RESUMEN
Selection strategies are performed post-fertilization when the random combination of paternal and maternal genomes has already occurred. It would be greatly advantageous to eliminate meiotic uncertainty by selecting genetically superior gametes before fertilization. To achieve this goal, haploid embryonic cells and embryonic stem cell lineages could be derived, genotyped, and used to substitute gametes. On the paternal side, androgenetic development can be achieved by removing the maternal chromosomes from the oocyte before or after fertilization. We have shown that once developed into an embryo, haploid cells can be removed for genotyping and, if carrying the selected genome, be used to replace sperm at fertilization. A similar strategy can be used on the maternal side by activating the oocyte parthenogenetically and using some embryonic cells for genotyping while the remaining are used to produce diploid embryos by fertilization. Placed together, both androgenetic and parthenogenetic haploid cells that have been genotyped to identify optimal genomes can be used to produce offspring with predetermined genomes. Successes and problems in developing such a breeding platform to achieve this goal are described and discussed below.
RESUMEN
Mechanical properties of traditional engineering materials are typically coupled to each other, presenting a challenge to practitioners with multi-dimensional material property requirements. In this work, continuous, independent control over multiple mechanical properties is demonstrated in composite materials realized using additive manufacturing. For the first time, composites additively manufactured from rigid plastic, soft elastomer, and liquid constituents are experimentally characterized, demonstrating materials which span four orders of magnitude in modulus and two orders of magnitude in toughness. By forming analytical mappings between relative concentrations of constituents at the microscale and resulting macroscale material properties, inverse material design is enabled; the method is showcased by printing artifacts with prescribed toughness and elasticity distributions. The properties of these composites are placed in the context of biological tissues, showing they have promise as mechanically plausible tissue mimics.
RESUMEN
We investigated intra-host genetic evolution using two SARS-CoV-2 isolates from a fully vaccinated (primary schedule x2 doses of AstraZeneca plus a booster of Pfizer), >70-year-old woman with a history of lymphoma and hypertension who presented a SARS-CoV-2 infection for 3 weeks prior to death due to COVID-19. Two full genome sequences were determined from samples taken 13 days apart with both belonging to Pango lineage FL.2: the first detection of this Omicron sub-variant in Botswana. FL.2 is a sub-lineage of XBB.1.9.1. The repertoire of mutations and minority variants in the Spike protein differed between the two time points. Notably, we also observed deletions within the ORF1a and Membrane proteins; both regions are associated with high T-cell epitope density. The internal milieu of immune-suppressed individuals may accelerate SARS-CoV-2 evolution; hence, close monitoring is warranted.
Asunto(s)
COVID-19 , Femenino , Humanos , Anciano , SARS-CoV-2/genética , Botswana , Infección IrruptivaRESUMEN
Motivated by the need to develop more informative and data-rich patient-specific presurgical planning models, we present a high-resolution method that enables the tangible replication of multimodal medical data. By leveraging voxel-level control of multimaterial three-dimensional (3D) printing, our method allows for the digital integration of disparate medical data types, such as functional magnetic resonance imaging, tractography, and four-dimensional flow, overlaid upon traditional magnetic resonance imaging and computed tomography data. While permitting the explicit translation of multimodal medical data into physical objects, this approach also bypasses the need to process data into mesh-based boundary representations, alleviating the potential loss and remodeling of information. After evaluating the optical characteristics of test specimens generated with our correlative data-driven method, we culminate with multimodal real-world 3D-printed examples, thus highlighting current and potential applications for improved surgical planning, communication, and clinical decision-making through this approach.
