Special Issue-Biosensors and Neuroscience: Is Biosensors Engineering Ready to Embrace Design Principles from Neuroscience?

In partnership with the Air Force Office of Scientific Research (AFOSR), the National Science Foundation's (NSF) Emerging Frontiers and Multidisciplinary Activities (EFMA) office of the Directorate for Engineering (ENG) launched an Emerging Frontiers in Research and Innovation (EFRI) topic for the fiscal years FY22 and FY23 entitled "Brain-inspired Dynamics for Engineering Energy-Efficient Circuits and Artificial Intelligence" (BRAID) [...].

CRISPR/Cas Technology: The Unique Synthetic Biology Genome-Editing Tool Shifting the Paradigm in Viral Diagnostics, Defense, and Therapeutics.

The emergence of the COVID-19 pandemic has starkly exposed our significantly limited ability to promptly identify and respond to emergent biological threats. Consequently, there is an urgent need to advance biotechnological methods for addressing both known and unforeseen biological hazards. Recently, the CRISPR/Cas system has revolutionized genetic engineering, enabling precise and efficient synthetic biology applications. Therefore, this review aims to provide a comprehensive introduction to the fundamental principles underlying the CRISPR/Cas system and assess the advantages and limitations of various CRISPR/Cas-based techniques applicable to the detection of, defense against, and treatment of viral infections. These techniques include viral diagnostics, the development of antiviral vaccines, B cell engineering for antibody production, viral activation/interference, and epigenetic modifications. Furthermore, this review delves into the challenges and bioethical considerations associated with use of the CRISPR/Cas system. With the continuous evolution of technology, the CRISPR/Cas system holds considerable promise for addressing both existing and unforeseen biological threats.

Simultaneous Surface Plasmon Resonance/Fluorescence Spectroelectrochemical in Situ Monitoring of Dynamic Changes on Functional Interfaces: A Study of the Electrochemical Proximity Assay Model System.

Understanding the chemical composition and morphology of interfaces plays a vital role in the development of sensors, drug delivery systems, coatings for biomedical implants, and so forth. In many cases, the interface characterization can be performed by a combination of electrochemical and one of the optical techniques. In this study, we further enhanced capabilities in probing interfaces by combining electrochemical characterization with multiple optical techniques, that is, surface plasmon resonance (SPR) and fluorescence spectroscopy. This new combination was utilized to study the electrochemical proximity assay (ECPA)-a recently developed protein recognition strategy for the point-of-care test. The SPR/fluorescence spectroelectrochemical technique has achieved not only recognition of binding components involved in the ECPA model system, estimation of their thicknesses and surface coverages, but more importantly, highly reliable in situ monitoring of dynamic changes of components involved in interfacial binding via cross-validation and confirmation from three simultaneously generated signals-SPR, fluorescence, and electrochemistry. In addition, the obtained corresponding proportions among magnitudes of three signals provide crucial information for future studies on simultaneous characterization of multiple components in one step and differentiation of nonspecific binding events. Another advantage using this technique is that the excitation of fluorescence is not only confined by surface plasmons, but by photons, so the fluorescence information can be also gained as the distance of fluorophores from the surface exceeds the decay length of surface plasmons.

Layer-by-layer assembled carbon nanotube-acetylcholinesterase/biopolymer renewable interfaces: SPR and electrochemical characterization.

