RESUMEN
The broadband UV photochemistry kinetics of acetylacetaldehyde, the hybrid form between malonaldehyde and acetylacetone (the two other most simple molecules exhibiting an intramolecular proton transfer), trapped in four cryogenic matrices, neon, nitrogen, argon, and xenon, has been followed by FTIR and UV spectroscopy. After deposition, only the two chelated forms are observed while they isomerize upon UV irradiation toward nonchelated species. From previous UV irradiation effects, we have already identified several nonchelated isomers, capable, in turn, of isomerizing and fragmenting; even fragmentation seems to be most unlikely due to cryogenic cages confinement. Based on these findings, we have attempted an approach to understand the reaction path of electronic relaxation. Indeed, we have demonstrated, in previous studies, that in the case of malonaldehyde, this electronic relaxation pathway proceeds through singlet states while it proceeds through triplet ones in the case of acetylacetone. We observed CO and CO2 formations when photochemistry is almost observed among nonchelated forms, i.e., when the parent molecule is almost totally consumed. In order to identify a triplet state transition, we have tried to observe a "heavy atom effect" by increasing the weight of the matrix gas, from Ne to Xe, and to quench the T1 state by doping the matrices with O2. It appears that, as in the case of acetylacetone, it is the nonchelated forms that fragment. It also appears that these fragmentations certainly take place in the T1 triplet state and originate in an Π* â n transition.
RESUMEN
The broad band UV photochemistry of acetylacetaldehyde, the hybrid form between malonaldehyde and acetylacetone (the two other most simple molecules exhibiting an intramolecular proton transfer), trapped in four cryogenic matrices, neon, nitrogen, argon, and xenon, has been studied by IRTF spectroscopy. These experimental results have been supported by B3LYP/6-311G++(2d,2p) calculations in order to get S0 minima together with their harmonic frequencies. On those minima, we have also calculated their vibrationally resolved UV absorption spectra at the time-dependent DFT ωB97XD/6-311++G(2d,2p) level. After deposition, only the two chelated forms are observed while they isomerize upon UV irradiation toward nonchelated species. From UV irradiation effects we have identified several nonchelated isomers, capable, in turn, of isomerizing and fragmenting, even if this last phenomenon seems to be most unlikely due to cryogenic cages confinement. On the basis of these findings, we have attempted a first approach to the reaction path of electronic relaxation. It appeared that, as with acetylacetone, the path of electronic relaxation seems to involve triplet states.
RESUMEN
In the atmosphere, sea salt aerosols, containing mainly NaCl, can accumulate fatty acids and undergo heterogeneous chemistry with atmospheric nitrogen oxides. The effect of stearic acid (SA) coating on the reactivity of the NaCl(100) surface with NO2 under humidity was studied by atomic force microscopy (AFM), Raman mapping and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to highlight processes occurring on NaCl surfaces. The vapor-deposition of SA on the NaCl surface generates heterogeneous coating with discontinuous monolayer islands. The SA molecules with all-trans conformation stick to the NaCl surface through -CO2H groups and are organized in parallel between them and nearly perpendicularly to the surface. The SA coating does not prevent the NaNO3 particle formation when the sample is exposed to NO2 under low humidity conditions. The initial abilities of the NaCl surface coated with SA to pick up NO2 from the gas phase are correlated with the fraction of bare NaCl area evidencing the spatially heterogeneous reactivity of the surface. The role of H2O in the NO2 uptake and the catalytic conversion of NaCl to NaNO3 is shown. Under humidity (RH = 50%), the H2O uptake by NaNO3 particles on the coated-NaCl surface is significantly more important than that adsorbed under analogous conditions without the presence of NaNO3 particles. This unusual water absorption initiates transitions (i) from solid NaNO3 particles to NaNO3 aqueous solution and (ii) from the SA monolayer with well-ordered all trans alkyl chains to the SA gel with completely disordered conformation. This mixed SA/NaNO3 layer on the particle surface may have significant consequences on the hygroscopic properties and reactivity of the sea salt aerosols in the atmosphere.
RESUMEN
A mixture of natural and anthropogenic particles is ubiquitous in the troposphere and exerts an important influence on air quality. This work reports the study of mixing and heterogeneous chemistry of particles of natural-like mineral dust (CaCO(3)) and anthropogenic-like microparticle (PbSO(4)) in turbulent air flow under varying relative humidity. Sparse monolayers of laboratory-generated particles were collected on substrates using impaction. The grain size distribution and chemistry of micrometer-sized particles were determined as CaCO(3)-PbSO(4) internal and external mixtures by Raman imaging, scanning electron microscopy, and time-of-flight static secondary ionization mass spectrometry. The condensation of a thin water layer on mixed aggregates initiates the formation of complex internal mixtures of Pb(3)(CO(3))(2)(OH)(2), PbCO(3), CaSO(4)·2H(2)O, CaCO(3), and PbSO(4) fine particles. These heterogeneous chemistry processes which may occur in ambient air can increase dramatically the amounts of hazardous breathable particles.
