-supported Pt-Pd nanoparticle (Pt-Pd-TiO2@CF) layer in a facile and scalable manner. The nanostructure, composition, chemical speciation, and formation of the material was meticulously investigated, evidencing the conformal coating of the substrate with a roughened layer of nanocrystalline rutile spikes by chemical bath deposition from Ti3+ solutions. The spikes are densely covered by bimetallic nanoparticles of 4.4 ± 1.1 nm in size, which were produced by autocatalytic Pt deposition onto Pd seeds introduced by Sn2+ ionic layer adsorption and reaction. The as-synthesized nanocomposite was applied to the (photo)electro-oxidation of formic acid (FA), exhibiting a superior performance compared to Pt-plated, Pd-seeded CF (Pt-Pd@CF) and commercial Pt-C, indicating the promoting electrocatalytic role of the TiO2 support. Upon UV-Vis illumination, the performance of the Pt-Pd-TiO2@CF electrode is remarkably increased (22-fold), generating a current density of 110 mA cm-2, distinctly outperforming titania-free Pt-Pd@CF (5 mA cm-2) and commercial Pt-C (6 mA cm-2) reference catalysts. In addition, the Pt-Pd-TiO2@CF showed a much better stability, characterized by a very high poisoning tolerance for in situ-generated CO intermediates, whose formation is hindered in the presence of TiO2. This overall performance boost is attributed to a dual enhancement mechanism (∼30% electrocatalytic and ∼70% photoelectrocatalytic). The photogenerated electrons from the TiO2 conduction band enrich the electron density of the Pt nanoparticles, promoting the generation of active oxygen species on their surfaces from adsorbed oxygen and water molecules, which facilitate the direct FA electro-oxidation into CO2.