Developing simple, reliable, and cost-effective methods of renewing an inhibited biocatalyst (e.g., enzymatic interfaces) on biosensors is needed to advance multiuse, reusable sensor applications. We report a method for the renewal of layer-by-layer (LbL) self-assembled inhibition-based enzymatic interfaces in multiwalled carbon nanotube (MWCNT) armored acetylcholinesterase (AChE) biosensors. The self-assembly process of MWCNT dispersed enzymes/biopolymers was investigated using surface plasmon resonance (SPR). The LbL fabrication consisted of alternating cushion layers of positively charged CNT-polyethylenimine (CNT-PEI) and negatively charged CNT-deoxyribonucleic acid (CNT-DNA) and a functional interface consisting of alternating layers of CNT-PEI and negatively charged CNT-acetylcholine esterase (CNT-AChE, pH 7.4). The observed SPR response signal increased while assembling the different layers, indicating the buildup of multiple layers on the Au surface. A partial desorption of the top enzymatic layer in the LbL structure was observed with a desorption strategy employing alkaline treatment. This indicates that the strong interaction of CNT-biopolymer conjugates with the Au surface was a result of both electrostatic interactions between biopolymers and the surface binding energy from CNTs: the closer the layers are to the Au surface, the stronger the interactions. In contrast, a similar LbL assembly of soluble enzyme/polyelectrolytes resulted in stronger desorption on the surface after the alkaline treatment; this led to the investigation of AChE layer removal, permanently inhibited after pesticide exposure on glassy carbon (GC) electrodes, while keeping the cushion layers intact. The desorption strategy permitted the SPR and electrochemical electrode surfaces to be regenerated multiple times by the subsequent self-assembly of fresh PEI/AChE layers. Flow-mode electrochemical amperometric analysis demonstrated good stability toward the determination of acetylcholine with 97.1 ± 2.7% renewability. Our simple, inexpensive approach shows the potential of renewable LbL self-assembled functional interfaces for multiple uses in a wide field of applications such as biosensing, various biotechnological processes, and the food and health industries.

A novel layer-by-layer assembled multi-enzyme/CNT biosensor for discriminative detection between organophosphorus and non-organophosphrus pesticides.

Organophosphate compounds are heavily used in agriculture and military activities, while non-organophosphate pesticides are mostly used in agriculture and home defense. Discriminative detection of such toxic compounds is very challenging and requires sophisticated and bulky instrumentation. Meanwhile, multi-enzyme biosensors may offer an effective solution to the problem and may become a versatile analytical tool for discriminative detection of different neurotoxins. In this study, we report for the first time a novel bi-enzyme biosensing system incorporating electrostatically interacted enzyme-armored MWCNT-OPH and MWCNT-AChE along with a set of cushioning bilayers consisting of MWCNT-polyethyleneimine and MWCNT-DNA on glassy carbon electrode for discriminative detection of organophosphorus (OP) and non-organophosphorus (non-OP) pesticides. LbL interfaces were characterized by surface plasmon resonance and electrochemical impedance spectroscopy, demonstrating stepwise assembly and electron conductivity studies. The detection limit was found to be ~0.5 for OP pesticide paraoxon and 1 µM for non-OP pesticide carbaryl, in a wide linear range. The biosensor performance was also validated using apple samples. Remarkable discriminative and straightforward detection between OP and non-OP neurotoxins was successfully achieved with cyclic voltammetry (CV) and UV-vis methods on the MWCNT-(PEI/DNA)2/OPH/AChE biosensor, showing great potential in large screening of OP and non-OP pesticides in practical applications.

Stabilization and anomalous hydration of collagen fibril under heating.

BACKGROUND: Type I collagen is the most common protein among higher vertebrates. It forms the basis of fibrous connective tissues (tendon, chord, skin, bones) and ensures mechanical stability and strength of these tissues. It is known, however, that separate triple-helical collagen macromolecules are unstable at physiological temperatures. We want to understand the mechanism of collagen stability at the intermolecular level. To this end, we study the collagen fibril, an intermediate level in the collagen hierarchy between triple-helical macromolecule and tendon. METHODOLOGY/PRINCIPAL FINDING: When heating a native fibril sample, its Young's modulus decreases in temperature range 20-58°C due to partial denaturation of triple-helices, but it is approximately constant at 58-75°C, because of stabilization by inter-molecular interactions. The stabilization temperature range 58-75°C has two further important features: here the fibril absorbs water under heating and the internal friction displays a peak. We relate these experimental findings to restructuring of collagen triple-helices in fibril. A theoretical description of the experimental results is provided via a generalization of the standard Zimm-Bragg model for the helix-coil transition. It takes into account intermolecular interactions of collagen triple-helices in fibril and describes water adsorption via the Langmuir mechanism. CONCLUSION/SIGNIFICANCE: We uncovered an inter-molecular mechanism that stabilizes the fibril made of unstable collagen macromolecules. This mechanism can be relevant for explaining stability of collagen.

Affinity and enzyme-based biosensors: recent advances and emerging applications in cell analysis and point-of-care testing.

