Toward a better understanding of ferric-oxalate complex photolysis: The role of the aqueous/air interface of droplet.

In this work, the photo reactivity of ferric oxalate (Fe(III)-Ox) complex in atmospheric particles was investigated. Raman spectroscopy was used to explore the mechanism and kinetics of Fe(III)-Ox photolysis occurring at the aqueous/gas interface, inside the droplet and in bulk solution. Ferrous carbonate (FeCO3) was detected indicating that carbonate ion (CO32-) formed inside the droplets would compete with oxalate ligands for iron complexation. A higher concentration of photoproduct Fe(II)-Ox was observed at the surface and inside of the droplets than in bulk solution. In particular, Fe(III)-Ox on the droplet surface was quickly reduced with light and Fe(II)-Ox concentration gradually decreased with irradiation time. The evolution of Fe(II)-Ox concentration was similar inside the droplet and in bulk solution with a trend of first increasing and then gradually decreasing during irradiation time. Although FeCO3 would hinder Fenton intermediate reaction, the photolysis rate of Fe(III)-Ox in droplets was almost two orders of magnitude times faster than that observed during bulk experiment. In general, the photolysis mechanism and kinetics of Fe(III)-Ox in aqueous/air interface, inside of droplet and bulk solution were distinct, and the production of oxide species from the atmospheric Fe(III)-Ox droplets was underestimated.

Interaction process between gaseous CH3I and NaCl particles: implication for iodine dispersion in the atmosphere.

Gaseous iodomethane (CH3I) is naturally emitted into the atmosphere by biological activity in oceans and during severe accidents (SAs) in nuclear power plants. In this latter case, a part of radioactive iodine such as 131I may be released. Improving the knowledge of CH3I transport and reactivity in the atmosphere is important since they are strongly linked to first the cycle of ozone and second to the dispersion of radioactive CH3I with potential radiological consequences on both the environment and human health. Here, the interaction process of CH3I with NaCl as a surrogate of atmospheric aerosols was investigated under ambient air conditions by using Diffuse Reflectance Fourier Transform Spectroscopy (DRIFTS). The DRIFTS spectra of NaCl clearly evidenced CH3I adsorption on the NaCl particle surface. A part of CH3I ((1.68 ± 0.85) × 1014 molecule per mgNaCl) was found to be strongly bonded to NaCl since no desorption was observed. The CH3I adsorption on the NaCl surface presented a 1st order kinetics relative to its gas phase concentration. The uptake coefficient was determined to be in the order of 10-11. These results show a low probability of CH3I to be taken up by halide-containing aerosols. These data are crucial for completing the iodine atmospheric chemical scheme.

Airborne foliar transfer of particular metals in Lactuca sativa L.: translocation, phytotoxicity, and bioaccessibility.

The uptake, translocation, and human bioaccessibility of metals originating from atmospheric fine particulate matters (PM) after foliar exposure is not well understood. Lettuce (Lactuca sativa L.) plants were exposed to micronic PbO, CuO, and CdO particulate matters (PMs) by the foliar pathway and mature plants (6 weeks old) were analyzed in terms of: (1) metal accumulation and localization on plant leaf surface, and metal translocation factor (TF) and global enrichment factor (GEF) in the plants; (2) shoot growth, plant dry weight (DW), net photosynthesis (Pn), stomatal conductance (Gs), and fatty acid ratio; (3) metal bioaccessibility in the plants and soil; and (4) the hazard quotient (HQ) associated with consumption of contaminated plants. Substantial levels of metals were observed in the directly exposed edible leaves and newly formed leaves of lettuce, highlighting both the possible metal transfers throughout the plant and the potential for human exposure after plant ingestion. No significant changes were observed in plant biomass after exposure to PbO, CuO, and CdO-PMs. The Gs and fatty acid ratio were increased in leaves after metal exposure. A dilution effect after foliar uptake was suggested which could alleviate metal phytotoxicity to some degree. However, plant shoot growth and Pn were inhibited when the plants are exposed to PbO, and necrosis enriched with Cd was observed on the leaf surface. Gastric bioaccessibility of plant leaves is ranked: Cd > Cu > Pb. Our results highlight a serious health risk of PbO, CuO, and CdO-PMs associated with consumption of vegetables exposed to these metals, even in newly formed leaves in the case of PbO and CdO exposure. Finally, the study highlights the fate and toxicity of metal rich-PMs, especially in the highly populated urban areas which are increasingly cultivated to promote local food.