RESUMEN
Haploid embryos have contributed significantly to our understanding of the role of parental genomes in development and can be applied to important biotechnology for human and animal species. However, development to the blastocyst stage is severely hindered in bovine haploid androgenetic embryos (hAE). To further our understanding of such developmental arrest, we performed a comprehensive comparison of the transcriptomic profile of morula-stage embryos, which were validated by quantitative reverse transcription-polymerase chain reaction (qRT-PCR) of transcripts associated with differentiation in haploid and biparental embryos. Among numerous disturbances, results showed that pluripotency pathways, especially the wingless-related integration site (WNT) signaling, were particularly unbalanced in hAE. Moreover, transcript levels of KLF4, NANOG, POU5F1, SOX2, CDX2, CTNNBL1, AXIN2, and GSK3B were noticeably altered in hAE, suggesting disturbance of pluripotency and canonical WNT pathways. To evaluate the role of WNT on hAE competence, we exposed early Day-5 morula stage embryos to the GSK3B inhibitor CHIR99021. Although no alterations were observed in pluripotency and WNT-related transcripts, exposure to CHIR99021 improved their ability to reach the blastocysts stage, confirming the importance of the WNT pathway in the developmental outcome of bovine hAE.
Asunto(s)
Regulación del Desarrollo de la Expresión Génica , Vía de Señalización Wnt , Humanos , Animales , Bovinos , Vía de Señalización Wnt/genética , Haploidia , Diferenciación Celular/genética , Blastocisto/metabolismo , Desarrollo Embrionario/genéticaRESUMEN
Mechanisms of cell reprogramming by pluripotency-related transcription factors or nuclear transfer seem to be mediated by similar pathways, and the study of the contribution of OCT4 and SOX2 in both processes may help elucidate the mechanisms responsible for pluripotency. Bovine fibroblasts expressing exogenous OCT4 or SOX2, or both, were analyzed regarding the expression of pluripotency factors and imprinted genes H19 and IGF2R, and used for in vitro reprogramming. The expression of the H19 gene was increased in the control sorted group, and putative iPSC-like cells were obtained when cells were not submitted to cell sorting. When sorted cells expressing OCT4, SOX2, or none (control) were used as donor cells for somatic cell nuclear transfer, fusion rates were 60.0% vs. 64.95% and 70.53% vs. 67.24% for SOX2 vs. control and OCT4 vs. control groups, respectively; cleavage rates were 66.66% vs. 81.68% and 86.47% vs. 85.18%, respectively; blastocyst rates were 33.05% vs. 44.15% and 52.06% vs. 44.78%, respectively. These results show that the production of embryos by NT resulted in similar rates of in vitro developmental competence compared to control cells regardless of different profiles of pluripotency-related gene expression presented by donor cells; however, induced reprogramming was compromised after cell sorting.
RESUMEN
Hepatic microenvironment plays an essential role in liver regeneration, providing the necessary conditions for cell proliferation, differentiation and tissue rearrangement. One of the key factors for hepatic tissue reconstruction is the extracellular matrix (ECM), which through collagenous and non-collagenous proteins provide a three-dimensional structure that confers support for cell adhesion and assists on their survival and maintenance. In this scenario, placental ECM may be eligible for hepatic tissue reconstruction, once these scaffolds hold the major components required for cell support. Therefore, this preliminary study aimed to access the possibility of mouse embryonic stem cells differentiation into hepatocyte-like cells on placental scaffolds in a three-dimensional dynamic system using a Rotary Cell Culture System. Following a four-phase differentiation protocol that simulates liver embryonic development events, the preliminary results showed that a significant quantity of cells adhered and interacted with the scaffold through outer and inner surfaces. Positive immunolabelling for alpha fetus protein and CK7 suggest presence of hepatoblast phenotype cells, and CK18 and Albumin positive immunolabelling suggest the presence of hepatocyte-like phenotype cells, demonstrating the presence of a heterogeneous population into the recellularized scaffolds. Periodic Acid Schiff-Diastase staining confirmed the presence of glycogen storage, indicating that differentiate cells acquired a hepatic-like phenotype. In conclusion, these preliminary results suggested that mouse placental scaffolds might be used as a biological platform for stem cells differentiation into hepatic-like cells and their establishment, which may be a promissing biomaterial for hepatic tissue reconstruction.