The applications of biosensors range from environmental testing and biowarfare agent detection to clinical testing and cell analysis. In recent years, biosensors have become increasingly prevalent in clinical testing and point-of-care testing. This is driven in part by the desire to decrease the cost of health care, to shift some of the analytical tests from centralized facilities to "frontline" physicians and nurses, and to obtain more precise information more quickly about the health status of a patient. This article gives an overview of recent advances in the field of biosensors, focusing on biosensors based on enzymes, aptamers, antibodies, and phages. In addition, this article attempts to describe efforts to apply these biosensors to clinical testing and cell analysis.

Electrochemical biosensors for on-chip detection of oxidative stress from immune cells.

Seamless integration of biological components with electrochemical sensors is critical in the development of microdevices for cell analysis. The present paper describes the integration miniature Au electrodes next to immune cells (macrophages) in order to detect cell-secreted hydrogen peroxide (H(2)O(2)). Photopatterning of poly(ethylene glycol) (PEG) hydrogels was used to both immobilize horseradish peroxidase molecules onto electrodes and to define regions for cell attachment in the vicinity of sensing electrodes. Electrodes micropatterned in such a manner were enclosed inside poly(dimethylsiloxane) fluid conduits and incubated with macrophages. The cells attached onto the exposed glass regions in the vicinity of the electrodes and nowhere else on the non-fouling PEG hydrogel surface. A microfluidic device was converted into an electrochemical cell by placing flow-through Ag∕AgCl reference and Pt wire counter electrodes at the outlet and inlet, respectively. This microdevice with integrated H(2)O(2)-sensing electrodes had sensitivity of 27 µA∕cm(2) mM with a limit of detection of 2 µM. Importantly, this microdevice allowed controllable seeding of macrophages next to electrodes, activation of these cells and on-chip monitoring of H(2)O(2) release in real time. In the future, this biosensor platform may be utilized for monitoring of macrophage responses to pathogens or for the study of inflammatory signaling in micropatterned cell cultures.

Renewable nanocomposite layer-by-layer assembled catalytic interfaces for biosensing applications.

A novel, easily renewable nanocomposite interface based on layer-by-layer (LbL) assembled cationic/anionic layers of carbon nanotubes customized with biopolymers is reported. A simple approach is proposed to fabricate a nanoscale structure composed of alternating layers of oxidized multiwalled carbon nanotubes upon which is immobilized either the cationic enzyme organophosphorus hydrolase (OPH; MWNT-OPH) or the anionic DNA (MWNT-DNA). The presence of carbon nanotubes with large surface area, high aspect ratio and excellent conductivity provides reliable immobilization of enzyme at the interface and promotes better electron transfer rates. The oxidized MWNTs were characterized by thermogravimetric analysis and Raman spectroscopy. Fourier transform infrared spectroscopy showed the surface functionalization of the MWNTs and successful immobilization of OPH on the MWNTs. Scanning electron microscopy images revealed that MWNTs were shortened during sonication and that LbL of the MWNT/biopolymer conjugates resulted in a continuous surface with a layered structure. The catalytic activity of the biopolymer layers was characterized using absorption spectroscopy and electrochemical analysis. Experimental results show that this approach yields an easily fabricated catalytic multilayer with well-defined structures and properties for biosensing applications whose interface can be reactivated via a simple procedure. In addition, this approach results in a biosensor with excellent sensitivity, a reliable calibration profile, and stable electrochemical response.

Detecting interferon-gamma release from human CD4 T-cells using surface plasmon resonance.

Cytokine secretion by leukocytes is an important indicator of immune response to pathogens and therefore has significant implications in disease diagnostics. Given heterogeneity of leukocyte subsets and the ability of multiple cell subsets to secrete the same cytokines, connecting cytokine production to a specific leukocyte subset is a distinct challenge. In the present paper we describe a strategy combining antibody (Ab)-based affinity cell separation and surface plasmon resonance (SPR) for capturing human CD4 T-cells and for label-free detection of cell-secreted interferon (IFN)-gamma--an important inflammatory cytokine. Human blood was introduced into a flow chamber modified with anti-CD4 Abs resulting in capture of CD4(+) T-cells. After mitogenic activation of cells inside the flow chamber, culture medium was routed onto an SPR chip modified with monoclonal IFN-gamma Abs. SPR signal observed in this experiment correlated with cytokine production by T-cells. The strategy of combining SPR detection with cell purification may be used in the future for label-free, sensitive detection of multiple cytokines or proteins secreted by the desired cell subset.