Asunto(s)
Contaminantes Atmosféricos/análisis , Aire/análisis , Carbonato de Calcio/química , Plomo/química , Polvo , Monitoreo del Ambiente , Humedad , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Espectrometría Raman , AguaRESUMEN
Fine and ultrafine metallic particulate matters (PMs) are emitted from metallurgic activities in peri-urban zones into the atmosphere and can be deposited in terrestrial ecosystems. The foliar transfer of metals and metalloids and their fate in plant leaves remain unclear, although this way of penetration may be a major contributor to the transfer of metals into plants. This study focused on the foliar uptake of various metals and metalloids from enriched PM (Cu, Zn, Cd, Sn, Sb, As, and especially lead (Pb)) resulting from the emissions of a battery-recycling factory. Metal and metalloid foliar uptake by various vegetable species, exhibiting different morphologies, use (food or fodder) and life-cycle (lettuce, parsley and rye-grass) were studied. The mechanisms involved in foliar metal transfer from atmospheric particulate matter fallout, using lead (Pb) as a model element was also investigated. Several complementary techniques (micro-X-ray fluorescence, scanning electron microscopy coupled with energy dispersive X-ray microanalysis and time-of-flight secondary ion mass spectrometry) were used to investigate the localization and the speciation of lead in their edible parts, i.e. leaves. The results showed lead-enriched PM on the surface of plant leaves. Biogeochemical transformations occurred on the leaf surfaces with the formation of lead secondary species (PbCO(3) and organic Pb). Some compounds were internalized in their primary form (PbSO(4)) underneath an organic layer. Internalization through the cuticle or penetration through stomata openings are proposed as two major mechanisms involved in foliar uptake of particulate matter.
Asunto(s)
Contaminantes Atmosféricos/metabolismo , Lactuca/metabolismo , Lolium/metabolismo , Petroselinum/metabolismo , Hojas de la Planta/metabolismo , Microanálisis por Sonda Electrónica , Monitoreo del Ambiente , Fluorescencia , Plomo/metabolismo , Metaloides/metabolismo , Metales/metabolismo , Microscopía Electrónica de Rastreo , Material Particulado/análisis , Reciclaje , Espectrometría de Masa de Ion SecundarioRESUMEN
Most available studies on lead smelter emissions deal with the environmental impact of outdoor particles, but only a few focus on air quality at workplaces. The objective of this study is to physically and chemically characterize the Pb-rich particles emitted at different workplaces in a lead recycling plant. A multi-scale characterization was conducted from bulk analysis to the level of individual particles, to assess the particles properties in relation with Pb speciation and availability. Process PM from various origins were sampled and then compared; namely Furnace and Refining PM respectively present in the smelter and at refinery workplaces, Emissions PM present in channeled emissions. These particles first differed by their morphology and size distribution, with finer particles found in emissions. Differences observed in chemical composition could be explained by the industrial processes. All PM contained the same major phases (Pb, PbS, PbO, PbSO(4) and PbO·PbSO(4)) but differed on the nature and amount of minor phases. Due to high content in PM, Pb concentrations in the CaCl(2) extractant reached relatively high values (40 mg L(-1)). However, the ratios (soluble/total) of CaCl(2) exchangeable Pb were relatively low (<0.02%) in comparison with Cd (up to 18%). These results highlight the interest to assess the soluble fractions of all metals (minor and major) and discuss both total metal concentrations and ratios for risk evaluations. In most cases metal extractability increased with decreasing size of particles, in particular, lead exchangeability was highest for channeled emissions. Such type of study could help in the choice of targeted sanitary protection procedures and for further toxicological investigations. In the present context, particular attention is given to Emissions and Furnace PM. Moreover, exposure to other metals than Pb should be considered.
Asunto(s)
Monitoreo del Ambiente/métodos , Contaminación Ambiental/estadística & datos numéricos , Residuos Industriales/análisis , Plomo/química , Reciclaje/métodos , Envejecimiento/fisiología , Cristalización , Monitoreo Epidemiológico , Humanos , Intoxicación por Plomo/epidemiología , Pulmón/metabolismo , Metales/análisis , Microscopía Electrónica de Rastreo , Exposición Profesional , Tamaño de la Partícula , Medición de Riesgo , Espectrometría Raman , Difracción de Rayos XRESUMEN
Particles from channelled emissions of a battery recycling facility were size-segregated and investigated to correlate their speciation and morphology with their transfer towards lettuce. Microculture experiments carried out with various calcareous soils spiked with micronic and sub-micronic particles (1650+/-20mg Pb kg(-1)) highlighted a greater transfer in soils mixed with the finest particles. According to XRD and Raman spectroscopy results, the two fractions presented differences in the amount of minor lead compounds like carbonates, but their speciation was quite similar, in decreasing order of abundance: PbS, PbSO(4), PbSO(4) x PbO, alpha-PbO and Pb(0). Morphology investigations revealed that PM(2.5) (i.e. Particulate Matter 2.5 composed of particles suspended in air with aerodynamic diameters of 2.5 microm or less) contained many Pb nanoballs and nanocrystals which could influence lead availability. The soil-plant transfer of lead was mainly influenced by size and was very well estimated by 0.01M CaCl(2) extraction.