Asunto(s)
Placenta , Andamios del Tejido , Femenino , Embarazo , Animales , Ratones , Proyectos Piloto , Andamios del Tejido/química , Hígado/metabolismo , Hepatocitos/metabolismo , Diferenciación Celular , Células Madre Embrionarias , Matriz Extracelular/metabolismoRESUMEN
We sought to investigate whether SARS-CoV-2 was present, and to perform full-length genomic sequencing, in a 5-year-old male crossbreed dog from Gaborone, Botswana that presented overt clinical signs (flu-like symptoms, dry hacking cough and mild dyspnoea). It was only sampled a posteriori, because three adult owners were diagnosed with SARS-CoV-2 infection. Next-generation sequencing based on Oxford Nanopore Technology (ONT) was performed on amplicons that were generated using a reverse transcriptase real-time polymerase chain reaction (RT-qPCR) of confirmed positive SARS-CoV-2 nasopharyngeal and buccal swabs, as well as a bronchoalveolar lavage with mean real cycle threshold (qCt) value of 36 based on the Nucleocapsid (N) gene. Descriptive comparisons to known sequences in Botswana and internationally were made using mutation profiling analysis and phylogenetic inferences. Human samples were not available. A near-full length SARS-CoV-2 genome (â¼90% coverage) was successfully genotyped and classified under clade 20 O and Pango-Lineage AY.43 (Pango v.4.0.6 PLEARN-v1.3; 2022-04-21), which is a sublineage of the Delta variant of concern (VOC) (formerly called B.1.617.2, first detected in India). We did not identify novel mutations that may be used to distinguish SARS-CoV-2 isolates from the dog and humans. In addition to Spike (S) region mutation profiling, we performed phylogenetic analysis including 30 Delta sequences publicly available reference also isolated from dogs. In addition, we performed another exploratory analysis to investigate the phylogenetic relatedness of sequence isolated from dog with those from humans in Botswana (n = 1303) as of 31 March 2022 and of same sublineage. Expectedly, the sequence formed a cluster with Delta sublineages - AY.43, AY.116 and B.1.617.2 - circulating in same time frame. This is the first documented report of human-associated SARS-CoV-2 infection in a dog in Botswana. Although the direction of transmission remains unknown, this study further affirms the need for monitoring pets during different COVID-19 waves for possible clinically relevant SARS-CoV-2 transmissions between species.
Asunto(s)
COVID-19 , Enfermedades de los Perros , Lobos , Humanos , Masculino , Perros , Animales , SARS-CoV-2/genética , Botswana/epidemiología , COVID-19/veterinaria , Filogenia , Enfermedades de los Perros/diagnóstico , Enfermedades de los Perros/epidemiologíaRESUMEN
Cloning by somatic cell Nuclear Transfer (SCNT) is a powerful technology capable of reprograming terminally differentiated cells to totipotency for generating whole animals or pluripotent stem cells for use in cell therapy, drug screening, and other biotechnological applications. However, the broad usage of SCNT remains limited due to its high cost and low efficiency in obtaining live and healthy offspring. In this chapter, we first briefly discuss the epigenetic constraints responsible for the low efficiency of SCNT and current attempts to overcome them. We then describe our bovine SCNT protocol for delivering live cloned calves and addressing basic questions about nuclear reprogramming. Other research groups can benefit from our basic protocol and build up on it to improve SCNT in the future. Strategies to correct or mitigate epigenetic errors (e.g., correcting imprinting loci, overexpression of demethylases, chromatin-modifying drugs) can integrate the protocol described here.