Monitoring of diisopropyl fluorophosphate hydrolysis by fluoride-selective polymeric films using absorbance spectroscopy.

In this study, a novel system for the detection and quantification of organofluorophosphonates (OFP) has been developed by using an optical sensing polymeric membrane to detect the fluoride ions produced upon OFP hydrolysis. Diisopropyl fluorophosphate (DFP), a structural analogue of type G chemical warfare agents such as Sarin (GB) and Soman (GD), is used as the surrogate target analyte. An optical sensing fluoride ion selective polymeric film was formulated from plasticized PVC containing aluminum(III) octaethyl porphyrin and ETH 7075 chromoionophore (Al[OEP]-ETH 7075). Selected formulations were used to detect the fluoride ions produced by the catalytic hydrolysis of DFP by the enzyme organophosphate hydrolase (OPH, EC 3.1.8.1). The changes in absorbance that corresponded to the deprotonated state of chromoionophore within the film results from simultaneous coextraction of fluoride and protons as DFP hydrolysis takes place in the solution phase in contact with the film. The developed sensing system demonstrates excellent sensitivity for concentrations as low as 0.1microM DFP.

Immobilizing enzymes onto electrode arrays by hydrogel photolithography to fabricate multi-analyte electrochemical biosensors.

This paper describes a biomaterial microfabrication approach for interfacing functional biomolecules (enzymes) with electrode arrays. Poly (ethylene glycol) (PEG) hydrogel photopatterning was employed to integrate gold electrode arrays with the enzymes glucose oxidase (GOX) and lactate oxidase (LOX). In this process, PEG diacrylate (DA)-based prepolymer containing enzyme molecules as well as redox species (vinylferrocene) was spin-coated, registered, and UV cross-linked on top of an array of gold electrodes. As a result, enzyme-carrying circular hydrogel structures (600 microm diameter) were fabricated on top of 300 microm diameter gold electrodes. Importantly, when used with multiple masks, hydrogel photolithography allowed us to immobilize GOX and LOX molecules on adjacent electrodes within the same electrode array. Cyclic voltammetry and amperometry were used to characterize biosensor electrode arrays. The response of the biosensor array was linear for up to 20 mM glucose with sensitivity of 0.9 microA cm(-2) mM(-1) and 10 mM lactate with sensitivity of 1.1 microA cm(-2) mM(-1). Importantly, simultaneous detection of glucose and lactate from the same electrode array was demonstrated. A novel strategy for integrating biological and electrical components of a biosensor described in this paper provides the flexibility to spatially resolve and register different biorecognition elements with individual members of a miniature electrode array. Of particular interest to us are future applications of these miniature electrodes for real-time monitoring of metabolite fluxes in the vicinity of living cells.

Orientation specific positioning of organophosphorus hydrolase on solid interfaces for biosensor applications.

Protein immobilization on solid interfaces is a crucial aspect of their successful application in technologies such as biosensing, purification, separation, decontamination, etc. Although immobilization can improve the long-term and operational stability of proteins, this is often at the cost of significant losses in the catalytic activity of the tethered enzyme. Covalent attachment methods take advantage of reactive groups on the amino acid side chains. The distribution of the solvent exposed side chains on an enzyme's molecular surface often results in an ensemble of orientations when the protein is immobilized on a surface or in a matrix through these side chain linkages. Depending on the attachment mechanism and resulting orientation, access to and from the active site could be restricted. This study describes a methodology for the design and implementation of an orientation specific attachment of an enzyme to a surface plasmon resonance sensor surface. The enzyme, organophosphorus hydrolase, was structurally analyzed to identify surface resides as candidates for modification to optimize active site accessibility and, thus, sensitivity of detection. A single surface lysine on the active site face of the enzyme dimer was selected for elimination, thus allowing for the immobilization of the catalyst in the preferred orientation. Kinetic evaluation of the enzymes determined that the surface lysine-to-alanine variant retained 80% of the wild-type activity with the neurotoxin substrates, paraoxon and demeton-S. After immobilization, surfaces bearing the variant were determined to be more active even though the enzyme coverage on the sensor surface was reduced by 17%.

Lysozyme-mediated formation of protein-silica nano-composites for biosensing applications.