The role of epicuticular waxes on foliar metal transfer and phytotoxicity in edible vegetables: case of Brassica oleracea species exposed to manufactured particles.

The rapid industrialization and urbanization of intra- and peri-urban areas at the world scale are responsible for the degradation of the quality of edible crops, because of their contamination with airborne pollutants. Their consumption could lead to serious health risks. In this work, we aim to investigate the phytotoxicity induced by foliar transfer of atmospheric particles of industrial/urban origin. Leaves of cabbage plants (Brassica oleracea var. Prover) were contaminated with metal-rich particles (PbSO4 CuO and CdO) of micrometer size. A trichloroacetic acid (TCA) treatment was used to inhibit the synthesis of the epicuticular waxes in order to investigate their protective role against metallic particles toxicity. Besides the location of the particles on/in the leaves by microscopic techniques, photosynthetic activity measurements, genotoxicity assessment, and quantification of the gene expression have been studied for several durations of exposure (5, 10, and 15 days). The results show that the depletion of epicuticular waxes has a limited effect on the particle penetration in the leaf tissues. The stomatal openings appear to be the main pathway of particles entry inside the leaf tissues, as demonstrated by the overexpression of the BolC.CHLI1 gene. The effects of particles on the photosynthetic activity are limited, considering only the photosynthetic Fv/Fm parameter. The genotoxic effects were significant for the contaminated TCA-treated plants, especially after 10 days of exposure. Still, the cabbage plants are able to implement repair mechanisms quickly, and to thwart the physiological effects induced by the particles. Finally, the foliar contamination by metallic particles induces no serious damage to DNA, as observed by monitoring the BolC.OGG1 gene.

Photodegradation of methyl thioglycolate particles as a proxy for organosulphur containing droplets.

Understanding the formation and transformation of sulphur-rich particles is of prime importance since they contribute to the global atmospheric sulphur budget. In this work, we performed a series of experiments on a photoactive organosulphur compound namely, methyl thioglycolate, as a model of an organosulphur species of marine origin. By investigating the photoproducts within levitated droplets, we showed that elemental sulphur (α-S8) and sulphate (SO42-) can be photochemically generated at the gas-liquid interface by heterogeneous interaction with gaseous O2 and H2O. These results demonstrate that the surface of levitated droplets facilitate the oxidation of methyl thioglycolate in the dark, while illumination is necessary to produce the oxidation in bulk experiments.

Influence of collecting substrate on the Raman imaging of micron-sized particles.

The influence of six common substrates on the Raman imaging of micron-sized inorganic aerosol particles was examined. Laboratory-generated single-component particles of calcite (CaCO3) and mixed particles of calcite (CaCO3), nitratine (NaNO3), hematite (Fe2O3) and anglesite (PbSO4) were deposited by cascade impaction on Ag, In, Si, SiO2, microscope slide and TEM-grid substrates. The spectral contribution of substrates to Raman images of the deposited particles was evaluated by Multivariate Curve Resolution. The shape and intensity of the substrate spectra affect the effectiveness capability of the spectral deconvolution. The substrates were characterized and compared with respect to their effect on the reconstruction of Raman images of aerosol particles. The TEM-grid substrate yielded spatially stable sample measurements with a homogeneous spectral contribution, satisfactory Raman map reconstruction and the potential for application in other techniques (e.g., SEM-EDX).

Copper Oxide Nanoparticle Foliar Uptake, Phytotoxicity, and Consequences for Sustainable Urban Agriculture.