Asunto(s)
Técnicas de Transferencia Nuclear , Células Madre Pluripotentes , Bovinos , Animales , Técnicas de Transferencia Nuclear/veterinaria , Clonación de Organismos/métodos , Biotecnología , Clonación MolecularRESUMEN
PURPOSE: Medical school admissions interviews are a critical form of assessment; however, the most effective interview strategy is debated. This study compares the traditional interview (TI) and multiple mini-interview (MMI) within a hybrid TI-MMI model at one medical school to determine whether the interview approaches reveal different information about applicants and whether a hybrid model results in a more diversified applicant pool. METHOD: Admissions data from 3 application cycles at the Donald and Barbara Zucker School of Medicine at Hofstra/Northwell were used. The TI was used in 2017-2018 and the hybrid TI-MMI model in 2018-2019 and 2019-2020. Applicants were scored on a 5-point scale and referred to a voting committee for acceptance consideration if interview scores met threshold criteria. Changes in the number of students referred to the committee using the TI vs the TI-MMI score criteria were analyzed. RESULTS: In 2017-2018 (TI only), 683 applicants were interviewed; in 2018-2019 (TI-MMI), 844 applicants were interviewed; and in 2019-2020 (TI-MMI), 805 applicants were interviewed. Medium correlations were found between total MMI and TI scores in 2018-2019 ( ρ = 0.37, P < .001) and 2019-2020 ( ρ = 0.33, P < .001). No differences were found in TI scores between 2017-2018 and 2018-2019 ( P = .30), but TI scores were significantly lower in 2019-2020 vs 2017-2018 ( P < .001) and 2018-2019 ( P = .002). Overall, a 10% to 18% increase was found in the number of applicants referred to the voting committee when using hybrid criteria, with a 19% to 27% increase in underrepresented in medicine applicants. CONCLUSIONS: The TI-MMI model may allow for a more holistic interview approach and an expanded pool of applicants, particularly underrepresented in medicine applicants, considered for acceptance.
Asunto(s)
Medicina , Facultades de Medicina , Humanos , Criterios de Admisión Escolar , Estudiantes , Instituciones de SaludRESUMEN
Thermal bubble-driven micro-pumps are an upcoming actuation technology that can be directly integrated into micro/mesofluidic channels to displace fluid without any moving parts. These pumps consist of high power micro-resistors, which we term thermal micro-pump (TMP) resistors, that locally boil fluid at the resistor surface in microseconds creating a vapor bubble to perform mechanical work. Conventional fabrication approaches of thermal bubble-driven micro-pumps and associated microfluidics have utilized semiconductor micro-fabrication techniques requiring expensive tooling with long turn around times on the order of weeks to months. In this study, we present a low-cost approach to rapidly fabricate and test thermal bubble-driven micro-pumps with associated microfluidics utilizing commercial substrates (indium tin oxide, ITO, and fluorine doped tin oxide, FTO, coated glass) and tooling (laser cutter). The presented fabrication approach greatly reduces the turn around time from weeks/months for conventional micro-fabrication to a matter of hours/days allowing acceleration of thermal bubble-driven micro-pump research and development (R&D) learning cycles.
RESUMEN
Besides their canonical roles as energy sources, short-chain fatty acids act as metabolic regulators of gene expression through histone posttranslational modifications. Ketone body ß-hydroxybutyrate (BHB) causes a novel epigenetic modification, histone lysine ß-hydroxybutyrylation (Kbhb), which is associated with genes upregulated in starvation-responsive metabolic pathways. Dairy cows increase BHB in early lactation, and the effects of this increase on cellular epigenomes are unknown. We searched for and identified that Kbhb is present in bovine tissues in vivo and confirmed that this epigenetic mark is responsive to BHB in bovine and human fibroblasts cultured in vitro in a dose-dependent manner. Maturation of cumulus-oocyte complexes with high concentrations of BHB did not affect the competence to complete meiotic maturation or to develop until the blastocyst stage. BHB treatment strongly induced H3K9bhb in cumulus cells, but faintly in oocytes. RNA-seq analysis in cumulus cells indicated that BHB treatment altered the expression of 345 genes. The downregulated genes were mainly involved in glycolysis and ribosome assembly pathways, while the upregulated genes were involved in mitochondrial metabolism and oocyte development. The genes and pathways altered by BHB will provide entry points to carry out functional experiments aiming to mitigate metabolic disorders and improve fertility in cattle.