We demonstrate a rapid method for enzyme immobilization directly on a waveguide surface by encapsulation in a silica matrix. Organophosphate hydrolase (OPH), an enzyme that catalytically hydrolyzes organophosphates, was used as a model enzyme to demonstrate the utility of lysozyme-mediated silica formation for enzyme stabilization. Silica morphology and the efficiency of OPH encapsulation were directly influenced by the precursor choice used in silica formation. Covalent attachment of the lysozyme template directly to the waveguide surface provided a stable basis for silica formation and significantly increased the surface area for OPH encapsulation. OPH conjugated to a pH-responsive fluorophore was encapsulated in silica and patterned to a waveguide surface to demonstrate the immobilization strategy for the development of an organophosphate array biodetector. Silica-encapsulated OPH retained its catalytic activity for nearly 60 days with a detection limit of paraoxon of approximately 35 microM. The encapsulation technique provides a potentially versatile tool with specific application to biosensor development.

Strong antimicrobial coatings: single-walled carbon nanotubes armored with biopolymers.

Large scale biomimetic single-walled carbon nanotube (SWNT) coatings with significant antimicrobial activity, high Young's Modulus, and controlled morphology were fabricated using layer-by-layer assembly. Thickness was controlled within 1.6 nm and SWNT orientation was controlled using a directed air stream. This unique blend of multifunctionality and vertical and lateral control of a bottom-up assembly process is a significant advancement in developing macroscale assemblies with the combined attributes of SWNTs and natural materials.

Highly sensitive phage-based biosensor for the detection of beta-galactosidase.

Development of real-time sensor based on the target-specific probe that make possible sensitive, rapid and selective detection and monitoring of the particular antigen molecules could be of substantial importance to the many applications. Because of its high specificity to the target molecules, excellent temperature stability, and easy production, bacterial phage might serve as a powerful biorecognition probe in biosensor applications. Here, we report extremely sensitive and specific label-free direct detection of model antigen, beta-galactosidase (beta-gal), based on surface plasmon resonance (SPR) spectroscopy. The beta-gal specific landscape phage 1G40 has been immobilized on the gold surface of SPR SPREETA sensor chip through physical adsorption [V. Nanduri, A.M. Samoylova, V.Petrenko, V. Vodyanoy and A.L.Simonian, Comparison of optical and acoustic wave phage biosensors, 206th Meeting of The Electrochemical Society, Honolulu, Hawaii, October 3-8, (2004)]. Another non-specific to the beta-gal phage, a wild-type phage F8-5, was used in the reference channel. The concentration-dependent binding of beta-gal in both channels were assessed by monitoring the sensor optical response as a function of time under different experimental conditions, and the concentration of beta-gal was computed in differential mode. Concentrations of beta-gal between 10(-12) M and 10(-7) M could be readily detected, with linear part of calibration curve between 10(-9) M and 10(-6) M. When beta-gal was pre-incubated with different concentrations of free 1G40 phage prior to exposure to the biosensor, concentration-dependent inhibition was observed, indicating on biosensor high specificity toward beta-gal. Apart from a flow through mode used to deliver the samples to the surface for the SPR sensor, batch mode sensing was also employed to study the binding of beta-gal to immobilized phage on the SPR sensor surface. Experiments using a flow through mode provided more consistent results in the full dose range and showed higher sensitivity as opposed to the batch mode studies. The mean K(d) and binding valences for the flow through mode studies was 1.3+/-0.001 nM and 1.5+/-0.03, in comparison to 26+/-0.003 nM and 2.4+/-0.01 for the batch mode studies. The average thickness of phage 1G40 adlayer deposited through flow through and batch mode was 3+/-0.002 and 0.66+/-0.001 nm, respectively.

Development of a surface plasmon resonance biosensor for the identification of Campylobacter jejuni.

The purpose of this study was to develop a biosensor based on surface plasmon resonance (SPR) for the rapid identification of C. jejuni in broiler samples. We examined the specificity and sensitivity of commercial antibodies against C. jejuni with six Campylobacter strains and six non-Campylobacter bacterial strains. Antigen-antibody interactions were studied using enzyme-linked immunosorbent assay (ELISA) and a commercially available SPR biosensor platform (Spreeta). Campylobacter cells killed with 0.5% formalin had significant lower antibody reactivity when compared to live cells, or cells inactivated with 0.5% thimerosal or heat (70 degrees C for 3 min) using ELISA. The SPR biosensor showed a good sensitivity with commercial antibodies against C. jejuni at 10(3) CFU/ml and a low cross reactivity with Salmonella serotype typhimurium. The sensitivity of the SPR was similar when testing spiked broiler meat samples. However, research is still needed to reduce the high background observed when sampling meat products.