Throughout the world, urban agriculture supplies fresh local vegetables to city populations. However, the increasing anthropogenic uses of metal-containing nanoparticles (NPs) such as CuO-NPs in urban areas may contaminate vegetables through foliar uptake. This study focused on the CuO-NP transfer processes in leafy edible vegetables (i.e., lettuce and cabbage) to assess their potential phytotoxicity. Vegetables were exposed via leaves for 5, 10, or 15 days to various concentrations of CuO-NPs (0, 10, or 250 mg per plant). Biomass and gas exchange values were determined in relation to the Cu uptake rate, localization, and Cu speciation within the plant tissues. High foliar Cu uptake occurred after exposure for 15 days for lettuce [3773 mg (kg of dry weight)-1] and cabbage [4448 mg (kg of dry weight)-1], along with (i) decreased plant weight, net photosynthesis level, and water content and (ii) necrotic Cu-rich areas near deformed stomata containing CuO-NPs observed by scanning electron microscopy and energy dispersive X-ray microanalysis. Analysis of the CuO-NP transfer rate (7.8-242 µg day-1), translocation of Cu from leaves to roots and Cu speciation biotransformation in leaf tissues using electron paramagnetic resonance, suggests the involvement of plant Cu regulation processes. Finally, a potential health risk associated with consumption of vegetables contaminated with CuO-NPs was highlighted.

Lead distribution in soils impacted by a secondary lead smelter: Experimental and modelling approaches.

Smelting activities are one of the most common sources of trace elements in the environment. The aim of this study was to determine the lead distribution in upper horizons (0-5 and 5-10cm) of acidic soils in the vicinity of a lead-acid battery recycling plant in northern France. The combination of chemical methods (sequential extractions), physical methods (Raman microspectroscopy and scanning electron microscopy with an energy dispersive spectrometer) and multi-surface complexation modelling enabled an assessment of the behaviour of Pb. Regardless of the studied soil, none of the Pb-bearing phases commonly identified in similarly polluted environments (e.g., anglesite) were observed. Lead was mainly associated with organic matter and manganese oxides. The association of Pb with these soil constituents can be interpreted as evidence of Pb redistribution in the studied soils following smelter particle deposition.

B-α-[AsW9O33](9-) polyoxometalates incorporating hexanuclear uranium {U6O8}-like clusters bearing the U(IV) form or unprecedented mixed valence U(IV)/U(VI) involving direct U(VI)=O-U(IV) bonding.

The use of B-α-[AsW9O33](9-) anionic moieties in association with the tetravalent 5f uranium UCl4 precursor affords three new hexanuclear uranium {U6O8}-like clusters embedded in a polyoxometalate architecture. Two of them are constituted by an unprecedented uranium mixed valence U(IV)/U(VI) cluster.

Combining microscopy with spectroscopic and chemical methods for tracing the origin of atmospheric fallouts from mining sites.

Populations living close to mining sites are often exposed to important heavy metal concentrations, especially through atmospheric fallouts. Identifying the main sources of metal-rich particles remains a challenge because of the similarity of the particle signatures from the polluted sites. This work provides an original combination of physical and chemical methods to determine the main sources of airborne particles impacting inhabited zones. Raman microspectrometry (RMS), X-ray diffraction (DRX), morphology analyses by microscopy and chemical composition were assessed. Geochemical analysis allowed the identification of target and source areas; XRD and RMS analysis identified the main mineral phases in association with their metal content and speciation. The characterization of the dominant minerals was combined with particle morphology analysis to identify fallout sources. The complete description of dust morphologies permitted the successful determination of a fingerprint of each source site. The analysis of these chemical and morphological fingerprints allowed identification of the mine area as the main contributor of metal-rich particles impacting the inhabited zone. In addition to the identification of the main sources of airborne particles, this study will also permit to better define the extent of polluted zones requiring remediation or protection from eolian erosion inducing metal-rich atmospheric fallouts.

Pushing back the limits of Raman imaging by coupling super-resolution and chemometrics for aerosols characterization.

The increasing interest in nanoscience in many research fields like physics, chemistry, and biology, including the environmental fate of the produced nano-objects, requires instrumental improvements to address the sub-micrometric analysis challenges. The originality of our approach is to use both the super-resolution concept and multivariate curve resolution (MCR-ALS) algorithm in confocal Raman imaging to surmount its instrumental limits and to characterize chemical components of atmospheric aerosols at the level of the individual particles. We demonstrate the possibility to go beyond the diffraction limit with this algorithmic approach. Indeed, the spatial resolution is improved by 65% to achieve 200 nm for the considered far-field spectrophotometer. A multivariate curve resolution method is then coupled with super-resolution in order to explore the heterogeneous structure of submicron particles for describing physical and chemical processes that may occur in the atmosphere. The proposed methodology provides new tools for sub-micron characterization of heterogeneous samples using far-field (i.e. conventional) Raman imaging spectrometer.