Asunto(s)
Ácido 3-Hidroxibutírico , Células del Cúmulo , Epigénesis Genética , Histonas , Lisina , Oocitos , Ácido 3-Hidroxibutírico/metabolismo , Ácido 3-Hidroxibutírico/farmacología , Animales , Bovinos , Células del Cúmulo/metabolismo , Femenino , Histonas/metabolismo , Humanos , Lisina/metabolismo , Oocitos/metabolismoRESUMEN
Three lineages (BA.1, BA.2 and BA.3) of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) Omicron variant of concern predominantly drove South Africa's fourth Coronavirus Disease 2019 (COVID-19) wave. We have now identified two new lineages, BA.4 and BA.5, responsible for a fifth wave of infections. The spike proteins of BA.4 and BA.5 are identical, and similar to BA.2 except for the addition of 69-70 deletion (present in the Alpha variant and the BA.1 lineage), L452R (present in the Delta variant), F486V and the wild-type amino acid at Q493. The two lineages differ only outside of the spike region. The 69-70 deletion in spike allows these lineages to be identified by the proxy marker of S-gene target failure, on the background of variants not possessing this feature. BA.4 and BA.5 have rapidly replaced BA.2, reaching more than 50% of sequenced cases in South Africa by the first week of April 2022. Using a multinomial logistic regression model, we estimated growth advantages for BA.4 and BA.5 of 0.08 (95% confidence interval (CI): 0.08-0.09) and 0.10 (95% CI: 0.09-0.11) per day, respectively, over BA.2 in South Africa. The continued discovery of genetically diverse Omicron lineages points to the hypothesis that a discrete reservoir, such as human chronic infections and/or animal hosts, is potentially contributing to further evolution and dispersal of the virus.
Asunto(s)
COVID-19 , SARS-CoV-2 , Aminoácidos , Animales , COVID-19/epidemiología , Humanos , SARS-CoV-2/genética , Sudáfrica/epidemiología , Glicoproteína de la Espiga del Coronavirus/genéticaRESUMEN
The Princess Marina Hospital in Gaborone, Botswana, had an outbreak of COVID-19 from early August 2020. The aim of this paper was to describe the outbreak investigation. The investigation's specific objectives were to describe the COVID-19 cases in terms of person, place, and time (PPT) and to determine measures to prevent further transmission of the infection. The data reported herein were collected over a 3-month period from beginning of August to end of October 2020. The investigation included all COVID-19 cases i.e. both patients and healthcare workers. It followed the steps of an outbreak investigation. These included assembling an investigation team comprising both the hospital and DHMT staff. All the wards reported their confirmed cases to the infection control team who in turn prepared line lists and case reports. Epicurves were produced from date of positive result. A total of 193 cases were reported, of which 110 (57.0%) were patients and 83 (43.0%) were healthcare workers. The median age was 35 years. Females accounted for 154 (79.8%) participants. Most of the wards were affected. The wards with the highest numbers of cases were female medical ward (39), emergency department (24), gynecology ward (17), and pediatric medical ward (10). Control measures included restricting movement into the hospital as well as clinical screening at all entry points. Furthermore, all patients were tested before admission into the wards. Surveillance of COVID-19 cases was continued beyond the 3 months reported in this paper. COVID-19 can spread rapidly in hospital settings affecting both patients and healthcare workers. Outbreak investigations including describing cases in terms of person, place, and time are critical if the most effective and efficient control measures are to be implemented.
RESUMEN
Most applications of 3-dimensional (3D) printing for presurgical planning have been limited to bony structures and simple morphological descriptions of complex organs due to the fundamental limitations in accuracy, quality, and efficiency of the current modeling paradigm. This has largely ignored the soft tissue critical to most surgical specialties where the interior of an object matters and anatomical boundaries transition gradually. Therefore, the needs of the biomedical industry to replicate human tissue, which displays multiple scales of organization and varying material distributions, necessitate new forms of representation. Presented here is a novel technique to create 3D models directly from medical images, which are superior in spatial and contrast resolution to current 3D modeling methods and contain previously unachievable spatial fidelity and soft tissue differentiation. Also presented are empirical measurements of novel, additively manufactured composites that span the gamut of material stiffnesses seen in soft biological tissues from MRI and CT. These unique volumetric design and printing methods allow for deterministic and continuous adjustment of material stiffness and color. This capability enables an entirely new application of additive manufacturing to presurgical planning: mechanical realism. As a natural complement to existing models that provide appearance matching, these new models also allow medical professionals to "feel" the spatially varying material properties of a tissue simulant-a critical addition to a field in which tactile sensation plays a key role.