Lytic phage as a specific and selective probe for detection of Staphylococcus aureus--A surface plasmon resonance spectroscopic study.

Rapid and reliable detection of harmful pathogens at low levels are vital due to the related environmental and economical impact. While antibodies (monoclonal or polyclonal) are successfully employed in many immunoanalysis procedures as a biorecognition element, many of them remain costly with a comparatively short shelf life and uncertain manufacturability. Additionally, they suffer from several limitations, such as susceptibility to hostile environmental stresses such as temperature, pH, ionic strength, and cross-reactivity. The development of easy available, sensitive, and robust alternative molecular recognition elements, capable of providing a very high level of selectivity are very attractive to industry and may benefit in multiple areas. Several attempts have been made to utilize fluorescent-tagged bacteriophages and phage-displayed peptides for bacterial detection. However, involvement of complex labeling and detecting procedures make these approaches time-consuming and complicated. Here, we are reporting for the first time, the label-free detection of Staphylococcus aureus using lytic phage as highly specific and selective biorecognition element and surface plasmon resonance-based SPREETA sensor as a detection platform. Lytic phage was immobilized on the gold surface of SPREETA sensor via trouble-free direct physical adsorption. The detection limit was found to be 10(4) cfu/ml. Detection specificity was investigated by an inhibition assay while selectivity was examined with Salmonella typhimurium. The preliminary results using lytic phage as a probe for bacterial detection, in combination with SPR platform are promising and hence can be employed for rapid and label-free detection of different bacterial pathogens.

Phage as a molecular recognition element in biosensors immobilized by physical adsorption.

Biosensors based on landscape phages immobilized by physical adsorption on the surface of a quartz crystal microbalance was used for detection of beta-galactosidase from Escherichia coli. The sensor had a detection limit of a few nanomoles and a response time of a approximately 100 s over the range of 0.003-210 nM. The binding dose-response curve had a typical sigmoid shape and the signal was saturated at the beta-galactosidase concentration of about 200 nM. A marked selectivity for beta-galactosidase over BSA was observed in mixed solutions even when the concentration of BSA exceeded the concentration of beta-galactosidase by a factor of approximately 2000. The apparent value of the dissociation constant (K(d)) of the interaction of free phage with beta-galactosidase (9.1+/-0.9 pM) was smaller compared with the one calculated for the bound phage (1.7+/-0.5 nM). The binding was specific with three binding sites needed to bind a single molecule of beta-galactosidase. The K(d) obtained from the enzyme-linked immunosorbent assay (ELISA) for the phage and the monoclonal anti-beta-galactosidase antibodies were 21+/-2 and 26+/-2 nM, respectively. Although the method of physical adsorption is simpler and more economical in comparison with Langmuir-Blodgett and molecular assembling methods the performances of the sensors made by these technologies compare well. This work provides evidence that phage can be used as a recognition element in biosensors using physical adsorption method for immobilization of phage on the sensor surface.

Enzyme-encapsulated silica monolayers for rapid functionalization of a gold surface.

We report a simple and rapid method for the deposition of amorphous silica onto a gold surface. The method is based on the ability of lysozyme to mediate the formation of silica nanoparticles. A monolayer of lysozyme is deposited via non-specific binding to gold. The lysozyme then mediates the self-assembled formation of a silica monolayer. The silica formation described herein occurs on a surface plasmon resonance (SPR) gold surface and is characterized by SPR spectroscopy. The silica layer significantly increases the surface area compared to the gold substrate and is directly compatible with a detection system. The maximum surface concentration of lysozyme was found to be a monolayer of 2.6 ng/mm(2) which allowed the deposition of a silica layer of a further 2 ng/mm(2). For additional surface functionalization, the silica was also demonstrated to be a suitable matrix for immobilization of biomolecules. The encapsulation of organophosphate hydrolase (OPH) was demonstrated as a model system. The silica forms at ambient conditions in a reaction that allows the encapsulation of enzymes directly during silica formation. OPH was successfully encapsulated within the silica particles and a detection limit for the substrate, paraoxon, using the surface-encapsulated enzyme was found to be 20 microM.