Combined use of quantitative ED-EPMA, Raman microspectrometry, and ATR-FTIR imaging techniques for the analysis of individual particles.

In this work, quantitative energy-dispersive electron probe X-ray microanalysis (ED-EPMA) (called low-Z particle EPMA), Raman microspectrometry (RMS), and attenuated total reflectance Fourier transform infrared spectroscopic (ATR-FTIR) imaging were applied in combination for the analysis of the same individual airborne particles for the first time. After examining individual particles of micrometer size by low-Z particle EPMA, consecutive examinations by RMS and ATR-FTIR imaging of the same individual particles were then performed. The relocation of the same particles on Al or Ag foils was successfully carried out among the three standalone instruments for several standard samples and an indoor airborne particle sample, resulting in the successful acquisition of quality spectral data from the three single-particle analytical techniques. The combined application of the three techniques to several different standard particles confirmed that those techniques provided consistent and complementary chemical composition information on the same individual particles. Further, it was clearly demonstrated that the three different types of spectral and imaging data from the same individual particles in an indoor aerosol sample provided richer information on physicochemical characteristics of the particle ensemble than that obtainable by the combined use of two single-particle analytical techniques.

Fate of pristine TiO2 nanoparticles and aged paint-containing TiO2 nanoparticles in lettuce crop after foliar exposure.

Engineered TiO2 nanoparticles (TiO2-NPs) are present in a large variety of consumer products, and are produced in largest amount. The building industry is a major sector using TiO2-NPs, especially in paints. The fate of NPs after their release in the environment is still largely unknown, and their possible transfer in plants and subsequent impacts have not been studied in detail. The foliar transfer pathway is even less understood than the root pathway. In this study, lettuces were exposed to pristine TiO2-NPs and aged paint leachate containing TiO2-NPs and microparticles (TiO2-MPs). Internalization and in situ speciation of Ti were investigated by a combination of microscopic and spectroscopic techniques. Not only TiO2-NPs pristine and from aged paints, but also TiO2-MPs were internalized in lettuce leaves, and observed in all types of tissues. No change in speciation was noticed, but an organic coating of TiO2-NPs is likely. Phytotoxicity markers were tested for plants exposed to pristine TiO2-NPs. No acute phytotoxicity was observed; variations were only observed in glutathione and phytochelatin levels but remained low as compared to typical values. These results obtained on the foliar uptake mechanisms of nano- and microparticles are important in the perspective of risk assessment of atmospheric contaminations.

Foliar uptake and metal(loid) bioaccessibility in vegetables exposed to particulate matter.

At the global scale, high concentrations of particulate matter (PM) enriched with metal(loid)s are currently observed in the atmosphere of urban areas. Foliar lead uptake was demonstrated for vegetables exposed to airborne PM. Our main objective here was to highlight the health risk associated with the consumption of vegetables exposed to foliar deposits of PM enriched with the various metal(loid)s frequently observed in the atmosphere of urban areas (Cd, Sb, Zn and Pb). Leaves of mature cabbage and spinach were exposed to manufactured mono-metallic oxide particles (CdO, Sb2O3 and ZnO) or to complex process PM mainly enriched with lead. Total and bioaccessible metal(loid) concentrations were then measured for polluted vegetables and the various PM used as sources. Finally, scanning electronic microscopy coupled with energy dispersive X-ray microanalysis was used to study PM-phyllosphere interactions. High quantities of Cd, Sb, Zn and Pb were taken up by the plant leaves. These levels depended on both the plant species and nature of the PM, highlighting the interest of acquiring data for different plants and sources of exposure in order to better identify and manage health risks. A maximum of 2% of the leaf surfaces were covered with the PM. However, particles appeared to be enriched in stomatal openings, with up to 12% of their area occupied. Metal(loid) bioaccessibility was significantly higher for vegetables compared to PM sources, certainly due to chemical speciation changes. Taken together, these results confirm the importance of taking atmospheric PM into account when assessing the health risks associated with ingestion of vegetables grown in urban vegetable crops or kitchen gardens.