Asunto(s)
Imagen por Resonancia Magnética , Impresión Tridimensional , HumanosRESUMEN
Tissue engineering is gaining use to investigate the application of its techniques for infertility treatment. The use of pluripotent embryonic cells for in vitro production of viable spermatozoa in testicular scaffolds is a promising strategy that could solve male infertility. Due to cell-extracellular matrix (ECM) interactions, here we aim to investigate the differentiation of embryoid bodies (EBs) in cultured into decellularized rat testis scaffolds. Decellularized testis (P = 0.019) with a low concentration of gDNA (30.58 mg/ng tissue) was obtained by sodium dodecyl sulfate perfusion. The structural proteins (collagens type I and III) and the adhesive glycoproteins of ECM (laminin and fibronectin) were preserved according to histological and scanning electron microscopy (SEM) analyses. Then, decellularized rat testis were cultured for 7 days with EB, and EB mixed with retinoic acid (RA) in non-adherent plates. By SEM, we observe that embryonic stem cells adhered in the decellularized testis ECM. By immunofluorescence, we verified the positive expression of HSD17B3, GDNF, ACRV-1, and TRIM-36, indicating their differentiation using RA in vitro, reinforcing the possibility of EB in male germ cell differentiation. Finally, recellularized testis ECM may be a promising tool for future new approaches for testicular cell differentiation applied to assisted reproduction techniques and infertility treatment.Abbreviations: ACRV-1: Acrosomal vesicle protein 1; ATB: Penicillin-streptomycin; DAPI: 4,6-Diamidino-2-phenylindole; EB: Embryoid bodies; ECM: Extracellular matrix; ESCs: Pluripotent embryonic stem cells; GAGs: Glycosaminoglycans; gDNA: Genomic DNA; GDNF: Glial cell line-derived neurotrophic factor; H&E: Hematoxylin and eosin; HSD17B3: 17-beta-Hydroxysteroid dehydrogenase type 3; PBS: Phosphate-buffered saline; PGCLCs: Primordial germ-cell-like cells; RA: Retinoic acid; SDS: Sodium dodecyl sulfate; SEM: Scanning electron microscopy; SSCs: Spermatogonial stem cells; TRIM-36: Tripartite Motif Containing 36.
Asunto(s)
Cuerpos Embrioides , Ingeniería de Tejidos , Animales , Diferenciación Celular , Matriz Extracelular , Masculino , Ratas , Testículo , Andamios del TejidoRESUMEN
Nearly all applications of 3D printing for surgical planning have been limited to bony structures and simple morphological descriptions of complex organs due to the fundamental limitations in accuracy, quality, and efficiency of the current modeling paradigms and technologies. Current approaches have largely ignored the constitution of soft tissue critical to most surgical specialties where multiple high-resolution variations transition gradually across the interior of the volume. Differences in the scales of organization related to unique organs require special attention to capture fine features critical to surgical procedures. We present a six-material bitmap printing technique for creating 3D models directly from medical images, which are superior in spatial and contrast resolution to current 3D modeling methods, and contain previously unachievable spatial fidelity for soft tissue differentiation. A retrospective exempt IRB was obtained for all data through the Colorado Multiple Institution Review Board #21-3128.