Foliar or root exposures to smelter particles: consequences for lead compartmentalization and speciation in plant leaves.

In urban areas with high fallout of airborne particles, metal uptake by plants mainly occurs by foliar pathways and can strongly impact crop quality. However, there is a lack of knowledge on metal localization and speciation in plants after pollution exposure, especially in the case of foliar uptake. In this study, two contrasting crops, lettuce (Lactuca sativa L.) and rye-grass (Lolium perenne L.), were exposed to Pb-rich particles emitted by a Pb-recycling factory via either atmospheric or soil application. Pb accumulation in plant leaves was observed for both ways of exposure. The mechanisms involved in Pb uptake were investigated using a combination of microscopic and spectroscopic techniques (electron microscopy, laser ablation, Raman microspectroscopy, and X-ray absorption spectroscopy). The results show that Pb localization and speciation are strongly influenced by the type of exposure (root or shoot pathway) and the plant species. Foliar exposure is the main pathway of uptake, involving the highest concentrations in plant tissues. Under atmospheric fallouts, Pb-rich particles were strongly adsorbed on the leaf surface of both plant species. In lettuce, stomata contained Pb-rich particles in their apertures, with some deformations of guard cells. In addition to PbO and PbSO4, chemical forms that were also observed in pristine particles, new species were identified: organic compounds (minimum 20%) and hexagonal platy crystals of PbCO3. In rye-grass, the changes in Pb speciation were even more egregious: Pb-cell wall and Pb-organic acid complexes were the major species observed. For root exposure, identified here as a minor pathway of Pb transfer compared to foliar uptake, another secondary species, pyromorphite, was identified in rye-grass leaves. Finally, combining bulk and spatially resolved spectroscopic techniques permitted both the overall speciation and the minor but possibly highly reactive lead species to be determined in order to better assess the health risks involved.

Foliar exposure of the crop Lactuca sativa to silver nanoparticles: evidence for internalization and changes in Ag speciation.

The impact of engineered nanomaterials on plants, which act as a major point of entry of contaminants into trophic chains, is little documented. The foliar pathway is even less known than the soil-root pathway. However, significant inputs of nanoparticles (NPs) on plant foliage may be expected due to deposition of atmospheric particles or application of NP-containing pesticides. The uptake of Ag-NPs in the crop species Lactuca sativa after foliar exposure and their possible biotransformation and phytotoxic effects were studied. In addition to chemical analyses and ecotoxicological tests, micro X-ray fluorescence, micro X-ray absorption spectroscopy, time of flight secondary ion mass spectrometry and electron microscopy were used to localize and determine the speciation of Ag at sub-micrometer resolution. Although no sign of phytotoxicity was observed, Ag was effectively trapped on lettuce leaves and a thorough washing did not decrease Ag content significantly. We provide first evidence for the entrapment of Ag-NPs by the cuticle and penetration in the leaf tissue through stomata, for the diffusion of Ag in leaf tissues, and oxidation of Ag-NPs and complexation of Ag(+) by thiol-containing molecules. Such type of information is crucial for better assessing the risk associated to Ag-NP containing products.

Iron speciation of airborne subway particles by the combined use of energy dispersive electron probe X-ray microanalysis and Raman microspectrometry.

Quantitative energy-dispersive electron probe X-ray microanalysis (ED-EPMA), known as low-Z particle EPMA, and Raman microspectrometry (RMS) were applied in combination for an analysis of the iron species in airborne PM10 particles collected in underground subway tunnels. Iron species have been reported to be a major chemical species in underground subway particles generated mainly from mechanical wear and friction processes. In particular, iron-containing particles in subway tunnels are expected to be generated with minimal outdoor influence on the particle composition. Because iron-containing particles have different toxicity and magnetic properties depending on their oxidation states, it is important to determine the iron species of underground subway particles in the context of both indoor public health and control measures. A recently developed analytical methodology, i.e., the combined use of low-Z particle EPMA and RMS, was used to identify the chemical species of the same individual subway particles on a single particle basis, and the bulk iron compositions of airborne subway particles were also analyzed by X-ray diffraction. The majority of airborne subway particles collected in the underground tunnels were found to be magnetite, hematite, and iron metal. All the particles collected in the tunnels of underground subway stations were attracted to permanent magnets due mainly to the almost ubiquitous ferrimagnetic magnetite, indicating that airborne subway particles can be removed using magnets as a control measure.