RESUMEN
Cell communication within the ovarian follicle is crucial during folliculogenesis to assure an ideal environment for the oocyte to achieve full developmental competence. Intercellular communication is facilitated by the presence of follicular fluid, which mediates the transfer of signaling molecules. Recently, extracellular vesicles (exosomes and microvesicles) containing mRNAs, miRNAs and proteins were described in mammalian follicular fluid. Besides these molecules, extracellular vesicles (EVs) can mediate the transfer of lipids that can act as signal transducers activating second messengers and modulating intracellular pathways. Our goal was to determine the lipid profile of exosomes (small extracellular vesicles) and microvesicles (large extracellular vesicles) from bovine ovarian follicles containing oocytes with different developmental capabilities to verify potential relationships to competence. Using mass spectrometry, we examined the lipid content of EVs present in the follicular fluid of follicles enclosing oocytes that were either unable to cleave (NCLEAVE), arrested at cleavage stage (CLEAVE), or developed to the blastocyst stage (BLAST) after parthenogenetic activation. Although most of the 514 lipids identified in the follicular fluid EVs were common among all groups, 10 exosome-derived lipids and 15 microvesicle-derived lipids were present exclusively in the BLAST group, suggesting a potential relationship with developmental competence. Therefore, our data indicate that the EVs present in follicular fluid of antral follicles of similar morphology contain lipids that may be used as biomarkers associated with the developmental capability of the oocyte to develop to the blastocyst stage.
Asunto(s)
Vesículas Extracelulares , Oogénesis , Animales , Bovinos , Comunicación Celular , Femenino , Líquido Folicular , Lípidos , OocitosRESUMEN
Mammalian uniparental embryos are efficient models for genome imprinting research and allow studies on the contribution of the paternal and maternal genomes to early embryonic development. In this study, we analyzed different methods for production of bovine haploid androgenetic embryos (hAE) to elucidate the causes behind their poor developmental potential. Results indicate that hAE can be efficiently generated by using intracytoplasmic sperm injection and oocyte enucleation at telophase II. Although androgenetic haploidy does not disturb early development up to around the 8-cell stage, androgenetic development is disturbed after the time of zygote genome activation and hAE that reach the morula stage are less capable to reach the blastocyst stage of development. Karyotypic comparisons to parthenogenetic- and ICSI-derived embryos excluded chromosomal segregation errors as causes of the developmental constraints of hAE. However, analysis of gene expression indicated abnormal levels of transcripts for key long non-coding RNAs involved in X chromosome inactivation and genomic imprinting of the KCNQ1 locus, suggesting an association with X chromosome and some imprinted loci. Moreover, transcript levels of methyltransferase 3B were significantly downregulated, suggesting potential anomalies in hAE establishing de novo methylation. Finally, the methylation status of imprinted control regions for XIST and KCNQ1OT1 genes remained hypomethylated in hAE at the morula and blastocyst stages, confirming their origin from spermatozoa. Thus, our results exclude micromanipulation and chromosomal abnormalities as major factors disturbing the normal development of bovine haploid androgenotes. In addition, although the cause of the arrest remains unclear, we have shown that the inefficient development of haploid androgenetic bovine embryos to develop to the blastocyst stage is associated with abnormal expression of key factors involved in X chromosome activity and genomic imprinting.
RESUMEN
The efficiency of producing embryos using in vitro technologies in livestock species rarely exceeds the 30-40% threshold, indicating that the proportion of oocytes that fail to develop after in vitro fertilization and culture is considerably large. Considering that the intrinsic quality of the oocyte is one of the main factors affecting blastocyst yield, the precise identification of noninvasive cellular or molecular markers that predict oocyte competence is of major interest to research and practical applications. The aim of this review was to explore the current literature on different noninvasive markers associated with oocyte quality in the bovine model. Apart from some controversial findings, the presence of cycle-related structures in ovaries, a follicle size between 6 and 10 mm, large number of surrounding cumulus cells, slightly expanded investment without dark areas, large oocyte diameter (>120 microns), dark cytoplasm, and the presence of a round and smooth first polar body have been associated with better competence. In addition, the combination of oocyte and zygote selection via brilliant cresyl blue (BCB) test, spindle imaging, and the anti-Stokes Raman scattering microscopy together with studies decoding molecular cues in oocyte maturation have the potential to further optimize the identification of oocytes with better developmental competence for in-vitro-derived technologies in livestock species.