Heterogeneous microchemistry between CdSO4 and CaCO3 particles under humidity and liquid water.

Laboratory experiments using in situ Raman imaging combined with ex situ TOF-S-SIMS demonstrate the behavior of CdSO4·8/3H2O microparticles in contact with 101¯4 CaCO3 (calcite) surface under three different experimental conditions representative of unpolluted atmosphere. The contact of CdSO4·8/3H2O particles with CaCO3 surface in humid air (RH∼40-80%) does not induce any chemical reaction. In contrast, the condensation of a water drop on CdSO4·8/3H2O/CaCO3 interface causes the free dissolution of CdSO4·8/3H2O particle in the drop. A CdSO4·8/3H2O microcrystal is reformed after gentle drying with a CdSO4·H2O coating of the CaCO3 surface. The TOF-S-SIMS image of the CaCO3 surface provides evidence of a thin layer corresponding probably to insoluble coating of CdCO3 (otavite) or CdxCa1-xCO3 solid solution at the liquid-solid interface. This layer armours the CaCO3 from further dissolution and stops the reaction. The deposition of CdSO4·8/3H2O particle in water drop previously in contact with CaCO3 for a long time generates CdCO3 small rhombohedral crystals while gentle drying provokes the crystallization of bar shape crystals of CaSO4·2H2O (gypsum). These laboratory results provide valuable chemical prediction for a possible fate of cadmium rich particles emitted in the atmosphere and thus, can contribute to realistic assessment of human exposure to Cd hazard.

Investigation of the chemical mixing state of individual Asian dust particles by the combined use of electron probe X-ray microanalysis and Raman microspectrometry.

In this work, quantitative electron probe X-ray microanalysis (EPMA) and Raman microspectrometry (RMS) were applied in combination for the first time to characterize the complex internal structure and physicochemical properties of the same ensemble of Asian dust particles. The analytical methodology to obtain the chemical composition, mixing state, and spatial distribution of chemical species within single particles through the combined use of the two techniques is described. Asian dust aerosol particles collected in Incheon, Korea, during a moderate dust storm event were examined to assess the applicability of the methodology to resolve internal mixtures within single particles. Among 92 individual analyzed particles, EPMA and RMS identified 53% of the particles to be internally mixed with two or more chemical species. Information on the spatial distribution of chemical compounds within internally mixed individual particles can be useful for deciphering the particle aging mechanisms and sources. This study demonstrates that the characterization of individual particles, including chemical speciation and mixing state analysis, can be performed more in detail using EPMA and RMS in combination than with the two single-particle techniques alone.

Foliar lead uptake by lettuce exposed to atmospheric fallouts.

Metal uptake by plants occurs by soil-root transfer but also by direct transfer of contaminants from the atmosphere to the shoots. This second pathway may be particularly important in kitchen gardens near industrial plants. The mechanisms of foliar uptake of lead by lettuce ( Lactuca sativa ) exposed to the atmospheric fallouts of a lead-recycling plant were studied. After 43 days of exposure, the thoroughly washed leaves contained 335 +/- 50 mg Pb kg(-1) (dry weight). Micro-X-ray fluorescence mappings evidenced Pb-rich spots of a few hundreds of micrometers in diameter located in necrotic zones. These spots were more abundant at the base of the central nervure. Environmental scanning electron microscopy coupled with energy dispersive X-ray microanalysis showed that smaller particles (a few micrometers in diameter) were also present in other regions of the leaves, often located beneath the leaf surface. In addition, submicrometric particles were observed inside stomatal openings. Raman microspectrometry analyses of the leaves identified smelter-originated Pb minerals but also secondary phases likely resulting from the weathering of original particles. On the basis of these observations, several pathways for foliar lead uptake are discussed. A better understanding of these mechanisms may be of interest for risk assessment of population exposure to atmospheric metal contamination.